标准号 |
中文名称 |
英文名称 |
BS EN ISO 7518-1999 |
建筑制图.拆除和重建的简化表示法 |
(Construction drawings - Simplified representation of demolition and rebuilding) |
BS EN ISO 7519-1997 |
技术制图.建筑制图.总体布置图和构件图表示法的一般原理 |
(Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings) |
BS EN ISO 7536-1996 |
石油及其产品的试验方法.石油产品.汽油耐氧化性测定.诱导期方法 |
(Methods of test for petroleum and its products - Petroleum products - Determination of oxidation stability of gasoline - Induction period method) |
BS EN ISO 7539-1-1988 |
金属和合金的腐蚀.腐蚀应力试验.第1部分:试验程序的通用指南 |
(Corrosion of metals and alloys - Stress corrosion testing - General guidance on testing procedures) |
BS EN ISO 7539-2-1990 |
金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of bent-beam specimens) |
BS EN ISO 7539-3-1990 |
金属和合金的耐腐蚀性.应力腐蚀试验.第3部分:U型弯曲试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of U-bend specimens) |
BS EN ISO 7539-4-1990 |
金属和合金的腐蚀.应力腐蚀试验.第4部分:单向载荷拉伸试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of uniaxially loaded tension specimens) |
BS EN ISO 7539-5-1990 |
金属和合金的腐蚀.应力腐蚀试验.第5部分:C-环形试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Method for the preparation and use of C-ring specimens) |
BS EN ISO 7539-6-2003 |
金属和合金的腐蚀.应力腐蚀试验.恒定负荷或恒定位移条件下试验用预破裂试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under constant load or constant displacement) |
BS EN ISO 7539-7-1990 |
金属和合金的腐蚀.应力腐蚀试验.第7部分:慢速应变率试验 |
(Corrosion of metals and alloys - Stress corrosion testing - Slow strain rate testing) |
BS EN ISO 7539-7-2005 |
金属与合金的腐蚀.应力腐蚀试验.慢速率应力试验方法 |
|
BS EN ISO 7551-1997 |
牙科吸收点 |
(Dental absorbent points) |
BS EN ISO 7579-1991 |
染料.有机溶剂中染料溶解度的测定.重力仪法 |
(Dyestuffs - Determination of solubility of dyestuffs in organic solvents - Gravimetric method) |
BS EN ISO 7590-2001 |
钢丝输送带.总厚度和覆层厚度的测量方法 |
(Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness) |
BS EN ISO 7622-1-1996 |
钢丝芯线输送机皮带.纵向牵引试验.第1部分:伸长的测量 |
(Steel cord conveyor belts - Longitudinal traction test - Measurement of elongation) |
BS EN ISO 7622-2-1996 |
钢丝芯线输送机皮带.纵向牵引试验.第2部分:抗拉强度的测量 |
(Steel cord conveyor belts - Longitudinal traction test - Measurement of tensile strength) |
BS EN ISO 7623-1996 |
钢丝芯线输送机皮带.缆索涂层粘合力试验.最初试验和后期处理 |
(Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment) |
BS EN ISO 7662-1996 |
橡胶和塑料软管.内衬磨损的测定 |
(Rubber and plastics hoses - Determination of abrasion of lining) |
BS EN ISO 7711-1-1998 |
牙科用旋转器械.金刚钻器具.尺寸、要求、作标记和包装 |
(Dental rotary instruments - Diamond instruments - Dimensions, requirements, marking and packaging) |
BS EN ISO 7711-2-1993 |
牙科用旋转器械.金刚钻器具.第2部分:圆盘刀 |
(Dental rotary instruments - Diamond instruments - Discs) |
BS EN ISO 7711-3-1993 |
牙科用旋转器械.金刚钻器具.磨粒尺寸、名称与符号和色码 |
(Dental rotary instruments - Diamond instruments - Grit sizes, designation and colour code) |
BS EN ISO 7711-3-2005 |
牙科学.金刚石旋转器械.磨粒尺寸、标注与彩色编码 |
|
BS EN ISO 7711-3-2005 |
牙科学.金刚石旋转器械.磨粒尺寸、标注与彩色编码 |
|
BS EN ISO 7719-1998 |
扭矩型全金属六角螺母.1型:5,8和10级特性 |
(Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10) |
BS EN ISO 772-2001 |
流体比重测定.词汇和符号 |
(Hydrometric determinations - Vocabulary and symbols) |
BS EN ISO 7721-2-1995 |
埋头螺钉.十字凹头深度 |
(Countersunk flat head screws - Penetration depth of cross recesses) |
BS EN ISO 7726-2001 |
热环境的人类工效学.物理量测量仪器 |
(Ergonomics of the thermal environment - Instruments for measuring physical quantities) |
BS EN ISO 7730-1995 |
适度的热环境.PMV和PPD指标的测定.合适的热条件规范 |
(Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort) |
BS EN ISO 7751-1997 |
橡胶和塑料软管和软管组件.试验压力和爆破压力与设计工作压力的比值 |
(Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure) |
BS EN ISO 7779-2001 |
声学.信息技术设备和电信设备发出的空气噪声的测量 |
(Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment) |
BS EN ISO 7783-2-1999 |
涂料和清漆.外部砖石工程和混凝土用涂覆材料和涂覆系统.水蒸气渗透率的测定和分类 |
(Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Determination and classification of water-vapour transmission rate (permeability)) |
BS EN ISO 7785-1-1999 |
手持式牙科器械.高速空气涡轮钻头 |
(Dental handpieces - High-speed air turbine handpieces) |
BS EN ISO 7785-2-1998 |
牙钻手柄.直的和齿角型牙钻手柄 |
(Dental handpieces - Straight and geared angle handpieces) |
BS EN ISO 7786-2001 |
牙科用旋转器械.实验室研磨器械 |
(Dental rotary instruments - Laboratory abrasive instruments) |
BS EN ISO 7787-2-2001 |
牙科旋转器械.切刀.实验室用硬质合金切刀 |
(Dental rotary instruments - Cutters - Carbide laboratory cutters) |
BS EN ISO 7787-4-2002 |
牙科用旋转器械.切割刀具.实验室用小型硬质合金刀具 |
(Dental rotary instruments - Cutters - Miniature carbide laboratory cutters) |
BS EN ISO 7799-2000 |
金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验 |
(Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test) |
BS EN ISO 780-1999 |
包装.货物搬运的图形标志 |
(Packaging - Pictorial marking for handling of goods) |
BS EN ISO 7822-1999 |
纺织玻璃纤维增强塑料.空隙量测定.灼烧损失、机械粉碎和统计计数法 |
(Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods) |
BS EN ISO 7823-1-2003 |
塑料.聚甲基丙烯酸甲酯板材.类型、尺寸和特性.浇注薄板材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Cast sheets) |
BS EN ISO 7823-2-2003 |
塑料.聚甲基丙烯酸甲酯板材.类型、尺寸和特性.挤塑片材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Extruded sheets) |
BS EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯板材.类型、尺寸和特性.连续浇注薄板材 |
|
BS EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯板材.类型、尺寸和特性.连续浇注薄板材 |
|
BS EN ISO 7827-1996 |
水的质量.对有机化合物含水介质估值,溶解有机碳(DOC)的分析法 |
(Water quality - Evaluation in an aqueous medium of the ’ultimate’ aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC)) |
BS EN ISO 7840-1995 |
小型船舶.抗燃烧燃料软管 |
(Small craft - Fire resistant fuel hoses) |
BS EN ISO 7840-2004 |
小艇.耐火燃油软管 |
|
BS EN ISO 7854-1996 |
橡胶或塑料涂覆织物.耐折曲损坏性的测定(动态法) |
(Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing) |
BS EN ISO 7864-1993 |
一次性使用无菌皮下注射针头 |
(Sterile hypodermic needles for single use) |
BS EN ISO 787-10-1993 |
颜料和填充剂的一般试验方法.第10部分:密度的测定.比重瓶法 |
(General methods of test for pigments and extenders - Determination of density - Pyknometer method) |
BS EN ISO 787-11-1982 |
颜料和填充剂的一般试验方法.压实后压实容积和表观密度的测定 |
(General methods of test for pigments and extenders - Determination of tamped volume and apparent density after tamping) |
BS EN ISO 787-13-2002 |
颜料和体质颜料的通用试验方法.测定水溶性硫酸盐、氯化物和硝酸盐 |
(General methods of test for pigments and extenders - Determination of water-soluble sulfates, chlorides and nitrates) |
BS EN ISO 787-14-2002 |
颜料和体质颜料的通用试验方法.测定水萃取物电阻率 |
(General methods of test for pigments and extenders - Determination of resistivity of aqueous extract) |
BS EN ISO 787-15-1988 |
颜料和填充剂的一般试验方法.同类着色颜料耐光性的比较 |
(General methods of test for pigments and extenders - Comparison of resistance to light of coloured pigments of similar types) |
BS EN ISO 787-16-1988 |
颜料和填充剂的一般试验方法.相对着色力(或等效着色值)和着色颜料还原后的颜色的测定.目视比较法 |
(General methods of test for pigments and extenders - Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method) |
BS EN ISO 787-18-1995 |
颜料和填充剂的一般试验方法.第18部分:筛渣的测定.机械冲洗步骤 |
(General methods of test for pigments and extenders - Determination of residue on sieve - Mechanical flushing procedure) |
BS EN ISO 787-19-1995 |
颜料和填充剂的一般试验方法.水溶性硝酸盐的测定(水杨酸法) |
(General methods of test for pigments and extenders - Determination of water-soluble nitrates (Salicylic acid method)) |
BS EN ISO 787-1995 |
颜料的一般试验方法.第19部分:水溶性硝酸盐的测定(水杨酸法) |
(General methods of test for pigments and extenders. Determination of water-soluble nitrates (Salicylic acid method)) |
BS EN ISO 787-2-1982 |
颜料和填充剂的一般试验方法.105 ℃时挥发物的测定 |
(General methods of test for pigments and extenders - Determination of matter volatile at 105 鳦) |
BS EN ISO 787-23-1980 |
颜料和填充剂的一般试验方法.第23部分:密度的测定(用离心机消除夹带的空气) |
(General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air)) |
BS EN ISO 787-24-1988 |
颜料和填充剂的一般试验方法.第24部分:着色颜料的相对着色力和白色颜料的相对散射力的测定.光度法 |
(General methods of test for pigments and extenders - Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods) |
BS EN ISO 787-3-2001 |
颜料和填充剂的一般试验方法.水溶物的测定.热萃取法 |
General methods of test for pigments and extenders - Determination of matter soluble in water - Hot extraction method |
BS EN ISO 787-5-1982 |
颜料和填充剂的一般试验方法.第5部分:吸油值的测定 |
(General methods of test for pigments and extenders - Determination of oil absorption value) |
BS EN ISO 787-8-2001 |
颜料和填充剂的一般试验方法.水溶物的测定.冷萃取法 |
(General methods of test for pigments and extenders - Determination of matter soluble in water - Cold extraction method) |
BS EN ISO 787-9-1982 |
颜料和填充剂的一般试验方法.第9部分:水悬浮液pH值的测定 |
(General methods of test for pigments and extenders - Determination of pH value of aqueous suspension) |
BS EN ISO 7885-2001 |
无菌、一次性牙科用注射针头 |
(Sterile dental injection needles for single use) |
BS EN ISO 7886-1-1997 |
一次性使用无菌皮下注射器.第1部分:人工注射器 |
(Sterile hypodermic syringes for single use - Syringes for manual use) |
BS EN ISO 7886-2-1996 |
一次性使用无菌皮下注射器.人工注射器 |
(Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps) |
BS EN ISO 7887-1995 |
水质.颜色测定和检验 |
Water quality - Examination and determination of colour |
BS EN ISO 7899-1-1999 |
水质.表面和废水中大肠杆菌计数和检测.液体介质中培养的小型化方法(最可能的数目) |
Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Miniaturized method (Most probable number) for surface and waste water |
BS EN ISO 7899-2-2000 |
水质.水表面和废水中大肠杆菌的计数和检测.膜过滤法 |
(Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Membrane filtration method) |
BS EN ISO 7932-1994 |
微生物学.芽胞杆菌计数的通用指南.30℃的菌落计数技术 |
Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count technique at 30 鳦 |
BS EN ISO 7932-2004 |
食品和动物饲料的微生物学.蜡状芽孢杆菌计数的水平方法.30℃时菌落计数技术 |
|
BS EN ISO 7933-2005 |
热环境的人类工效学.通过计算预测的热应变对热应力的分析测定和说明 |
|
BS EN ISO 7937-2004 |
食品和动物饲料的微生物学.ostridium perfringens计数的水平方法.菌落计数技术 |
|
BS EN ISO 7937-2004 |
食品和动物饲料的微生物学.$7i梭菌属perfringens$7r计数的水平方法.菌落计数技术 |
|
BS EN ISO 7937-2004 |
食品和动物饲料的微生物学.梭菌属perfringens计数的水平方法.菌落计数技术 |
|
BS EN ISO 7944-1998 |
光学和光学仪器.基准波长 |
Optics and optical instruments - Reference wavelengths |
BS EN ISO 7965-2-1995 |
包装.包装袋.坠落试验.第2部分:由柔性热塑性塑料簿膜制成的包装袋 |
Sacks - Drop test - Sacks made from thermoplastic flexible film |
BS EN ISO 7998-1996 |
光学和光学仪器.眼镜框架.等义术语表及词汇 |
Optics and optical instruments - Spectacle frames - Vocabulary and lists of equivalent terms |
BS EN ISO 801-1-1995 |
纸浆.成批销售质量的测定.板式包装纸浆 |
Pulps - Determination of saleable mass in lots - Pulp baled in sheet form |
BS EN ISO 801-3-1995 |
纸浆.成批销售质量的测定.承载式包 |
Pulps - Determination of saleable mass in lots - Unitized bales |
BS EN ISO 8028-2000 |
无空气涂料喷涂用塑料和/或橡胶软管组件.规范 |
Rubber and/or plastics hose assemblies for airless paint spraying - Specification |
BS EN ISO 8030-1998 |
橡胶和塑料软管.易燃性的试验方法 |
Rubber and plastics hoses - Method of test for flammability |
BS EN ISO 8031-1997 |
橡胶和塑料软管和软管组件.电阻的测定 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance |
BS EN ISO 8044-2000 |
金属和合金的腐蚀性.基本术语和定义 |
Corrosion of metals and alloys - Basic terms and definitions |
BS EN ISO 8067-1995 |
软质泡沫聚合材料.抗撕裂强度的测定 |
(Flexible cellular polymeric materials - Determination of tear strength) |
BS EN ISO 8092-1-1998 |
道路车辆.线路板上电线配件的连接.单极连接接头标记.尺寸和特殊要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements) |
BS EN ISO 8092-2-2002 |
道路车辆.车载电气线束的连接.定义、试验方法、一般性能要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements) |
BS EN ISO 8092-3-1999 |
道路车辆.电子线路板上电线束用连接.多极连接的标记.尺寸和特殊要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements) |
BS EN ISO 8092-4-1999 |
道路车辆.电子线路板上电线束用连接.单极和多极连接用销钉.尺寸和特殊要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Pins for single- and multi-pole connections - Dimensions and specific requirements) |
BS EN ISO 8099-2001 |
小型船舶.卫生间废弃物积集系统 |
(Small craft - Toilet waste retention systems) |
BS EN ISO 8106-2004 |
玻璃容器.用重量法测定容量.试验方法 |
|
BS EN ISO 8106-2004 |
玻璃容器.用重量法测定容量.试验方法 |
|
BS EN ISO 8106-2004 |
玻璃容器.用重量法测定容量.试验方法 |
|
BS EN ISO 8113-2004 |
玻璃容器.抗垂直负载.试验方法 |
|
BS EN ISO 8130-14-2004 |
粉末涂料.术语 |
|
BS EN ISO 8166-2003 |
电阻焊.用恒定焊机设定值评定点焊电极使用寿命的规程 |
(Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings) |
BS EN ISO 81714-1-2001 |
用于产品技术文献的图形符号的设计.基本规则 |
(Design of graphical symbols for use in the technical documentation of products - Basic rules) |
BS EN ISO 8178-1-1996 |
往复式内燃机.排气污染测定.第1部分:气体和颗粒物质排放污染的试验台测定法 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions) |
BS EN ISO 8178-2-1997 |
往复式内燃机.排气污染测定.第2部分:气体和颗粒物质排放污染的定点测量 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions at site) |
BS EN ISO 8178-4-1996 |
往复式内燃机.排气污染测定.第4部分:不同发动机应用的试验周期 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles for different engine applications) |
BS EN ISO 8178-5-1997 |
往复式内燃机排气污染指数的测定.第5部分:燃料试验 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels) |
BS EN ISO 8178-6-2001 |
往复式内燃机.废气排放测定.测量结果和试验的报告 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests) |
BS EN ISO 8185-1998 |
医用增湿器.增湿系统的一般要求 |
(Humidifiers for medical use - General requirements for humidification systems) |
BS EN ISO 8192-1987 |
水质.用活化的污泥抑制氧消耗量的试验 |
(Water quality - Test for the inhibition of oxygen consumption by activated sludge) |
BS EN ISO 8205-1-2002 |
电阻焊用水冷辅助连接电缆.双芯连接电缆的尺寸和要求 |
(Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables) |
BS EN ISO 8205-2-2002 |
电阻焊用水冷辅助连接电缆.单芯连接电缆的尺寸和要求 |
(Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables) |
BS EN ISO 8205-3-1997 |
电阻焊接水冷次级线圈连接电缆.第3部分:试验要求 |
(Water-cooled secondary connection cables for resistance welding - Test requirements) |
BS EN ISO 8222-2002 |
石油测量系统.校准.用容积基准测量罐的校正温度 |
(Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks) |
BS EN ISO 8224-1-2003 |
移动式灌溉机械.操作特性、实验室和现场试验方法 |
(Traveller irrigation machines - Operational characteristics and laboratory and field test methods) |
BS EN ISO 8230-1998 |
使用全氯乙烯的干洗机的安全要求 |
(Safety requirements for dry-cleaning machines using perchloroethylene) |
BS EN ISO 8249-2000 |
焊接.奥氏体和双重奥氏体铁氧体铬镍不锈钢焊接金属中铁素体数的测定 |
(Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals) |
BS EN ISO 8253-1-1998 |
声学.测声试验方法.基本纯声调空气和骨传导声测定 |
(Acoustics - Audiometric test methods - Basic pure tone air and bone conduction threshold audiometry) |
BS EN ISO 8253-2-1993 |
声学.听力试验方法.带纯音和窄频带信号的声场测听术 |
(Acoustics - Audiometric test methods - Sound field audiometry with pure tone and narrow-band test signals) |
BS EN ISO 8253-3-1998 |
声学.听力测试方法.语言测听术 |
(Acoustics - Audiometric test methods - Speech audiometry) |
BS EN ISO 8254-1-2000 |
纸和纸板.光泽度的测量.用聚光束的75度,TAPPI法 |
(Paper and board - Measurement of specular gloss - 75 ?gloss with a converging beam, TAPPI method) |
BS EN ISO 8254-2-2003 |
纸和纸板.光泽度的测量.用平行光束的75度,DIN法 |
(Paper and board - Measurement of specular gloss - 75 ?gloss with a parallel beam, DIN method) |
BS EN ISO 8256-1991 |
塑料.拉伸冲击强度测定 |
(Plastics - Determination of tensile-impact strength) |
BS EN ISO 8256-2004 |
塑料.拉伸冲击强度测定 |
|
BS EN ISO 8261-2002 |
乳和乳制品.用于微生物检验的试验样品、初始悬浮液和十倍制稀释液的制备的通用指南 |
(Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination) |