标准号 |
中文名称 |
英文名称 |
| prEN ISO 14314-2000 |
往复式内燃机反向起动设备一般要求 |
Reciprocating internal combustion engines - Re-coil starting equipment - General safety requirements (ISO/DIS 14314:2000) |
| prEN ISO 14327-2003 |
电阻焊电阻点焊、凸焊及缝焊用片可焊性的测定方法 |
Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO/FDIS 14327:2003) |
| prEN ISO 14439-2000 |
建筑玻璃镶玻璃的要求玻璃块的使用 |
Glass in building - Glazing requirements - Use of glazing blocks (ISO/DIS 14439:2000) |
| prEN ISO 14520-1-2000 |
气体灭火系统物理特性和系统设计第1部分：一般要求 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements (ISO/FDIS 14520-1:2000) |
| prEN ISO 14520-10-2000 |
气体灭火系统物理特性和系统设计第10部分：HFC 23灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant (ISO/FDIS 14520-10:2000) |
| prEN ISO 14520-11-2000 |
气体灭火系统物理特性和系统设计第11部分：HFC 236fa灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant (ISO/FDIS 14520-11:2000) |
| prEN ISO 14520-12-2000 |
气体灭火系统物理特性和系统设计第12部分： IG-01灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant (ISO/FDIS 14520-12:2000) |
| prEN ISO 14520-13-2000 |
气体灭火系统物理特性和系统设计第13部分： IG-100灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant (ISO/FDIS 14520-13:2000) |
| prEN ISO 14520-14-2000 |
气体灭火系统物理特性和系统设计第14部分： IG-55灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant (ISO/FDIS 14520-14:2000) |
| prEN ISO 14520-15-2000 |
气体灭火系统物理特性和系统设计第15部分： IG-541灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant (ISO/FDIS 14520-15:2000) |
| prEN ISO 14520-2-2000 |
气体灭火系统物理特性和系统设计第2部分：CF3I灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CF3I extinguishant (ISO/FDIS 14520-2:2000) |
| prEN ISO 14520-3-2000 |
气体灭火系统物理特性和系统设计第3部分：FC-2-1-8灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 3: FC-2-1-8 extinguishant (ISO/FDIS 14520-3:2000) |
| prEN ISO 14520-4-2000 |
气体灭火系统物理特性和系统设计第4部分：FC-3-1-10灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 4: FC-3-1-10 extinguishant (ISO/FDIS 14520-4:2000) |
| prEN ISO 14520-5-1998 |
气体灭火系统物理特性和系统设计第5部分： FC-5-1-14灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 5: FC-5-1-14 extinguishant (ISO/DIS 14520-5:1998) |
| prEN ISO 14520-6-2000 |
气体灭火系统物理特性和系统设计第6部分： HCFC混合A的灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 6: HCFC Blend A extinguishant (ISO/FDIS 14520-6:2000) |
| prEN ISO 14520-7-2000 |
气体灭火系统物理特性和系统设计第7部分：HCFC 124灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 7: HCFC 124 extinguishant (ISO/FDIS 14520-7:2000) |
| prEN ISO 14520-8-2000 |
气体灭火系统物理特性和系统设计第8部分：HFC 125灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HFC 125 extinguishant (ISO/FDIS 14520-8:2000) |
| prEN ISO 14520-9-2000 |
气体灭火系统物理特性和系统设计第9部分：HFC 227ea灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant (ISO/FDIS 14520-9:2000) |
| prEN ISO 14617-1-2002 |
图表用图形符号第1部分：一般信息及索引 |
Graphical symbols for diagrams - Part 1: General information and indexes (ISO/FDIS 14617-1:2002) |
| prEN ISO 14617-10-2002 |
图表用图形符号第10部分：流体动力转换器 |
Graphical symbols for diagrams - Part 10: Fluid power converters (ISO/FDIS 14617-10:2002) |
| prEN ISO 14617-11-2002 |
图表用图形符号第11部分：传热装置及热力机 |
Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines (ISO/FDIS 14617-11:2002) |
| prEN ISO 14617-12-2002 |
图表用图形符号第12部分：分离、提纯和搅拌装置 |
Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing (ISO/FDIS 14617-12:2002) |
| prEN ISO 14617-2-2002 |
图表用图形符号第2部分：一般用图形符号 |
Graphical symbols for diagrams - Part 2: Graphical symbols having general application (ISO/FDIS 14617-2) |
| prEN ISO 14617-3-2002 |
图表用图形符号第3部分：接头及相关装置 |
Graphical symbols for diagrams - Part 3: Connections and related devices (ISO/FDIS 14617-3:2002) |
| prEN ISO 14617-4-2002 |
图表用图形符号第4部分：激励器及相关装置 |
Graphical symbols for diagrams - Part 4: Actuators and related devices (ISO/FDIS 14617-4:2002) |
| prEN ISO 14617-5-2002 |
图表用图形符号第5部分：测量及控制装置 |
Graphical symbols for diagrams - Part 5: Measurement and control devices (ISO/FDIS 14617-5:2002) |
| prEN ISO 14617-6-2002 |
图表用图形符号第6部分：测量及控制系统职能 |
Graphical symbols for diagrams - Part 6: Measurement and control functions (ISO/FDIS 14617-6:2002) |
| prEN ISO 14617-7-2002 |
图表用图形符号第7部分：基本的机械件 |
Graphical symbols for diagrams - Part 7: Basic mechanical components (ISO/FDIS 14617-7:2002) |
| prEN ISO 14617-8-2002 |
图表用图形符号第8部分：阀及挡板 |
Graphical symbols for diagrams - Part 8: Valves and dampers (ISO/FDIS 14617-8:2002) |
| prEN ISO 14617-9-2002 |
图表用图形符号第9部分：泵、压缩机和风扇 |
Graphical symbols for diagrams - Part 9: Pumps, compressors and fans (ISO/FDIS 14617-9:2002) |
| prEN ISO 14644-5-2001 |
洁净室和相关控制环境第5部分：操作 |
Cleanrooms and associated controlled environments - Part 5: Operations (ISO/DIS 14644-5:2001) |
| prEN ISO 14644-7-2001 |
洁净室和相关控制环境第7部分：分离外壳(清洁排气罩、手套箱、绝缘子、小环境) |
Cleanrooms and associated controlled environments - Part 7: Separative enclosures (clean air hoods, gloveboxes, isolators, mini-environments) (ISO/DIS 14644-7:2001) |
| prEN ISO 14678-1995 |
胶粘剂流动阻力的测定(垂度) |
Adhesives - Determination of resistance to flow (sagging) (ISO/DIS 14678:1995) |
| prEN ISO 14688-2-2003 |
土工工程土壤的识别与分类第2部分：分类原则与特性的定量描述 |
Geotechnical investigation and testing - Identification and classification of soil - Part 2: Classification principles quantification (ISO/FDIS 14688-2:2003) |
| prEN ISO 14689-1-2003 |
土木工程中的土工技术岩石的识别与描述 |
Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description (ISO/FDIS 14689-1:2003) |
| prEN ISO 14698-3-1999 |
洁净室和相关控制环境生物污染控制第3部分：受生物污染的湿土壤/或生物膜的惰性表面清洁和/或消毒效果 |
Cleanrooms and associated controlled environments - Biocontamination control - Part 3: Measurement of the efficiency of processes of cleaning and/or disinfection of inert surfaces bearing biocontaminated wet soiling or biofilms (ISO/DIS 14698-3:1999) |
| prEN ISO 14819-3-2003 |
交通及旅客信息(TTI)经过交通电文编码的 TTI 电文第3部分：ALERT-C的定位 |
Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 3: Location referencing for ALERT-C (ISO/FDIS 14819-3:2003) / Note: Intended as replacement for ENV ISO 14819-3 (2000-11). |
| prEN ISO 14825-2002 |
智能运输系统地理数据文件(GDF)总的数据规范 |
Intelligent transport systems - Geographic Data Files (GDF) - Overall data specification (ISO/DIS 14825:2002) |
| prEN ISO 14828-1999 |
塑料管道系统玻璃纤维增强热固塑料管在湿环境下长期特殊环形松弛劲度的测定和湿松弛系数的计算 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor (ISO/DIS 14828:1999) |
| prEN ISO 14876-1-2002 |
防护服人体防护用具第1部分：一般要求 |
Protective clothing - Body armour - Part 1: General requirements (ISO/FDIS 14876-1:2002) |
| prEN ISO 14876-2-2002 |
防护服人体防护用具第2部分：防弹性 |
Protective clothing - Body armour - Part 2: Bullet resistance (ISO/FDIS 14876-2:2002) |
| prEN ISO 14876-3-2002 |
防护服人体防护用具第3部分：防小刀刺穿性 |
Protective clothing - Body armour - Part 3: Knife stab resistance (ISO/FDIS 14876-3:2002) |
| prEN ISO 14876-4-2002 |
防护服人体防护用具第4部分：防针刺穿性要求及试验方法 |
Protective clothing - Body armor - Part 4: Needle and spike stab resistance; Requiremnets and test methods (ISO/DIS 14876-4:2002) |
| prEN ISO 14924-2002 |
热喷涂热喷涂层的后处理及终饰 |
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO/DIS 14924:2002) |
| prEN ISO 14931-1998 |
皮革服装(不包括毛皮制手套)用革的性能 |
Leather - Leather characteristics for apparel (excluding furs) (ISO/DIS 14931:1998) |
| prEN ISO 14945-1999 |
小艇施工塔板 |
Small craft - Builders plate (ISO/DIS 14945:1999) |
| prEN ISO 14978-2002 |
产品几何量技术规范(GPS)GPS测量设备的一般概念及要求 |
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO/DIS 14978:2002) |
| prEN ISO 15002-1996 |
医用气体管道系统终端装置用气流量测量装置 |
Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO/DIS 15002:1996) |
| prEN ISO 15006-2002 |
道路车辆运输信息及控制系统的人类工效学信息方式车内听力表示的规范及相应方法 |
Road vehicles - Ergonomic aspect of transport information and control systems - Specification and compliance procedures for in-vehicle auditiory presentation (ISO/DIS 15006:2002) / Note: Endorsement notice |
| prEN ISO 15012-1-2000 |
焊接和有关工艺中的健康和安全空气过滤设备的要求、试验和标记第1部分：焊接烟尘分离效率的试验 |
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 1: Testing of the separation efficiency for welding fume (ISO/DIS 15012-1:2000) |
| prEN ISO 15012-2-2000 |
焊接和有关工艺中的健康和安全空气过滤设备的要求、试验和标记第2部分：焊接烟尘排放装置的安装部位的 |
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Testing of the capture zone of welding fume extraction devices (ISO/DIS 15012-2:2000) |
| prEN ISO 15014-1998 |
聚偏氟乙烯挤制板要求和试验方法 |
Extruded sheets of polyvinylidene fluoride (PVDF) - Requirements and test methods (ISO/DIS 15014:1998) |
| prEN ISO 15015-1997 |
改进冲击性能的丙烯腈/苯乙烯共聚物的挤制板(ABS、AES 或 ASA)要求及试验方法 |
Extruded sheets of impact-modified acrylonitrile/styrene copolymers (ABS, AES or ASA) - Requirements and test methods (ISO/DIS 15015:1997) |
| prEN ISO 15077-1996 |
农业及林业用拖拉机和自行式机械驾驶机器操作控制装置操纵力、操作位移、操作位置和操作方法 |
Tractors and self propelled machinery for agriculture and forestry - Ride on machines - Operator controls - Actuating forces, displacement, location and method of operation (ISO/DIS 15077:1996) |
| prEN ISO 1514-2001 |
色漆和清漆试验用准板 |
Paints and varnishes - Standard panels for testing (ISO/DIS 1514:2001) |
| prEN ISO 15156-3-2003 |
石油和天然气工业在石油和天然气生产中用于硫化氢环境的材料第3部分：耐裂合金(CRAs)(耐蚀合金)和其他 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2003) |
| prEN ISO 15236-1-1996 |
钢芯传输带第1部分：一般用传输带的设计、尺寸及机械性能要求 |
Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO/DIS 15236-1:1996) |
| prEN ISO 15236-2-2000 |
钢芯传输带第2部分：优先传输带类型 |
Steel cord conveyor belts - Part 2: Preferred belt types (ISO/DIS 15236-2:2000) |
| prEN ISO 15236-4-2000 |
钢芯传输带第4部分：硫化橡胶传输带接头、设计、尺寸、要求、标记 |
Steel cord conveyor belts - Part 4: Vulcanized belt joints; Design, dimensions, requirements, marking (ISO/DIS 15236-4:2000) |
| prEN ISO 15320-2002 |
纸浆、纸和纸板五氯苯酚的测定 |
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO/FDIS 15320:2002) |
| prEN ISO 15384-2000 |
消防服野外消防服的实验室试验方法和性能要求 |
Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing (ISO/DIS 15384:2000) |
| prEN ISO 15465-2002 |
管道工程条绕金属软管和软管组件 |
Pipework - Stripwound metal hoses and hose assemblies (ISO/DIS 15465:2002) |
| prEN ISO 15496-2001 |
纺织品用于纺织品质量控制的测定水蒸汽渗透法 |
Textiles - Measurement of water vapour permeabiliy of textiles for the purpose of quality control (ISO/DIS 15496:2001) |
| prEN ISO 15508-2000 |
塑料无支撑的挤制和/或压延的增塑聚氯乙烯(PVC-P)塑料薄膜或薄板材命名的基本原理及试验方法 |
Plastics - Film or sheeting of plasticizied poly(vinyl chloride) (PVC-P) extruded and/or calendered, unsupported - Basis for designation and test methods (ISO/DIS 15508:2000) |
| prEN ISO 15527-1998 |
聚乙烯(PE-UHMW, PE-HMW, PE-HD)压模制薄板要求 |
Compression moulded sheets of polyethylene (PE-UHMW, PE-HMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:1998) |
| prEN ISO 15536-1-2002 |
人类工效学计算机人体模型和人体模型第1部分：一般要求 |
Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO/DIS 15536-1:2002) |
| prEN ISO 15537-2002 |
检验工业产品与设计的人体信息用试验人员的选择与使用原则 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO/DIS 15537:2002) |
| prEN ISO 15607-2003 |
金属焊接工艺的规范及验收一般规则 |
Specification and qualification of welding procedures for metallic materials - General rules (ISO/FDIS 15607:2003) |
| prEN ISO 15609-1-2000 |
金属焊接工艺的规范和验收焊接工艺规范第1部分：电弧焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2000) |
| prEN ISO 15609-3-2000 |
金属焊接工艺的规范和验收焊接工艺规范第3部分：电子束焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:2000) |
| prEN ISO 15609-4-2000 |
金属焊接工艺的规范和验收焊接工艺规范第4部分：激光束焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000) |
| prEN ISO 15609-5-2000 |
金属焊接工艺的规范和验收焊接工艺规范第5部分：电阻焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO/DIS 15609-5:2000) |
| prEN ISO 15610-2003 |
金属焊接工艺的规范和验收用经批准的焊接消耗材料验收 |
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/FDIS 15610:2003) |
| prEN ISO 15611-2003 |
金属焊接工艺的规范和验收用焊接经验进行验收 |
Specification and qualification of welding procedures for metallic materials - AQualification based on previous welding experience (ISO/FDIS 15611:2003) |
| prEN ISO 15612-2000 |
金属焊接工艺的规范和验收用标准焊接工艺进行验收 |
Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure (ISO/DIS 15612:2000) |
| prEN ISO 15613-2003 |
金属焊接工艺的规范和验收用试生产试验进行验收 |
Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO/FDIS 15613:2003) |
| prEN ISO 15614-1-2003 |
金属焊接工艺的规范和验收焊接工艺试验第1部分：钢的电弧焊和气焊及镍和镍合金的焊接 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003) |
| prEN ISO 15614-10-2000 |
金属焊接工艺的规范和验收焊接工艺试验第10部分：超基干焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000) |
| prEN ISO 15614-12-2000 |
金属焊接工艺的规范和验收焊接工艺试验第12部分：点焊、缝焊及凸焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, sean and projection welding (ISO/DIS 15614-12:2000) |
| prEN ISO 15614-2-2000 |
金属焊接工艺的规范和验收焊接工艺试验第2部分：铝及其合金的电弧焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000) |
| prEN ISO 15614-5-2003 |
金属焊接工艺的规范和验收焊接工艺试验第5部分：钛、锆及其合金的电弧焊 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003) |
| prEN ISO 15614-9-2000 |
金属焊接工艺的规范和验收焊接工艺试验第9部分：水下超基湿焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 9: Underwater hyperbasic wet welding (ISO/DIS 15614-9:2000) |
| prEN ISO 15680-2003 |
水质某些单环芳烃、萘和氯化化合物的测定使用清除收集和热解吸的气相色谱法 |
Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO/FDIS 15680:2003) |
| prEN ISO 15749-1-2001 |
船舶和造船技术船和海上构筑物上排水系统第1部分：生活污水排水系统的设计 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design (ISO/DIS 15749-1:2001) |
| prEN ISO 15749-2-2001 |
船舶和造船技术船和海上构筑物上排水系统第2部分：生活污水排水、排水管道的自流系统 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO/DIS 15749-2:2001) |
| prEN ISO 15749-3-2001 |
船舶和造船技术船和海上构筑物上排水系统第3部分：生活污水排水、排水管的真空抽吸系统 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO/DIS 15749-3:2001) |
| prEN ISO 15749-4-2001 |
船舶和造船技术船和海上构筑物上排水系统第4部分：生活污水排水、污物处理排出管道 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO/DIS 15749-4:2001) |
| prEN ISO 15749-5-2001 |
船舶和造船技术船和海上构筑物上排水系统第5部分：甲板、货仓及游泳池的排水 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo holds and swimmming pools (ISO/DIS 15749-5:2001) |
| prEN ISO 15751-2000 |
眼科光学眼科仪的数据传输交换 |
Ophthalmic optics - Data transmission interchange for ophthalmic instruments (ISO/DIS 15751:2000) |
| prEN ISO 15788-2-2002 |
动植物脂肪和油植物油中豆甾二烯的测定第2部分：高效液相色谱法 |
Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography (HPLC) (ISO/FDIS 15788-2:2002) |
| prEN ISO 15831-2001 |
服装生理效果用热人体模型法测量隔热性 |
Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO/DIS 15831:2001) |
| prEN ISO 15874-1-2002 |
冷热水用塑料管道系统聚乙烯（PE）第1部分：总则 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO/FDIS 15874-1:2002) |
| prEN ISO 15874-2-2002 |
冷热水用塑料管道系统聚丙烯（PP）第2部分：管道 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO/FDIS 15874-2:2002) |
| prEN ISO 15874-3-2002 |
冷热水用塑料管道系统聚丙烯（PP）第3部分：配件 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO/FDIS 15874-3:2002) |
| prEN ISO 15874-5-2002 |
冷热水用塑料管道系统聚丙烯（PP）第5部分：系统目的的适配性 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO/FDIS 15874-5:2002) |
| prEN ISO 15875-1-2002 |
冷热水塑料管道系统交联聚乙稀（ PE - X ）第1部分：总则 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO/FDIS 15875-1:2002) |
| prEN ISO 15875-2-2002 |
冷热水塑料管道系统交联聚乙稀（ PE - X ）第2部分：管道 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO/FDIS 15875-2:2002) |
| prEN ISO 15875-3-2002 |
冷热水塑料管道系统交联聚乙稀（ PE - X ）第3部分：接头 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO/FDIS 15875-3:2002) |
| prEN ISO 15875-5-2002 |
冷热水塑料管道系统交联聚乙稀（ PE - X ）第5部分：系统适用性 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO/FDIS 15875-5:2002) |
| prEN ISO 15876-1-2002 |
冷热水塑料管道系统聚丁稀（ PB ）第1部分：总则 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO/FDIS 15876-1:2002) |
| prEN ISO 15876-2-2002 |
冷热水塑料管道系统聚丁稀（ PB ）第2部分：管道 |
Plastics piping systems for hot and cold water installations - Polybutylen (PB) - Part 2: Pipes (ISO/FDIS 15876-2:2002) |
| prEN ISO 15876-3-2002 |
冷热水塑料管道系统聚丁稀（ PB ）第3部分：接头 |
Plastics piping systems for hot and cold water installations - Polybutylen (PB) - Part 3: Fittings (ISO/FDIS 15876-3:2002) |
| prEN ISO 15876-5-2002 |
冷热水塑料管道系统聚丁稀（ PB ）第5部分：系统适用性 |
Plastics piping systems for hot and cold water installations - Polybutylen (PB) - Part 5: Fittness for purpose of the system (ISO/FDIS 15876-5:2002) |
| prEN ISO 15877-1-2002 |
冷热水用塑料管道系统氯化聚氯乙烯（PVC-C）第1部分：总则 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO/FDIS 15877-1:2002) |
| prEN ISO 15877-2-2002 |
冷热水用塑料管道系统氯化聚氯乙烯（PVC-C）第2部分：管道 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO/FDIS 15877-2:2002) |
| prEN ISO 15877-3-2002 |
冷热水用塑料管道系统氯化聚氯乙烯（PVC-C）第3部分：接头 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO/FDIS 15877-3:2002) |
| prEN ISO 15877-5-2002 |
冷热水用塑料管道系统氯化聚氯乙烯（PVC-C）第5部分：系统用途的适合性 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO/FDIS 15877-5:2002) |
| prEN ISO 15883-1-2003 |
洗涤器消毒器第1部分：一般要求、定义和试验 |
Washer-disinfectors - Part 1: General requirements, definitions and tests (ISO/DIS 15883-1:2003) |
| prEN ISO 15883-3-2003 |
洗涤器消毒器第3部分：人类废弃物容器清洗消毒器的要求和试验 |
Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO/DIS 15883-3:2003) |
| prEN ISO 15927-1-2002 |
建筑物的湿热性能气候数据第1部分：单个气象要素的月平均值 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO/FDIS 15927-1:2002) |
| prEN ISO 15927-4-2003 |
建筑物的湿热性能气候数据第4部分：评估冷却与加热系统年能耗的资料 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Data for assessing the annual energy for heating and cooling (ISO/DIS 15927-4:2003) |
| prEN ISO 15927-5-2002 |
建筑物的湿热性能气候数据的计算与表示第5部分：冬季室外设计气温及相关风的数据 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Winter external design air temperatures and related wind data (ISO/DIS 15927-5:2002) |
| prEN ISO 16032-2000 |
声学建筑物中辅助设备的声压级测量工程法 |
Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO/DIS 16032:2000) |
| prEN ISO 16101-1999 |
包装危险货物的运输包装塑料紧密性试验 |
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO/DIS 16101:1999) |
| prEN ISO 16135-2001 |
工业用阀门热塑性材料制球阀 |
Industrial valves - Ball valves of thermoplastic materials (ISO/DIS 16135:2001) |
| prEN ISO 16136-2001 |
工业用阀门热塑性材料制蝶阀 |
Industrial valves - Butterfly valves of thermoplastic materials (ISO/DIS 16136:2001) |
| prEN ISO 16137-2001 |
工业用阀门热塑性材料制防逆阀 |
Industrial valves - Check valves of thermoplastic materials (ISO/DIS 16137:2001) |
| prEN ISO 16138-2001 |
工业用阀门热塑性材料制隔膜阀 |
Industrial valves - Diaphragm valves of thermoplastic materials (ISO/DIS 16138:2001) |
| prEN ISO 16139-2000 |
工业用阀门热塑性材料制闸阀 |
Industrial valves - Gate valves for thermoplastic materials (ISO/DIS 16139:2000) |
| prEN ISO 16148-2002 |
气瓶可反复充气的无缝钢气瓶用声发射试验进行周期性检查 |
Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing for periodic inspection (ISO/DIS 16148:2002) / Note: Endorsement notice |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com