标准号 |
中文名称 |
英文名称 |
ISO 1014-1985 |
焦炭.真相对密度、表观相对密度和孔隙率的测定 |
(Coke; Determination of true relative density, apparent relative density and porosity) |
ISO 10142-1996 |
铝制品中用的含碳材料.煅烧的焦炭.用实验室振动式磨矿机测定粒度稳定性 |
(Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill) |
ISO 10143-1995 |
铝生产用含碳材料.电极用煅烧过的焦炭.小颗粒电阻率的测定 |
(Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules) |
ISO 10144-1991 |
混凝土结构增强用钢棒材和线材的认证方案 |
(Certification scheme for steel bars and wires for the reinforcement of concrete structures) |
ISO 10145-1-1993 |
有铜焊螺旋硬质合金刀头的端面铣刀.第1部分:直柄端面铣刀尺寸 |
(End mills with brazed helical hardmetal tips; part 1: dimensions of end mills with parallel shank) |
ISO 10145-2-1993 |
有铜焊螺旋硬质合金刀头的端面铣刀.第2部分:7/24英寸锥柄端面铣刀的尺寸 |
(End mills with brazed helical hardmetal tips; part 2: dimensions of end mills with 7/24 taper shank) |
ISO 10146-1997 |
交联聚乙烯(PE-X)管.时间和温度对预期强度的影响 |
(Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength) |
ISO 10147-1994 |
交联聚乙烯制管和管配件.使用凝胶含量测定法对交联度的评定 |
(Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content) |
ISO 10147-2004 |
交联聚乙烯(PE-X)管材和管件.通过测定凝胶含量估算交联度 |
|
ISO 10147-2004 |
交联聚乙烯(PE-X)管材和管件.通过测定凝胶含量估算交联度 |
|
ISO 10153-1997 |
钢.硼含量的测定.姜黄素分光光度法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method) |
ISO 10154-1991 |
薄金属容器.三件向内卷曲颈气溶剂罐.顶端尺寸 |
(Light gauge metal containers; three-piece necked-in tinplate aerosol cans; dimensions of the top end) |
ISO 10155 Technical Corrigendum 1-2002 |
固定源辐射.自动监测粒子的质量浓度.性能特性、实验方法和规范、技术勘误1 |
(Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications; Technical Corrigendum 1) |
ISO 10155-1995 |
固定辐射源.颗粒的质量浓度的自动监控.功能特性、试验方法和规范 |
(Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications) |
ISO 10156-1996 |
气体和气体混合物.气瓶阀口选择用潜在燃烧性和氧化能力的测定 |
(Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets) |
ISO 10157-1991 |
摄影技术.闪光灯曝光表.要求 |
(Photography; flash exposure meter; requirements) |
ISO 10160 AMD 1-2002 |
信息和文献.开放系统互联.馆际互借应用服务定义.修改1:附录中加D表示承认加拿大国家图书馆为维护机构 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition; Amendment 1: Addition of annex D acknowledging the National Library of Canada as the Maintenance Agency) |
ISO 10160-1997 |
情报和文献.开放系统互连.馆际互借应用服务定义 |
(Information and documentation - Open Systems Interconnection - Interlibrary loan application service definition) |
ISO 10161-1 AMD 1-2002 |
信息和文献.开放系统互联.馆际互借应用协议规范.第1部分:协议规范.修改1:扩充数据的“识别符“参数中目标识 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol specification; Amendment 1: Support for Use of Object Identifier in “identifier“ Parameter of the Extension Data) |
ISO 10161-1 AMD 2-2002 |
信息和文献工作.开放系统互连.馆际互借应用协议规范.第1部分:协议规范.修改件2:附录中加I表示承认加拿大国 |
(Information and documentation - Open Systems Interconnection - Interlibrary loan application protocol specification - Part 1: Protocol specification; Amendment 2: Addition of annex I acknowledging the National Library of Canada as the Maintenance Agency |
ISO 10161-1-1997 |
信息和文献.开放系统互连,馆际借用协议规范.第1部分:协议规范 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol specification) |
ISO 10161-2-1997 |
信息和文献.开放系统互连.馆际借用协议规范.第2部分:协议履行一致性声明(PICS)形式 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 2: Protocol Implementation Conformance Statement (PICS) proforma) |
ISO 10162-1993 |
情报和文献.开放系统互连.检索和觅数应用服务定义 |
(Information and documentation; Open Systems Interconnection; search and retrieve application service definition) |
ISO 10163-1-1993 |
情报和文献.开放系统互连.检索应用协议规范.第1部分:协议规范 |
(Information and documentation; Open Systems Interconnection; Search and retrieve application protocol specification; Part 1: Protocol specification) |
ISO 1017-1985 |
褐煤.可溶甲苯萃取物中丙酮可溶物(“树脂状物质“)的测定 |
(Brown coals and lignites; Determination of acetone-soluble material (“resinous substances“) in the toluene-soluble extract) |
ISO 1018-1975 |
硬煤.含水能力的测定 |
(Hard coal; Determination of moisture-holding capacity) |
ISO 10185-1993 |
烟草和烟草制品.词汇 |
(Tobacco and tobacco products; vocabulary) |
ISO 10185-2004 |
烟草和烟草制品.词汇 |
|
ISO 1019-1982 |
电影技术.16mm电影摄影机白天装片用防光片盒.尺寸 |
(Cinematography; Spools, daylight loading type for 16 mm motion-picture cameras; Dimensions) |
ISO 10190-1992 |
摩托车链条.特性和试验方法 |
(Motor cycle chains; characteristics and test methods) |
ISO 10191 AMD 1-1998 |
客车轮胎.校验轮胎性能.实验室试验法.修改件1 |
(Passenger car tyres - Verifying tyre capabilities - Laboratory test methods; Amendment 1) |
ISO 10191-1995 |
客车轮胎.校验轮胎性能.实验室试验法 |
(Passenger car tyres - Verifying tyre capabilities - Laboratory test methods) |
ISO 10193-2000 |
通用轻型金属量器.低于4000ml的圆柱形和锥形容器的标称装填量 |
(General use light gauge metal containers - Nominal filling volumes of round cylindrical and tapered containers of up to 40000 ml) |
ISO 10196-2003 |
文献成像应用.原始文献创作推荐规程 |
(Document imaging applications - Recommendations for the creation of original documents) |
ISO 10196-2003 |
文献成像应用.原始文献创作推荐规程 |
|
ISO 10197-1993 |
显微照相.透明缩微品用阅读印相机的特性 |
(Micrographics -- Reader-printers for transparent microforms -- Characteristics) |
ISO 10198-1994 |
缩微摄影技术.用16 mm 缩微胶片的旋转式照相机的机械性能和光学性能 |
(Micrographics; rotary camera for 16 mm microfilm; mechanical and optical characteristics) |
ISO 102-1990 |
飞机.重力加油口 |
(Aircraft; gravity filling orifices) |
ISO 1020-1974 |
电影技术.双8mm电影摄影机白天装片用防光片盒.尺寸 |
(Cinematography; Spools, daylight loading type for double-8 mm motion-picture cameras; Dimensions) |
ISO 10202-1 Technical Corrigendum 1-1999 |
财务交易卡.集成电路卡财务交易系统的证券结构.第1部分:卡片寿命周期.技术勘误1 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 1: Card life cycle; Technical Corrigendum 1) |
ISO 10202-1-1991 |
财务交易卡.集成电路卡财务交易系统的证券结构.第1部分:卡片寿命周期 |
(Financial transaction cards; security architecture of financial transaction systems using integrated circuit cards; part 1: card life cycle) |
ISO 10202-2-1996 |
财务交易卡.集成电路卡财务交易系统的证券结构.第2部分:财务交易程序 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 2: Transaction process) |
ISO 10202-3-1998 |
金融交易卡.采用集成电路卡的金融交易系统的安全结构.第3部分:加密密钥关系 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 3: Cryptographic key relationships) |
ISO 10202-4 Technical Corrigendum 1-1999 |
财务交易卡.集成电路卡财务交易系统的证券结构.第4部分:安全应用模块.技术勘误1 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 4: Secure application modules; Technical Corrigendum 1) |
ISO 10202-4-1996 |
财务交易卡.集成电路卡财务交易系统的证券结构.第4部分:安全应用模块 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 4: Secure application modules) |
ISO 10202-5-1998 |
财务交易卡.集成电路卡财务交易系统的证券结构.第5部分:算法的使用 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 5: Use of algorithms) |
ISO 10202-6-1994 |
财务交易卡.集成电路卡财务交易系统的证券结构.第6部分:卡片盒的校验 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 6: Cardholder verification) |
ISO 10202-7-1998 |
财务交易卡.集成电路卡财务交易系统的证券结构.第7部分:键管理 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 7: Key management) |
ISO 10202-8-1998 |
财务交易卡.集成电路卡财务交易系统的证券结构.第8部分:通则和总论 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 8: General principles and overview) |
ISO 10203-1992 |
铁矿石.钙含量测定.火焰原子吸收光谱法 |
(Iron ores; determination of calcium content; flame atomic absorption spectrometric method) |
ISO 10204-1992 |
铁矿石.镁含量测定.火焰原子吸收光谱法 |
(Iron ores; determination of magnesium content; flame atomic absorption spectrometric method) |
ISO 10207 Technical Corrigendum 1-1991 |
凿岩设备.冲击钻用额定尺寸为22mm至38mm的穿钢绳钢钎设备.技术勘误1 |
(Rock drilling equipment; rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm; technical corrigendum 1) |
ISO 10207-1991 |
凿岩设备.冲击钻井用额定尺寸为22mm至38mm的圆螺纹钢钎设备 |
(Rock drilling equipment; rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm) |
ISO 10208-1991 |
凿岩设备.左旋圆螺纹 |
(Rock drilling equipment; left-hand rope threads) |
ISO 10209-1-1992 |
技术产品文献.词汇.第1部分:与技术制图相关的术语.总则和制图种类 |
(Technical product documentation; vocabulary; part 1: terms relating to technical drawings; general and types of drawings) |
ISO 10209-2-1993 |
技术产品文献加工.词汇.第2部分:有关投射方法的术语 |
(Technical product documentation; vocabulary; part 2: terms relating to projection methods) |
ISO 10209-4-1999 |
技术产品文献加工.词汇.第4部分:与建筑文献有关的条款 |
(Technical product documentation - Vocabulary - Part 4: Terms relating to construction documentation) |
ISO 1021-1980 |
飞机.发动机舱灭火器孔和门 |
(Aircraft; Engine nacelle fire extinguisher apertures and doors) |
ISO 10211-1-1995 |
高层建筑中的热桥.热流和表面温度.第1部分:一般计算方法 |
(Thermal bridges in building construction - Heat flow and surface temperatures - Part 1: General calculation methods) |
ISO 10211-2-2001 |
房屋建筑中的热桥.热流量和表面温度的计算.第2部分:线性热桥 |
(Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges) |
ISO 10213-1991 |
铝矿石.总铁含量的测定.三氯化钛还原法 |
(Aluminium ores; determination of total iron content; titanium trichloride reduction method) |
ISO 10215-1992 |
阳极化铝和铝合金.阳极氧化层图象明晰度的目视测定.图表比例尺法 |
(Anodized aluminium and aluminium alloys; visual determination of image clarity of anodic oxidation coatings; chart scale method) |
ISO 10216-1992 |
阳极化铝和铝合金.阳极氧化层图象明晰度的仪器测定.仪器法 |
(Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method) |
ISO 10218-1992 |
操纵工业机器人.安全 |
(Manipulating industrial robots; safety) |
ISO 1022-1988 |
航空航天.飞机气态氧充气管接头 |
(Aerospace; gaseous oxygen replenishment connection for use in fluid systems (old type); dimensions (inch series)) |
ISO 10223-1992 |
纺织机械.平经编织机.导向杆标准号 |
(Textile machinery; flat warp knitting machines; numbering of guide bars) |
ISO 10226-1991 |
铝矿石.取样偏差的实验检查方法 |
(Aluminium ores; experimental methods for checking the bias of sampling) |
ISO 10227-1996 |
人/人的代用品冲击(单向冲击)试验和评价.技术现状导则 |
(Human/human surrogate impact (single shock) testing and evaluation - Guidance on technical aspects) |
ISO 10228-1991 |
越野雪橇.捆绑接合面.试验螺钉的要求 |
(Cross-country skis; binding mounting area; requirements for test screws) |
ISO 10229-1994 |
水质.长期有毒物质对淡水鱼毒害程度的测定.有毒物质对硬头鳟鱼生长率影响的评定方法 |
(Water quality - Determination of the prolonged toxicity of substances to freshwater fish - Method of evaluating the effects of substances on the growth rate of rainbow trout (Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae))) |
ISO 1023-1974 |
飞机.高压空气充气阀 |
(Aircraft; High pressure air charging valves) |
ISO 10230-1990 |
自行车.花键套和链轮.配合尺寸 |
(Cycles; splined hub and sprocket; mating dimensions) |
ISO 10231 AMD 1-1999 |
摩托车轮胎.验证轮胎容量的试验方法.修改件1 |
(Motorcycle tyres - Test methods for verifying tyre capabilities; Amendment 1) |
ISO 10231-2003 |
摩托车轮胎.验证轮胎性能的试验方法 |
(Motorcycle tyres - Test methods for verifying tyre capabilities) |
ISO 10231-2003 |
摩托车轮胎.验证轮胎性能的试验方法 |
|
ISO 10236-1995 |
铝生产用含碳材料.电极用未煅烧过的焦炭和煅烧过的焦炭.散装密度的测定 |
(Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped)) |
ISO 10237-1997 |
铝生产中使用的碳素物.煅烧焦炭.残余氢含量的测定 |
(Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content) |
ISO 10238-1999 |
生产铝使用的碳素物.电极用硬沥青.仪器化方法测定硫含量 |
(Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method) |
ISO 10239 Technical Corrigendum 1-2001 |
小艇.液化石油气系统;技术勘误1 |
(Small craft - Liquefied petroleum gas (LPG) systems; Technical corrigendum 1) |
ISO 10239-2000 |
小型船舶.液化石油气系统 |
(Small craft - Liquefied petroleum gas (LPG) systems) |
ISO 10240-1995 |
小型船舶.船长手册 |
(Small craft - Owner`s manual) |
ISO 10240-2004 |
小型船舶.船主手册 |
|
ISO 10241-1992 |
国际术语标准.制定和规划 |
(International terminology standards; preparation and layout) |
ISO 10242-1-1998 |
压制用工具.凸模夹持器柄.第1部分:A型 |
(Tools for pressing - Punch holder shanks - Part 1: Type A) |
ISO 10242-2-1991 |
压制用工具.凸模柄.第2部分:C型 |
(Tools for pressing; punch holder shanks; part 2: type C) |
ISO 10242-3-1991 |
压制用工具.凸模柄.第3部分:D型 |
(Tools for pressing; punch holder shanks; part 3: type D) |
ISO 10243-1991 |
压制用工具.矩形截面压力弹簧.骨架尺寸和色彩编码 |
(Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding) |
ISO 10245-1-1994 |
起重机.限定和指示装置.第1部分:总则 |
(Cranes - Limiting and indicating devices - Part 1: General) |
ISO 10245-2-1994 |
起重机.限定和指示装置.第2部分:汽车起重机 |
(Cranes - Limiting and indicating devices - Part 2: Mobile cranes) |
ISO 10245-3-1999 |
起重机.限定和指示装置.第3部分:塔式起重机 |
(Cranes - Limiting and indicating devices - Part 3: Tower cranes) |
ISO 10245-4-2004 |
起重机.限制器和指示器.第4部分:动臂起重机 |
|
ISO 10245-4-2004 |
起重机.限制器和指示器.第4部分:动臂起重机 |
|
ISO 10245-5-1995 |
起重机.限定和指示装置.第5部分:架空移动起重机及便携桥式起重机 |
(Cranes - Limiting and indicating devices - Part 5: Overhead travelling and portal bridge cranes) |
ISO 10247-1990 |
输送带.面层的特性.分类 |
(Conveyor belts; characteristics of covers; classification) |
ISO 10248-1996 |
液体肥料.用液膜除雾法中止试样的脱水 |
(Fluid fertilizers - De-aeration of suspension samples by film disentrainment) |
ISO 10249-1996 |
液体肥料.初步的视觉检验和物理试验用试样制备 |
(Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing) |
ISO 10251-1997 |
铜,铅和硫化锌浓缩物.散装材料干燥过程中质量损失的测定 |
(Copper, lead and zinc sulfide concentrates - Determination of mass loss of bulk material on drying) |
ISO 10253-1995 |
水质.用有中脉的骨条藻属和有三突的褐指藻属进行的海底藻类生长限制试验 |
(Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum) |
ISO 10254-1995 |
空运货物和地面设备的词汇 |
(Air cargo and ground equipment - Vocabulary) |
ISO 10256-2003 |
冰球运动员用头和脸的保护装置 |
(Head and face protection for use in ice hockey) |
ISO 10256-2003 |
冰球运动员用头和脸的保护装置 |
|
ISO 10256-2003 |
冰球运动员用头和脸的保护装置 |
|
ISO 10257-1996 |
冰球运动员用的防护面具和舌帽 |
(Face protectors and visors for ice hockey players) |
ISO 10258-1994 |
硫化铜浓缩物.铜含量测定.滴定法 |
(Copper sulfide concentrates - Determination of copper content - Titrimetric methods) |
ISO 1026-1982 |
水果和蔬菜制品.用减压干燥法测定干物质含量和用共沸蒸馏法测定水含量 |
(Fruit and vegetable products; Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation) |
ISO 10260-1992 |
水质.生物化学参数测量.a-叶绿素浓缩光谱测定 |
(Water quality; measurement of biochemical parameters; spectrometric determination of the chlorophyll-a concentration) |
ISO 10261-2002 |
土方机械.产品识别标准号方式系统 |
(Earth-moving machinery - Product identification numbering system) |
ISO 10262-1998 |
土方机械.液压挖掘机.驾驶员防护装置的实验室试验和性能要求 |
(Earth-moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards) |
ISO 10263-1-1994 |
土方机械操作者的工作环境.第1部分:总则和定义 |
(Earth-moving machinery - Operator enclosure environment - Part 1: General and definitions) |
ISO 10263-2-1994 |
土方机械操作者的工作环境.第2部分:空气过滤器的检验 |
(Earth-moving machinery - Operator enclosure environment - Part 2: Air filter test) |
ISO 10263-3-1994 |
土方机械操作者的工作环境.第3部分:操作者密封驾驶室的加压检验法 |
(Earth-moving machinery - Operator enclosure environment - Part 3: Operator enclosure pressurization test method) |
ISO 10263-4-1994 |
土方机械操作者的工作环境.第4部分:操作者密封驾驶室的通风,加热和/或空调检验法 |
(Earth-moving machinery - Operator enclosure environment - Part 4: Operator enclosure ventilation, heating and/or air-conditioning test method) |
ISO 10263-5-1994 |
土方机械操作者的工作环境.第5部分:操作者密封驾驶室的挡风玻璃的除霜系统的检验法 |
(Earth-moving machinery - Operator enclosure environment - Part 5: Windscreen defrosting system test method) |
ISO 10263-6-1994 |
土方机械操作者的工作环境.第6部分:操作者密封驾驶室受太阳光照射效力的测定 |
(Earth-moving machinery - Operator enclosure environment - Part 6: Determination of effect of solar heating on operator enclosure) |
ISO 10264-1990 |
土方机械.钥匙锁闭起动装置 |
(Earth-moving machinery; key-locked starting systems) |
ISO 10265-1998 |
土方机械.履带式机械.制动系统的性能要求和试验方法 |
(Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems) |
ISO 10266-1992 |
土方机械.机器内流体装置工作倾斜度极限的测定.静态试验 |
(Earth-moving machinery; determination of slope limits for machine fluid systems operation; static test method) |
ISO 10268-1993 |
土方机械.翻斗车和拖拉式平地机的减速器.性能试验 |
(Earth-moving machinery; retarders for dumpers and tractor-scrapers; performance tests) |
ISO 1027-1983 |
无损检验用射线照相图象质量指示器.原理和鉴定 |
(Radiographic image quality indicators for non-destructive testing; Principles and identification) |
ISO 10270 Technical Corrigendum 1-1997 |
金属和合金的腐蚀.核动力反应堆用锆合金的水腐蚀试验.技术勘误1 |
(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors; Technical corrigendum 1) |