标准号 |
中文名称 |
英文名称 |
ISO 5167-2-2003 |
用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates |
ISO 5167-2-2003 |
用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 |
|
ISO 5167-3-2003 |
用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles |
ISO 5167-3-2003 |
用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 |
|
ISO 5167-4-2003 |
用插入圆截面管道中的压差装置测量流体流量.第4部分:文杜利管 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes |
ISO 5167-4-2003 |
用插入圆截面管道中的压差装置测量流体流量.第4部分:文杜利管 |
|
ISO 5169-1977 |
机床.润滑指导的标识 |
Machine tools; Presentation of lubrication instructions |
ISO 517-1996 |
摄影.摄影镜头的光圈和相关特性.名称和符号及测量 |
Photography - Apertures and related properties pertaining to photographic lenses - Designations and measurements |
ISO 5170-1977 |
机床.润滑系统 |
Machine tools; Lubrication systems |
ISO 5171-1995 |
焊接、切割和有关工艺的压力表 |
Pressure gauges used in welding, cutting and allied processes |
ISO 5172-1995 |
焊接、切割和加热用手工焊枪规范和试验 |
Manual blowpipes for welding, cutting and heating - Specifications and tests |
ISO 5173-2000 |
金属材料焊接的破坏试验.弯曲试验 |
Destructive tests on welds in metallic materials - Bend tests |
ISO 5175-1987 |
气焊、切割和同类工艺设备.燃气和氧气或压缩空气的安全装置设备.一般规范,要求和试验 |
Equipment used in gas welding, cutting and allied processes; Safety devices for fuel gases and oxygen or compressed air; General specifications, requirements and tests |
ISO 5176-1-1991 |
用压差装置测量流体流量.第1部分:圆截面管道中插入的节流孔板、喷嘴和文杜利管 |
Measurement of fluid flow by means of pressure differential devices; part 1: orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full |
ISO 5178-2001 |
金属材料焊接的无损检验.熔焊接头焊接金属的纵向抗拉试验 |
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
ISO 5179-1983 |
用不同间距的焊缝的试块研究钎焊性 |
Investigation of brazeability using a varying gap test piece |
ISO 518-1977 |
摄影.照相闪光灯和电子照相闪光装置用的有电触头和无电触头的照相机附件极靴 |
Photography; Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units |
ISO 5182-1991 |
焊接.电阻焊条和辅助设备材料 |
Welding; materials for resistance welding electrodes and ancillary equipment |
ISO 5183-1-1998 |
电阻焊接设备.外锥度1:10电极接头.第10部分:锥度1:10圆锥形接头 |
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 |
ISO 5183-2-2000 |
电阻点焊.外锥度1:10电极接头.第2部分:端推力电极用平行柄接头 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes |
ISO 5184-1979 |
直的电阻点焊电极 |
Straight resistance spot welding electrodes |
ISO 5186-1995 |
气焊机.燃气/氧气用带圆柱形燃气管的机械切割烧嘴.结构.试验方法的一般要求 |
Oxygen/fuel gas blowpipes (cutting machine type) with cylindrical barrels - General specifications and test methods |
ISO 5187-1985 |
焊接和有关工艺.用软钎料和硬钎料制成的装置.机械试验方法 |
Welding and allied processes; Assemblies made with soft solders and brazing filler metals; Mechanical test methods |
ISO 5187-1985 |
焊接和有关工艺.用软钎料和硬钎料制成的装置.机械试验方法 |
Welding and allied processes; Assemblies made with soft solders and brazing filler metals; Mechanical test methods |
ISO 519-1992 |
摄影技术.便携式摄影机.闪光灯连接件尺寸 |
Photography; hand-held cameras; flash-connector dimensions |
ISO 5193-1981 |
锻铝和铝合金.拉制圆型材.形状和尺寸(直径的正负公差)公差 |
Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) |
ISO 5194-1981 |
铝和铝合金.锌含量的测定.火焰原子吸收光谱测定法 |
Aluminium and aluminium alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
ISO 5196-1-1980 |
镁合金.钍的测定.第1部分:重量分析法 |
Magnesium alloys; Determination of thorium; Part 1 : Gravimetric method |
ISO 5196-2-1980 |
镁合金.钍的测定.第2部分:滴定法 |
Magnesium alloys; Determination of thorium; Part 2 : Titrimetric method |
ISO 5198-1987 |
离心式混合轴流泵.液压性能试验规程.精密度 |
Centrifugal, mixed flow and axial pumps; Code for hydraulic performance tests; Precision grade |
ISO 5199-2002 |
离心泵的技术规范.2类 |
Technical specifications for centrifugal pumps - Class II |
ISO 520-1977 |
谷类和豆类.千粒质量的测定 |
Cereals and pulses; Determination of the mass of 1 000 grains |
ISO 5208-1993 |
工业阀门.阀门的压力试验 |
Industrial valves; pressure testing of valves |
ISO 5209-1977 |
通用工业阀门.作标记 |
General purpose industrial valves; Marking |
ISO 521-1975 |
直柄或莫氏锥柄机床装卡铰刀 |
Machine chucking reamers with parallel shanks or Morse taper shanks |
ISO 5210-1991 |
工业阀门.多圈旋转阀门驱动器附件 |
Industrial valves; multi-turn valve actuator attachments |
ISO 5211-2001 |
工业阀门.部分回转阀门致动器附件 |
Industrial valves - Part-turn actuator attachment |
ISO 5218-1977 |
信息交换.人类性别的表示法 |
Information interchange; Representation of human sexes |
ISO 5219-1984 |
空气配给和空气扩散.气路终端设备的实验室气动试验和测定 |
Air distribution and air diffusion; Laboratory aerodynamic testing and rating of air terminal devices |
ISO 522-1975 |
铰刀专用公差 |
Special tolerances for reamers |
ISO 5220 ADD 1-1984 |
第1次补充 |
Air distribution and air diffusion; aerodynamic testing and rating of constant and variable dual or single duct boxes and single duct units; addendum 1 |
ISO 5220-1981 |
空气配给和空气扩散.恒流和变流的双导管箱或单导管箱及单导管装置的气动试验和测定 |
Air distribution and air diffusion; Aerodynamic testing and rating of constant and variable dual or single duct boxes and single duct units |
ISO 5221-1984 |
空气配给和空气扩散.输气导管中气流速度测量法规则 |
Air distribution and air diffusion; Rules to methods of measuring air flow rate in an air handling duct |
ISO 5223 AMD 1-1999 |
谷类试验筛.修改件1:附加规格 |
Test sieves for cereals; Amendment 1: Additional sizes |
ISO 5223-1995 |
谷类试验筛 |
Test sieves for cereals |
ISO 5225-1983 |
旋转钻井设备.等义术语表.三种语言版 |
Rotary drilling equipment; list of equivalent terms trilingual edition |
ISO 5226-1985 |
石油和天然气工业用材料和设备.油井或天然气井用铝合金钻管 |
Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells |
ISO 5229-1982 |
旋转钻井设备.转台 |
Rotary drilling equipment; Rotary tables |
ISO 5232-1998 |
纺织机械的图形符号 |
Graphical symbols for textile machinery |
ISO 5233-1978 |
纺织机械和附件.牵伸系统的底沟槽滚柱 |
Textile machinery and accessories; Bottom fluted rollers for drafting systems |
ISO 5234-1980 |
纺织机械和附件.梳棉机金属针布.术语和定义.三种语言版 |
Textile machinery and accessories; Metallic card clothing; Terms and definitions Trilingual edition |
ISO 5238-1-1982 |
纺织机械和附件.纱线和中间产品筒子.第1部分:名词术语.三种语言版 |
Textile machinery and accessories; Packages of yarns and intermediate products; Part 1 : Terminology Trilingual edition |
ISO 5238-2-1983 |
纺织机械和附件.纺线和中间产品用筒子.第2部分:络筒的形状.三种语言版 |
Textile machinery and accessories; Packages of yarns and intermediate products; Part 2 : Forms of winding Trilingual edition |
ISO 5239-1980 |
纺织机械和附件.卷筒.基本术语.三种语言版 |
Textile machinery and accessories; Winding; Basic terms Trilingual edition |
ISO 5240-1994 |
纺织机械和辅助装置.经纱筒子架的主要尺寸 |
Textile machinery and accessories - Warp creels - Main dimensions |
ISO 5243-1977 |
纺织机械和附件.织机综框的标准号 |
Textile machinery and accessories; Numbering of heald frames in a loom |
ISO 5243-2004 |
纺织机械与附件.织机综框和线锭的标准号 |
|
ISO 5243-2004 |
纺织机械与附件.织机综框和线锭的标准号 |
|
ISO 5247-1-2004 |
纺织机械与附件.织机.第1部分:词汇和分类 |
|
ISO 5247-1-2004 |
纺织机械与附件.织机.第1部分:词汇和分类 |
|
ISO 5247-1983 |
纺织机械和附件.织机.分类和词汇.三种语言版 |
Textile machinery and accessories; Weaving machines; Classification and Vocabulary Trilingual edition |
ISO 5247-1983 |
纺织机械和附件.织机.分类和词汇.三种语言版 |
Textile machinery and accessories; Weaving machines; Classification and Vocabulary Trilingual edition |
ISO 5247-2-1989 |
纺织机械和附件.织机.第2部分:附件.词汇 |
Textile machinery and accessories; weaving machines; part 2: accessories; vocabulary |
ISO 5247-3-1993 |
纺织机械和附件.织机.第3部分:机器件.词汇 |
Textile machinery and accessories; weaving machines; part 3: parts of the machine; vocabulary |
ISO 5248-1982 |
纺织机械和附件.染整机械.辅助装置词汇.三种语言版 |
Textile machinery and accessories; Dyeing and finishing machinery; Vocabulary for ancillary devices Trilingual edition |
ISO 5248-1982 |
纺织机械和附件.染整机械.辅助装置词汇.三种语言版 |
Textile machinery and accessories; Dyeing and finishing machinery; Vocabulary for ancillary devices Trilingual edition |
ISO 5248-2003 |
纺织机械和附件.染整机械.辅助装置词汇 |
(Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary for ancillary devices) |
ISO 5248-2003 |
纺织机械和附件.染整机械.辅助装置词汇 |
|
ISO 5249-1988 |
纺织机械和附属设备.染色和精整机械的导辊.主要尺寸 |
Textile machinery and accessories; guide rollers for dyeing and finishing machinery; main dimensions |
ISO 525-1999 |
粘合磨料制品.一般要求 |
Bonded abrasive products - General requirements |
ISO 5250-1982 |
纺织机械和附件.染整机械.拉幅机词汇.三种语言版 |
Textile machinery and accessories; Dyeing and finishing machinery; Vocabulary for stenters Trilingual edition |
ISO 5250-2003 |
纺织机械与附件.染整机械.拉幅机和热处理机械术语 |
(Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery) |
ISO 5250-2003 |
纺织机械与附件.染整机械.拉幅机和热处理机械术语 |
|
ISO 5251-1981 |
不锈钢对焊配件 |
Stainless steel butt-welding fittings |
ISO 5252-1991 |
钢管.公差制度 |
Steel tubes; tolerance systems |
ISO 5256-1985 |
埋设或水下管路用钢管和配件.管内外涂沥青或沥青油衍生物 |
Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials |
ISO 5261-1995 |
技术制图.金属棒的简单表示和外形剖面 |
Technical drawings - Simplified representation of bars and profile sections |
ISO 5263-1-2004 |
纸浆.实验室湿解离.第1部分:化学纸浆的解离 |
|
ISO 5263-1995 |
纸浆.实验室湿法分解 |
Pulps - Laboratory wet disintegration |
ISO 5263-2-2004 |
纸浆.实验室湿解离.第2部分:20 鳦时机械纸浆的解离 |
|
ISO 5263-3-2004 |
纸浆.实验室湿解离.第3部分:85 鳦时机械纸浆的解离 |
|
ISO 5264-1-1979 |
纸浆.实验室打浆.第1部分:瓦利(VALLEY)打浆法 |
Pulps; Laboratory beating; Part 1 : Valley beater method |
ISO 5264-2-2002 |
纸浆.实验室打浆.第2部分:PFI 碾磨法 |
Pulps - Laboratory beating - Part 2: PFI mill method |
ISO 5267-1 Technical Corrigendum 1-2001 |
纸浆.排水能力的测定.第1部分:朔 -里格勒法(SCHO-PPER-RIEGLER).技术勘误1 |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method; Technical Corrigendum 1 |
ISO 5267-1-1999 |
纸浆.排水能力的测定.第1部分:朔 -里格勒法(SCHO-PPER-RIEGLER) |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method |
ISO 5267-2-2001 |
纸浆.排水能力的测定.第2部分:加拿大标准排水度法 |
Pulps - Determination of drainability - Part 2: Canadian Standard freeness method |
ISO 5269-1-1998 |
纸浆.实验室物理试验用纸板制备.第1部分:常规纸制造法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method |
ISO 5269-2-1998 |
纸浆.实验室物理试验用纸板的制备.第2部分:快速Kothen法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K攖hen method |
ISO 5269-2-2004 |
纸浆.物理试验用实验室浆张的制备.第2部分:快速凯塞(Korhen)法 |
|
ISO 5269-2-2004 |
纸浆.物理试验用实验室浆张的制备.第2部分:快速凯塞(Korhen)法 |
|
ISO 527-1 Technical Corrigendum 1-1994 |
塑料.抗拉特性的测定.第1部分:一般规则.技术修改1 |
Plastics; determination of tensile properties; part 1: general principles; technical corrigendum 1 |
ISO 527-1-1993 |
塑料.拉伸性能测定.第1部分:总则 |
Plastics; determination of tensile properties; part 1: general principles |
ISO 527-2-1993 |
塑料.拉伸性能测定.第2部分:模压和挤压塑料试验条件 |
Plastics; determination of tensile properties; part 2: test conditions for moulding and extrusion plastics |
ISO 527-3 Technical Corrigendum 1-1998 |
塑料.抗拉性能的测定.第3部分:薄膜和薄板材的试验条件.技术勘误1 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets; Technical Corrigendum 1 |
ISO 527-3 Technical Corrigendum 2-2001 |
塑料.拉伸特性的测定.第3部分:膜和片的试验条件.技术勘误2 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets; Technical Corrigendum 2 |
ISO 527-3-1995 |
塑料.抗拉性能的测定.第3部分:薄膜和薄板材的试验条件 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets |
ISO 527-4-1997 |
塑料.抗拉性能的测定.第4部分:正交同性和正交异性纤维的试验条件.增强塑料复合材料 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
ISO 527-5-1997 |
塑料.抗拉性能的测定.第5部分:单向纤维的试验条件.增强塑料复合材料 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
ISO 5270-1998 |
纸浆.实验室纸张.物理性能的测定 |
Pulps - Laboratory sheets - Determination of physical properties |
ISO 5272-1979 |
工业用甲苯.规范 |
Toluene for industrial use; Specifications |
ISO 5274-1979 |
芳香烃.酸洗试验 |
Aromatic hydrocarbons; Acid-wash test |
ISO 5275-1979 |
芳香烃.含硫醇(硫羟)试验.博士法试验(定硫醇) |
Aromatic hydrocarbons; Test for presence of mercaptans (thiols); Doctor test |
ISO 5275-2003 |
石油产品和烃类溶剂.硫醇类和其他硫类的测定.(博士法试验-定硫醇) |
(Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test) |
ISO 5275-2003 |
石油产品和烃类溶剂.硫醇类和其他硫类的测定.(博士法试验-定硫醇) |
|
ISO 5276-1979 |
芳香烃.中和试验 |
Aromatic hydrocarbons; Test for neutrality |
ISO 5277-1981 |
芳香烃.沸点在150℃以下的产品蒸发残渣的测定 |
Aromatic hydrocarbons; Determination of residue on evaporation of products having boiling points up to 150 degrees C |
ISO 528-1983 |
耐火材料制品.测温锥当量(耐火度)的测定 |
Refractory products; Determination of pyrometric cone equivalent (refractoriness) |
ISO 5280-1979 |
工业用二甲苯.规范 |
Xylene for industrial use; Specification |
ISO 5281-1980 |
芳香烃.苯,二甲苯和甲苯.在20℃时密度的测定 |
Aromatic hydrocarbons; Benzene, xylene and toluene; Determination of density at 20 degrees C |
ISO 5282-1982 |
芳香烃.硫含量的测定.皮特-鲁普雷克特(Pitt-Ruprecht)还原和分光光 度法 |
Aromatic hydrocarbons; Determination of sulphur content; Pitt-Ruprecht reduction and spectrophotometric method |
ISO 5284-1986 |
输送带.等义术语表.三种语言版 |
Conveyor belts; List of equivalent terms Trilingual edition |
ISO 5285-1978 |
输送带.储存和搬运指南 |
Conveyor belts; Guide to storage and handling |
ISO 5285-2004 |
输送带.储存和搬运指南 |
|
ISO 5287-1985 |
汽车工业用窄型三角皮带传动装置.疲劳试验 |
Narrow V-belt drives for the automotive industry; Fatigue test |
ISO 5287-2003 |
皮带传动.汽车工业用窄V带.疲劳试验 |
(Belt drives - Narrow V-belts drives for the automotive industry - Fatigue test) |
ISO 5287-2003 |
皮带传动.汽车工业用窄V带.疲劳试验 |
|
ISO 5288-2001 |
同步皮带驱动.词汇 |
Synchronous belt drives - Vocabulary |
ISO 5289-1992 |
农业机械.环形六角断面皮带及其相应皮带轮槽断面 |
Agricultural machinery; endless hexagonal belts and groove sections of corresponding pulleys |
ISO 529-1993 |
机用短丝锥和手用丝锥 |
Short machine taps and hand taps |
ISO 5290-2001 |
皮带传动.带接头的窄V型带的槽形皮带轮.9N/J,15N/J,20N/J和25N/J槽形截面(有效体系) |
Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system) |