标准号 |
中文名称 |
英文名称 |
ISO 12678-2-1996 |
耐火制品.耐火砖的尺寸测量与外部缺陷.第2部分:转角和边缘存在的缺陷及其它表面不完备性 |
(Refractory products - Measurement of dimensions and external defects of refractory bricks - Part 2: Corner and edge defects and other surface imperfections) |
ISO 1268-1-2001 |
纤维增强塑料.试验板的制备方法.第1部分:通用条件 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions) |
ISO 1268-1974 |
塑料.试验用强化的树脂粘合和低压层压的板材或板条的玻璃纤维制备 |
(Plastics; Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes) |
ISO 1268-2-2001 |
纤维增强塑料.试验用板材的生产方法.第2部分:接触模压法和喷射成形法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding) |
ISO 1268-3-2000 |
纤维增强塑料.试验板的生产方法.第3部分:湿压缩模塑法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding) |
ISO 1268-5-2001 |
纤维增强塑料.试验用板材的生产方法.第5部分:长纤维卷绕法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding) |
ISO 1268-6-2002 |
纤维增强塑料.试验用板材的生产方法.第6部分:Pultrusion 铸造品 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding) |
ISO 1268-7-2001 |
纤维增强塑料.试验用板材的生产方法.第7部分:树脂压铸法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding) |
ISO 1268-8-2004 |
纤维增强塑料.试验板的制备方法.第8部分:SMC和BMC的压缩模制 |
|
ISO 1268-9-2003 |
纤维增强塑料.试验板的制备方法.第9部分:GMT/STC模制 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC) |
ISO 1268-9-2003 |
纤维增强塑料.试验板的制备方法.第9部分:GMT/STC模制 |
|
ISO 12683-2004 |
机械镀锌涂层.规范和试验方法 |
|
ISO 12686-1999 |
金属和其他无机覆层.镍、自催化镍或铬镀敷或精整加工前用金属物质的自动控制喷丸处理 |
(Metallic and other inorganic coatings - Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish) |
ISO 12687-1996 |
金属覆层.孔隙率试验.湿硫(硫华)试验 |
(Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test) |
ISO 127-1995 |
橡胶,天然胶乳浓缩物.氢氧化钾值的测定 |
(Rubber, natural latex concentrate - Determination of KOH number) |
ISO 12706-2000 |
无损检验.术语.用于渗透试验的术语 |
(Non destructive testing - Terminology - Terms used in penetrant testing) |
ISO 1271-1983 |
香精油.羰基值的测定 |
(Essential oils; Determination of carbonyl value; Free hydroxylamine method) |
ISO 12710-2002 |
无损检验.超声检测.评估超声试验仪器的电子特性 |
(Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments) |
ISO 12713-1998 |
无损检验.声音传播检查.传感器的第一次校正 |
(Non-destructive testing - Acoustic emission inspection - Primary calibration of transducers) |
ISO 12714-1999 |
非损试验.声音发散的检验.声音发散敏感器的二级校正 |
(Non-destructive testing - Acoustic emission inspection - Secondary calibration of acoustic emission sensors) |
ISO 12715-1999 |
超声非损试验.接触搜索超声束截面特性的试验过程和参考信息组 |
(Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles) |
ISO 12716-2001 |
无损检验.声音发散检验.词汇 |
(Non-destructive testing - Acoustics emission inspection - Vocabulary) |
ISO 1272-2000 |
香精油.酚类含量的测定 |
(Essential oils - Determination of content of phenols) |
ISO 12721-2000 |
无损试验.热中子放射性试验.射线束L/D比率的测定 |
(Non-destructive testing - Thermal neutron radiographic testing - Determination of beam L/D ratio) |
ISO 12725-1997 |
镍和镍合金铸件 |
(Nickel and nickel alloy castings) |
ISO 12737-1996 |
金属材料.平面变形断裂韧性的测定 |
(Metallic materials - Determination of the plane-strain fracture toughness) |
ISO 12739-1997 |
硫化锌浓度.锌含量的测定.离子交换/EDTA滴定法 |
(Zinc sulfide concentrates - Determination of zinc content - Ion-exchange/EDTA titrimetric method) |
ISO 12740-1998 |
硫化铅浓缩物.银和金含量的测定.使用铅析法和灰皿试金法的火焰试金和火焰原子吸收分光光度法 |
(Lead sulfide concentrates - Determination of silver and gold contents - Fire assay and flame atomic absorption spectrometric method using scorification or cupellation) |
ISO 12742-2000 |
铜、铅和锌硫化物浓缩物.可传送的湿度范围的测定.流度台法 |
(Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow table method) |
ISO 12743-1998 |
铜,铅和锌硫化浓缩物.金属和湿度含量测定的抽样程序 |
(Copper, lead and zinc sulfide concentrates - Sampling procedures for determination of metal and moisture content) |
ISO 12744-1997 |
铜,铅和锌硫化浓缩物.取样精确性检验用实验性方法 |
(Copper, lead and zinc sulfide concentrates - Experimental methods for checking the precision of sampling) |
ISO 12745-1996 |
铜、铅和锌矿石及浓缩物.质量测量技术的精度和偏差 |
(Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques) |
ISO 1275-1995 |
传动和输送机用双节距的精密辊链和链轮 |
(Double-pitch precision roller chains and sprockets for transmission and conveyors) |
ISO 12753-1-1999 |
绘图圆规.第1部分:命名、图例和等效术语 |
(Compasses - Part 1: Nomenclature, illustrations and equivalent terms) |
ISO 12753-2-1999 |
绘图圆规.第2部分:要求、名称与符号和作标记 |
(Compasses - Part 2: Requirements, designation and marking) |
ISO 12756-1998 |
绘图与书写仪器.圆珠笔和签字笔.词汇 |
(Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary) |
ISO 12757-1-1998 |
园珠笔及其笔芯.第1部分:一般应用 |
(Ball point pens and refills - Part 1: General use) |
ISO 12757-2-1998 |
圆珠笔和笔芯.第2部分:文件用途 |
(Ball point pens and refills - Part 2: Documentary use (DOC)) |
ISO 12771-1997 |
塑料实验室器皿.可处置血清移液管 |
(Plastics laboratory ware - Disposable serological pipettes) |
ISO 12772-1997 |
实验室玻璃器皿.可处置微血球容量计毛细管 |
(Laboratory glassware - Disposable microhaematocrit capillary tubes) |
ISO 12775-1997 |
额定散装玻璃产品的复合材料及其试验方法导则 |
(Guidelines on types of glass of normal bulk-production composition and their test methods) |
ISO 12777-1-1994 |
托盘连接件的检验方法.第1部分:托盘用钉子,其它榫钉型紧固件和U形钉的抗弯曲的测定 |
(Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples) |
ISO 12777-2-2000 |
托盘连接件的试验方法.第2部分:托盘用钉子和U形钉的抗拉力的测定 |
(Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples) |
ISO 12777-3-2002 |
托盘连接件的检验方法.第3部分:托盘连接件的强度测定 |
(Methods of test for pallet joints - Part 3: Determination of strength of pallet joints) |
ISO 12789-2000 |
标准中子射线.模拟工作地点中子场产生的特性和方法 |
(Reference neutron radiations - Characteristics and methods of production of simulated workplace neutron fields) |
ISO 1279-1996 |
香精油.利用氯化羟铵电势法对羰基值的测定 |
(Essential oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride) |
ISO 12790-1-2001 |
辐射防护.放射生物测定的性能标准.第1部分:一般原则 |
(Radiation protection - Performance criteria for radiobioassay - Part 1: General principles) |
ISO 12794-2000 |
核能.辐射防护.四肢和眼用单独热致发光剂量计 |
(Nuclear energy - Radiation protection - Individual thermoluminescence dosemeters for extremities and eyes) |
ISO 12795-2004 |
核燃料技术.二氧化铀粉末和小球.带杂质修正的重量分析法测定铀和氧/铀比率 |
|
ISO 128-1-2003 |
技术图纸.图形表示的一般原则.第1部分:前言和索引 |
(Technical drawings - General principles of presentation - Part 1: Introduction and index) |
ISO 128-1-2003 |
技术图纸.图形表示的一般原则.第1部分:前言和索引 |
|
ISO 128-20-1996 |
技术制图.画法的一般原则.第20部分:图线的基本规定 |
(Technical drawings - General principles of presentation - Part 20: Basic conventions for lines) |
ISO 128-21-1997 |
技术制图.画法的一般原则.第21部分:计算机辅助设计(CAD)系统用图线的表示 |
(Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems) |
ISO 128-22-1999 |
技术制图.展示的一般规则.第22部分:标题线和参考线的惯例和应用 |
(Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines) |
ISO 128-23-1999 |
技术制图.绘制的一般原理.第23部分:结构绘图线 |
(Technical drawings - General principles of presentation - Part 23: Lines on construction drawings) |
ISO 128-24-1999 |
技术制图.展示的一般规则.第24部分:机械工程制图线 |
(Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings) |
ISO 128-25-1999 |
技术制图.表示的一般原则.第25部分:造船绘图线 |
(Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings) |
ISO 128-30-2001 |
技术制图.画法的一般原则.第30部分:视图的基本惯例 |
(Technical drawings - General principles of presentation - Part 30: Basic conventions for views) |
ISO 128-34-2001 |
技术制图.画法的一般原则.第34部分:机械工程图的视图 |
(Technical drawings - General principles of presentation - Part 34: Views on mechanical engineering drawings) |
ISO 128-40-2001 |
技术制图.画法的一般原则.第40部分:切面和截面的一般换算 |
(Technical drawings - General principles of presentation - Part 40: Basic conventions for cuts and sections) |
ISO 128-44-2001 |
技术制图.画法的一般原则.第44部分:机械工程绘图部分 |
(Technical drawings - General principles of presentation - Part 44: Sections on mechanical engineering drawings) |
ISO 128-50-2001 |
技术制图.画法的一般原则.第50部分:切图和分图的表示区域的基本惯例 |
Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections |
ISO 12800-2003 |
核燃料技术.氧化铀粉末比表面积的BET测量方法指南 |
(Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method) |
ISO 12800-2003 |
核燃料技术.氧化铀粉末比表面积的BET测量方法指南 |
|
ISO 12803-1997 |
测定钚浓缩物用硝酸钚溶液样品表示方法 |
(Representative sampling of plutonium nitrate solutions for determination of plutonium concentration) |
ISO 12807-1996 |
放射性材料的安全运输.包装件的泄漏试验 |
(Safe transport of radioactive materials - Leakage testing on packages) |
ISO 12819 Technical Corrigendum 1-1999 |
电池动力表电池寿命的评估方法.技术勘误1 |
(Method of evaluation of the battery life of a battery-powered watch; Technical Corrigendum 1) |
ISO 12819-1999 |
电池动力表电池寿命的评估方法 |
(Method of evaluation of the battery life of a battery-powered watch) |
ISO 12844-1999 |
未加工的光学玻璃.金刚石薄片的可磨性.试验方法和分类 |
Raw optical glass - Grindability with diamond pellets - Test method and classification |
ISO 12853-1997 |
光学和光学仪器.显微镜.用户信息提供 |
Optics and optical instruments - Microscopes - Information provided to the user |
ISO 12858-1-1999 |
光学和光学设备.大地测量设备的辅助装置.第1部分:不便钢水平支柱 |
Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1: Invar levelling staffs |
ISO 12858-2-1999 |
光学和光学设备.大地测量设备的辅助装置.第2部分:三角架 |
Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2: Tripods |
ISO 12864-1997 |
眼科光学.接触透镜.散光的测定 |
Ophthalmic optics - Contact lenses - Determination of scattered light |
ISO 12865-1998 |
眼科仪器.检眼镜 |
Ophthalmic instruments - Retinoscopes |
ISO 12866-1999 |
眼科设备.视野镜 |
Ophthalmic instruments - Perimeters |
ISO 12867-1998 |
眼科仪器.试验框架 |
Ophthalmic instruments - Trial frames |
ISO 12870-1997 |
眼镜科学.眼镜镜.一般要求和试验方法 |
Ophthalmic optics - Spectacle frames - General requirements and test methods |
ISO 12870-2004 |
眼科光学.眼镜镜架.要求和试验方法 |
|
ISO 12870-2004 |
眼科光学.眼镜镜架.要求和试验方法 |
|
ISO 12884-2000 |
环境空气.总(气相和粒子相)多环芳香烃的测定.用气相色谱法或质谱分析法收集过滤器背上的吸附剂 |
Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses |
ISO 12890-1999 |
水质.对淡水鱼的胚胎和幼体毒性的测定 |
Water quality - Determination of toxicity to embryos and larvae of freshwater fish - Semi-static method |
ISO 12891-1-1998 |
外科植入物的分析和修补.第1部分:修补和处理 |
Retrieval and analysis of surgical implants - Part 1: Retrieval and handling |
ISO 12891-2-2000 |
外科植入物的分析和收回.第2部分:收回的金属外科植入物的分析 |
Retrieval and analysis of surgical implants - Part 2: Analysis of retrieved metallic surgical implants |
ISO 12891-3-2000 |
外科植入物的分析和收回.第3部分:收回的聚合的外科植入物的分析 |
Retrieval and analysis of surgical implants - Part 3: Analysis of retrieved polymeric surgical implants |
ISO 12891-4-2000 |
外科植入物的分析和收回.第3部分:收回的陶瓷的外科植入物的分析 |
Retrieval and analysis of surgical implants - Part 4: Analysis of retrieved ceramic surgical implants |
ISO 12894-2001 |
热环境人类工效学.暴露于极热和冷环境中的人的医学检验 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments |
ISO 129-1-2004 |
技术绘图.尺寸和公差的表示.第1部分:一般准则 |
|
ISO 129-1985 |
技术制图.尺寸.一般原则、定义、标注方法和特殊画法 |
Technical drawings; Dimensioning; General principles, definitions, methods of execution and special indications |
ISO 12900-1997 |
硬度煤.磨损性的测定 |
Hard coal - Determination of abrasiveness |
ISO 12917-1-2002 |
石油和液化石油产品.卧式圆形油罐的校正.第1部分:手工法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manuel methods |
ISO 12917-2-2002 |
石油和液态石油产品.卧式圆筒状油罐的标定.第2部分:光电内测距法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method |
ISO 12922 Technical Corrigendum 1-2001 |
润滑剂、工业用油和有关产品(L级).H系列(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类规范.技术勘误1 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1 |
ISO 12922-1999 |
润滑油、工业油及有关产品(L级).H系列(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
ISO 12925-1 Technical Corrigendum 1-2002 |
润滑剂、工业用油和相关产品(L类).(齿轮)C种.第1部分:密封齿轮系统用润滑剂.技术勘误1 |
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1 |
ISO 12925-1-1996 |
润滑剂、工业用油及有关(L类)产品.(齿轮)C种.第1部分:密封齿轮系统用润滑剂规范 |
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems |
ISO 12937-2000 |
石油产品.水含量测定.库仑卡耳.费歇尔滴定法 |
Petroleum products - Determination of water - Coulometric Karl Fischer titration method |
ISO 12944-1-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第1部分:一般性介绍 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction |
ISO 12944-2-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第2部分:环境分类 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments |
ISO 12944-3-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第3部分:设计上的考虑 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations |
ISO 12944-4-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第4部分:表面类型和表面处理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation |
ISO 12944-5-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第5部分:防护漆系统 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems |
ISO 12944-6-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第6部分:实验室性能试验方法 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods |
ISO 12944-7-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第7部分:涂漆工艺的实施和管理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work |
ISO 12944-8-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第8部分:新工艺和维修规范的开发 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance |
ISO 12945-1-2000 |
纺织品.测定织物表面起毛和起球的倾向.第1部分:起球箱法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method |
ISO 12945-2-2000 |
纺织材料.测定织物表面起毛和起球的特性.第2部分:改良的起毛起球试验法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method |
ISO 12947-1 Technical Corrigendum 1-2002 |
纺织品.用马丁代尔(Martinadale)法对织物抗磨损性的测定.第1部分:马丁代尔耐磨试验仪.技术勘误1 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus; Technical Corrigendum 1 |
ISO 12947-1-1998 |
织物.Martinadale法对纤维磨损抗性的测定.第1部分:磨损试验装置 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus |
ISO 12947-2 Technical Corrigendum 1-2002 |
纺织品.用马丁代尔(Martinadale)法对织物抗磨损性的测定.第2部分:试样破损的测定.技术勘误1 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown; Technical Corrigendum 1) |
ISO 12947-2-1998 |
纺织品.马丁代尔法测定织物耐磨性.第2部分:样品破损的测定 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown) |
ISO 12947-3 Technical Corrigendum 1-2002 |
纺织品.用马丁代尔(Martinadale)法对织物抗磨损性的测定.第3部分:质量损失的测定.技术勘误1 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss; Technical Corrigendum 1) |
ISO 12947-3-1998 |
织物.Martinadale法对纤维磨损抗性的测定.第3部分:重量损失的测定 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss) |
ISO 12947-4 Technical Corrigendum 1-2002 |
纺织品.用马丁代尔(Martinadale)法对织物抗磨损性的测定.第4部分:外观变化的评定.技术勘误1 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change; Technical Corrigendum 1 |
ISO 12947-4-1998 |
织物.Martinadale法对纤维磨损抗性的测定.第4部分:表面变化的评估 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change |
ISO 12951-1999 |
铺地织物.用Lisson试验对质量损失的测定 |
Textile floor coverings - Determination of mass loss using the Lisson test |
ISO 12952-1-1998 |
纺织品.床上用品的燃烧性能.第1部分:由隐燃香烟引起的可燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette |
ISO 12952-2-1998 |
织物.床上用品的燃烧性能.第2部分:由隐燃香烟引起的可燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette |
ISO 12952-3-1998 |
织物.床上用品的燃烧性能.第3部分:由一小团明火引起的可燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame |
ISO 12952-4-1998 |
织物.床上用品的燃烧性能.第4部分:由一小团明火引起的可燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame |
ISO 12956-1999 |
土工和土工相关产品.特性化开口尺寸的测定 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size |