标准号 |
中文名称 |
英文名称 |
DIN EN ISO 7231-1998 |
泡沫柔性聚合材料.恒定压降下的气流值估计法 |
Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop (ISO 7231:1984); German version EN ISO 7231:1997 |
DIN EN ISO 7233-1995 |
橡胶和塑料软管及软管组件.吸引阻力测定 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 |
DIN EN ISO 7235-1995 |
声学.消音输送道测量步骤.插入损耗、流动噪声和压力损失 |
Acoutics - Measurement procedures for ducted silencers - Insertion loss, flow noise and total pressure loss (ISO 7235:1991); German version EN ISO 7235:1995 |
DIN EN ISO 7235-2004 |
声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003) |
DIN EN ISO 7235-2004 |
声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 |
|
DIN EN ISO 7250-1997 |
工艺设计相关的基本人体测量 |
Basic human body measurements for technological design (ISO 7250:1996); German version EN ISO 7250:1997 |
DIN EN ISO 7253-2002 |
涂料和清漆.耐中性盐雾的测定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) (ISO 7253:1996); German version EN ISO 7253:2001 |
DIN EN ISO 7263-1995 |
瓦楞纸.试验起瓦楞后平面耐压的测定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994); German version EN ISO 7263:1995 |
DIN EN ISO 7278-1-1996 |
液态烃.动态测量.容积式流量计试验系统.第1部分:一般原理 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995 |
DIN EN ISO 7278-2-1997 |
液态烃.动态测量.容量计用验证系统.第2部分:管式校准仪 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988); German version EN ISO 7278-2:1995 |
DIN EN ISO 7284-1996 |
电阻焊设备.汽车工业用多点点焊的两个单独副线圈的变压器详细规范 |
Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993); German version EN ISO 7284:1996 |
DIN EN ISO 7287-2003 |
热切割设备用图形符号 |
Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002 |
DIN EN ISO 7291-2001 |
气体焊接设备.焊接,切割和同类过程中多方面系统的压力调节 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999); German version EN ISO 7291:2001 |
DIN EN ISO 7327-1997 |
塑料.环氧树脂用固化剂和催化剂.酸酐中游离酸测定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997 |
DIN EN ISO 7328-2000 |
奶制食用冰和冰混合物配料.脂肪含量的测定.重量分析法 |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) (ISO 7328:1999); German version EN ISO 7328:1999 |
DIN EN ISO 734-1-2001 |
油料种子残留物.油含量的测定.第1部分:已烷(或轻油)萃取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:1998); German version EN ISO 734-1:2000 |
DIN EN ISO 734-2-2001 |
油料种子残留物.油含量的测定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998); German version EN ISO 734-2:2000 |
DIN EN ISO 7345-1996 |
热绝缘.物理量与定义 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987); German version EN ISO 7345:1995 |
DIN EN ISO 7346-1-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))第1部分:静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 1: Static method (ISO 7346-1:1996); German version EN ISO 7346-1:1997 |
DIN EN ISO 7346-2-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.第2部分:半静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method (ISO 7346-2:1996); German version EN ISO 7346-2:1997 |
DIN EN ISO 7346-3-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科)急性致死物质毒性的测定.第3部分:径流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method (ISO 7346-3:1996); German version EN ISO 7346-3:1997 |
DIN EN ISO 7371-1996 |
家用冷冻设备.有低温隔层和无低温隔层的冰箱.特性和试验方法 |
Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods (ISO 7371:1995); German version EN ISO 7371:1995 |
DIN EN ISO 7376-2004 |
麻醉和呼吸设备.气管插管用喉镜 |
|
DIN EN ISO 7380-1998 |
内六角平头螺钉 |
Heaxagon socket button head screws (ISO 7380:1997); German version EN ISO 7380:1997 |
DIN EN ISO 7380-2004 |
内六角平圆头螺钉 |
|
DIN EN ISO 7384-1995 |
人造大气环境的腐蚀试验.一般要求 |
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986); German version EN ISO 7384:1995 |
DIN EN ISO 7389-2004 |
房屋建筑.连接件.密封件的回弹性测定 |
|
DIN EN ISO 7390-2004 |
房屋建筑.连接件.密封件的耐流动性测定 |
|
DIN EN ISO 7391-1-1999 |
塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体系和基础规范 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:1996); German version EN ISO 7391-1:1999 |
DIN EN ISO 7391-2-1999 |
塑料.聚碳酸酯模塑和挤塑材料.第2部分:试样制备和特性测定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999 |
DIN EN ISO 7393-1-2000 |
水质.游离氯和氯的总含量测定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985); German version EN ISO 7393-1:2000 |
DIN EN ISO 7393-2-2000 |
水质.游离氯和氯的总含量测定.第2部分:为常规控制目的使用N,N-二乙基-1,4-苯二胺的比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:1985); German version EN ISO 7393-2:2000 |
DIN EN ISO 7393-3-2000 |
水质.游离氯和氯的总含量测定.第3部分:测定氯总含量的碘量滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990); German version EN ISO 7393-3:2000 |
DIN EN ISO 7405-1998 |
牙科学.牙科医疗设备生物分解性的疾病前评定.牙科材料的试验方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997 |
DIN EN ISO 7438-2000 |
金属材料.弯曲试验 |
Metallic materials - Bend test (ISO 7438:1985); German version EN ISO 7438:2000 |
DIN EN ISO 7438-2005 |
金属材料.弯曲试验 |
|
DIN EN ISO 7439-2002 |
含铜的宫内节育避孕器具.要求、试验 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002); German version EN ISO 7439:2002 |
DIN EN ISO 7441-1995 |
金属和合金的腐蚀.双金属在露天暴露腐蚀试验中腐蚀的测定 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984); German version EN ISO 7441:1995 |
DIN EN ISO 7458-2004 |
玻璃容器.耐内部压力性.试验方法 |
|
DIN EN ISO 7459-2004 |
玻璃容器.耐热冲击性和热冲击耐久性.试验方法 |
|
DIN EN ISO 748-2000 |
明渠液流的测量.速度-面积方法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997); German version EN ISO 748:2000 |
DIN EN ISO 7488-1995 |
牙科用混汞器 |
Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995 |
DIN EN ISO 7490-2001 |
牙科用石膏粘接铸造熔模 |
Dental gypsum-bonded casting investments (ISO 7490:2000); German version EN ISO 7490:2000 |
DIN EN ISO 7491-2001 |
牙科材料.彩色稳定性的测定 |
Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000 |
DIN EN ISO 7492-1998 |
牙科用探针 |
Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998 |
DIN EN ISO 7493-2000 |
牙科医生凳 |
Dental operator`s stool (ISO 7493:1997 + Technical Corrigendum 1:1999); German version EN ISO 7493:2000 |
DIN EN ISO 7494-1-2005 |
牙科学.牙科装置.第1部分:一般要求和试验方法 |
|
DIN EN ISO 7494-1997 |
牙科综合治疗设备 |
Dental units (ISO 7494:1996); German version EN ISO 7494:1997 |
DIN EN ISO 75-1-1996 |
塑料.测定耐热成型温度.第1部分:一般测试方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993); German version EN ISO 75-1:1996 |
DIN EN ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.第1部分:一般试验方法 |
|
DIN EN ISO 75-2-1996 |
塑料.测定耐热成型温度.第2部分:塑料和硬橡胶 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993); German version EN ISO 75-2:1996 |
DIN EN ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶 |
|
DIN EN ISO 75-3-1996 |
塑料.测定耐热成型温度.第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993); German version EN ISO 75-3:1996 |
DIN EN ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
|
DIN EN ISO 7500-1 Bb.1-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.拉伸、压缩及弯曲试验机的要求、验证和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio |
DIN EN ISO 7500-1 Bb.2-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.弹簧试验机的要求、验证和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach |
DIN EN ISO 7500-1 Bb.3-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.疲劳试验机的要求、验收和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac |
DIN EN ISO 7500-1-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO 7500-1:1999); German version EN ISO 7500-1:1999 |
DIN EN ISO 7500-1-2004 |
金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 |
|
DIN EN ISO 7500-2-1999 |
金属材料.静态单轴应力试验机的校验.第2部分:拉伸应力的蠕变试验机.试验力的校验 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines; verification of the applied load (ISO 7500-2:1996); German version EN ISO 7500-2:1999 |
DIN EN ISO 7536-1996 |
石油产品.汽油耐氧化性测定.诱导期方法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994); German version EN ISO 7536:1996 |
DIN EN ISO 7539-1-1995 |
金属和合金的腐蚀.腐蚀应力试验.第1部分:试验程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987); German version EN ISO 7539-1:1995 |
DIN EN ISO 7539-2-1995 |
金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989); German version EN ISO 7539-2:1995 |
DIN EN ISO 7539-3-1995 |
金属和合金的耐腐蚀性.应力腐蚀试验.第3部分:U型弯曲试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989); German version EN ISO 7539-3:1995) |
DIN EN ISO 7539-4-1995 |
金属和合金的腐蚀.应力腐蚀试验.第4部分:单向载荷拉伸试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989); German version EN ISO 7539-4:1995) |
DIN EN ISO 7539-5-1995 |
金属和合金的腐蚀.应力腐蚀试验.第5部分:C-环形试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989); German version EN ISO 7539-5:1995) |
DIN EN ISO 7539-6-2003 |
金属和合金的腐蚀.应力腐蚀试验.第6部分:预断裂试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens (ISO 7539-6:2003); German version EN ISO 7539-6:2003) |
DIN EN ISO 7539-7-1995 |
金属和合金的腐蚀.应力腐蚀试验.第7部分:慢速应变率试验 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989); German version EN ISO 7539-7:1995) |
DIN EN ISO 7539-7-2005 |
金属与合金的腐蚀.应力腐蚀试验.第7部分:慢速率应力试验方法 |
|
DIN EN ISO 7551-1998 |
牙科吸收点 |
(Dental absorbent points (ISO 7551:1996); German version EN ISO 7551:1998) |
DIN EN ISO 7579-1996 |
染料.有机溶剂溶解度的测定.重量法电影摄影.在打过8mmS型影像区域.位置和尺寸 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method (ISO 7579:1990); German version EN ISO 7579:1996 |
DIN EN ISO 7590-2001 |
钢丝输送带.总厚度和覆层厚度的测量方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001); German version EN ISO 7590:2001 |
DIN EN ISO 7622-1-1995 |
钢丝芯线输送机皮带.纵向牵引试验.第1部分:伸长的测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984); German version EN ISO 7622-1:1995 |
DIN EN ISO 7622-2-1995 |
钢丝芯线输送机皮带.纵向牵引试验.第2部分:抗拉强度的测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984); German version EN ISO 7622-2:1995 |
DIN EN ISO 7623-1997 |
钢丝绳输送机皮带.钢丝绳和芯层间粘合.交货状态检验和热处理后的检验 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996); German version EN ISO 7623:1997 |
DIN EN ISO 7662-1996 |
橡胶和塑料软管.内衬磨损的测定 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 |
DIN EN ISO 7686-2005 |
塑料管和配件.不透明度的测定 |
|
DIN EN ISO 7711-1-1998 |
牙科用旋转器械.金刚钻器具.第1部分:尺寸,要求,标识和包装 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998 |
DIN EN ISO 7711-2-1995 |
牙科用旋转器械.金刚钻器具.第2部分:圆盘刀 |
Dental rotary instrument - Diamond instruments - Part 2: Discs (ISO 7711-2:1992); German version EN ISO 7711-2:1995 |
DIN EN ISO 7711-3-1995 |
牙科用旋转器械.金刚钻器具.第3部分:磨粒尺寸、名称与符号和彩色编码 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992); German version EN ISO 7711-3:1995 |
DIN EN ISO 7711-3-2005 |
牙医学.金刚钻旋转器械.第3部分:磨粒尺寸、名称与符号和色码 |
|
DIN EN ISO 7719-1998 |
1型通用扭矩六角螺母(全金属螺母). 强度等级5,8和10 |
Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997 |
DIN EN ISO 772-2000 |
液体比重计测定.词汇和符号 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996); German version EN ISO 772:2000 |
DIN EN ISO 772/A1-2004 |
水文测定.词汇和符号 |
(Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 1:2002); German version EN ISO 772:2000/A1:2003) |
DIN EN ISO 772/A1-2004 |
水文测定.词汇和符号 |
|
DIN EN ISO 7721-2-1994 |
沉头螺钉.第2部分:十字槽 |
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994 |
DIN EN ISO 7726-2002 |
热环境的人类工效学.物理量测量仪器 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001 |
DIN EN ISO 7730-1995 |
中等热环境.对热舒适度预测平均通过(PMV)和预测不满意百分率(PPD)的测定及条件规范 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994); German version EN ISO 7730:1995 |
DIN EN ISO 7731-2005 |
人类功效学.公共和工作场所险情信号.险情听觉信号(ISO 7731-2003);德文版本 EN ISO 7731-2005 |
|
DIN EN ISO 7751-1997 |
橡胶和塑料软管及软管管道.试验压力和爆破压力与设计工作压力的比值 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
DIN EN ISO 7765-1-2004 |
塑料薄膜和薄板.自由落体法测定抗冲击性.第1部分:梯级法 |
|
DIN EN ISO 7779-2002 |
声学.信息技术设备和电信设备排放的空气噪声的测量 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:1999); German version EN ISO 7779:2001 |
DIN EN ISO 7783-1-1999 |
涂层材料.水蒸气渗透率的测定.第1部分:游离膜用皮层法 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998); German version EN ISO 7782-1:1999 |
DIN EN ISO 7783-2-1999 |
涂料和清漆.外部砖石工程和混凝土用涂覆材料和涂覆系统.第2部分:水蒸气渗透率的测定和分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999); German version EN ISO 7783-2:1999 |
DIN EN ISO 7785-1-1999 |
手持式牙科器械.第1部分:高速空气涡轮手持器械 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
DIN EN ISO 7785-2-1998 |
手持式牙科器械.第2部分:平角和啮合角手持式器械 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995); German version EN ISO 7785-2:1997 |
DIN EN ISO 7786-2001 |
牙科用旋转器械.实验室研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001); German version EN ISO 7786:2001 |
DIN EN ISO 7787-2-2001 |
牙科用旋转器械.切割刀具.第2部分:实验室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000); German version EN ISO 7787-2:2000 |
DIN EN ISO 7787-4-2002 |
牙科用旋转器械.切割刀具.第4部分:技工室用小型硬质合金刀具 |
Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002 |
DIN EN ISO 7792-1-2004 |
塑料.热塑性聚酯模塑和挤压材料.第1部分:名称与符号系统和基本规范 |
|
DIN EN ISO 7792-2-2004 |
塑料.热塑性聚酯模塑和挤压材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 7799-2000 |
金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000 |
DIN EN ISO 780-1999 |
包装.货物搬运用图形标志 |
Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999 |
DIN EN ISO 7808-1998 |
塑料.热固性模塑材料.输送流的测定 |
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998 |
DIN EN ISO 7822-2000 |
玻璃纤维增强塑料.空隙量测定.灼烧损失、机械粉碎和静态计数法 |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 |
DIN EN ISO 7823-1-2000 |
塑料.聚甲基丙烯酸甲酯板.型号、尺寸和特性.第1部分:铸板 |
Plastic - Poly(methyl methacrylate) sheet; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1998); German version EN ISO 7823-1:2000 |
DIN EN ISO 7823-2-1997 |
塑料.甲基丙烯酸甲酯板.型号,尺寸和特性.第2部分:熔化压延的积压板 |
Plastics - Poly(methyl methacrylate) sheets; types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996); German version EN ISO 7823-2:1996 |
DIN EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯薄板.类型、尺寸和特性.第3部分:连续浇铸板 |
|
DIN EN ISO 7827-1996 |
水质.含水介质中有机物的充分需氧生物降解性测定.分析溶解的有机矿物质的方法 |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:1994); German version EN ISO 7827:1995 |
DIN EN ISO 7837-2000 |
肥料.细粒肥料容积密度的测定 |
Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000 |
DIN EN ISO 7840 Berichtigung 1-2001 |
DIN EN ISO 7840-1995的勘误 |
Corrigendum to DIN EN ISO 7840:1995 (German version EN ISO 7840:1995/A1:2000) |
DIN EN ISO 7840-1995 |
小艇.抗燃烧燃料软管 |
Small craft - Fire-resistant fuel hoses (ISO 7840:1994); German version EN ISO 7840:1995 |
DIN EN ISO 7840-2004 |
小艇.耐火燃油软管 |
|
DIN EN ISO 7854-1997 |
橡胶或塑料涂层织物.抗折曲损坏性的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997 |
DIN EN ISO 7864-1996 |
一次性使用无菌皮下注射针头 |
Sterile hypodermic needles for single use (ISO 7864:1993); German version EN ISO 7864:1995 |
DIN EN ISO 787-13-2002 |
颜料和体质染料的通用试验方法.第13部分:水溶性硫酸盐、氯化物和硝酸盐的测定 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002); German version EN ISO 787-13:2002 |
DIN EN ISO 787-14-2002 |
颜料和体质染料的通用试验方法.第14部分:水萃取物电阻率的测定 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002); German version EN ISO 787-14:2002 |
DIN EN ISO 787-19-1995 |
颜料和填料的一般试验方法.第19部分:水溶性硝酸盐的测定(水杨酸法) |
General methods of test for pigments and extenders - Part 19: Determination of water-soluble nitrates (salicylic acid method) (ISO 787-19:1974); German version EN ISO 787-19:1995 |
DIN EN ISO 787-2-1995 |
颜料和填充剂的一般试验方法.第2部分:在105 ℃挥发物的测定 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 C (ISO 787-2:1981); German version EN ISO 787-2:1995 |
DIN EN ISO 787-3-2001 |
颜料和填充剂的一般试验方法.第3部分:水溶物的测定.热萃取法 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000); German version EN ISO 787-3:2000 |