标准号 |
中文名称 |
英文名称 |
EN ISO 17666-2003 |
航天装置风险经营 |
Space systems - Risk management (ISO 17666:2003) |
EN ISO 177-1999 |
塑料增塑剂分散性的测定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988) |
EN ISO 17708-2003 |
鞋整鞋的试验方法上鞋底粘附力 |
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003) |
EN ISO 17776-2002 |
石油和天然气工业海上生产装置危险识别和风险评定用工具和技术的指南 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000) |
EN ISO 178-2003 |
塑料弯曲性能测定 |
Plastics - Determination of flexural properties (ISO 178:2001) |
EN ISO 17836-2004 |
热喷涂.热喷涂熔敷效率的测定 |
|
EN ISO 179-1-2000 |
塑料摆锤式冲击特性的测定第1部分:非仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000) |
EN ISO 179-2-1999 |
塑料锤式冲击特性的测定第2部分:仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997) |
EN ISO 1797-2-1995 |
牙科旋转器械柄第2部分:塑料柄 |
Dental rotary equipment - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992) |
EN ISO 1798-1999 |
软质泡沫聚合材料拉伸强度和断裂伸长的测定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997) |
EN ISO 17994-2004 |
水质.微生物方法之间的等效性建立标准 |
|
EN ISO 180-2000 |
塑料伊兆特冲击强度的测定 |
Plastics - Determination of Izod impact strength (ISO 180:2000) |
EN ISO 1806-2002 |
渔网网目断裂强力的测定 |
Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002) |
EN ISO 18153-2003 |
体外诊断医疗装置生物样品的定量测量用已知校准器和控制材料确定酶中催化剂浓度值的计量可跟踪性 |
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003) |
EN ISO 182-2-1999 |
塑料基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定第2部分:pH |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990) |
EN ISO 182-3-2000 |
塑料基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定第3部分:电 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993) |
EN ISO 182-4-2000 |
塑料基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定第 4部分:电 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993) |
EN ISO 18273-2004 |
焊接消耗品.铝和铝合金焊接用焊丝电极、焊丝和焊棒.分类 |
|
EN ISO 18274-2004 |
焊接消耗品.镍和镍合金熔焊用实心焊丝、条和棒材.分类 |
|
EN ISO 18278-1-2004 |
电阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定 |
|
EN ISO 18278-2-2004 |
电阻焊.可焊性.第2部分:点焊用薄钢板评定用备用程序 |
|
EN ISO 183-1999 |
塑料着色剂渗析的定性评估 |
Plastics - Qualitative evaluation of the bleeding of colorants (ISO 183:1976) |
EN ISO 18330-2003 |
乳及乳制品抗生素残留量检查用免疫检验或受体检验的标准化描述指南 |
Milk and milk products - Guidelines for a standardized description of immunoassays or receptor assays for the detection of antimicrobial residues (ISO 18330:2003) |
EN ISO 18513-2003 |
旅游服务饭店及其他旅游食宿种类术语 |
Tourism services - Hotels and other types of tourism accommodation - Terminology (ISO 18513:2003) |
EN ISO 1854-1999 |
乳清干酪脂肪含量的测定重量分析法(参照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999) |
EN ISO 1856-2000 |
可素纤维素聚合材料压缩装置测定 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000) |
EN ISO 186-2002 |
纸和纸板测定平均质量的试样的采取 |
Paper and board - Sampling to determine average quality (ISO 186:2002) |
EN ISO 18609-2001 |
动物和植物脂肪和油不可皂化物质的测定乙烷提取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000) |
EN ISO 18613-2003 |
平木托盘的修理 |
Repair of flat wooden pallets (ISO 18613:2003) |
EN ISO 1872-2-1997 |
塑料聚乙烯(PE)模塑和挤塑材料第2部分:试样制备和性能测定 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997) |
EN ISO 1873-1-1995 |
塑料聚丙烯(PP)模塑和挤塑材料第1部分:标识系统和基本规范 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995) |
EN ISO 1874-1-2000 |
塑料聚酰胺(PA)模塑和挤塑材料第1部分:命名 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992) |
EN ISO 1874-2-1995 |
塑料聚酰胺(PA)模塑和挤塑材料第2部分:试样制备和性能测定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995) |
EN ISO 18812-2003 |
健康信息学 临床分析仪与实验室信息系统之间的接口 使用情形 |
Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles (ISO 18812:2003) |
EN ISO 1886-1994 |
增强纤维适用于接收批料的抽样方案 |
Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990) |
EN ISO 1889-1997 |
增强纱线密度的测定 |
Reinforcement yarns - Determination of linear density (ISO 1889:1997) |
EN ISO 1890-1997 |
增强纱捻度的测定 |
Reinforcement yarns - Determination of twist (ISO 1890:1997) |
EN ISO 19011-2002 |
质量和/或环境管理体系审核指南 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002) |
EN ISO 1923-1995 |
泡沫塑料和橡胶线性尺寸的测定 |
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981) |
EN ISO 1924-2-1995 |
纸和纸板拉伸性能的测定第2部分:恒速拉伸法 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (ISO 1924-2:1994) |
EN ISO 1942-5-1994 |
牙医词汇第5部分:与测试有关的术语 |
Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989) |
EN ISO 196-1995 |
锻铜和铜合金残余应力的检测硝酸亚汞试验 |
Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
EN ISO 1969-2004 |
纤维绳索.聚乙烯绳索.3和4股绳索 |
|
EN ISO 1973-1995 |
纺织纤维线密度的测定称重和振动法 |
Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995) |
EN ISO 19900-2002 |
石油和天然气工业海上结构的一般要求 |
Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002) |
EN ISO 19901-4-2003 |
石油和天然气工业海上结构的特殊要求 第4部分:土工技术和基础设计的考虑内容 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003) |
EN ISO 19901-5-2003 |
石油和天然气工业海上结构的特殊要求 第5部分:设计和施工中的重量控制 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003) |
EN ISO 19953-2004 |
鞋靴.鞋跟的试验方法.耐侧面冲击 |
|
EN ISO 19954-2003 |
鞋整鞋的试验方法在家用洗衣机中的可洗性 |
Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003) |
EN ISO 19956-2004 |
鞋靴.鞋跟的试验方法.耐疲劳性 |
|
EN ISO 19957-2004 |
鞋靴.鞋跟的试验方法.鞋跟钉的保持力 |
|
EN ISO 19958-2004 |
鞋靴.鞋跟和顶部的试验方法.顶部保持力 |
|
EN ISO 2009-1994 |
开槽沉头螺钉(通用头型)产品等级A |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994) |
EN ISO 2010-1994 |
开槽半沉头螺钉(通用头型)产品等级A |
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994) |
EN ISO 20344-2004 |
个人防护设备.鞋靴的试验方法 |
|
EN ISO 20345-2004 |
个人防护设备.安全鞋靴 |
|
EN ISO 20346-2004 |
个人防护设备.防护鞋 |
|
EN ISO 20347-2004 |
个人防护设备.专业鞋 |
|
EN ISO 2039-1-2003 |
塑料硬度测定第1部分:压球法 |
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
EN ISO 2039-2-1999 |
塑料硬度测定第2部分:洛氏硬度 |
Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
EN ISO 20482-2003 |
金属材料板材及带材伊利森(Erichsen)压杯试验 |
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003) |
EN ISO 2060-1995 |
纺织品卷装纱用绞纱法测定线密度(单位长度的质量) |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
EN ISO 2061-1995 |
纺织品纱线捻度的测定直接计数法 |
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:1995) |
EN ISO 2062-1995 |
纺织品从包装抽取纱线单端断裂力和断裂伸长的测定 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993) |
EN ISO 2064-2000 |
金属和其他无机覆盖层厚度测量的定义和一般要求 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
EN ISO 20645-2004 |
纺织织物.抗菌活性的测定.琼脂扩散木片试验 |
|
EN ISO 20763-2004 |
石油和相关产品.液压液耐磨性能的测定.叶片泵法 |
|
EN ISO 20823-2003 |
石油和石油产品 与热表面接触时流体的易燃特性的测定 多种形式的点燃试验 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surface (ISO 20823-2003) |
EN ISO 20843-2003 |
石油及石油产品HFA(六氟丙酮)HFAS和HFC流体中阻燃液PH值的测定 |
Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003) |
EN ISO 20844-2004 |
石油及其相关产品.利用柴油喷射器嘴测定含聚合物油的剪切稳定性 |
|
EN ISO 20846-2004 |
石油产品.机动车燃料中硫含量的测定.紫外线荧光法 |
|
EN ISO 20847-2004 |
石油产品.机动车燃料中硫含量的测定.能量分散X射线荧光光谱法 |
|
EN ISO 20884-2004 |
石油产品.机动车燃料中硫含量的测定.波长分散X射线荧光光谱法 |
|
EN ISO 21049-2004 |
泵.离心和旋转泵用轴密封系统 |
|
EN ISO 2114-2000 |
塑料(聚酯树脂)、色漆和清漆(胶粘合剂)部分酸值和总酸值的测定 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000) |
EN ISO 21227-1-2003 |
油漆和清漆用光学成像法评价涂漆表面的缺陷第1部分:一般指南 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
EN ISO 21269-2004 |
带米制精细齿距螺纹的六角凹头螺钉 |
|
EN ISO 21329-2004 |
石油和天然气工业.管道运输系统.机械连接器的试验过程 |
|
EN ISO 2151-2004 |
声学.压缩机和真空泵用噪音试验规程.工程法(2级) |
|
EN ISO 21530-2004 |
牙科学.牙科器械表面用材料.耐化学消毒剂的测定 |
|
EN ISO 21533-2003 |
牙科学可反复使用的牙韧带注射 器 |
Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003) |
EN ISO 21549-1-2004 |
医疗信息学.病人健康卡数据.第1部分:通用结构 |
|
EN ISO 21549-2-2004 |
医疗信息学.病人健康卡数据.第2部分:通用对象 |
|
EN ISO 21549-3-2004 |
医疗信息学.病人健康卡数据.第3部分:受限的临床数据 |
|
EN ISO 21567-2004 |
食品和动物饲料的微生物学.志贺氏杆菌检测的水平法 |
|
EN ISO 2157-1995 |
牙科旋转器械公称直径和命名代码 |
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992) |
EN ISO 21572-2004 |
食品.转基因有机物和衍生产品的检测方法.基于蛋白质的方法 |
|
EN ISO 216-2001 |
书写纸和某些印刷纸裁切后尺寸A和B系列 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216:1975) |
EN ISO 2160-1998 |
石油产品对铜的腐蚀性铜片腐蚀试验 |
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
EN ISO 2162-1-1996 |
技术产品文件弹簧第1部分:简化表示法 |
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993) |
EN ISO 2162-2-1996 |
技术产品文件弹簧第2部分:圆柱螺旋形压力弹簧数据的表示 |
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993) |
EN ISO 2162-3-1996 |
技术产品文件弹簧第3部分:词汇 |
Technical product documentation - Springs - Part 3: Vocabulary (ISO 2162-3:1993) |
EN ISO 21647-2004 |
医用电气设备.呼吸气监测器的基本安全和性能的特殊要求 |
|
EN ISO 21670-2003 |
带凸缘的六角焊接螺母 |
Hexagon weld nuts with flange (ISO 21670:2003) |
EN ISO 2177-1994 |
金属覆盖层覆盖层厚度测量阳极溶解库仑法 |
Metallic coatings - Measurement of coating thickness - Coulometer method by anodic dissolution (ISO 2177:1985) |
EN ISO 2177-2004 |
金属镀层.镀层厚度的测量.阳极分解的电量计法 |
|
EN ISO 2178-1995 |
磁性机体上的非磁性覆盖层覆盖层厚度的测量磁性法 |
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982) |
EN ISO 2203-1997 |
技术制图齿轮的习惯画法 |
Technical drawings - Conventional representation of gears (ISO 2203:1973) |
EN ISO 2231-1995 |
橡胶或塑料涂覆织物状态调节和试验的标准环境 |
Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
EN ISO 2233-2001 |
包装满装的运输包装和单货物试验条件 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000) |
EN ISO 2234-2002 |
包装 满装运输包装和单件货物 静载荷法堆积试验 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000) |
EN ISO 2244-2002 |
包装 满装运输包装和单件货物 水平冲击试验 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000) |
EN ISO 2247-2002 |
包装 满装运输包装和单件货物 固定低频振动试验 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000) |
EN ISO 228-1-2003 |
非螺纹密封的管螺纹第1部分:标记、尺寸和公差 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN ISO 228-2-2003 |
非螺纹密封的管螺纹第2部分:用极限量规检验 |
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
EN ISO 2286-1-1998 |
橡胶或塑料涂覆织物整卷特性测定第1部分:长度、宽度和净重的测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998) |
EN ISO 2286-2-1998 |
橡胶或塑料涂覆织物整卷特性测定第2部分:单位面积总质量、单位面积涂胶量和衬底单位面积质量的测定方 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998) |
EN ISO 2286-3-1998 |
橡胶或塑料涂覆织物整卷特性测定第3部分:厚度测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998) |
EN ISO 2320-1997 |
有效力矩型钢六角锁紧螺母机械和工作性能 |
Prevailing torque type steel hexagon nuts - Mechanical and performance requirements (ISO 2320:1997) |
EN ISO 2338-1997 |
不淬硬钢和奥氏体不锈钢圆锥销 |
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
EN ISO 23429-2004 |
六角凹头量规 |
|
EN ISO 2360-1995 |
非磁性基金属上非导电涂层镀层厚度的测量涡流法 |
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982) |
EN ISO 2361-1995 |
磁性和非磁性基体上的镍电度层镀层厚度的测量磁性法 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
EN ISO 2398-1997 |
织物增强的压缩空气用橡胶软管规范 |
Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) |
EN ISO 2409-1994 |
色漆和清漆划格试验 |
Paints and varnishes - Cross-cut test (ISO 2409:1992) |
EN ISO 2411-2000 |
橡胶或塑料涂覆织物涂层粘合强度的测定 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000) |
EN ISO 2417-2002 |
皮革物理与机械性的试验静态吸水性的测定 |
Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2002) |
EN ISO 2418-2002 |
皮革化学、物理和机械性与色牢度的测试取样部位 |
Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002) |
EN ISO 2419-2002 |
皮革物理与机械性的试验样品准备和调节 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2002) |
EN ISO 2420-2002 |
皮革物理与机械性的试验视密度的测定 |
Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002) |