标准号 |
中文名称 |
英文名称 |
| ISO 1389-2-1977 |
工业用邻苯二甲酸酐.试验方法.第2部分:溶解物颜色的测定 |
(Phthalic anhydride for industrial use; Methods of test; Part II : Measurement of colour of the molten material) |
| ISO 1389-3-1977 |
工业用邻苯二甲酸酐.试验方法.第2部分:颜色稳定性的测定 |
(Phthalic anhydride for industrial use; Methods of test; Part III : Measurement of colour stability) |
| ISO 1389-4-1977 |
工业用邻苯二甲酸酐.试验方法.第4部分:用硫酸处理后颜色的测定 |
(Phthalic anhydride for industrial use; Methods of test; Part IV : Measurement of colour after treatment with sulphuric acid) |
| ISO 1389-5-1977 |
工业用邻苯二甲酸酐.试验方法.第5部分:游离酸度的测定.电位滴定法 |
(Phthalic anhydride for industrial use; Methods of test; Part V : Determination of free acidity; Potentiometric method) |
| ISO 1389-6-1977 |
工业用邻苯二甲酸酐.试验方法.第6部分:邻苯二甲酸酐含量的测定.滴定法 |
(Phthalic anhydride for industrial use; Methods of test; Part VI : Determination of phthalic anhydride content; Titrimetric method) |
| ISO 1389-7-1977 |
工业用邻苯二甲酸酐.试验方法.第7部分:顺丁烯二酸酐含量的测定.极谱法 |
(Phthalic anhydride for industrial use; Methods of test; Part VII : Determination of maleic anhydride content; Polarographic method) |
| ISO 1389-8-1977 |
工业用邻苯二甲酸酐.试验方法.第8部分:灰分的测定 |
(Phthalic anhydride for industrial use; Methods of test; Part VIII : Determination of ash) |
| ISO 1389-9-1977 |
工业用邻苯二甲酸酐.试验方法.第9部分:在冷态下可被高锰酸钾氧化的杂质含量的测定.碘量法 |
(Phthalic anhydride for industrial use; Methods of test; Part IX : Determination of impurities oxidizable in the cold by potassium permanganate; Iodometric method) |
| ISO 13894-1-2000 |
高压装饰性叠层板材.复合成份.第1部分:试验方法 |
(High-pressure decorative laminates - Composite elements - Part 1: Test methods) |
| ISO 13895-1996 |
胶粘剂.塑料的安全制备用导则 |
(Adhesives - Guidelines for the surface preparation of plastics) |
| ISO 13897 Technical Corrigendum 1-2003 |
牙科学.汞齐合金胶囊.技术勘误1 |
|
| ISO 13897-2003 |
牙科学.汞齐合金胶囊 |
(Dentistry - Amalgam capsules) |
| ISO 13897-2003 |
牙科学.汞齐合金胶囊 |
|
| ISO 13898-1-1997 |
钢和铁.镍,铜和钴含量的测定.电感耦合等离子体原子发射光谱分析法.第1部分:一般要求和试样溶解 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 1: General requirements and sample dissolution) |
| ISO 13898-2-1997 |
钢和铁.镍,铜和钴含量的测定.电感耦合等离子体原子发射光谱分析法.第2部分:镍含量的测定 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of nickel content) |
| ISO 13898-3-1997 |
钢和铁.镍,铜和钴含量的测定.电感耦合等离子体原子发射光谱分析法.第3部分:铜含量的测定 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of copper content) |
| ISO 13898-4-1997 |
钢和铁.镍,铜和钴含量的测定.电感耦合等离子体原子发射光谱分析法.第4部分:钴含量的测定 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 4: Determination of cobalt content) |
| ISO 139-1973 |
纺织品.调湿和试验用标准大气 |
(Textiles; Standard atmospheres for conditioning and testing) |
| ISO 1390-1-1977 |
工业用顺丁烯二酸酐.试验方法.第1部分:总则 |
(Maleic anhydride for industrial use; Methods of test; Part I : General) |
| ISO 1390-2-1977 |
工业用顺丁烯二酸酐.试验方法.第2部分:溶解物质颜色的测定 |
(Maleic anhydride for industrial use; Methods of test; Part II : Measurement of colour of the molten material) |
| ISO 1390-3-1977 |
工业用顺丁烯二酸酐.试验方法.第3部分:游离酸度的测定.电位滴定法 |
(Maleic anhydride for industrial use; Methods of test; Part III : Determination of free acidity; Potentiometric method) |
| ISO 1390-4-1977 |
工业用顺丁烯二酸酐.试验方法.第4部分:顺丁烯二酸酐含量的测定.滴定法 |
(Maleic anhydride for industrial use; Methods of test; Part IV : Determination of maleic anhydride content; Titrimetric method) |
| ISO 1390-5-1977 |
工业用顺丁烯二酸酐.试验方法.第5部分:灰分的测定 |
(Maleic anhydride for industrial use; Methods of test; Part V : Determination of ash) |
| ISO 1390-6-1977 |
工业用顺丁烯二酸酐.试验方法.第6部分:铁含量的测定.2,2`-联吡啉光度法 |
(Maleic anhydride for industrial use; Methods of test; Part VI : Determination of iron content; 2,2`- Bipyridyl photometric method) |
| ISO 13900-1997 |
钢.硼含量测定.蒸馏后姜黄素光谱测定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation) |
| ISO 13902-1997 |
钢和铁.高硫含量的测定.感应炉燃烧后的红外线吸收法 |
(Steel and iron - Determination of high sulfur content - Infrared absorption method after combustion in an induction furnace) |
| ISO 13909-1-2001 |
硬煤和焦炭.机械取样.第1部分:一般介绍 |
(Hard coal and coke - Mechanical sampling - Part 1: General introduction) |
| ISO 13909-2-2001 |
硬煤和焦炭.机械取样.第2部分:煤.流动取样 |
(Hard coal and coke - Mechanical sampling - Part 2: Coal; Sampling from moving streams) |
| ISO 13909-3-2001 |
硬煤和焦炭.机械取样.第2部分:煤.静止批中取样 |
(Hard coal and coke - Mechanical sampling - Part 3: Coal; Sampling from stationary lots) |
| ISO 13909-4-2001 |
硬煤和焦炭.机械取样.第4部分:煤.试验样品的制备 |
(Hard coal and coke - Mechanical sampling - Part 4: Coal; Preparation of test samples) |
| ISO 13909-5-2001 |
硬煤和焦炭.机械取样.第5部分:焦炭.流动取样 |
(Hard coal and coke - Mechanical sampling - Part 5: Coke; Sampling from moving streams) |
| ISO 13909-6-2001 |
硬煤和焦炭.机械取样.第6部分:焦炭.试验样品的制备 |
(Hard coal and coke - Mechanical sampling - Part 6: Coke; Preparation of test samples) |
| ISO 13909-7-2001 |
硬煤和焦炭.机械取样.第7部分:取样精度测定方法、样品制备方法及试验方法 |
(Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing) |
| ISO 13909-8-2001 |
硬煤和焦炭.机械取样.第8部分:偏差试验方法 |
(Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias) |
| ISO 1391-1-1976 |
工业用仲甲醛.试验方法.第1部分:总则 |
(Paraformaldehyde for industrial use; Methods of test; Part 1 : General) |
| ISO 1391-2-1976 |
工业用仲甲醛.试验方法.第2部分:灰分的测定 |
(Paraformaldehyde for industrial use; Methods of test; Part 2 : Determination of ash) |
| ISO 1391-3-1976 |
工业用仲甲醛.试验方法.第3部分:铁含量的测定.2,2`-联吡啶光度法 |
(Paraformaldehyde for industrial use; Methods of test; Part 3 : Determination of iron content; 2,2`- Bipyridyl photometric method) |
| ISO 1391-4-1976 |
工业用仲甲醛.试验方法.第4部分:水不溶物含量的测定 |
(Paraformaldehyde for industrial use; Methods of test; Part 4 : Determination of water-insoluble matter) |
| ISO 1391-5-1981 |
工业用多聚甲醛.试验方法.醛含量的测定.滴定法 |
(Paraformaldehyde for industrial use; methods of test; determination of aldehyde content; titrimetric method) |
| ISO 13916-1996 |
焊接.预热温度、层间温度和预加热的维持温度测量的导则 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature) |
| ISO 13918-1998 |
焊接.弧螺栓焊接用螺栓和水泥箍 |
(Welding - Studs and ceramic ferrules for arc stud welding) |
| ISO 13919-1-1996 |
焊接.电子和激光射线焊接接头.缺陷的质量级别导则.第1部分:钢 |
(Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel) |
| ISO 13919-2-2001 |
焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金 |
(Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys) |
| ISO 1392-1977 |
结晶点的测定.一般方法 |
(Determination of crystallizing point; General method) |
| ISO 13920-1996 |
焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position) |
| ISO 13921-1996 |
航空.内部偏颈十字形带螺纹或不带螺纹的、标准的、短的或中等长度MJ螺纹、金属材料涂覆或没有涂覆的、强度 |
(Aerospace - Screws, 100 reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| ISO 13924-2000 |
塑料管和配件.聚乙烯/金属过渡配件、聚乙烯攻丝三通管和聚乙烯支管管托的弯曲拉力循环试验 |
(Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles) |
| ISO 13926-1-1998 |
针头系列.第1部分:医用注射器针头用玻璃圆柱体 |
(Pen systems - Part 1: Glass cylinders for pen-injectors for medical use) |
| ISO 13926-1-2004 |
针头系列.第1部分:医用针头注射器用玻璃套筒 |
|
| ISO 13926-2-1999 |
针头系列.第2部分:医用注射器针头用圆盘和柱基 |
(Pen systems - Part 2: Plungers and discs for pen-injectors for medical use) |
| ISO 13927-2001 |
塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector) |
| ISO 13929-2001 |
小型船舶.操舵装置.一般链接系统 |
(Small craft - Steering gear - General link systems) |
| ISO 1393-1977 |
工业用液态卤代烃.酸度的测定.滴定法 |
(Liquid halogenated hydrocarbons for industrial use; Determination of acidity; Titrimetric method) |
| ISO 13930-1998 |
铁矿石.低温还原分解的动态试验 |
(Iron ores - Dynamic test for low-temperature reduction-disintegration) |
| ISO 13934-1-1999 |
纺织材料.织物拉伸特性.第1部分:用条形方法对最大作用力和在最大作用力下延伸的测定 |
(Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method) |
| ISO 13934-2-1999 |
纺织材料.织物拉伸特性.第2部分:用夹钳方法对最大作用力的测定 |
(Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method) |
| ISO 13935-1-1999 |
纺织材料.织物和成衣接缝拉伸特性.用剥离方法对接缝裂开最大拉力的测定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method) |
| ISO 13935-2-1999 |
纺织材料.织物和成衣接缝拉伸特性.用夹钳方法对接缝裂开最大拉力的测定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method) |
| ISO 13936-1-2004 |
纺织品.机织物中缝合处纱线的抗滑脱性测定.第1部分:固定缝开口法 |
|
| ISO 13936-2-2004 |
纺织品.机织物中缝合处纱线的抗滑脱性测定.第2部分:固定荷载法 |
|
| ISO 13937-1 Technical Corrigendum 1-2004 |
纺织品.织物撕破特性.第1部分:用冲击摆锤方法测定撕破强力(埃尔门多夫).技术勘误1 |
|
| ISO 13937-1-2000 |
纺织材料.织物撕裂特性.第1部分:用冲击摆方法测定撕裂力(埃尔门多夫) |
(Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)) |
| ISO 13937-2-2000 |
纺织材料.织物撕裂特性.第2部分:裤形试样撕裂力的测定(单撕裂法) |
(Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)) |
| ISO 13937-3-2000 |
纺织材料.织物撕裂特性.第3部分:翼形试样撕裂力的测定(单撕裂法) |
(Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)) |
| ISO 13937-4-2000 |
纺织材料.织物撕裂特性.第4部分:舌形试样撕裂力的测定(双撕裂法) |
(Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)) |
| ISO 13938-1-1999 |
织物.纤维破碎特性.第1部分:破碎强度和破碎膨胀测定的液压方法 |
(Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension) |
| ISO 13938-2-1999 |
织物.纤维破碎特性.第1部分:破碎强度和破碎膨胀测定的气压方法 |
(Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension) |
| ISO 1394-1977 |
工业用液态卤代烃.浊点的测定 |
(Liquid halogenated hydrocarbons for industrial use; Determination of cloud point) |
| ISO 13942-2000 |
粘合磨料.极限偏差和跳动公差 |
(Bonded abrasive products - Limit deviations and run-out tolerances) |
| ISO 13943-2000 |
防火安全.词汇 |
(Fire safety - Vocabulary) |
| ISO 13944-1996 |
润滑金属粉末混合物.润滑物含量测定.改良的索格利特(提取器)萃取法 |
(Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method) |
| ISO 13948-1-2000 |
柴油发动机.燃料喷射管和燃料喷射器低压连接.第1部分:螺纹连接 |
(Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections) |
| ISO 13948-2-2000 |
柴油发动机.燃料喷射管和燃料喷射器低压连接件.第2部分:无螺纹(推动)连接件 |
(Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections) |
| ISO 1395 AMD 1-1982 |
第1次修改 |
(Short pitch transmission precision bush chains and chain wheels; amendment 1) |
| ISO 1395-1977 |
短节距传动的精密套筒链和链轮 |
(Short pitch transmission precision bush chains and chain wheels) |
| ISO 13951-2001 |
塑料管道系统.聚烯烃管道及管道配件对拉伸负载耐性的试验方法 |
(Plastics piping systems - Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading) |
| ISO 13953-2001 |
聚乙烯管和配件.从对焊接头测定抗拉强度和试样的断裂形式 |
(Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint) |
| ISO 13954-1997 |
塑料管和配件.额定外径大于或等于90mm的聚乙烯(PE)电熔组件的剥离内散试验 |
(Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm) |
| ISO 13955-1997 |
塑料管和配件.聚乙烯(PE)电熔组件的压碎内散试验 |
(Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies) |
| ISO 13957-1997 |
塑料管和配件.聚乙烯(PE)敲击T.抗冲击试验方法 |
(Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance) |
| ISO 13958-2002 |
血液透析和相关治疗的浓缩物 |
(Concentrates for haemodialysis and related therapies) |
| ISO 13959-2002 |
血液透析用水和有关疗法 |
(Water for haemodialysis and related therapies) |
| ISO 13960-2003 |
心血管植入物与人造器官.血浆过滤器 |
(Cardiovascular implants and artificial organs - Plasmafilters ) |
| ISO 13960-2003 |
心血管植入物与人造器官.血浆过滤器 |
|
| ISO 13964-1998 |
空气质量.环境空气中臭氧含量测定.紫外线光度计法 |
(Air quality - Determination of ozone in ambient air - Ultraviolet photometric method) |
| ISO 13965-1998 |
肉和肉制品.淀粉和葡萄糖的测定.酶催化方法 |
(Meat and meat products - Determination of starch and glucose contents - Enzymatic method) |
| ISO 13966-1998 |
热塑管和配件.标准环硬挺度 |
(Thermoplastics pipes and fittings - Nominal ring stiffnesses) |
| ISO 13967-1998 |
热塑配件.环硬挺度的测定 |
(Thermoplastics fittings - Determination of ring stiffness) |
| ISO 13968-1997 |
塑料管道及导管系统.热塑性塑料管.环状物揉韧性的测定 |
(Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility) |
| ISO 13969-2003 |
乳及乳制品.微生物抑制剂试验的标准化描述指南 |
(Milk and milk products - Guidelines for a standardized description of microbial inhibitor tests) |
| ISO 13969-2003 |
乳及乳制品.微生物抑制剂试验的标准化描述指南 |
|
| ISO 13984-1999 |
液压.道路车辆燃油系统界面 |
(Liquid hydrogen - Land vehicle fuelling system interface) |
| ISO 13990-1996 |
纺织机械及附件.针织机用导纱器.词汇 |
(Textile machinery and accessories - Yarn feeders for knitting machines - Vocabulary) |
| ISO 13992 AMD 1-2004 |
高山滑雪板装配.安全要求和试验方法.修改件1 |
|
| ISO 13992-1997 |
高山滑雪板.装配.安全要求和试验方法 |
(Alpine touring ski-bindings - Safety requirements and test methods) |
| ISO 13993-2001 |
滑雪设备租赁商店实施规范.租赁设施中完整和不完整高山滑雪装配靴的取样和检验 |
(Rental ski shop practice - Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications) |
| ISO 13994-1998 |
对液体化合物的防护服装.防护服装材料在压力下防液体渗透的阻力测定 |
(Clothing for protection against liquid chemicals - Determination of the resistance of protective clothing materials to penetration by liquids under pressure) |
| ISO 13995-2000 |
防护服.机械特性.材料抗动力撕扯和穿刺性的试验方法 |
(Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials) |
| ISO 13996-1999 |
防护服.机械性能.刺穿阻力的测定 |
(Protective clothing - Mechanical properties - Determination of resistance to puncture) |
| ISO 13997-1999 |
防护服.机械特性.抗尖锐物切割特性的测定 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects) |
| ISO 13998-2003 |
防护服.防小折刀切割和刺穿的围裙、裤子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives) |
| ISO 13998-2003 |
防护服.防小折刀切割和刺穿的围裙、裤子和背心 |
|
| ISO 13999-1-1999 |
防护服装.防止刀切伤和割伤的手套和胳膊护套.第1部分:链邮递手套和胳膊护套 |
(Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain-mail gloves and arm guards) |
| ISO 13999-2-2003 |
防护服.防止刀割伤和刺伤用的手套和手臂护套.第3部分:不包括链环在内的材料制手套和手臂护套 |
(Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail) |
| ISO 13999-2-2003 |
防护服.防止刀割伤和刺伤用的手套和手臂护套.第3部分:不包括链环在内的材料制手套和手臂护套 |
|
| ISO 13999-3-2002 |
防护服.防止被手持刀具割伤和刺伤用的手套和手臂保护物.第3部分:编织物,皮革和其它编织材料的冲击切割试验 |
(Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials) |
| ISO 14-1982 |
内定心的直边花键轴.尺寸,公差和检验 |
(Straight-sided splines for cylindrical shafts with internal centering; Dimensions, tolerances and verification) |
| ISO 140-1 AMD 1-2004 |
声学.建筑物和建筑构件的隔声测量.第1部分:能抑制侧向传声的实验室试验装置的要求.修改件1: 轻型双叶隔板用开度测试框架的特殊要求 |
|
| ISO 140-1-1997 |
声学.建筑物和建筑构件的隔音测量.第1部分:抑制侧向传输的实验室试验装置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission) |
| ISO 140-10-1991 |
声学.建筑物和建筑构件的隔音测量.第10部分:小型建筑物构件空气隔音的实验室测量 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 10: laboratory measurement of airborne sound insulation of small building elements) |
| ISO 140-12-2000 |
声学.建筑物和建筑部件隔音测量.第12部分:通道地板的房间对房间气载和冲击声音隔绝的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor) |
| ISO 140-14-2004 |
声学.建筑物和建筑构件的隔声测量.第14部分:试验场中特殊情况指南 |
|
| ISO 140-2 Technical Corrigendum 1-1993 |
声学.建筑物和建筑构件的隔音测量.第2部分:精度数据的测定.检验和应用.技术勘误1-9 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data; technical corrigendum 1) |
| ISO 140-2-1991 |
声学.建筑物和建筑构件的隔音测量.第2部分:精确数据的确定.验证和应用 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data) |
| ISO 140-3 AMD 1-2004 |
声学.建筑物和建筑构件的隔声测量.第3部分:建筑构件空气声隔声的实验室测量.修改件1:轻型双叶隔板的安装指南 |
|
| ISO 140-3-1995 |
声学.建筑物和建筑构件的隔音测量.第3部分:建筑物构件的气载音响隔离的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements) |
| ISO 140-4-1998 |
声学.建筑物和建筑构件的隔音测量.第4部分:房间之间气载声音隔绝的场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms) |
| ISO 140-5-1998 |
声学.建筑物和建筑构件的隔音测量.第5部分:正面构件和正面的气载声音隔绝的现场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of fa嘺de elements and fa嘺des) |
| ISO 140-6-1998 |
声学.建筑物和建筑构件的隔音测量.第6部分:地板冲击声隔绝的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors) |
| ISO 140-7-1998 |
声学.建筑物和建筑构件的隔音测量.第7部分:地板冲击声隔绝的场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com