标准号 |
中文名称 |
英文名称 |
BS ISO 4020-2002 |
道路车辆.柴油发动机的燃油滤清器.试验方法 |
Road vehicles - Fuel filters for diesel engines.Test methods |
BS ISO 4037-1-1998 |
校准剂量计和剂量强度计及测定充作为光子函数的灵敏度用的X 和γ标准辐射.第1部分:辐射性产生法 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Radiation characteristics and production methods |
BS ISO 4037-2-1998 |
校准剂量计和剂量强度计及测定充作为光子函数的灵敏度用的X 和γ标准放射源.能量范围在8KeV-1,3MeV和4MeV-9MeV辐射保护用剂量学 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Dosimetry for radiation protection over the energy ranges 8 keV to 1, 3 MeV and 4 MeV to 9 MeV |
BS ISO 4037-3-1999 |
校准剂量计和剂量强度计及测定充作为光子函数的灵敏度用的X 和γ标准辐射.第1部分:辐射性产生法 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Calibration of area and personal dosemeters and the measurement of their response as a function of energy an |
BS ISO 4037-4-2004 |
校准剂量仪和剂量率仪及确定其光子能量响应的Χ和γ参考辐射.低能X参考辐射场中场所剂量计和个人剂量计的校准 |
|
BS ISO 4037-4-2004 |
校准剂量仪和剂量率仪及确定其光子能量响应的Χ和γ参考辐射.低能X参考辐射场中场所剂量计和个人剂量计的校准 |
|
BS ISO 4046-1-2003 |
纸、纸板、纸浆及其术语.词汇.按字母顺序排列的索引 |
Paper, board, pulps and related terms - Vocabulary - Alphabetical index |
BS ISO 4046-2-2003 |
纸、纸板、纸浆及其术语.词汇.打浆术语 |
Paper, board, pulps and related terms - Vocabulary - Pulping terminology |
BS ISO 4046-3-2003 |
纸、纸板、纸浆及其术语.词汇.造纸术语 |
Paper, board, pulps and related terms - Vocabulary - Paper-making terminology |
BS ISO 4046-4-2003 |
纸、纸板、纸浆及其术语.词汇.纸和纸板的等级和加工产品 |
Paper, board, pulps and related terms - Vocabulary - Paper and board grades and converted products |
BS ISO 4046-5-2003 |
纸、纸板、纸浆及其术语.词汇.纸浆、纸和纸板的特性 |
Paper, board, pulps and related terms - Vocabulary - Properties of pulp, paper and board |
BS ISO 4057-1992 |
信息处理.63字节/mm(1600字节/in)相位编码式宽6.3mm(0.25in)盒式磁带的数据交换 |
Information processing - Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded |
BS ISO 406-2000 |
技术图纸.直线和角度的尺寸公差 |
Technical drawings - Tolerancing of linear and angular dimensions |
BS ISO 4064-2-2001 |
封闭管道中水流量的测量.饮用冷水测量计.安装要求和选择 |
Measurement of water flow in closed conduits - Meters for cold potable water - Installation requirements and selection |
BS ISO 4065-1997 |
热塑塑料管.通用管壁厚度表 |
Thermoplastics pipes - Universal wall thickness table |
BS ISO 4087-1991 |
缩微摄影.档案用35mm缩微胶片上的报纸缩微摄影 |
Micrographics - Microfilming of newspapers for archival purposes on 35 mm microfilm |
BS ISO 4087-2005 |
缩微摄影技术.35mm缩微胶片存档用报纸的缩微摄影 |
|
BS ISO 4090-2001 |
摄影.医疗放射照相用X光底片盒/屏蔽物/胶片和硬拷贝成像胶片.尺寸和规范 |
Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications |
BS ISO 4093-2000 |
柴油发动机.喷油泵.试验用高压管 |
Diesel engines - Fuel injection pumps - High-pressure pipes for testing |
BS ISO 4096-2001 |
香精油(包括叔醇).用测定冷态甲酰化后的酯化值法测定游离醇含量 |
Essential oils (containing tertiary alcohols) - Evaluation of free alcohols content by determination of ester value after cold formylation |
BS ISO 4097-2001 |
乙丙烯二烯烃橡胶(EPDM).评定规程 |
Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure |
BS ISO 4115-1998 |
空中货运设备.空中/地面用托盘网 |
Air cargo equipment - Air/land pallet nets |
BS ISO 4120-2004 |
感官分析.方法学.三角试验 |
|
BS ISO 4121-2003 |
感官分析.定量反应秤的使用指南 |
(Sensory analysis - Guidelines for the use of quantitative response scales) |
BS ISO 4138-2004 |
道路车辆.恒速环行驾驶.开环试验方法 |
|
BS ISO 4148-2004 |
道路车辆.专用警示信号灯.尺寸 |
|
BS ISO 4149-2005 |
生咖啡.嗅觉和视觉检验及对杂质和缺陷的测定 |
|
BS ISO 4161-1999 |
带法兰的六角螺母.粗螺纹 |
Hexagon nuts with flange - Coarse thread |
BS ISO 4168-2002 |
时间计量仪表.辐射发光沉积检验条件 |
Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits |
BS ISO 4179-2005 |
压力和非压力管道用球墨铸铁管和配件.水泥灰浆内衬 |
|
BS ISO 418-2002 |
摄影.冲洗用药液.无水亚硫酸钠规范 |
Photography - Processing chemicals - Specifications for anhydrous sodium sulfite |
BS ISO 4190-1-2002 |
电梯安装.I、II、III和VI类电梯 |
Lift (US: Elevator) installation - Class I, II, III and VI lifts |
BS ISO 4190-2-2002 |
电梯安装.Ⅳ类电梯 |
Lift (US: Elevator) installation - Class IV lifts |
BS ISO 420-1995 |
摄影技术.摄影材料加工用化学药品.溴化钾规范 |
Photography - Processing chemicals - Specifications for potassium bromide |
BS ISO 422-1995 |
摄影技术.摄影材料加工用化学药品.对接甲基氨基苯酚硫酸盐规范 |
Photography - Processing chemicals - Specifications for p-methylaminophenol sulfate |
BS ISO 423-1995 |
摄影技术.摄影材料加工用化学药品.对苯二酚规范 |
Photography - Processing chemicals - Specification for hydroquinone |
BS ISO 424-1995 |
摄影技术.处理用化学药品.无水碳酸钠和碳酸钠一水化物的规范 |
Photography - Processing chemicals - Specification for anhydrous sodium carbonate and sodium carbonate monohydrate |
BS ISO 4241-1996 |
电影技术.35mm和16mm发行拷贝的片头和片尾.规范 |
Cinematography - Leaders and run-out trailers for 35 mm and 16 mm release prints - Specifications |
BS ISO 4241-2003 |
电影.电影院放映片头、片尾和换机标记.规范 |
(Cinematography - Theatre projection leader, trailer and cue marks - Specifications) |
BS ISO 4246-1995 |
电影技术.词汇 |
Cinematography - Vocabulary |
BS ISO 4249-3-2005 |
摩托车轮胎和轮辋(代号规格系列).轮辋 |
|
BS ISO 4266-1-2002 |
石油和液态石油产品.用自动法测定储罐中温度和液面.气罐的液面测量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks |
BS ISO 4266-2-2002 |
石油和液态石油产品.用自动法测定储罐中温度和液面.船用容器的液面测量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in marine vessels |
BS ISO 4266-3-2002 |
石油和液态石油产品.用自动法测定储罐中温度和液面.加压储罐的液面测量(非冷却的) |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in pressurized storage tanks (non-refrigerated) |
BS ISO 4266-4-2002 |
石油和液态石油产品.用自动法测定储罐中温度和液面.气罐温度的测量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks |
BS ISO 4266-5-2002 |
石油和液态石油产品.用自动法测定储罐中温度和液面.船用容器温度的测量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in marine vessels |
BS ISO 4266-6-2002 |
石油和液态石油产品.用自动法测定储罐中温度和液面.加压储罐温度的测量(非冷却的) |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in pressurized storage tanks (non-refrigerated) |
BS ISO 4268-2000 |
石油和液化石油产品.温度测量.手工方法 |
Petroleum and liquid petroleum products - Temperature measurements - Manual methods |
BS ISO 4269-2001 |
石油和液化石油产品.通过液体测量进行油箱校准.使用容积测量仪的递增法 |
Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters |
BS ISO 4308-1-2003 |
起重机和提升设备.钢丝绳的选用.总则 |
(Cranes and lifting appliances - Selection of wire ropes - General) |
BS ISO 4309-2004 |
起重机.金属丝绳.保养、维修、安装、检查和报废 |
|
BS ISO 4365-2005 |
明渠水流.河、河渠泥沙.含沙量、粒度分布和相对密度的测定 |
|
BS ISO 4375-2001 |
流体比重测定.用于水流水文测量的索道装置 |
Hydrometric determinations - Cableway systems for stream gauging |
BS ISO 4377-2002 |
比重测定.使用构造物的明渠液体流量测量.V形平面溢流堰 |
Hydrometric determinations - Flow measurement in open channels using structures - Flat-V weirs |
BS ISO 4381-2000 |
滑动轴承.多层滑动轴承用铅锡铸造合金 |
Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
BS ISO 4383-2000 |
滑动轴承.薄壁滑动轴承用多层材料 |
Plain bearings - Multilayer materials for thin-walled plain bearings |
BS ISO 4384-1-2000 |
滑动轴承.轴承合金的硬度试验.复合材料 |
Plain bearings - Hardness testing of bearing metals - Compound materials |
BS ISO 4392-1-2002 |
液压传动.发动机特性测定.在恒低速和常压下 |
Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure |
BS ISO 4392-2-2002 |
液压传动.发动机特性测定.稳定性 |
Hydraulic fluid power - Determination of characteristics of motors - Startability |
BS ISO 4401-1996 |
液压传动.四油口定向控制阀.装配面 |
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
BS ISO 4404-1-2002 |
石油和相关产品.耐火液压液耐腐蚀性测定.含水液体 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids |
BS ISO 4404-1998 |
石油和相关产品.液压系统用含水耐火液体的耐腐蚀性测定 |
Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
BS ISO 4406-2000 |
液压传动.流体.固体微粒污染分级编码法 |
Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles |
BS ISO 4407-2002 |
液压传动.液压液污染.用光学显微镜计数法测定粒状物污染 |
Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope |
BS ISO 4413-1998 |
液压传动.与系统相关的一般规则 |
Hydraulic fluid power - General rules relating to systems |
BS ISO 4414-1998 |
气压传动.与系统相关的一般规则 |
Pneumatic fluid power - General rules relating to systems |
BS ISO 4433-1-1998 |
热塑管.耐液体化学药品的性能.分类.第1部分:浸入试验 |
Thermoplastic pipes - Resistance to liquid chemicals - Classification - Immersion test method |
BS ISO 4433-2-1998 |
热塑管.耐液体化学药品的性能.分类.第2部分:聚烯烃管 |
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Polyolefin pipes |
BS ISO 4433-3-1998 |
热塑管.耐液体化学药品的性能.分类.第3部分:未增塑聚氯乙烯(PVC-U),耐冲性聚氯乙烯(PVC-HI)和氯化聚氯乙烯(PVC-C)管 |
Thermoplastic pipes - Resistance to liquid chemicals - Classification - Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes |
BS ISO 4433-4-1998 |
热塑管.耐液体化学药品的性能.分类.第4部分:聚偏氟乙烯管 |
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Poly(vinylidene fluoride) (PVDF) pipes |
BS ISO 449-1997 |
造船和航海技术.A级磁罗盘、罗盘座和方位阅读装置 |
Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class A |
BS ISO 4507-2000 |
烧结铁类材料.渗碳或碳氮共渗.用微型硬度测试法测定和验证外层淬火的深度 |
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test |
BS ISO 4512-2001 |
石油和液态石油产品.储油罐中液位的测量设备.人工法 |
Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods |
BS ISO 4524-2-2000 |
金属镀层.金及金合金电镀层的试验方法.混合流动气体(MFG)环境试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Mixed flowing gas (MFG) environmental tests |
BS ISO 4525-2003 |
金属镀层.塑料材料上的镍加铬电镀层 |
Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials |
BS ISO 4528-2000 |
上釉和瓷釉精整.物品上釉和涂以瓷釉面积的试验方法的选择 |
Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelein enamelled areas of articles |
BS ISO 4587-2003 |
粘合剂.刚性对刚性的粘接组件拉伸搭接剪切强度的测定 |
(Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies) |
BS ISO 4589-1-1997 |
塑料.通过氧指数测定其燃烧性.第1部分:总则 |
Plastics. Determination of burning behaviour by oxygen index. Guidance |
BS ISO 4602-1998 |
增强材料.机织物.整经和整纬单长度纱的数量测定 |
Reinforcements - Woven fabrics - Determination of number of yarns per unit length of warp and weft |
BS ISO 4603-1996 |
纺织玻璃纤维.织物.厚度的测定 |
Textile glass - Woven fabrics - Determination of thickness |
BS ISO 4606-1995 |
纺织玻璃纤维.织物.用条法测定断裂张力和断裂伸长 |
Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
BS ISO 4619-1998 |
色漆和清漆用干燥剂 |
Driers for paints and varnishes |
BS ISO 4625-1-2005 |
色漆和清漆用粘合剂.软化点的测定.环和球法 |
|
BS ISO 4625-1-2005 |
色漆和清漆用粘合剂.软化点的测定.环和球法 |
|
BS ISO 4625-2-2005 |
色漆和清漆用粘合剂.软化点的测定.杯和球法 |
|
BS ISO 4639-2-1996 |
内燃机燃料管路用橡胶管和软管.规范.第2部分:已氧化燃料 |
Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Oxygenated fuels |
BS ISO 4639-3-1996 |
内燃机燃料管路用橡胶管和软管.规范.第3部分:被氧化的燃料 |
Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Oxidized fuels |
BS ISO 464-1995 |
滚动轴承.有弹簧固定环的径向轴承尺寸 |
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances |
BS ISO 4649-2002 |
硫化或热塑性橡胶.用旋转滚筒装置测定耐磨性 |
(Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device) |
BS ISO 4658-2000 |
丙烯腈一丁二烯橡胶(NBR).评定过程 |
Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure |
BS ISO 4659-2003 |
苯乙烯-丁二烯橡胶(炭黑或炭黑和油母炼胶).评价方法 |
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure |
BS ISO 4660-2000 |
天然生橡胶.颜色指数试验 |
Rubber, raw natural - Colour index test |
BS ISO 4664-1-2005 |
硫化或热塑性橡胶.动态性能的测定.通用指南 |
|
BS ISO 4664-1998 |
橡胶.动态性能测定指南 |
Rubber - Guide to the determination of dynamic properties |
BS ISO 4665-2001 |
硫化和热塑橡胶.耐风化能力 |
Rubber, vulcanized and thermoplastic - Resistance to weathering |
BS ISO 4689-2-2004 |
铁矿石.硫含量的测定.燃烧和滴定法 |
|
BS ISO 4689-3-2004 |
铁矿石.硫含量的测定.燃烧和红外线法 |
|
BS ISO 4695-1996 |
铁矿石.还原性的测定 |
Iron ores - Determination of reducibility |
BS ISO 4698-1995 |
铁矿石颗粒.自由膨胀指数测定 |
Iron ore pellets - Determination of relative free-swelling index |
BS ISO 4703-2001 |
双柱式平面磨床的验收条件.导轨磨床.精度试验 |
Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy |
BS ISO 4708-2000 |
复合软木.填料.试验方法 |
Composition cork - Gasket material - Test methods |
BS ISO 4709-2001 |
复合软木.垫圈材料.分类体系、要求、取样、包装和标记 |
Composition cork - Gasket material - Classification system, requirements, sampling, packing and marking |
BS ISO 4710-2000 |
发泡的酒类和充气的酒类的圆柱形软木瓶塞.特性 |
Cork - Cylindrical stoppers for sparkling wines and gasified wines - Characteristics |
BS ISO 4714-2000 |
复合软木.规范、抽样、包装和作标记 |
Composition cork - Specifications, sampling, packaging and marking |
BS ISO 4715-2001 |
香精油.蒸发后残渣的定量测定 |
Essential oils - Quantitative evaluation of residue on evaporation |
BS ISO 4718-2004 |
柠檬草油(香茅属锯齿状的) |
|
BS ISO 4718-2004 |
柠檬草油 |
|
BS ISO 472-2000 |
塑料.词汇 |
Plastics. Vocabulary |
BS ISO 4720-2000 |
香精油.命名 |
Essential oils - Nomenclature |
BS ISO 4724-2004 |
弗吉尼亚柏木油 |
|
BS ISO 4724-2004 |
弗吉尼亚柏木油 |
|
BS ISO 4725-2004 |
得克萨斯柏木油 |
|
BS ISO 4725-2004 |
得克萨斯柏木油 |
|
BS ISO 4728-2003 |
西班牙野生牛至菜油 |
(Oil of Spanish wild marjoram (Thymus mastichina L.)) |
BS ISO 4730-2004 |
白千层油.对孟烯-1-醇-4型(茶树油) |
|
BS ISO 4730-2004 |
白千层油.萜品醇-1-醇-4型(茶树油) |
|
BS ISO 4733-2004 |
小豆寇油 |
|
BS ISO 4733-2004 |
小豆寇油 |
|
BS ISO 4782-1998 |
工业金属丝网筛和金属丝筛布用金属丝规范 |
Specification for metal wire for industrial wire screens and woven wire cloth |
BS ISO 4795-1997 |
实验室玻璃器皿.温度计球头用玻璃 |
Laboratory glassware - Glass for thermometer bulbs |