标准号 |
中文名称 |
英文名称 |
DIN EN ISO 14125 Berichtigung 1-2003 |
DINENISO14125-1998的技术勘误 |
(Corrigenda to DIN EN ISO 14125:1998-06 (EN ISO 14125:1998/AC:2002)) |
DIN EN ISO 14125-1998 |
纤维增强塑料.弯曲性能测定 |
(Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998) |
DIN EN ISO 14126 Berichtigung 1-2003 |
DINENISO14126-2000的技术勘误 |
(Corrigenda to DIN EN ISO 14126:2000-12 (EN ISO 14126:1999/AC:2002)) |
DIN EN ISO 14126-2000 |
纤维增强塑料混合物.水平方向压缩能力的测定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999) |
DIN EN ISO 14129-1998 |
纤维增强塑料.测定切应力/切变形用45度层压塑料的抗伸试验.层面中抗剪模数的曲线 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by45 tension test method (ISO 14129:1997); German version EN ISO 14129:1997) |
DIN EN ISO 14130-1998 |
纤维增强塑料.用短梁按三点法测定表面层间抗剪强度 |
(Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997) |
DIN EN ISO 14159-2004 |
机械安全.机械设计的卫生要求 |
|
DIN EN ISO 14160-1998 |
源于动物成份一次性用医学产品的消毒.液体消毒液消毒的确认和例行监测 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants (ISO 14160:1998); German version EN ISO 14160:1998) |
DIN EN ISO 14161-2001 |
医疗保健产品的消毒.生物指示剂.结果的选择、使用和解释导则 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000); German version EN ISO 14161:2000) |
DIN EN ISO 14163-1999 |
声学.消音器噪声控制指南 |
(Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998) |
DIN EN ISO 14172-2004 |
焊接消耗品.镍和镍合金的手工金属弧焊接的药皮电焊条.分类 |
|
DIN EN ISO 14181-2001 |
动物饲料.有机氯化物农药残留物的测定.气相色谱法 |
(Animal feeding stuffs - Determination of residues of organochlorine pesticides - Gas chromatographic method (ISO 14181:2000); German version EN ISO 14181:2000) |
DIN EN ISO 14182-2000 |
动物饲料.有机磷杀虫剂残留物的测定.气相色谱法 |
(Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method (ISO 14182:1999); German version EN ISO 14182:1999) |
DIN EN ISO 14184-1-1999 |
纺织物.甲醛含量的测定.第1部分:游离和水解甲醛(水萃取法) |
(Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998); German version EN ISO 14184-1:1998) |
DIN EN ISO 14184-2-1998 |
织物.甲醛含量的测定.第2部分:游离甲醛(水蒸气吸收法) |
(Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:1998); German version EN ISO 14184-2:1998) |
DIN EN ISO 1421-1998 |
用橡胶和塑料涂层的织物.抗拉强度和断裂伸长的测定 |
(Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998) |
DIN EN ISO 14246-2001 |
可运输气瓶.气瓶阀.生产试验和检验 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001) |
DIN EN ISO 14253-1 Bb.1-2000 |
几何产品规范(GPS).通过对工件和测量设备的测量进行检验.产品检验过程中测量设备的校正,在GPS测量中不确定 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999 |
DIN EN ISO 14253-1-1999 |
几何产品规范(GPS).通过测量检验工件和测量仪器.第1部分:用规范对一致性或不一致性进行检验的判定规则 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998): German version EN ISO 14253-1:1998) |
DIN EN ISO 14257-2002 |
声学.评价其声响性能用工作室空间声音分布曲线的测量及参数描述(ISO14257:2001) |
(Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); German version EN ISO 14257:2001) |
DIN EN ISO 14270-2002 |
电阻点焊、滚焊和凸焊机械剥离试验的规程和样品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2000); German version EN ISO 14270:2001) |
DIN EN ISO 14271-2002 |
电阻点焊、凸焊和滚焊的维氏硬度试验(低荷载和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) (ISO 14271:2000); German version EN ISO 14271:2001) |
DIN EN ISO 14272-2002 |
电阻点焊和凸焊十字形拉力试验的规程和样品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001) |
DIN EN ISO 14273-2002 |
电阻点焊、缝焊和凸焊的抗剪试验用样品尺寸和程序(ISO14273:2000) |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000); German version EN ISO 14273:2002) |
DIN EN ISO 14284-2003 |
钢铁.测定化合物用样品的取样和制备方法 |
(Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002) |
DIN EN ISO 14310-2003 |
石油和天然气工业.下井设备.封隔器和桥塞 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts) |
DIN EN ISO 14314-2004 |
往复式内燃机.反冲起动设备.一般安全要求 |
|
DIN EN ISO 14327-2004 |
电阻焊接.电阻点焊、凸焊和缝焊的可焊性凸角的测定过程 |
|
DIN EN ISO 14344-2005 |
焊接和类似工艺.熔化和气体保护电焊过程.消耗品的采购指南 |
|
DIN EN ISO 14344-2005 |
焊接和类似工艺.熔化和气体保护电焊过程.消耗品的采购指南 |
|
DIN EN ISO 14372-2002 |
焊接消耗物.通过测量可扩散氢测定手工金属电弧焊电极的抗湿性 |
(Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000); German version EN ISO 14372:2002) |
DIN EN ISO 14402-1999 |
水质.流量分析方法测定苯酚指数(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999); German version EN ISO 14402:1999) |
DIN EN ISO 14403-2002 |
水质.用连续流量分析法测定总氰化物和游离氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002); German version EN ISO 14403:2002) |
DIN EN ISO 14408-2005 |
激光手术用气管掐管.标识及随机文件要求 |
|
DIN EN ISO 14419-1999 |
纺织材料.耐油性.耐碳氢化合物的试验 |
(Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998); German version EN ISO 14419:1999) |
DIN EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的测定.计算法 |
(Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002); German version EN ISO 14438:2002) |
DIN EN ISO 14453-1998 |
纸浆.丙酮-溶解物质的测定 |
(Pulps - Determination of acetone-soluble matter (ISO 14453:1997); German version EN ISO 14453:1998) |
DIN EN ISO 14460-2002 |
汽车赛车手防护服.防热和防火焰.性能要求和检验方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999 + Amd. 1:2002) (includes Corrigendum AC:1999 and Amendment A1:2002); German version EN ISO 14460:1999 + AC:1 |
DIN EN ISO 14501-1999 |
奶和奶粉.黄曲霉毒素M1含量的测定.用immunoaffinitiy色谱法提炼和用高效液体色谱分析法测定 |
(Milk and milk powder - Determination of aflatoxin M content - Clean-up by immunoaffinity chromatographie and determination by high-performance liquid chromatography (ISO 14501:1998); German version EN ISO 14501:1998) |
DIN EN ISO 14509-2001 |
小型船舶.动力娱乐船发出的气载噪声的测定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000); German version EN ISO 14509:2000) |
DIN EN ISO 14509/A1-2004 |
小艇.动力娱乐用艇发出的空气噪音的测量.修改件1 |
|
DIN EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999) |
DIN EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999) |
DIN EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999) |
DIN EN ISO 14527-1-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999) |
DIN EN ISO 14527-2-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999) |
DIN EN ISO 14527-3-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:对所选的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999); German version EN ISO 14527-3:1999) |
DIN EN ISO 14528-1-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999) |
DIN EN ISO 14528-2-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999) |
DIN EN ISO 14528-3-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999) |
DIN EN ISO 14529-1-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999) |
DIN EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999) |
DIN EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999) |
DIN EN ISO 14530-1-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999) |
DIN EN ISO 14530-2-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999) |
DIN EN ISO 14530-3-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999) |
DIN EN ISO 14534-2002 |
眼科光学.接触镜片和接触镜片护理产品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002); German version EN ISO 14534:2002) |
DIN EN ISO 14539-2002 |
操作型工业机器人.用抓式钳子进行物品传递.词汇和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type-grippers - Vocabulary and presentation of caracteristics (ISO 14539:2000); German version EN ISO 14539:2001) |
DIN EN ISO 14554-1-2000 |
焊接质量要求.金属材料的电阻焊接.第1部分:综合质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000) |
DIN EN ISO 14554-2-2000 |
焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000) |
DIN EN ISO 14555-1998 |
焊接.金属材料的电弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials (ISO 14555:1998); German version EN ISO 14555:1998) |
DIN EN ISO 14556-2000 |
钢.却贝V形切痕摆式冲击试验.仪器试验法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000); German version EN ISO 14556:2000) |
DIN EN ISO 14557-2003 |
消防水龙带.橡胶和塑料吸水软管和软管组件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002); German version EN ISO 14557:2002) |
DIN EN ISO 14565-2001 |
动物饲料.维生素A含量的测定.高性能液相色谱法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography (ISO 14565:2000); German version EN ISO 14565:2000) |
DIN EN ISO 14577-1-2003 |
金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002) |
DIN EN ISO 14577-2-2003 |
金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002) |
DIN EN ISO 14577-3-2003 |
金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002) |
DIN EN ISO 14579-2002 |
圆柱头内六角螺钉 |
(Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001) |
DIN EN ISO 14580-2002 |
凸头内六角螺钉 |
(Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001) |
DIN EN ISO 14583-2002 |
平头内六角螺钉 |
(Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001) |
DIN EN ISO 14584-2002 |
半埋头内六角螺钉 |
(Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001) |
DIN EN ISO 14585-2002 |
平头内六角攻丝螺钉 |
(Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001) |
DIN EN ISO 14586-2002 |
沉头内六角攻丝螺钉 |
(Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001) |
DIN EN ISO 14587-2002 |
半沉头(椭圆形)内六角攻丝螺钉 |
(Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); Geman version EN ISO 14587:2001) |
DIN EN ISO 14588-2001 |
沉头铆钉.术语和定义 |
(Blind rivets - Terminology and definitions (ISO 14588:2000); German version EN ISO 14588:2000) |
DIN EN ISO 14589-2001 |
沉头铆钉.机械试验 |
(Blind rivets - Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000) |
DIN EN ISO 14593-2005 |
水质.水介质中有机化合物最大需氧生物降解能力的评价.密封容器中无机碳分析法(CO2顶空试验) |
|
DIN EN ISO 14596-1998 |
矿物油产品.硫含量测定.波长弥散X射线荧光光谱法 |
(Petroleum products - Determination of sulphur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:1998); German version EN ISO 14596:1998) |
DIN EN ISO 14597-1999 |
矿物油制品.钒和镍含量的测定.波长分散X射线荧光分析法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997); German version EN ISO 14597:1999) |
DIN EN ISO 1460-1995 |
金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量 |
(Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994) |
DIN EN ISO 14602-1998 |
稳定的外科植入物.骨接合术用植入物.特殊要求 |
(Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO 14602-1998); German version EN ISO 14602:1995) |
DIN EN ISO 1461 Bb.1-1999 |
通过钢上热镀锌产生的锌镀层(块镀锌).要求和检验 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods; (ISO 1461:1999); indications of application of this standard) |
DIN EN ISO 1461-1999 |
通过钢上热镀锌产生的锌镀层(块镀锌).要求和检验 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999); German version EN ISO 1461:1999) |
DIN EN ISO 14616-2004 |
塑料.聚乙烯、乙烯共聚物及其混合物的热可缩薄膜.收缩应力的测定 |
|
DIN EN ISO 14620-1-2005 |
航天系统.安全要求.第1部分:系统安全 |
|
DIN EN ISO 1463-1995 |
金属和氧化物镀层.镀层厚度的测定.显微镜法 |
(Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:1982); German version EN ISO 1463:1994) |
DIN EN ISO 1463-2004 |
金属和氧化物镀层.镀层厚度的测定.显微镜法 |
|
DIN EN ISO 14630-1997 |
非活动外科植入物的一般要求 |
(Non-active surgical implants - General requirements (ISO 14630:1997); German version EN ISO 14630:1997) |
DIN EN ISO 14631-1999 |
冲击改良的聚苯乙烯(PS-I)的挤压片.要求和试验方法 |
(Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999); German version EN ISO 14631:1999) |
DIN EN ISO 14632-1999 |
聚乙烯(PE-HD)的挤压片材.要求和试验方法 |
(Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998); German version EN ISO 14632:1998) |
DIN EN ISO 14644-1-1999 |
无菌室和相关控制环境.第1部分:空气清洁度分级 |
(Cleanroom and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999); German version EN ISO 14644-1:1999) |
DIN EN ISO 14644-2-2001 |
无菌室和相关控制环境.第2部分:连续证实与ISO14644-1相符的试验和监测规范 |
(Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000); German version EN ISO 14644-2:2000) |
DIN EN ISO 14644-4-2003 |
无菌室和相关受控环境.第4部分:设计、建造和运行 |
(Cleanrooms and associated controlled environments - Part 4: Design, construction and start up (ISO 14644-4:2001); German version EN ISO 14644-4:2001) |
DIN EN ISO 14644-7-2005 |
洁净室和相关控制环境.第7部分:分离设备(洁净空气罩、手套式操作箱、分离器和微环境) |
|
DIN EN ISO 14660-1-1999 |
几何产品规范(GPS).几何特性.第1部分:一般术语与定义 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999); German version EN ISO 14660-1:1999) |
DIN EN ISO 14660-2-1999 |
几何产品规范(GPS).几何特性.第2部分:圆柱体和圆锥体中心线的确定、表面中心的确定、确定位置尺寸的要求 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999); German version EN ISO 14660-2:1999) |
DIN EN ISO 14673-1-2002 |
牛奶和牛奶制品.测定硝酸盐和亚硝酸盐的含量.第1部分:镉还原法和光谱测定法 |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2001); German version EN ISO 14673-1:2001) |
DIN EN ISO 14673-1-2004 |
乳和乳制品.硝酸盐和亚硝酸盐含量的测定.第1部分:镉还原和光谱测定法 |
|
DIN EN ISO 14673-2-2002 |
牛奶和牛奶制品.测定硝酸盐和亚硝酸盐的含量.第2部分:分段式流体分析法(常规法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2001); German version EN ISO 14673-2:2001) |
DIN EN ISO 14673-2-2004 |
乳和乳制品.硝酸盐和亚硝酸盐含量的测定.第2部分:分层流分析法(常规法) |
|
DIN EN ISO 14673-3-2002 |
牛奶和牛奶制品.测定硝酸盐和亚硝酸盐的含量.第3部分:镉还原法和带有流线渗析的流体注入分析法(常规法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2001); German version EN ISO 14673-3:2001) |
DIN EN ISO 14673-3-2004 |
乳和乳制品.硝酸盐和亚硝酸盐含量的测定.第3部分:线渗析镉还原和流注入分析法(常规法) |
|
DIN EN ISO 14675-2003 |
牛奶和牛奶制品.竞争酶免疫分析法的标准化描述指南.黄曲霉毒素含量的测定 |
(Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content (ISO 14675:2003); German version EN ISO 14675:2003) |
DIN EN ISO 14678-2005 |
胶粘剂.耐流动性的测定 |
|
DIN EN ISO 14683-1999 |
建筑物中的热桥.线性热穿透系数.简化方法和近似值 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:1999); German version EN ISO 14683:1999) |
DIN EN ISO 14688-1-2003 |
土工调查和试验.土壤的识别和分类.第1部分:识别和描述 |
(Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002); German version EN ISO 14688-1:2002) |
DIN EN ISO 14688-2-2004 |
土工调查和试验.土壤的识别和分类.第2部分:分类总则 |
|
DIN EN ISO 14689-1-2004 |
土工调查和试验.岩石的鉴定和分类.第1部分:鉴定和描述 |
|
DIN EN ISO 14691-2002 |
石油和天然气工业.机械动力传输的柔性耦合.一般用途 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text)) |
DIN EN ISO 14692-1-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第1部分:词汇、符号、应用和材料 |
|
DIN EN ISO 14692-1-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第1部分:词汇、符号、应用和材料 |
|
DIN EN ISO 14692-2-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第2部分:合格鉴定和制造 |
|
DIN EN ISO 14692-2-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第2部分:合格鉴定和制造 |
|
DIN EN ISO 14692-3-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第3部分:系统设计 |
|
DIN EN ISO 14692-3-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第3部分:系统设计 |
|
DIN EN ISO 14692-4-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第4部分:制造、安装和操作 |
|
DIN EN ISO 14692-4-2005 |
石油和天然气工业.玻璃纤维增强塑料(GRP)管.第4部分:制造、安装和操作 |
|
DIN EN ISO 14693-2005 |
石油和天然气工业.钻井和油井辅助设备 |
|
DIN EN ISO 14693-2005 |
石油和天然气工业.钻井和油井辅助设备 |
|
DIN EN ISO 14698-1-2004 |
洁净室和相关控制环境.生物污染控制.第1部分:总则和方法 |
|