标准号 |
中文名称 |
英文名称 |
BS ISO 17776-2001 |
石油和天然气工业.海上生产装置.危险识别和风险评定用工具和技术的导则 |
Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment |
BS ISO 1781-1995 |
电影技术.直接正面放映用8mmS型电影胶片放映机的用法 |
Cinematography - Projector usage of 8 mm type S motion-picture film for direct front projection |
BS ISO 1785-1996 |
电影技术.在穿孔8mm、S(1-4)型16mm电影胶片上拷贝的8mm、S型影像区.位置和尺寸 |
Cinematography - Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) - Position and dimensions |
BS ISO 1787-1996 |
电影技术.8mmS型电影胶片电影摄影机的用法规范 |
Cinematography - Camera usage of 8 mm Type S motion-picture film - Specifications |
BS ISO 17884-2004 |
船舶和海上技术.快艇用探照灯 |
|
BS ISO 17899-2004 |
船舶和海上技术.船上窗用电刮水器 |
|
BS ISO 17900-2002 |
农用挂车.平衡半悬挂式挂车.测定负荷、垂直负荷和轴承负荷 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
BS ISO 1793-2005 |
电影.16mm电影放映机用片夹(容量610m及以下:尺寸38cm).尺寸 |
|
BS ISO 1795-2000 |
天然和合成生橡胶.取样和进一步的准备过程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
BS ISO 17973-2003 |
表面化学分析.中分辨率螺旋电子光谱仪.素分析用能量标度的校准 |
Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
BS ISO 17974-2002 |
表面化学分析.高分辨率螺旋电子光谱仪.素和化学状态分析用能量标度的校准 |
Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis |
BS ISO 17993-2002 |
水质.液体对液体萃取后用HPLC荧光检波在水中对15个多环芳香烃的测定 |
Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction |
BS ISO 17997-1-2005 |
乳.酪蛋白氮含量测定.间接方法(参照法) |
|
BS ISO 17997-2-2005 |
乳.酪蛋白氮含量测定.直接方法 |
|
BS ISO 1803-1998 |
建筑结构.公差.尺寸精度的表示法.原则和术语 |
Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology |
BS ISO 18054-2004 |
鸢尾根茎油.铁含量测定.毛细柱气相色谱法 |
|
BS ISO 18054-2004 |
鸢尾根茎油.铁含量测定.毛细管柱气相色谱法 |
|
BS ISO 18055-1-2004 |
摄影和成像.喷墨介质.分类、命名和尺寸.照片级介质(相纸和胶片) |
|
BS ISO 18064-2003 |
热塑性弹性体.命名和缩写的术语 |
(Thermoplastic elastomers - Nomenclature and abbreviated terms) |
BS ISO 18073-2004 |
水质.三氯至八氯二氧杂环乙烯和呋喃的测定.同位素稀释HRGC/HRMS法 |
|
BS ISO 18114-2003 |
表面化学分析.次级离子质谱法.测定离子注入标样的相对灵敏系数 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials) |
BS ISO 18115-2001 |
表面化学分析.词汇 |
Surface chemical analysis - Vocabulary |
BS ISO 18118-2005 |
表面化学分析.俄歇电子光谱法和X射线光电子光谱法.同质材料定量分析用实验室测定相对敏感性系数的使用指南 |
|
BS ISO 18164-2005 |
乘用车、卡车、公共汽车和摩托车轮胎.滚动阻力测量方法 |
|
BS ISO 18165-2002 |
石油和天然气工业.水泥漂浮设备的性能试验 |
Petroleum and natural gas industries - Performance testing of cementing float equipment |
BS ISO 1817-1999 |
硫化橡胶.液化效果的测定 |
Rubber, vulcanized - Determination of the effect of liquids |
BS ISO 1830-2005 |
纸、纸板和纸浆.酸溶性锰的测定 |
|
BS ISO 1832-2004 |
切削刀具用可转位刀片.名称与符号 |
|
BS ISO 18329-2004 |
乳和乳制品.furosine含量的测定.离子对反相高效液相色谱法 |
|
BS ISO 18333-2003 |
物料装卸用托盘.平板托盘用新木制部件的质量 |
Pallets for materials handling - Quality of new wooden components for flat pallets |
BS ISO 18334-2003 |
材料运输用托盘.新的木制平托盘的组装质量 |
Pallets for materials handling - Quality of assembly of new, wooden, flat pallets |
BS ISO 1834-1999 |
提升用短扁节链.验收的一般条件 |
Short link chain for lifting purposes - General conditions of acceptance |
BS ISO 1837-2003 |
起重钩.命名 |
(Lifting hooks - Nomenclature) |
BS ISO 18395-2005 |
动植物脂肪和油.用高效粒度排除色谱法(HPSEC)测定单酰甘油、二酰甘油、三酰甘油和丙三醇 |
|
BS ISO 18413-2002 |
液压传动装置.零件和组件的清洁度.与长期收集、分析和数据报告相关的审核文件 |
Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
BS ISO 18431-2-2005 |
机械振动和冲击.信号处理.傅里叶变换分析用时域窗 |
|
BS ISO 18436-1-2004 |
机器的工况监测与诊断.人员的培训与认证要求.认证机构和认证过程的要求 |
|
BS ISO 18553-2002 |
在聚烯烃管、配件和化合物中色料或炭黑分散程度的评定方法 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
BS ISO 18573-2003 |
输送带.试验大气和状态调节期 |
(Conveyor belts - Test atmospheres and conditioning periods) |
BS ISO 18593-2004 |
食物和动物饲料的微生物学.使用接触板和拭子的表面取样技术的水平方法 |
|
BS ISO 18649-2004 |
机械振动.桥梁动态试验和调查的测量结果的评价 |
|
BS ISO 18653-2003 |
齿轮.单个齿轮测量仪器的评价 |
(Gears - Evaluation of instruments for the measurement of individual gears) |
BS ISO 18669-1-2005 |
内燃机.活塞销.一般规范 |
|
BS ISO 18669-2-2005 |
内燃机.活塞销.检验测量原理 |
|
BS ISO 18738-2003 |
升降机(电梯).升降机提升质量测定 |
(Lifts (elevators) - Measurement of lift ride quality) |
BS ISO 188-1998 |
硫化或热塑橡胶.加速老化或耐热性试验 |
Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests |
BS ISO 18852-2005 |
橡胶配合料.多点氮表面积(NSA)和统计厚度表面积(STSA)的测定 |
|
BS ISO 18857-1-2005 |
水质.所选烷基苯酚的测定.使用液-液萃取和带质量选择检测的气相色谱法的无过滤样品法 |
|
BS ISO 1887-1995 |
纺织玻璃纤维.可燃物质含量的测定 |
Textile glass - Determination of combustible-matter content |
BS ISO 18878-2004 |
移动式升降工作台.驾驶员培训 |
|
BS ISO 1888-1997 |
纺织玻璃纤维.人造纤维或长丝.平均直径的测定 |
Textile glass - Staple fibres or filaments - Determination of average diameter |
BS ISO 18899-2004 |
橡胶.试验设备的校正指南 |
|
BS ISO 18901-2002 |
成象材料.加工银胶质类黑白底片.稳定性规范 |
Imaging materials - Processed silver-gelatin type black-and-white film - Specifications for stability |
BS ISO 18902-2001 |
成像材料.加工摄影胶片,板和纸.贮存容器 |
Imaging materials - Processed photographic films, plates and papers - Filing enclosures and storage containers |
BS ISO 18903-2003 |
成像材料.摄影胶片和相纸的尺寸变化测定 |
Imaging materials - Films and paper - Determination of dimensional change |
BS ISO 18904-2000 |
成像材料.冲洗过的胶片.测定润滑方法 |
Imaging materials - Processed films - Method for determining lubrication |
BS ISO 18905-2002 |
成象材料.氨水处理重氮摄影胶片.稳定性的规范 |
Imaging materials - Ammonia-processed diazo photographic film - Specifications for stability |
BS ISO 18906-2001 |
成像材料.摄影胶片.安全胶片规范 |
Imaging materials - Photographic films - Specifications for safety film |
BS ISO 18907-2000 |
成像材料.摄影胶片和相纸.脆性的锤击韧性试验 |
Imaging materials - Photographic films and papers - Wedge test for brittleness |
BS ISO 18908-2000 |
成像材料.摄影胶片.耐折叠性的测定 |
Imaging materials - Photographic film - Determination of folding endurance |
BS ISO 18910-2000 |
成像材料.摄影胶片和相纸.弯曲测定 |
Imaging materials - Photographic film and paper - Determination of curl |
BS ISO 18911-2001 |
摄影技术.加工过的安全摄影胶片.储存方法 |
Photography - Processed safety photographic films - Storage practices |
BS ISO 18912-2002 |
成象材料.处理微泡状摄影胶片.稳定性的规范 |
Imaging materials - Processed vesicular photographic film - Specifications for stability |
BS ISO 18914-2002 |
成像材料.摄影胶片和感光纸.测定摄影感光乳剂耐湿磨性方法 |
Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion |
BS ISO 18915-2001 |
成像材料.抗氧化银影化学转化效果的评定方法 |
Imaging materials - Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation |
BS ISO 18917-2000 |
摄影.在处理过的摄影材料上残留的硫代硫酸盐和其它相关的化学药品的测定.碘-淀粉、亚甲蓝和硫化银方法 |
Photography - Determination of residual thiosulfate and other related chemicals in processed photographic materials - Methods using iodine-amylose, methylene blue and silver sulfide |
BS ISO 18918-2000 |
成像材料.处理过的照相干版.存储方法 |
Imaging materials - Processed photographic plates - Storage practices |
BS ISO 18919-1999 |
成像材料.热处理银盐微缩胶片.稳定性规范 |
Photography - Thermally processed silver microfilm - Specifications for stability |
BS ISO 18920-2000 |
成像材料.处理过的照相反射光印片.存储方法 |
Imaging materials - Processed photographic reflection prints - Storage practices |
BS ISO 18921-2002 |
成像材料.只读数据光盘(CD-ROM).基于温度和相对湿度效应的概率寿命的估算方法 |
Imaging materials - Compact discs (CD-ROM) - Method for estimating the life expectancy based on the effects of temperature and relative humidity |
BS ISO 18922-2003 |
成像材料.已冲洗过的摄影胶片.测定耐划伤的方法 |
(Imaging materials - Processed photographic films - Methods for determining scratch resistance) |
BS ISO 18923-2000 |
成像材料.聚酯基磁带.存储方法 |
Imaging materials - Polyester-base magnetic tape - Storage practices |
BS ISO 18924-2000 |
成像材料.Arrhenius型预测的试验方法 |
Imaging materials - Test methods for Arrhenius type predictions |
BS ISO 18925-2002 |
成象材料.光盘介质.储存惯例 |
Imaging materials - Optical disk media - Storage practices |
BS ISO 18927-2002 |
成象材料.可再记录大密度盘系统.在温度和相对湿度的影响基础上期望寿命的估计方法 |
Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based on the effects of temperature and relative humidity |
BS ISO 18928-2002 |
成象材料.未经处理的摄影胶片和相纸.储存规程 |
Imaging materials - Unprocessed photographic films and papers - Storage practices |
BS ISO 18929-2004 |
成像材料.湿处理的银胶式黑白摄影反射光印片.避光储存规范 |
|
BS ISO 18932-2005 |
成像材料.胶粘系统.规范 |
|
BS ISO 19018-2005 |
船舶和海上技术.导航术语、缩写、图形符号和概念 |
|
BS ISO 19101-2002 |
地质信息.参考模型 |
Geographic information - Reference model |
BS ISO 19105-2001 |
地理信息.一致性及试验 |
Geographic information - Conformance and testing |
BS ISO 19106-2004 |
地理信息.概要 |
|
BS ISO 19107-2003 |
地理信息.空间图解 |
(Geographic information - Spatial schema) |
BS ISO 19108-2002 |
地理信息.暂存概要 |
Geographic information - Temporal schema |
BS ISO 19109-2005 |
地理信息.应用图表规则 |
|
BS ISO 19110-2005 |
地理信息.特征分类法 |
|
BS ISO 19111-2003 |
地理信息.利用坐标系的空间参考 |
(Geographic information - Spatial referencing by coordinates) |
BS ISO 19113-2003 |
地理信息.质量原理 |
Geographic information - Quality principles |
BS ISO 19114-2003 |
地理信息.质量评价规程 |
(Geographic information - Quality evaluation procedures) |
BS ISO 19115-2003 |
地理信息.数据 |
(Geographic information - Metadata) |
BS ISO 19116-2005 |
地理信息.定位服务 |
|
BS ISO 19125-1-2005 |
地理信息.简单特征存取.通用体系结构 |
|
BS ISO 19125-2-2005 |
地理信息.简单特征存取.SQL选择 |
|
BS ISO 1919-1998 |
道路车辆.平底座M14×1.25火花塞和汽缸上火花塞座 |
Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
BS ISO 1922-2001 |
硬质多孔塑料.剪切强度的测定 |
Rigid cellular plastics - Determination of shear strength |
BS ISO 19238-2004 |
辐射防护.进行细胞遗传学生物剂量测定的工作实验室的性能标准 |
|
BS ISO 1924-3-2005 |
纸和纸板.抗张性能的测定.恒速拉伸法(100 mm/min) |
|
BS ISO 1925-2001 |
机械振动.平衡.词汇 |
Mechanical vibration - Balancing - Vocabulary |
BS ISO 19318-2005 |
表面化学分析.X射线光电光谱法.电荷控制和电荷校正方法的报告 |
|
BS ISO 19378-2003 |
润滑剂、工业用油和相关产品(L级).机床润滑剂.等级和规范 |
(Lubricants, industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications) |
BS ISO 19379-2003 |
船舶和海上技术.ECS数据库.内容、质量、更新和测试 |
(Ships and marine technology - ECS databases - Content, quality, updating and testing) |
BS ISO 1940-1-2005 |
机械振动.在恒定(刚性)状态下转子的平衡质量要求.平衡公差的规范和检定 |
|
BS ISO 19438-2004 |
内燃机用柴油燃料和汽油过滤器.用粒子计数和污物滞留量测定过滤效率 |
|
BS ISO 19438-2004 |
内燃机用柴油燃料和汽油过滤器.用粒子计数和污物滞留量测定过滤效率 |
|
BS ISO 1957-2000 |
机织地板覆盖物.物理试验用样品的选择和剪裁 |
Machine-made textile floor coverings - Selection and cutting of specimens for physical tests |
BS ISO 19739-2004 |
天然气.用气相色谱法测定硫化合物的含量 |
|
BS ISO 1977-2001 |
输送链、附件和链轮 |
Conveyor chains, attachments and sprockets |
BS ISO 19819-2004 |
金属材料.液态氦中的抗拉试验 |
|
BS ISO 1984-1-2001 |
固定高度的台面的手工控制的铣床的试验条件.精度试验.带有水平主轴的机器 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with horizontal spindle |
BS ISO 1984-2-2001 |
固定高度的台面的手工控制的铣床的试验条件.精度试验.带有垂直主轴的机器 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle |
BS ISO 1985-1998 |
机床.有往复工作台的立式平面磨床的试验条件.精度试验 |
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy |
BS ISO 1986-1-2001 |
卧轴矩台平面磨床的验收条件.精度检验.工作台长度达到1600mm的机床 |
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm |
BS ISO 19860-2005 |
燃气轮机.燃气轮机装置的数据获取和趋势监控系统要求 |
|
BS ISO 199-1998 |
滚动轴承.止推滚珠轴承.公差 |
Rolling bearings - Thrust bearings - Tolerances |
BS ISO 1997-1993 |
粒状软木和软木粉.分类、特性和包装 |
Granulated cork and cork powder - Classification, properties and packing |
BS ISO 1998-1-1999 |
石油工业.术语.原料和产品 |
Petroleum industry - Terminology - Raw materials and products |
BS ISO 1998-2-1999 |
石油工业.术语.性质和试验 |
Petroleum industry - Terminology - Properties and tests |
BS ISO 1998-3-1999 |
石油工业.术语.第3部分:勘探和开采 |
Petroleum industry - Terminology - Exploration and production |
BS ISO 1998-4-1999 |
石油工业.术语.第4部分:炼制 |
Petroleum industry - Terminology - Refining |
BS ISO 1998-5-1999 |
石油工业.术语.第5部分:运输,储存,分配 |
Petroleum industry - Terminology - Transport, storage, distribution |