标准号 |
中文名称 |
英文名称 |
| ISO 2772-2-1974 |
箱型立式钻床的验收条件.精度试验.第2部分:实用试验 |
(Test conditions for box type vertical drilling machines; Testing of the accuracy; Part II : Practical test) |
| ISO 2773-1-1973 |
柱型立式钻床的检验条件.精度试验.第1部分:几何参数试验 |
(Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part I : Geometrical tests) |
| ISO 2773-2-1973 |
柱型立式钻床的检验条件.精度试验.第2部分:实用试验 |
(Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part II : Practical test) |
| ISO 2775-1977 |
用于信息处理的办公用计算机和打印机.一次性用带或塑料的打印色带宽度及指示色带终端的标志 |
(Office machines and printing machines used for information processing; Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons) |
| ISO 2776-1974 |
模数协调.门组装装置的协调尺寸.外屋门装置和内屋门装置 |
(Modular co-ordination; Co-ordinating sizes for doorsets; External and internal) |
| ISO 2777-1974 |
模数协调.用于建筑物中的刚性平面板材的协调尺寸 |
(Modular co-ordination; Co-ordinating sizes for rigid flat sheet boards used in building) |
| ISO 2780-1986 |
榫传动铣刀.铣刀杆的互换性尺寸.米制系列 |
(Milling cutters with tenon drive; Interchangeability dimensions with cutter arbors; Metric series) |
| ISO 2781 Technical Corrigendum 1-1996 |
硫化橡胶.密度的测定.技术勘误表1 |
(Rubber, vulcanized - Determination of density; Technical Corrigendum 1) |
| ISO 2781-1988 |
硫化橡胶.密度的测定 |
(Rubber, vulcanized; determination of density) |
| ISO 2782-1995 |
硫化橡胶或热塑性.气体渗透性的测定 |
(Rubber, vulcanized or thermoplastic - Determination of permeability to gases) |
| ISO 2784-1974 |
用于信息处理的连续形式.尺寸和输送孔 |
(Continuous forms used for information processing; Sizes and sprocket feed holes) |
| ISO 2785-1986 |
有内压或无内压,而有外部负荷的石棉水泥管选择指导 |
(Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure) |
| ISO 2787-1984 |
旋转冲击式风动工具.性能试验 |
(Rotary and percussive pneumatic tools; performance tests) |
| ISO 2788-1986 |
文献工作.单语种主题词表编制导则 |
(Documentation; Guidelines for the establishment and development of monolingual thesauri) |
| ISO 2789-2003 |
情报和文献.国际图书馆统计学 |
(Information and documentation - International library statistics) |
| ISO 2789-2003 |
情报和文献.国际图书馆统计学 |
|
| ISO 279-1998 |
香精油.在20℃时相对比重的测定(参照法) |
(Essential oils - Determination of relative density at 20 鳦 - Reference method) |
| ISO 2790-1989 |
皮带传动.汽车工业用窄V型皮带和皮带轮.尺寸 |
(Belt drives; narrow V-belts for the automotive industry and corresponding pulleys; dimensions) |
| ISO 2790-2004 |
带传动.汽车工业用V带及带轮.尺寸 |
|
| ISO 2790-2004 |
带传动.汽车工业用V带及带轮.尺寸 |
|
| ISO 2795-1991 |
滑动轴承.烧结的轴瓦.尺寸和公差 |
(Plain bearings; sintered bushes; dimensions and tolerances) |
| ISO 2796-1986 |
硬质泡沫塑料.尺寸稳定性试验 |
(Cellular plastics, rigid; Test for dimensional stability) |
| ISO 2797-1986 |
纺织玻璃纤维.粗纱.规范的基础 |
(Textile glass; Rovings; Basis for a specification) |
| ISO 28-1976 |
电影技术.8mmR型电影胶片电影摄影机的用法.规范 |
(Cinematography; Camera usage of 8 mm Type R motion-picture film; Specifications) |
| ISO 280-1998 |
香精油.折光率的测定 |
(Essential oils - Determination of refractive index) |
| ISO 2800-1973 |
摄影技术.一次使用的照相闪光灯泡.定义和闪光效率的评定 |
(Photography; Expendable photoflash lamps; Definition and evaluation of flashability) |
| ISO 2801-1998 |
防热和防火服.防护服的选择、保存和使用的一般推荐规程 |
(Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing) |
| ISO 2804-1996 |
线,棒或管材拉模用硬质合金烧结片.尺寸 |
(Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions) |
| ISO 2806-1994 |
工业自动化系统.数控机床词汇 |
(Industrial automation systems - Numerical control of machines - Vocabulary) |
| ISO 2808-1997 |
涂料和清漆.漆膜厚度的测定 |
(Paints and varnishes - Determination of film thickness) |
| ISO 281 AMD 1-2000 |
滚动轴承.动力荷载额定值和额定寿命.修改件1 |
(Rolling bearings - Dynamic load ratings and rating life; Amendment 1) |
| ISO 281 AMD 2-2000 |
滚动轴承.动力荷载额定值和额定寿命.修改件2:寿命改进因子A(上标xyz) |
(Rolling bearings - Dynamic load ratings and rating life; Amendment 2: Life modification factor a) |
| ISO 281-1990 |
滚动轴承.动力荷载值和额定寿命 |
(Rolling bearings; dynamic load ratings and rating life) |
| ISO 2810-1974 |
色漆和清漆.自然老化试验指导解释 |
(Paints and varnishes; Notes for guidance on the conduct of natural weathering tests) |
| ISO 2810-2004 |
色漆与清漆.涂层的自然风化.暴露和评定 |
|
| ISO 2811-1-1997 |
涂料和清漆.密度的测定.第1部分:比重瓶法 |
(Paints and varnishes - Determination of density - Part 1: Pyknometer method) |
| ISO 2811-2-1997 |
涂料和清漆.密度的测定.第2部分:潜体法 |
(Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method) |
| ISO 2811-3-1997 |
涂料和清漆.密度的测定.第2部分:潜体法 |
(Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method) |
| ISO 2811-4-1997 |
涂料和清漆.密度的测定.第4部分:压力杯法 |
(Paints and varnishes - Determination of density - Part 4: Pressure cup method) |
| ISO 2812-1-1993 |
色漆和清漆.耐液体性测定.第1部分:总方法 |
(Paints and varnishes; determination of resistance to liquids; part 1: general methods) |
| ISO 2812-2-1993 |
色漆和清漆.耐液体性测定.第2部分:浸液法 |
(Paints and varnishes; determination of resistance to liquids; part 2: water immersion method) |
| ISO 2813 Technical Corrigendum 1-1997 |
色漆和清漆.非金属漆膜镜面在20℃,60℃和85℃时光泽的测定.技术勘误表1 |
(Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20, 60 und 85; Technical Corrigendum 1) |
| ISO 2813-1994 |
涂料和清漆.非金属漆膜镜面在20℃、60℃和85℃时光泽的测定 |
(Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees und 85 degrees) |
| ISO 2814-1973 |
色漆和清漆.同一类型和颜色的色漆比色对比率(遮盖力) |
(Paints and varnishes; Comparison of contrast ratio (hiding power) of paints of the same type and colour) |
| ISO 2815-2003 |
色漆和清漆.布考耳兹(Buchholz)压痕试验 |
(Paints and varnishes - Buchholz indentation test) |
| ISO 2815-2003 |
色漆和清漆.布考耳兹(Buchholz)压痕试验 |
|
| ISO 2816-1973 |
统一鞋号制的基本特性 |
(Fundamental characteristics of a system of shoe sizing to be known as Mondopoint) |
| ISO 2817-1999 |
烟草和烟草制品.溶于盐酸的硅含量的测定 |
(Tobacco and tobacco products - Determination of silicated residues insoluble in hydrochloric acid) |
| ISO 2818-1994 |
塑料.试样的机加工制备 |
(Plastics - Preparation of test specimens by machining) |
| ISO 2819-1980 |
金属基质上的金属镀层.电镀层和化学沉积层.试验附着力的方法述评 |
(Metallic coatings on metallic substrates; Electrodeposited and chemically deposited coatings; Review of methods available for testing adhesion) |
| ISO 282-1992 |
输送带.取样 |
(Conveyor belts; sampling) |
| ISO 2820 AMD 1-1996 |
皮革.生牛皮和生马皮的修整方法.修改件1 |
(Leather - Raw hides of cattle and horses - Method of trim; Amendment 1) |
| ISO 2820-1974 |
皮革.生牛皮和生马皮的修整方法 |
(Leather; Raw hides of cattle and horses; Method of trim) |
| ISO 2821 AMD 1-1996 |
皮革.生牛皮和生马皮的盐腌防腐.修改件1 |
(Leather - Raw hides of cattle and horses - Preservation by stack salting; Amendment 1) |
| ISO 2821-1974 |
皮革.生牛皮和生马皮的盐腌防腐 |
(Leather; Raw hides of cattle and horses; Preservation by stack salting) |
| ISO 2822-1-1998 |
生牛皮和小牛皮.第1部分:缺陷的描述 |
(Raw cattle hides and calf skins - Part 1: Descriptions of defects) |
| ISO 2825-1981 |
香料和调味品.分析用粉状样品的制备 |
(Spices and condiments; Preparation of a ground sample for analysis) |
| ISO 2826-1974 |
杏.冷藏指南 |
(Apricots; Guide to cold storage) |
| ISO 2827-1988 |
摄影.电子闪光装置的光输出量和性能的测定 |
(Photography; electronic flash equipment; determination of light output and performance) |
| ISO 2828-1973 |
金属铝生产用氧化铝.氟含量的测定.茜素配位酮和氯化镧分光光度法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of fluorine content; Alizarin complexone and lanthanum chloride spectrophotometric method) |
| ISO 2829-1973 |
金属铝生产用氧化铝.磷含量的测定.还原磷钼酸盐分光光度法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method) |
| ISO 283-1-2000 |
织物传送带.全厚度拉伸试验.第1部分:断裂伸长和参考负荷伸长时拉伸强度的测定 |
(Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load) |
| ISO 283-1990 |
输送带.全厚度抗拉强度和伸长.规范和试验方法 |
(Conveyor belts; full thickness tensile strength and elongation; specifications and method of test) |
| ISO 2830-1973 |
天然和人造冰晶石.铝含量的测定.原子吸收光度法 |
(Cryolite, natural and artificial; Determination of aluminium content; Atomic absorption method) |
| ISO 2831-1973 |
工业用氟化钠.不溶于水的物质含量的测定 |
(Sodium fluoride for industrial use; Determination of water-insoluble matter) |
| ISO 2832-1973 |
工业用氟化钠.水含量的测定 |
(Sodium fluoride for industrial use; Determination of moisture content) |
| ISO 2833-1973 |
工业用氟化钠.氟含量的测定.威拉德-温特尔(Willard-Winter)改进法 |
(Sodium fluoride for industrial use; Determination of fluorine content; Modified Willard-Winter method) |
| ISO 2834 Technical Corrigendum 1-2003 |
印刷技术.用于胶印和凸印油墨测试印样的制备.技术勘误1 |
(Graphic technology - Test print preparation for offset and letterpress inks; Technical Corrigendum 1) |
| ISO 2834 Technical Corrigendum 1-2003 |
印刷技术.用于胶印和凸印油墨测试印样的制备.技术勘误1 |
|
| ISO 2834-1999 |
印刷技术.胶印压印墨水的试验印刷准备 |
(Graphic technology - Test print preparation for offset and letterpress inks) |
| ISO 2835-1974 |
印刷品和油墨.耐光性的评定法 |
(Prints and printing inks; Assessment of light fastness) |
| ISO 2836-1999 |
印刷技术.印刷品和油墨.对各种药剂耐性的评价 |
(Graphic technology - Prints and printing inks - Assessment of resistance to various agents) |
| ISO 2836-2004 |
印刷技术.印刷品和印刷油墨.印刷品耐各种试剂性的评定 |
|
| ISO 2837-1996 |
图象技术.印刷品和油墨.耐溶剂性的评定法 |
(Graphic technology - Prints and printing inks - Assessment of resistance to solvents) |
| ISO 284-2003 |
输送带.导电率.规范和试验方法 |
(Conveyor belts - Electrical conductivity - Specification and test method) |
| ISO 284-2003 |
输送带.导电率.规范和试验方法 |
|
| ISO 2846-1-1997 |
印刷技术.四色印刷油墨的色彩和透明度.第1部分:纸张输进和热量系统卷筒分支平板印刷 |
(Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 1: Sheet-fed and heat-set web offset lithographic printing) |
| ISO 2846-2-2000 |
印刷技术.四色印刷油墨的颜色和透明度.第2部分:冷固型油墨胶印 |
(Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 2: Coldset offset lithographic printing) |
| ISO 2846-3-2002 |
印刷技术.四色印刷油墨的颜色和透明度.第3部分:书刊凹版印刷 |
(Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 3: Publication gravure printing) |
| ISO 2846-4-2000 |
印刷技术.四色印刷油墨的色彩和透明度.第4部分:网板印刷 |
(Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 4: Screen printing) |
| ISO 2848-1984 |
建筑结构.模数协调.原则和规定 |
(Building construction; Modular coordination; Principles and rules) |
| ISO 2850-1973 |
工业用硫酸钾.在105℃时质量损失的测定 |
(Potassium sulphate for industrial use; Determination of loss of mass at 105 degrees C) |
| ISO 2851-1993 |
食品工业用不锈钢弯头和三通 |
(Stainless steel bends and tees for the food industry) |
| ISO 2852-1993 |
食品工业用不锈钢卡接管接头 |
(Stainless steel clamp pipe couplings for the food industry) |
| ISO 2853-1993 |
食品工业用不锈钢螺纹旋入管套 |
(Stainless steel threaded couplings for the food industry) |
| ISO 2854-1976 |
数据的统计说明.有关平均数与方差数的估算与试验技术 |
(Statistical interpretation of data; Techniques of estimation and tests relating to means and variances) |
| ISO 2855-1976 |
放射性材料.包装.材料泄漏和辐射泄漏 |
(Radioactive materials; Packagings; Test for contents leakage and radiation leakage) |
| ISO 2857 AMD 1-1984 |
修改件1 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 1) |
| ISO 2857 AMD 2-1986 |
第2次修改 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 2) |
| ISO 2857 Technical Corrigendum 1-1990 |
ISO米制螺纹公差为4H至8H和4G至6G的粗牙与细牙的磨制丝锥.螺纹部分制造公差.技术勘误1 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; technical corrigendum 1) |
| ISO 2857-1973 |
ISO米制螺纹公差为4H至8H和4G至6G的粗牙与细牙的磨制丝锥.螺纹部分的制造公差 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; Manufacturing tolerances on the threaded portion) |
| ISO 2858-1975 |
离心式末端轴吸泵(额定压强 16巴).标记,标定工作点和尺寸 |
(End-suction centrifugal pumps (rating 16 bar); Designation, nominal duty point and dimensions) |
| ISO 2859-0-1995 |
属性检验的抽样程序.第0部分:ISO 2859属性抽样系统的介绍 |
(Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system) |
| ISO 2859-1 Technical Corrigendum 1-2001 |
计数抽样检验程序.第1部分:逐批检验时标明合格质量界限(AQL)的抽样计划.技术勘误1 |
(Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection; Technical Corrigendum 1) |
| ISO 2859-1-1999 |
计数抽样检验程序.第1部分:逐批检验时标明合格质量界限(AQL)的抽样计划 |
(Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection) |
| ISO 2859-2-1985 |
计数检查的抽样程序.第2部分:以批量单独检验的极限质量为指标的抽样方案 |
(Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection) |
| ISO 2859-3-1991 |
计数检查的取样规程.第3部分:箕斗式取样规程 |
(Sampling procedures for inspection by attributes; part 3: skip-lot sampling procedures) |
| ISO 2859-4-2002 |
计数抽样检验程序.第4部分:声明质量级的评定程序 |
(Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels) |
| ISO 286-1-1988 |
公差和配合的 ISO系统.第1部分:公差的基础,偏差和配合 |
(ISO system of limits and fits; part 1: bases of tolerances, deviations and fits) |
| ISO 286-2-1988 |
公差和配合的 ISO系统.第2部分:孔和轴的标准公差级和极限偏差表 |
(ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts) |
| ISO 2860-1992 |
土方机械.最小出入口尺寸 |
(Earth-moving machinery; minimum access dimensions) |
| ISO 2861-1-1974 |
真空技术.速离耦合器.尺寸.第1部分:夹钳型 |
(Vacuum technology; Quick-release couplings; Dimensions; Part I : Clamped type) |
| ISO 2861-2-1980 |
真空技术.速离耦合器.尺寸.第2部分:螺旋型 |
(Vacuum technology; Quick release couplings; Dimensions; Part 2 : Screwed type) |
| ISO 2863-1973 |
电影技术.8mmS-11 型电影摄影机胶片盒.胶片的运行长度.尺寸和规范 |
(Cinematography; Motion-picture camera cartridge, 8 mm Type S Model II; Run length of film; Dimensions and specifications) |
| ISO 2865 Technical Corrigendum 1-1991 |
金属铝生产用氧化铝.硼含量测定.姜黄素分光光度法.技术勘误1 |
(Aluminium oxide primarily used for the production of aluminium; determination of boron content; curcumin spectrophotometric method; technical corrigendum 1) |
| ISO 2865-1973 |
金属铝生产用氧化铝.硼含量的测定.姜黄素分光光度法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method) |
| ISO 2866-1974 |
工业用硫磺.碳总含量的测定.滴定法 |
(Sulphur for industrial use; Determination of total carbon content; Titrimetric method) |
| ISO 2867-1994 |
土方机械.出入口装置 |
(Earth-moving machinery - Access systems) |
| ISO 2868-1973 |
表面活性剂.洗涤剂.对酸水解稳定的阴离子活性物质.微量的测定 |
(Surface active agents; Detergents; Anionic-active matter stable to acid hydrolysis; Determination of trace amounts) |
| ISO 2869-1973 |
表面活性剂.洗涤剂.在碱性条件下可水解的阴离子活性物质.可水解和不可水解的阴离子活性物质的测定 |
(Surface active agents; Detergents; Anionic-active matter hydrolyzable under alkaline conditions; Determination of hydrolyzable and non-hydrolyzable anionic-active matter) |
| ISO 287-1985 |
纸和纸板.水份含量的测定.烘干法 |
(Paper and board; Determination of moisture content; Oven-drying method) |
| ISO 2870-1986 |
表面活性剂.洗涤剂.酸性条件下可水解的和不可水解的阴离子活性物质的测定 |
(Surface active agents; Detergents; Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions) |
| ISO 2871-1-1988 |
表面活性剂.洗涤剂-阳离子活性物质含量的测定.第1部分:高分子量阳极活性物质 |
(Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter) |
| ISO 2871-2-1990 |
表面活性剂.洗涤剂,阳离子活性物含量测定.第2部分:低分子团(200-500)的阳离子活性物质 |
(Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)) |
| ISO 2873-2000 |
包装.完整满装运输包装件和成组装运.低压试验 |
(Packaging - Complete, filled transport packages and unit loads - Low pressure test) |
| ISO 2875-2000 |
包装.完整满装运输包装件和成组装运.喷水试验 |
(Packaging - Complete, filled transport packages and unit loads - Water-spray test) |
| ISO 2876-1985 |
包装.满装的运输包装.滚动试验 |
(Packaging; Complete, filled transport packages; Rolling test) |
| ISO 2877 AMD 1-1976 |
第1次修改 |
(Sulphuric acid for industrial use; determination of chlorides content; potentiometric method; amendment 1) |
| ISO 2877-1974 |
工业用硫酸.氯化物含量的测定.电位滴定法 |
(Sulphuric acid for industrial use; Determination of chlorides content; Potentiometric method) |
| ISO 2878-1987 |
硫化橡胶.抗静电和导电的制品.电阻的测定 |
(Rubber, vulcanized; Antistatic and conductive products; Determination of electrical resistance) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com