标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 12115-1997 |
纤维增强塑料.热固性模塑化合物和聚酯胶片.流动性,熟化和使用寿命的测定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997) |
| DIN EN ISO 12138-1997 |
纺织材料.作易燃性试验前纺织纤维的家用洗涤方法 |
(Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996); German version EN ISO 12138:1996) |
| DIN EN ISO 12162-1996 |
压力管道和配件用热塑性塑料.分类和材料标识.整体载荷(计算)系数 |
(Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995) |
| DIN EN ISO 12163-2000 |
牙科基盘/制模蜡 |
(Dental baseplate/modelling wax (ISO 12163:1999); German version EN ISO 12163:2000) |
| DIN EN ISO 12179-2000 |
几何产品规范(GPS).表面特征:外形法.接触(针式)仪器的校准 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000) |
| DIN EN ISO 12185-1997 |
原油和石油产品.密度测定.振荡U形管法 |
(Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996) |
| DIN EN ISO 12193-1999 |
动物和植物的油和脂肪.铅含量的测定.石墨炉-原子吸收法 |
(Animal and vegetable fats and oils - Determination of lead content - Graphite furnace atomic absorption method (ISO 12193:1994); German version EN ISO 12193:1999) |
| DIN EN ISO 12193-2004 |
动植物油脂.用直接石墨炉原子吸收光谱法测定铅含量 |
|
| DIN EN ISO 12205-1996 |
石油产品.柴油燃料氧化稳定性的测定 |
(Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995); German version EN ISO 12205:1996) |
| DIN EN ISO 12209-1-2001 |
储气瓶.压缩吸气用储气瓶阀门的出口连接件.第1部分:轭式连接件 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000) |
| DIN EN ISO 12209-2-2001 |
储气瓶.压缩吸气用储气瓶阀门的出口连接件.第2部分:螺纹连接件 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); German version EN ISO 12209-2:2000) |
| DIN EN ISO 12209-3-2001 |
储气瓶.压缩吸气用储气瓶阀门的出口连接件.第2部分:230bar阀门的适配器 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); German version EN ISO 12209-3:2000) |
| DIN EN ISO 12213-1-2005 |
天然气.压缩因子的计算.第1部分:说明和指南 |
|
| DIN EN ISO 12213-2-2005 |
天然气.压缩因子的计算.第2部分:摩尔代数运算分析 |
|
| DIN EN ISO 12213-3-2005 |
天然气.压缩因子的计算.第3部分:用物理特性计算 |
|
| DIN EN ISO 12215-1-2001 |
小型船舶.传体建筑和草图.第1部分:材料.热固树脂玻璃纤维增强的标准叠层板材 |
(Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000) |
| DIN EN ISO 12215-2-2002 |
小型船舶.船体结构和船材尺寸.第2部分:材料:夹层结构用心材料,嵌入材料 |
(Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002); German version EN ISO 12215-2:2002) |
| DIN EN ISO 12215-3-2002 |
小型船舶.船体结构和船材尺寸.第3部分:材料:钢,铝合金,木料及其它材料 |
(Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002); German version EN ISO 12215-3:2002) |
| DIN EN ISO 12215-4-2002 |
小型船舶.船体结构和船材尺寸.第4部分:车间和制造工厂 |
(Small craft - Hull construction and scantlings - Part 4: Workshops and manufacturing (ISO 12215-4:2002); German version EN ISO 12215-4:2002) |
| DIN EN ISO 12216-2002 |
小型船舶.窗户、船灯、舱口、舷窗盖和门.强度和防水性要求 |
(Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002); German version EN ISO 12216:2002) |
| DIN EN ISO 12217-1-2002 |
小型船舶.稳定性和浮力评估和分类.第1部分:船体大于或等于6米的无帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002), German version EN ISO 12217-1:2002) |
| DIN EN ISO 12217-2-2002 |
小型船舶.稳定性和浮力评估和分类.第2部分:船体大于或等于6米的带帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002); German version EN ISO 12217-2:2002) |
| DIN EN ISO 12224-1-1998 |
助熔填充焊丝和实心焊条.规范和试验方法.第1部分:分类和性能要求 |
(Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997); German version EN ISO 12224-1:1998) |
| DIN EN ISO 12224-2-1999 |
填充焊剂的焊条.规定和检验方法.第2部分:焊剂含量的测定 |
(Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997); German version EN ISO 12224-2:1999) |
| DIN EN ISO 12228-1999 |
动物和植物的油和脂肪.分别的和总的甾醇含量的测定.气相色谱法 |
(Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999); German version EN ISO 12228:1999) |
| DIN EN ISO 12236-1996 |
建筑用纺织品及其相关产品.压印印透试验(CBR-试验) |
(Geotextiles and geotextile-related products - Static puncture test (CBR-Test) (ISO 12236:1996); German version EN ISO 12236:1996) |
| DIN EN ISO 12241-1998 |
建筑设备和工业装置的热绝缘.计算规则 |
(Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998); German version EN ISO 12241:1998) |
| DIN EN ISO 1234-1998 |
开口销 |
(Split pins (ISO 1234:1997); German version EN ISO 1234:1997) |
| DIN EN ISO 12402-1-2005 |
个人漂浮设施.第1部分:海上行船用救生衣.安全要求 (ISO 12402-1-2005); 德文版本 EN ISO 12402-1-2005 |
|
| DIN EN ISO 12543-1-1998 |
建筑业中的玻璃.复合玻璃和复合安全玻璃.第1部分:成份的定义和说明 |
(Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998); German version EN ISO 12543-1:1998) |
| DIN EN ISO 12543-2-1998 |
建筑业中的玻璃.复合玻璃和复合安全玻璃.第2部分:复合安全玻璃 |
(Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998); German version EN ISO 12543-2:1998) |
| DIN EN ISO 12543-3-1998 |
建筑业中的玻璃.复合玻璃和复合安全玻璃.第3部分:复合玻璃 |
(Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998); German version EN ISO 12543-3:1998) |
| DIN EN ISO 12543-4-1998 |
建筑业中的玻璃.复合玻璃和复合安全玻璃.第4部分:耐抗性检验的方法 |
(Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998); German version EN ISO 12543-4:1998) |
| DIN EN ISO 12543-5-1998 |
建筑业中的玻璃.复合玻璃和复合安全玻璃.第5部分:尺寸和边角加工 |
(Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998); German version EN ISO 12543-5:1998) |
| DIN EN ISO 12543-6-1998 |
建筑业中的玻璃.复合玻璃和复合安全玻璃.第6部分:外观 |
(Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998); German version EN ISO 12543-6:1998) |
| DIN EN ISO 12567-1-2001 |
门窗热性能.用热箱法测定热传递系数.第1部分:成套门窗 |
(Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1: Complete windows and doors (ISO 12567-1:2000); German version EN ISO 12567-1:2000) |
| DIN EN ISO 12569-2001 |
建筑物的热性能.建筑物中空气变化的测定.示踪气体稀释法 |
(Thermal performance of buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000); German version EN ISO 12569:2000) |
| DIN EN ISO 12570-2000 |
建筑材料和产品的温湿性能.高温下干燥法测定含水量 |
(Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000); German version EN ISO 12570:2000) |
| DIN EN ISO 12571-2000 |
建筑材料和产品的温湿性能.吸湿性能的测定 |
(Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000); German version EN ISO 12571:2000) |
| DIN EN ISO 12572-2001 |
建筑材料和产品的冷热性能.水蒸气传输性能的测定 |
(Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001); German version EN ISO 12572:2001) |
| DIN EN ISO 12625-6-2005 |
薄页纸和薄纸产品.第6部分:克数测定 |
|
| DIN EN ISO 12625-6-2005 |
薄页纸和薄纸产品.第6部分:克数测定 |
|
| DIN EN ISO 1264-1997 |
塑料.氯乙烯的均聚物和共聚物树脂.水萃物的pH值测定 |
(Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980); German version EN ISO 1264:1997) |
| DIN EN ISO 1265-1997 |
塑料.聚氯乙烯树脂.杂质和外来杂质数的测定 |
(Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles (ISO 1265:1979); German version EN ISO 1265:1997) |
| DIN EN ISO 12676-2003 |
耐熔制品.耐一氧化碳的测定 |
(Refractory products - Determination of resistance to carbon monoxide (ISO 12676:2000); German version EN ISO 12676:2003) |
| DIN EN ISO 12677-2003 |
用XRF法对耐火产品进行化学分析.熔铸法 |
(Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003); German version EN ISO 12677:2003) |
| DIN EN ISO 12683-2005 |
机械镀锌涂层.规范和试验方法 |
|
| DIN EN ISO 12687-1998 |
金属涂层.孔隙率试验.湿硫(硫华)试验 |
(Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996); German version EN ISO 12687:1998) |
| DIN EN ISO 12706-2001 |
无损检验.术语.第6部分:渗透性检验用术语 |
(Non-destructive testing - Terminology - Part 6: Terms used in penetrant testing (ISO 12706:2000); Trilingual version EN ISO 12706:2000) |
| DIN EN ISO 12737-1999 |
金属材料.断裂韧性的测定(平面延伸状态) |
(Metallic materials - Determination of the plane-strain fracture toughness (ISO 12737:1996); German version EN ISO 12737:1999) |
| DIN EN ISO 12737-2005 |
金属材料.平面变形断裂韧性的测定 |
|
| DIN EN ISO 12777-1-1996 |
托盘连接件的检验方法.第1部分:托盘用钉子,其它榫钉型紧固件和U形钉的抗弯曲的测定 |
(Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994); German version EN ISO 12777-1:1996) |
| DIN EN ISO 12777-2-2000 |
托盘连接件的检验方法.第2部分:托盘钉子和U型钉钉头拔出抗性和退回的测定 |
(Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000); German Version EN ISO 12777-2:2000) |
| DIN EN ISO 12777-3-2003 |
托盘连接件的检验方法.第3部分:托盘连接件的强度测定 |
(Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002); German version EN ISO 12777-3:2002) |
| DIN EN ISO 128-20-2002 |
技术制图.画法的一般原则.第20部分:图线的惯例 |
(Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996); German version EN ISO 128-20:2001) |
| DIN EN ISO 128-21-2002 |
技术制图.画法的一般原则.第21部分:计算机辅助设计(CAD)系统用图线的表示 |
(Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD-systems (ISO 128-21:1997); German version EN ISO 128-21:2001) |
| DIN EN ISO 12864-1998 |
眼科光学.接触镜片.散射光的测定 |
(Ophthalmic optics - Contact lenses - Determination of scattered light (ISO 12864:1997); German version EN ISO 12864:1997) |
| DIN EN ISO 12865-1998 |
眼科器械.检影法 |
(Ophthalmic instruments - Retinoscopes (ISO 12865:1998); German version EN ISO 12865:1998) |
| DIN EN ISO 12866-2000 |
眼科设备.视野计 |
(Ophthalmic instruments - Perimeters (ISO 12866:1999, including Corrigendum); German version EN ISO 12866:1999 + AC:2000) |
| DIN EN ISO 12867-1998 |
眼科器械.屈光镜 |
(Ophthalmic instruments - Trial frames (ISO 12867:1998); German version EN ISO 12867:1998) |
| DIN EN ISO 12870-1998 |
眼镜科学.眼镜框.一般要求和试验方法 |
(Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997); German version EN ISO 12870:1997) |
| DIN EN ISO 12870-2004 |
眼科光学.眼镜架.要求和试验方法 |
|
| DIN EN ISO 12894-2002 |
热环境人类工效学.暴露于极热和冷环境中的人的医学监验 |
(Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001); German version EN ISO 12894:2001) |
| DIN EN ISO 12922-2002 |
润滑剂、工业用油和相关产品(L级).H类(液压体系).目录HFAE、HFAS、HFB、HFC、HFDR和HFDU的规范 |
(Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002) |
| DIN EN ISO 12937-2002 |
石油产品.水含量测定.库仑卡耳.费歇尔滴定法 |
(Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000); German version EN ISO 12937:2000) |
| DIN EN ISO 12944-1-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第1部分:一般性介绍 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998); German version EN ISO 12944-1:1998) |
| DIN EN ISO 12944-2-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第2部分:环境分类 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998); German version EN ISO 12944-2:1998) |
| DIN EN ISO 12944-3-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第3部分:设计的基本原理 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998); German version EN ISO 12944-3:1998) |
| DIN EN ISO 12944-5-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第5部分:涂层系统 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998); German version EN ISO 12944-5:1998) |
| DIN EN ISO 12944-6-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第6部分:评定涂层系统的实验室试验 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test (ISO 12944-6:1998); German version EN ISO 12944-6:1998) |
| DIN EN ISO 12944-7-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第7部分:涂层工作的实施和监督 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998); German version EN ISO 12944-7:1998) |
| DIN EN ISO 12944-8-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第8部分:新工作和维修用规范的开发 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998); German version EN ISO 12944-8:1998) |
| DIN EN ISO 12945-1-2001 |
纺织品.测定织物表面起毛和起球的倾向.第1部分:起球箱法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000); German version EN ISO 12945-1:2000) |
| DIN EN ISO 12945-2-2000 |
织物.以表面起毛起球试验测定织物孔隙度.第2部分:改进的马丁代尔法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000); German version EN ISO 12945-2:2000) |
| DIN EN ISO 12947-1-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第1部分:马丁代尔磨损试验机 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998); Version allemande EN ISO 12947-1:1998) |
| DIN EN ISO 12947-2-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第2部分:试样损坏测定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998); German version EN ISO 12947-2:1998) |
| DIN EN ISO 12947-3-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第3部分:质量损失测定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998); German version EN ISO 12947-3:1998) |
| DIN EN ISO 12947-4-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第4部分:表面变化的评定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998); German version EN ISO 12947-4:1998) |
| DIN EN ISO 12952-1-1999 |
纺织物.床单的燃烧性能.第1部分:用一只点燃的香烟检验易燃性的一般试验方法 |
(Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998); German version EN ISO 12952-1:1998) |
| DIN EN ISO 12952-2-1999 |
纺织物.床单的燃烧性能.第2部分:用一只点燃的香烟检验易燃性的特殊试验方法 |
(Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998); German version EN ISO 12952-2:1998) |
| DIN EN ISO 12952-3-1999 |
纺织物.床单的燃烧性能.第3部分:用小的敞开的火焰检验易燃性的一般试验方法 |
(Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998); German version EN ISO 12952-3:1998) |
| DIN EN ISO 12952-4-1999 |
纺织物.床单的燃烧性能.第4部分:用小的敞开的火焰进行的可燃性特殊检验方法 |
(Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998); German version EN ISO 12952-4:1998) |
| DIN EN ISO 12956-1999 |
土工和土工相关产品.特性化开口尺寸的测定 |
(Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999); German version EN ISO 12956:1999) |
| DIN EN ISO 12957-1-2005 |
土工合成织物.摩擦特性的测定.第1部分:直接剪切试验 |
|
| DIN EN ISO 12957-1-2005 |
土工合成织物.摩擦特性的测定.第1部分:直接剪切试验 |
|
| DIN EN ISO 12957-2-2005 |
土工合成织物.摩擦特性的测定.第2部分:倾斜面试验 |
|
| DIN EN ISO 12957-2-2005 |
土工合成织物.摩擦特性的测定.第2部分:倾斜面试验 |
|
| DIN EN ISO 12958-1999 |
土工和土工相关产品.平面水流容量的测定 |
(Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999); German version EN ISO 12958:1999) |
| DIN EN ISO 13000-1-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和设计 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997); German version EN ISO 13000-1:1997) |
| DIN EN ISO 13000-2-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997); German version EN ISO 13000-2:1997) |
| DIN EN ISO 13002-1999 |
碳纤维.长丝纱命名体制 |
(Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998) |
| DIN EN ISO 1302-2002 |
产品几何量技术规范.在技术产品文件中表面结构的表示 |
(Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002) |
| DIN EN ISO 1307-1996 |
工业通用橡胶和塑料软管.内径和长度公差 |
(Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995) |
| DIN EN ISO 13090-1-1998 |
机械振动和冲击.试验及与人有关的实验安全性指南.第1部分:机械整体振动和反复冲击的影响 |
(Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998) |
| DIN EN ISO 13212-1999 |
眼科光学.接触镜片保护产品.储藏寿命的测定导则 |
(Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO 13212:1999); German version EN ISO 13212:1999) |
| DIN EN ISO 13230-1999 |
眼科光学.条形码规范 |
(Ophthalmic optics - Bar code specifications (ISO 13230:1999); German version EN ISO 13230:1999) |
| DIN EN ISO 13294-1997 |
牙钻手柄.牙钻气动机 |
(Dental handpieces - Dental air-motors (ISO 13294:1997); German version EN ISO 13294:1997) |
| DIN EN ISO 13295-1996 |
牙科旋切器.心轴 |
(Dental rotary instruments - Mandrels (ISO 13295:1994); German version EN ISO 13295:1996) |
| DIN EN ISO 13297-2001 |
小型船舶.电气系统.交流电设备 |
(Small craft - Electrical systems - Alternating current installations (ISO 13297:2000); German version EN ISO 13297:2000) |
| DIN EN ISO 13337-1998 |
开缝,轻型结构的夹紧销(夹紧筒). |
(Spring-type straight pins, slotted, light duty (ISO 13337:1997); German version EN ISO 13337:1997) |
| DIN EN ISO 13340-2001 |
可运输气瓶.不可再充填的气瓶用阀门.规范和原型试验 |
(Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); German version EN ISO 13340:2001) |
| DIN EN ISO 13341-1998 |
可运输储气瓶.阀门和气瓶间的连接 |
(Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997)(including corrigendum AC); German version EN ISO 13341:1997 + AC:1998) |
| DIN EN ISO 13366-1-1997 |
乳.体细胞的计数.第1部分:显微法(参照法) |
(Milk - Enumeration of somatic cells - Part 1: Microscopic method (Reference method) (ISO 13366-1:1997); German version EN ISO 13366-1:1997) |
| DIN EN ISO 13366-2-1997 |
乳.体细胞的计数.第2部分:电子粒子计数法 |
(Milk - Enumeration of somatic cells - Part 2: Electronic particle counter method (ISO 13366-2:1997); German version EN ISO 13366-2:1997) |
| DIN EN ISO 13366-3-1997 |
乳.体细胞的计数.第3部分:荧光光电法 |
(Milk - Enumeration of somatic cells - Part 3: Fluoro-opto-electronic method (ISO 13366-3:1997); German version EN ISO 13366-3:1997) |
| DIN EN ISO 13370-1998 |
建筑物的热性能.经由地面的热传递.计算方法 |
(Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998); German version EN ISO 13370:1998) |
| DIN EN ISO 13395-1996 |
水质.用流量分析法和光谱检出法测定亚硝酸氮和硝酸氮及两者的总含量(CFA和FIA). |
(Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996); German version EN ISO 13395:1996) |
| DIN EN ISO 13397-1-1996 |
牙周刮匙,牙刮除器和牙钻孔器.第1部分:一般要求 |
(Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995); German version EN ISO 13397-1:1995) |
| DIN EN ISO 13397-2 Berichtigung 1-2000 |
对DINENISO13397-2:1996-11的勘误 |
(Corrigenda to DIN EN ISO 13397-2:1996-11) |
| DIN EN ISO 13397-2-1996 |
牙周刮匙、牙科用刮除器和牙钻孔器.第2部分:牙周刮匙.Gr型 |
(Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes - Gr-type (ISO 13397-2:1996); German version EN ISO 13397-2:1996) |
| DIN EN ISO 13397-2-2005 |
牙科学.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙 |
|
| DIN EN ISO 13397-3-1996 |
牙周刮匙,牙科刮除器和牙钻孔器.第3部分:牙科用刮除器.H型 |
(Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996); German version EN ISO 13397-3:1996) |
| DIN EN ISO 13397-4-1998 |
牙周刮匙,牙科刮除器和牙钻孔器.第4部分:圆形牙钻孔器 |
(Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators, discoid-type (ISO 13397-4:1997); German version EN ISO 13397-4:1997) |
| DIN EN ISO 13402-2001 |
外科和牙科手动设备.测定耐热压蒸、腐蚀和热曝性 |
(Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000) |
| DIN EN ISO 13406-1-2000 |
平板式视觉显示工作的人类工效学要求.第1部分:介绍 |
(Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999); German version EN ISO 13406-1:1999) |
| DIN EN ISO 13407-2000 |
交互系统以人为中心的设计过程 |
(Human-centred design processes for interactive systems (ISO 13407:1999); German version EN ISO 13407:1999) |
| DIN EN ISO 13426-1-2003 |
土工织物及其有关产品.内部结构连接强度.第1部分:土工网眼 |
(Geotextiles and geotexile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003); German version EN ISO 13426-1:2003) |
| DIN EN ISO 13427-1998 |
土工织物及其相关制品.磨损模拟(滑块试验) |
(Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998) |
| DIN EN ISO 13428-2005 |
土工合成织物.土工合成织物防冲击损坏保护效果的测定 |
|
| DIN EN ISO 13428-2005 |
土工合成织物.土工合成织物防冲击损坏保护效果的测定 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com