标准号 |
中文名称 |
英文名称 |
| ISO 11130-1999 |
金属和合金的腐蚀.盐溶液中的交替浸入试验 |
(Corrosion of metals and alloys - Alternate immersion test in salt solution) |
| ISO 11131-1992 |
银行和有关金融业务.签字鉴定 |
(Banking and related financial services; sign-on authentication) |
| ISO 11134-1994 |
卫生防疫用品的消毒.批准和控制程序.工业湿热的消毒 |
(Sterilization of health care products; requirements for validation and routine control; industrial moist heat sterilization) |
| ISO 11135 Technical Corrigendum 1-1994 |
医疗设备.用环氧乙烷消毒的批准和控制程序.工业湿热的消毒.技术勘误表1 |
(Medical devices - Validation and routine control of ethylene oxide sterilization; Technical Corrigendum 1) |
| ISO 11135-1994 |
医疗设备.用环氧乙烷消毒的批准和控制程序.工业湿热的消毒. |
(Medical devices; validation and routine control of ethylene oxide sterilization) |
| ISO 11137 AMD 1-2001 |
医疗保健产品的灭菌.确认和常规控制要求.辐射灭菌.剂量设定条件的选择 |
(Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization; Amendment 1: Selection of terms for dose setting) |
| ISO 11137 Technical Corrigendum 1-1997 |
护理制品的灭菌.证实和过程控制要求.辐射灭菌.技术勘误表1 |
(Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization; Technical Corrigendum 1) |
| ISO 11137-1995 |
卫生管理制品的灭菌.批准和常规控制的要求.辐射灭菌 |
(Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization) |
| ISO 11138-1-1994 |
保健产品的消毒.生物指示剂.第1部分:通则 |
(Sterilization of health care products - Biological indicators - Part 1: General) |
| ISO 11138-2-1994 |
保健产品的消毒.生物指示剂.第2部分:环氧乙烷灭菌用生物指示剂 |
(Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization) |
| ISO 11138-3-1995 |
保健产品的灭菌.生物指示剂.第3部分:加热水蒸气灭菌用生物指示剂 |
(Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization) |
| ISO 1114-1977 |
可可豆.切割试验 |
(Cocoa beans; Cut test) |
| ISO 11140-1 AMD 1-1998 |
卫生保健产品的灭菌.化学指示剂.第1部分:一般要求.修改件1 |
(Sterilization of health care products - Chemical indicators - Part 1: General requirements; Amendment 1) |
| ISO 11140-1-1995 |
卫生保健产品的灭菌.化学指示剂.第1部分:一般要求 |
(Sterilization of health care products - Chemical indicators - Part 1: General requirements) |
| ISO 11140-2-1998 |
卫生保健产品的灭菌.化学指示剂.第2部分:试样设备和方法 |
(Sterilization of health care products - Chemical indicators - Part 2: Test equipment and methods) |
| ISO 11140-3-2000 |
卫生保健产品的灭菌.化学指示器.第3部分:蒸气渗透试验薄板材用2级指示器 |
(Sterilization of health care products - Chemical indicators- Part 3: Class 2 indicators for steam penetration test sheets) |
| ISO 11140-4-2001 |
保健产品的灭菌.化学指示剂.第4部分:蒸气渗透试验包装件用化学指示剂 |
(Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators for steam penetration test packs) |
| ISO 11140-5-2000 |
卫生保健产品的灭菌.化学指示器.第5部分:气体消除试验薄板和包装用2级指示器 |
(Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for air removal test sheets and packs) |
| ISO 11143 Technical Corrigendum 1-2002 |
牙科设备.汞齐合金分离器.技术勘误1 |
(Dental equipment - Amalgam separators; Technical Corrigendum 1) |
| ISO 11143-1999 |
牙科设备.汞齐合金分离器 |
(Dental equipment - Amalgam separators) |
| ISO 11144-1995 |
牙科设备.漱口冲洗牙用给排水管接头 |
(Dental equipment - Connections for supply and waste lines) |
| ISO 11145-2001 |
光学和光学仪器.激光和有关的激光设备的词汇和符号 |
(Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols) |
| ISO 11146-1999 |
激光和激光相关设备.激光束参数的试验方法.束宽、分散角度和束比例因子 |
(Laser and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor) |
| ISO 11149-1997 |
光学和光学仪器.激光及相关激光设备.非电信激光设备用光纤连接器 |
(Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser applications) |
| ISO 11151-1-2000 |
激光和激光相关设备.标准光学部件.第1部分:紫外线、可见的和近红外线光谱范围用部件 |
(Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges) |
| ISO 11151-2-2000 |
激光和激光相关设备.标准光学部件.第2部分:红外线光谱范围用部件 |
(Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range) |
| ISO 11154-1-1995 |
道路车辆.车顶负荷量.第1部分:车顶杆 |
(Road vehicles - Roof load carriers - Part 1: Roof bars) |
| ISO 11154-4-2004 |
道路车辆.车顶载物架.第4部分:磁性固定装置 |
|
| ISO 11157-1999 |
道路车辆.制动片组件.惯性测力计试验方法 |
(Road vehicles - Brake lining assemblies - Inertia dynamometer test method) |
| ISO 11158-1997 |
润滑剂,工业油和相关产品(L类).H族(液压设备).HH,HL,HM,HR,HG和HV类规范 |
(Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG) |
| ISO 1116-1999 |
缩微复制品.16mm和35mm缩微胶片.卷轴和片盘.规范 |
(Micrographics - 16 mm and 35 mm microfilm spools and reels - Specifications) |
| ISO 11161-1994 |
工业自动化系统.集成制造系统的安全.基本要求 |
(Industrial automation systems; safety of integrated manufacturing systems; basic requirements) |
| ISO 11162-2001 |
盐水中干胡椒.规范和试验方法 |
(Peppercorns (Piper nigrum L.) in brine - Specification and test methods) |
| ISO 11163-1995 |
干甜罗勒属植物(香料)规范 |
(Dried sweet basil (Ocimum basilicum L.) - Specification) |
| ISO 11165-1995 |
干制鼠尾草规范 |
(Dried sage (Salvia officinalis L.) - Specification) |
| ISO 11168-1995 |
火花塞和热线点火塞用管套扳手 |
(Socket wrenches for spark- and glow-plugs) |
| ISO 11169-1993 |
林业机械.轮式专用机器.词汇、性能试验方法和制动系统规则 |
(Machinery for forestry; wheeled special machines; vocabulary, performance test methods and criteria for brake systems) |
| ISO 11170-2003 |
液压传动.滤芯.性能特性检验的试验序列 |
(Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics) |
| ISO 11170-2003 |
液压传动.滤芯.性能特性检验的试验序列 |
|
| ISO 11171 Technical Corrigendum 1-2001 |
液力传动.液体自动粒子计数器的校正.技术勘误1 |
(Hydraulic fluid power - Calibration of automatic particle counters for liquids; Technical Corrigendum 1) |
| ISO 11171-1999 |
液压传动.液体自动粒子计数器的校正 |
(Hydraulic fluid power - Calibration of automatic particle counters for liquids) |
| ISO 11173-1994 |
热塑性塑料管.抗外置增压强度的测定.楼梯法 |
(Thermoplastics pipes - Determination of resistance to external blows - Staircase method) |
| ISO 11174-1996 |
工作地点空气.用燃烧和电热原子吸收光谱测定法对镉离子和镉化合物的测定 |
(Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method) |
| ISO 11178-1995 |
八角大茴香规范 |
(Star anise (Illicium verum Hook. f.) - Specification) |
| ISO 1118-1978 |
铝和铝合金.钛含量的测定.铬变酸分光光度法 |
(Aluminium and aluminium alloys; Determination of titanium; Spectrophotometric chromotropic acid method) |
| ISO 11180-1993 |
邮递地址 |
(Postal addressing) |
| ISO 1119-1998 |
产品几何量技术规范(GPS).锥度和锥度角系列 |
(Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles) |
| ISO 11191-1997 |
储气瓶.储气瓶阀门连接用25E锥形螺纹.检查仪表 |
(Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Inspection gauges) |
| ISO 11193-1-2002 |
一次性医用检验手套.第1部分:用橡胶乳和胶液制成的手套规范 |
(Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution) |
| ISO 11195-1995 |
医疗用气体混合装置.独立气体混合装置 |
(Gas mixers for medical use - Stand-alone gas mixers) |
| ISO 11196 Technical Corrigendum 1-1997 |
麻醉气体检测器.技术勘误表1 |
(Anaesthetic gas monitors; Technical Corrigendum 1) |
| ISO 11196-1995 |
麻醉气体检测器 |
(Anaesthetic gas monitors) |
| ISO 11197-1996 |
电气医疗设备.医用供电装置的特殊要求 |
(Medical electrical equipment - Particular requirements for safety of medical supply units) |
| ISO 11197-2004 |
医用配供装置 |
|
| ISO 11199-1-1999 |
双臂操作的助步器,要求和试验方法.第1部分:步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames) |
| ISO 11199-2-1999 |
双臂操作的助步器,要求和试验方法.第2部分:滚动器 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators) |
| ISO 1120-2002 |
输送机皮带.机械紧固件的强度测定.静态试验法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method) |
| ISO 11200 Technical Corrigendum 1-1997 |
声学.机械和设备发出的噪声.工作站和其他特定位置发射的声压级测定用基本标准的使用指南.技术勘误表1 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions; Technical Corrigendum 1) |
| ISO 11200-1995 |
声学.机械和设备发出的噪声.在工作站和其他特定位置发射声压级测定的基本标准使用导则 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions) |
| ISO 11201 Technical Corrigendum 1-1997 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所声压级的测量.反射平面上基本自由声波场的工程测试 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane; Technical Corrigendum 1) |
| ISO 11201-1995 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所声压级的测量.反射平面上基本自由声波场的工程测试 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane) |
| ISO 11202-1995 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所声压级的测量.调查法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ) |
| ISO 11203-1995 |
声学.机械装置及设备发出的噪声.在工作地点和其它试验场所从声功率级测量声压级 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level) |
| ISO 11204 Technical Corrigendum 1-1997 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所声压级的测量.测试要求环境条件的改变.技术勘误表1 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections; Technical Corrigendum 1) |
| ISO 11204-1995 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所声压级的测量.测试要求环境条件的改变 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections) |
| ISO 11205-2003 |
声学.机械和设备发射的噪声.利用声强现场测定工作位置和其他指定位置发射声压级的工程法 |
|
| ISO 11210-1995 |
在铂饰用合金中铂含量测定.六氯铂酸二铵沉淀后测定重量 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate) |
| ISO 11212-1-1997 |
淀粉和淀粉制品.重金属含量.第1部分:原子吸收光谱法测定砷含量 |
(Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry) |
| ISO 11212-2-1997 |
淀粉和淀粉制品.重金属含量.第2部分:原子吸收光谱法测定汞含量 |
(Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry) |
| ISO 11212-3-1997 |
淀粉和淀粉制品.重金属含量.第3部分:电热原子化原子吸收光谱法测定铅含量 |
(Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization) |
| ISO 11212-4 Technical Corrigendum 1-1997 |
淀粉和淀粉制品.重金属含量.第4部分:电热原子化原子吸收光谱法测定镉含量.技术勘误表1 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization; Technical Corrigendum 1) |
| ISO 11212-4-1997 |
淀粉和淀粉制品.重金属含量.第4部分:电热原子化原子吸收光谱法测定镉含量 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization) |
| ISO 11213-1995 |
淀粉和淀粉制品的检验.用酶催化法测定淀粉的乙酰基的含量 |
(Modified starch - Determination of acetyl content - Enzymatic method) |
| ISO 11214-1996 |
改进的淀粉.氧化淀粉中羟基团含量的测定 |
(Modified starch - Determination of carboxyl group content of oxidized starch) |
| ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的测定.气相色谱法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method) |
| ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基团含量的测定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch) |
| ISO 11217-1993 |
航空航天.液压系列液体污染物.取样点定位和取样准则 |
(Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling) |
| ISO 11218-1993 |
航空航天.液压液清洁度分类 |
(Aerospace; cleanliness classification for hydraulic fluids) |
| ISO 1122-1 Technical Corrigendum 1-1999 |
齿轮术语词汇.第1部分:几何学上的定义.技术勘误1 |
(Vocabulary of gear terms - Part 1: Definitions related to geometry; Technical Corrigendum 1) |
| ISO 1122-1-1998 |
齿轮术语词汇.第1部分:几何学上的定义 |
(Vocabulary of gear terms - Part 1: Definitions related to geometry) |
| ISO 1122-2-1999 |
齿轮术语词汇.第2部分:与蜗轮齿轮几何特性有关的定义 |
(Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry) |
| ISO 11222-2002 |
空气质量.空气质量测量的时间平均值不确定性的测定 |
(Air quality - Determination of the uncertainty of the time average of air quality measurements) |
| ISO 11223-1-1995 |
石油和液态石油产品.直接静态测量.直立水箱储存的含量.第1部分:液压油罐中量油的质量测量 |
(Petroleum and liquid petroleum products - Direct static measurements - Contents of vertical storage tanks - Part 1: Mass measurement by hydrostatic tank gauging) |
| ISO 11223-2004 |
石油和液态石油产品.直接静态测量.通过静压油罐计量测量立式贮罐容量 |
|
| ISO 11224-2003 |
纺织品.非织造布成网及粘合.词汇 |
(Textiles - Web formation and bondingin nonwovens - Vocabulary ) |
| ISO 11224-2003 |
纺织品.非织造布成网及粘合.词汇 |
|
| ISO 11226-2000 |
人类工效学.静态工作姿势的评定 |
(Ergonomics - Evaluation of static working postures) |
| ISO 11228-1-2003 |
人类工效学.人工搬运.第1部分:提升和运送 |
(Ergonomics - Manual handling - Part 1: Lifting and carrying) |
| ISO 11228-1-2003 |
人类工效学.人工搬运.第1部分:提升和运送 |
|
| ISO 11234-1995 |
橡胶化合物配料.粒状炭黑.尘埃含量的测定 |
(Rubber compounding ingredients - Carbon black (pelletized) - Determination of dust content) |
| ISO 11235-1999 |
橡胶化合物配料.亚磺酰胺催速剂.试验方法 |
(Rubber compounding ingredients - Sulfenamide accelerators - Test methods) |
| ISO 11236-2000 |
橡胶复合成份..苯二胺抗降解剂.试验方法 |
(Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods) |
| ISO 11237-1-2004 |
橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第1部分:用于油基液体 |
|
| ISO 1124-1988 |
橡胶配方配合剂.炭黑.装运取样规程 |
(Rubber compounding ingredients; carbon black shipment sampling procedures) |
| ISO 11241-1994 |
飞机.航空发动机运输装置 |
(Aircraft - Aircraft engine transport devices) |
| ISO 11242-1996 |
飞行器.货运集装箱等压要求 |
(Aircraft - Pressure equalization requirements for cargo containers) |
| ISO 11243-1994 |
自行车.自行车用行李架.概念、分类和试验 |
(Cycles - Luggage carriers for bicycles - Concepts, classification and testing) |
| ISO 11244-1998 |
牙科用钎焊包埋料 |
(Dental brazing investments) |
| ISO 11245-1999 |
牙齿修复.磷酸盐粘结耐火模铸材料 |
(Dental restorations - Phosphate-bonded refractory die materials) |
| ISO 11246-1996 |
牙科硅酸乙脂粘接铸造包埋料 |
(Dental ethyl silicate bonded casting investments) |
| ISO 11248-1993 |
塑料.热固模塑材料.高温下短期特性的评定 |
(Plastics; thermosetting moulding materials; evaluation of short-term performance at elevated temperatures) |
| ISO 1125-1999 |
橡胶配方配合剂.炭黑.灰份含量的测定 |
(Rubber compounding ingredients - Carbon black - Determination of ash) |
| ISO 11252-1993 |
激光和激光相关设备.激光装置.对文件的最低要求 |
(Lasers and laser-related equipment; laser device; minimum requirements for documentation) |
| ISO 11252-2004 |
激光和激光设备.激光装置.对文件的最低要求 |
|
| ISO 11252-2004 |
激光和激光设备.激光装置.对文件的最低要求 |
|
| ISO 11253-1993 |
激光和激光相关设备.激光装置.机械接口 |
(Lasers and laser related equipment; laser device; mechanical interfaces) |
| ISO 11254-1-2000 |
激光和激光相关设备.激光表面激光诱导损伤阈的测定.第1部分:1-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test) |
| ISO 11254-2-2001 |
激光和激光相关设备.光学表面激光诱导损伤阈的测定.第2部分:S-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test) |
| ISO 11256-1998 |
铁矿丸.气体转化直接还原用原料团的测定 |
(Iron ore pellets - Determination of clustering of feedstock for direct reduction by gas reforming processes) |
| ISO 11257-1998 |
铁矿石.气体转化直接还原法测定原料的衰变和矿化 |
(Iron ores - Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes) |
| ISO 11258-1999 |
铁矿石.通过气体重新成型加工直接还原的饲喂托盘的还原性和金属喷镀性的测定 |
(Iron ores - Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes) |
| ISO 11259-1998 |
土壤质量.土壤的简单说明 |
(Soil quality - Simplified soil description) |
| ISO 1126-1992 |
橡胶混合物成分.炭黑.加热损失的测定 |
(Rubber compounding ingredients; carbon black; determination of loss on heating) |
| ISO 11260 Technical Corrigendum 1-1996 |
土壤质量.用钡氯溶液测定有效阳离子交换能力和基本饱和水平.技术勘误表1 |
(Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution; Technical Corrigendum 1) |
| ISO 11260-1994 |
土壤质量.用钡氯溶液测定有效阳离子交换能力和基本饱和水平 |
(Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution) |
| ISO 11261-1995 |
土壤质量.氮的总含量测定.基尔达斯法 |
(Soil quality - Determination of total nitrogen - Modified Kjeldahl method) |
| ISO 11262-2003 |
土壤质量.氰化物的测定 |
(Soil quality - Determination of cyanide) |
| ISO 11262-2003 |
土壤质量.氰化物的测定 |
|
| ISO 11263-1994 |
土壤质量.磷的测定.在碳酸氢钠溶液中可溶磷的光谱测定 |
(Soil quality - Determination of phosphorus - Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution) |
| ISO 11265 Technical Corrigendum 1-1996 |
土壤.电导性比率的测定.技术勘误1 |
(Soil quality - Determination of the specific electrical conductivity; Technical Corrigendum 1) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com