标准号 |
中文名称 |
英文名称 |
ISO 21670-2003 |
带法兰的六角焊接螺母 |
|
ISO 2168-1974 |
佐餐用葡萄.冷藏指南 |
Table grapes; Guide to cold storage |
ISO 2169-1981 |
水果和蔬菜.冷藏的物理环境.定义和测量 |
Fruits and vegetables; Physical conditions in cold stores; Definitions and measurement |
ISO 217-1995 |
纸.未经整理尺寸.原始的和追加范围的公差和命名,及机器修改范围 |
Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
ISO 2171-1993 |
谷类和碾碎谷类制品.灰分的测定 |
Cereals and milled cereal products; determination of total ash |
ISO 2172-1983 |
果汁.可溶性固态物质含量的测定.比重计法 |
Fruit juice; Determination of soluble solids content; Pycnometric method |
ISO 21727-2004 |
摄影.电影音频材料的感觉级音量的测量方法 |
|
ISO 2173-1978 |
水果和蔬菜制品.可溶性固态物质含量的测定.折射计法 |
Fruit and vegetable products; Determination of soluble solids content; Refractometric method |
ISO 2173-2003 |
水果和蔬菜制品.可溶性固形物含量的测定.折射法 |
(Fruit and vegetable products - Determination of soluble solids - Refractometric method ) |
ISO 2173-2003 |
水果和蔬菜制品.可溶性固形物含量的测定.折射法 |
|
ISO 2174-1990 |
表面活性剂.已知钙质硬度水的制备 |
Surface active agents; preparation of water with known calcium hardness |
ISO 2175-1981 |
非机动装置的工业用车轮.尺寸和公称负荷能力 |
Industrial wheels for non-powered equipment; Dimensions and nominal load capacities |
ISO 2176 Technical Corrigendum 1-2001 |
石油产品.润滑脂.滴点的测定.技术勘误1 |
Petroleum products - Lubricating grease - Determination of dropping point; Technical Corrigendum 1 |
ISO 2176-1995 |
石油产品.润滑脂.滴点的测定 |
Petroleum products - Lubricating grease - Determination of dropping point |
ISO 2177-2003 |
金属覆盖层.覆盖层厚度的测量.阳极溶解库仑法 |
(Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution) |
ISO 2177-2003 |
金属覆盖层.覆盖层厚度的测量.阳极溶解库仑法 |
|
ISO 2177-2003 |
金属覆盖层.覆盖层厚度的测量.阳极溶解库仑法 |
|
ISO 2178-1982 |
磁性基质的非磁性镀层.镀层厚度的测量.磁性法 |
Non-magnetic coatings on magnetic substrates; Measurement of coating thickness; Magnetic method |
ISO 2179-1986 |
锡镍合金的电镀层.规范和试验方法 |
Electroplated coatings of tin-nickel alloy; Specification and test methods |
ISO 21807-2004 |
食品和动物饲料的微生物学.水活动性的测定 |
|
ISO 2184-1-1972 |
工业用脚轮.盖板尺寸.第1部分:四螺孔矩形盖板 |
Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes |
ISO 2184-1972 |
工业用脚轮.顶板尺寸.第1部分:有4个螺栓孔的长形顶板 |
Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes |
ISO 2186-1973 |
封闭管道的流体流量.一级和二级组件间压力信号传递的连接 |
Fluid flow in closed conduits; Connections for pressure signal transmissions between primary and secondary elements |
ISO 2187-1990 |
纺纱准备机械.纺纱和并(捻)机械.等义术语表 |
Spinning preparatory machinery, spinning and doubling (twisting) machinery; list of equivalent terms |
ISO 2189-1986 |
纯粘结膨胀软木.容积密度的测定 |
Expanded pure agglomerated cork; Determination of bulk density |
ISO 21898-2004 |
包装.非危险货物用软的过渡性散货集装箱 |
|
ISO 21898-2004 |
包装.非危险货物用软的过渡性散货集装箱 |
|
ISO 2190-1998 |
粒状软木.含水量的测定 |
Granulated cork - Determination of moisture content |
ISO 2191-1972 |
软木.纯粘结膨胀软木.在恒压下的形变 |
Cork; Expanded pure agglomerated; Deformation under constant pressure |
ISO 2194-1991 |
工业用筛.丝纺织网布、多孔板和电铸薄板.筛孔的名称和额定尺寸 |
Industrial screens; woven wire cloth, perforated plate and electroformed sheet; designation and nominal sizes of openings |
ISO 21948-2001 |
覆层磨料.平板 |
Coated abrasives - Plain sheets |
ISO 21949-2001 |
覆层磨料.萃取尘埃用带孔平板 |
Coated abrasives - Plain sheets with holes for dust extraction |
ISO 2195-1972 |
卷轴式穿孔纸带的数据交换.一般要求 |
Data interchange on rolled-up punched paper tape; General requirements |
ISO 21950-2001 |
覆层磨料.普通圆盘 |
Coated abrasives - Plain discs |
ISO 21951-2001 |
覆层磨料.萃取尘埃用带孔普通圆盘 |
Coated abrasives - Plain discs with holes for dust extraction |
ISO 21961-2003 |
航天数据和信息传输系统.数据实体字典规范语言(DEDSL).抽象语句 |
(Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - Abstract syntax) |
ISO 21961-2003 |
航天数据和信息传输系统.数据实体字典规范语言(DEDSL).抽象语句 |
|
ISO 21962-2003 |
航天数据和信息传输系统.数据实体字典规范语言(DEDSL).PVL语法 |
(Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - PVL syntax) |
ISO 21962-2003 |
航天数据和信息传输系统.数据实体字典规范语言(DEDSL).PVL语法 |
|
ISO 2197-1972 |
工业用碳酸氢钠.试验方法一览和试样的制备 |
Sodium hydrogen carbonate for industrial use; List of methods of test and preparation of the test sample |
ISO 2198-1972 |
工业用碳酸氢钠.碳酸钠含量的测定.滴定法 |
Sodium hydrogen carbonate for industrial use; Determination of sodium carbonate; Titrimetric method |
ISO 2199-1972 |
工业用碳酸氢钠.碳酸氢钠含量的测定.滴定法 |
Sodium hydrogen carbonate for industrial use; Determination of sodium hydrogen carbonate content; Titrimetric method |
ISO 22-1991 |
皮带传动.平行传动用皮带和皮带轮.尺寸和公差 |
Belt drives; flat transmission belts and corresponding pulleys; dimensions and tolerances |
ISO 2200-1972 |
工业用碳酸氢钠.水含量的测定.重量法 |
Sodium hydrogen carbonate for industrial use; Determination of moisture content; Gravimetric method |
ISO 2201-1972 |
工业用碳酸氢钠.氯化物含量的测定.汞量法 |
Sodium hydrogen carbonate for industrial use; Determination of chloride content; Mercurimetric method |
ISO 2202 ADD 1-1975 |
第1次补充 |
Liquid chlorine for industrial use; determination of water content using an electrolytic analyser; addendum 1 |
ISO 2202-1972 |
工业用液态氯.用电解分析仪测定水含量 |
Liquid chlorine for industrial use; Determination of water content using an electrolytic analyser |
ISO 22028-1-2004 |
摄影和图形技术.数字图像存储、操作和转换用扩展的色码.第1部分:体系结构和要求 |
|
ISO 22029-2003 |
光谱数据交换用标准文档格式 |
|
ISO 2203-1973 |
技术制图.齿轮的习惯画法 |
Technical drawings; Conventional representation of gears |
ISO 22048-2004 |
表面化学分析.静态次生离子质谱法的信息格式 |
|
ISO 2205-1975 |
纺织机械和附件.纺机牵伸装置.术语.三种语言版 |
Textile machinery and accessories; Drafting arrangements for spinning machines; Terminology Trilingual edition |
ISO 2206-1987 |
包装.满装的运输包装.试验时包装件要素的标识 |
Packaging; Complete, filled transport packages; Identification of parts when testing |
ISO 2207-1980 |
石蜡.凝固点的测定 |
Petroleum waxes; Determination of congealing point |
ISO 2208-1973 |
工业用苯酚,邻甲酚,间甲酚和对甲酚.用分子筛干燥后结晶点测定 |
Phenol, o-cresol, m-cresol and p-cresol for industrial use; Determination of crystallizing point after drying with a molecular sieve |
ISO 2209-1973 |
工业用液态卤代烃.取样 |
Liquid halogenated hydrocarbons for industrial use; Sampling |
ISO 22090-1-2002 |
船舶和海上技术.传递航向装置(THDs).第1部分:航向陀罗仪 |
Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses |
ISO 22090-2-2004 |
船舶和海上技术.传递航向装置(THDs).第2部分:地磁原则 |
|
ISO 22090-3-2004 |
船舶和海上技术.传递航向装置(THDs).第3部分:GNSS原则 |
|
ISO 22093-2003 |
工业自动化系统和集成.物理设备控制.尺寸测量接口标准 |
(Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)) |
ISO 22093-2003 |
工业自动化系统和集成.物理设备控制.尺寸测量接口标准 |
|
ISO 2210-1972 |
工业用液态卤代烃.蒸发残渣的测定 |
Liquid halogenated hydrocarbons for industrial use; Determination of residue on evaporation |
ISO 2211-1973 |
液态化学制品.以哈森(Hazen)单位(铂-钴标度)的颜色测量 |
Liquid chemical products; Measurement of colour in Hazen units (platinum-cobalt scale) |
ISO 2212-1972 |
工业用三氯乙烯.试验方法 |
Trichloroethylene for industrial use; Methods of test |
ISO 2213-1972 |
工业用过氯乙烯.试验方法 |
Perchloroethylene for industrial use; Methods of test |
ISO 2214-1972 |
工业用硼酸,氧化硼和四硼酸二钠.锰含量的测定.甲醛肟光度法 |
Boric acid, boric oxide and Disodium tetraborates for industrial use; Determination of manganese content; Formaldehyde oxime photometric method |
ISO 2215-1972 |
工业用硼酸,氧化硼和四硼酸二钠.铜含量的测定.二苄基二硫代氨基甲酸锌光度法 |
Boric acid, boric oxide and Disodium tetraborates for industrial use; Determination of copper content; Zinc dibenzyldithiocarbamate photometric method |
ISO 22156-2004 |
竹子.结构设计 |
|
ISO 22157-1-2004 |
竹子.物理和机械性能的测定.第1部分:要求 |
|
ISO 2216-1972 |
工业用粗硼酸钠.氧化钠和氧化硼含量的测定.容量法 |
Crude sodium borates for industrial use; Determination of sodium oxide and boric oxide contents; Volumetric method |
ISO 2217-1975 |
工业用粗硼酸钠.碱性溶剂不溶物的测定和试验溶液的配制 |
Crude sodium borates for industrial use; Determination of matter insoluble in alkaline medium and preparation of test solutions |
ISO 2218-1972 |
工业用粗硼酸钠.900℃加热后质量损失的测定 |
Crude sodium borates for industrial use; Determination of loss in mass after heating at 900 degrees C |
ISO 22188-2004 |
放射性物质的无意中移动和违禁运输的监控 |
|
ISO 2219-1989 |
热绝缘用的纯膨胀胶凝软木.特性、取样和包装 |
Expanded pure agglomerated cork for thermal insulation; characteristics, sampling and packaging |
ISO 2221-1972 |
工业用甲醛溶液.无机氯化物极限试验 |
Formaldehyde solutions for industrial use; Limit test for inorganic chlorides |
ISO 2222-1972 |
工业用甲醛溶液.无机硫酸盐极限试验 |
Formaldehyde solutions for industrial use; Limit test for inorganic sulphates |
ISO 2223-1972 |
工业用甲醛溶液.重金属(铁除外)极限试验 |
Formaldehyde solutions for industrial use; Limit test for heavy metals (excluding iron) |
ISO 2224-1972 |
工业用甲醛溶液.灰分的测定 |
Formaldehyde solutions for industrial use; Determination of ash |
ISO 2225-1972 |
工业用甲醛溶液.酸度的测定 |
Formaldehyde solutions for industrial use; Determination of acidity |
ISO 2226-1972 |
工业用甲醛溶液.铁含量的测定.2,2`-联吡啶光度法 |
Formaldehyde solutions for industrial use; Determination of iron content; 2,2`- Bipyridyl photometric method |
ISO 2226-1972 |
工业用甲醛溶液.铁含量的测定.2,2`-联吡啶光度法 |
Formaldehyde solutions for industrial use; Determination of iron content; 2,2`- Bipyridyl photometric method |
ISO 2227-1972 |
工业用甲醛溶液.甲醛含量的测定 |
Formaldehyde solutions for industrial use; Determination of formaldehyde content |
ISO 2228-1972 |
工业用甲醛溶液.甲醇含量的测定 |
Formaldehyde solutions for industrial use; Determination of methanol content |
ISO 2230-2002 |
橡胶产品.贮存导则 |
Rubber products - Guidelines for storage |
ISO 2231-1989 |
橡胶或塑料涂覆织物.试件环境调节标准大气 |
Rubber- or plastics-coated fabrics; standard atmospheres for conditioning and testing |
ISO 2232-1990 |
通用非合金钢钢丝绳的冷拉钢丝.规范 |
Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes; specifications |
ISO 2233-2000 |
包装.完全满运输包装和单位负载.试验条件 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing |
ISO 2234-2000 |
包装.满装的运输包装和单货物.静载荷法堆积试验 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
ISO 2236-1991 |
螺钉和螺母装配工具.锻制的和管状套筒板手.最大外围尺寸 |
Assembly tools for srews and nuts; forged and tubular socket wrenches; maximum outside head dimensions |
ISO 22368-1-2004 |
作物保护设备.清洁系统评价的试验方法.第1部分:全套喷雾装置的内部清洁 |
|
ISO 22368-2-2004 |
作物保护设备.清洁系统评价的试验方法.第2部分:喷雾装置的外部清洁 |
|
ISO 22368-3-2004 |
作物保护设备.清洁系统评价的试验方法.第3部分:容器的内部清洁 |
|
ISO 2238-1972 |
机用铆钉孔铰刀 |
Machine bridge reamers |
ISO 2240-1994 |
摄影技术.照相彩色反转片.ISO感光度的测定 |
Photography - Colour reversal camera films - Determination of ISO speed |
ISO 2240-2003 |
摄影.照相彩色反转片.ISO感光速度的测定 |
(Photography - Colour reversal camera films - Determination of ISO speed) |
ISO 2240-2003 |
摄影.照相彩色反转片.ISO感光速度的测定 |
|
ISO 22414-2004 |
纸.基本尺寸办公用纸.边质量的测量 |
|
ISO 2244-2000 |
包装.满装的运输包装和单货物.水平冲击试验 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests |
ISO 2245-1990 |
成型的绝热耐火材料制品.分类 |
Shaped insulating refractory products; classification |
ISO 2247-2000 |
包装.满装的运输包装和单货物.固定低频率振动试验 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency |
ISO 2248-1985 |
包装.满装的运输包装.坠落垂直上冲击试验 |
Packaging; Complete, filled transport packages; Vertical impact test by dropping |
ISO 225-1983 |
紧固件.螺栓、螺钉、双头螺柱和螺母.符号和尺寸名称.三种语言版本 |
Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition |
ISO 2250-1972 |
莫氏锥度和米制锥度精加工用的莫氏锥柄和直柄铰刀 |
Finishing reamers for Morse and metric tapers, with parallel shanks and Morse taper shanks |
ISO 2251-1991 |
加衬里的防静电橡胶靴规范 |
Lined antistatic rubber footwear; specification |
ISO 2252-1983 |
用于低温下的有衬里的抗静电橡胶套鞋 |
Rubber footwear, lined industrial, for use at low temperatures |
ISO 2253-1999 |
咖喱粉.规范 |
Curry powder - Specification |
ISO 2254-1980 |
丁香和丁香粉.规范 |
Cloves, whole and ground (powdered); Specification |
ISO 2254-2004 |
丁香和丁香粉.规范 |
|
ISO 2255-1996 |
芫荽或芫荽粉.规范 |
Coriander (Coriandrum sativum L.), whole or ground (powdered) - Specification |
ISO 2256-1984 |
干薄荷(mentha spicata Linnaeus syn.Mentha viriais Linnaeus)规范 |
Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus); Specification |
ISO 2257-1980 |
用于信息处理的办公用计算机和打印机.卷筒的纤维打印色带宽度 |
Office machines and printing machines used for information processing; Widths of fabric printing ribbons on spools |
ISO 2258-1976 |
打印色带.包装盒上的最小标记 |
Printing ribbons; Minimum markings to appear on containers |
ISO 226-1987 |
声学.标准同响度级等值线 |
Acoustics; Normal equal-loudness level contours |
ISO 226-2003 |
声学.标准等响曲线 |
(Acoustics - Normal equal-loudness-level contours) |
ISO 226-2003 |
声学.标准等响曲线 |
|
ISO 22608-2004 |
防护服.液体化学剂的防护.防护服材料对液体农药制剂的排斥、抑制和渗透性测量 |
|
ISO 22609-2004 |
传染试剂防护服.医疗面罩.防人造血渗透的试验方法(固定容积,水平喷射) |
|
ISO 2261-1994 |
往复式内燃机.手控装置.标准的运动方向 |
Reciprocating internal combustion engines - Hand-operated control devices - Standard direction of motion |
ISO 2262-1984 |
与钢丝绳同时使用的一般用途的嵌环.规范 |
General purpose thimbles for use with steel wire ropes; Specification |
ISO 22628-2002 |
道路车辆.可循环和可恢复性.计算方法 |
Road vehicles - Recyclability and recoverability - Calculation method |