标准号 |
中文名称 |
英文名称 |
EN ISO 6330-2000 |
纺织品试验时采用的家庭洗涤和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000) |
EN ISO 6346-1995 |
集装箱代码、识别和标记 |
Freight containers - Coding, identification and marking (ISO 6346:1995) |
EN ISO 6360-1-2004 |
牙医学.旋转器械的数字编码系统.第1部分:一般特点 |
|
EN ISO 6360-2-2004 |
牙科学.旋转器械用数字编码体系.第2部分:形状 |
|
EN ISO 6360-4-2004 |
牙科学.旋转器械数字编码体系.第4部分:金刚石器械的特性 |
|
EN ISO 6360-6-2004 |
牙科学.旋转器械数字编码体系.第6部分:磨削器械特性 |
|
EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第1部分:裤型撕裂法 |
|
EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第2部分:埃尔曼多法 |
|
EN ISO 6385-2004 |
工作系统设计的人类工效原则 |
|
EN ISO 6401-2004 |
塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 |
|
EN ISO 6402-1-2002 |
塑料丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
EN ISO 6402-2-1999 |
塑料耐冲击丙烯腈/苯乙烯模塑和挤塑材料(ASE,AES,ACS),丁二烯改型除外第2部分:试验样品的准备与性能 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994) |
EN ISO 6410-1-1996 |
技术制图螺钉和螺纹部件第1部分:通用规范 |
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993) |
EN ISO 6410-2-1996 |
技术制图螺钉和螺纹部件第2部分:螺蚊嵌镶件 |
Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993) |
EN ISO 6410-3-1996 |
技术制图螺钉和螺纹部件第3部分:简化表示 |
Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:1993) |
EN ISO 6411-1997 |
技术制图中心孔的简化画法 |
Technical drawings - Simplified representation of centre holes (ISO 6411:1982) |
EN ISO 6412-1-1994 |
技术制图管道的简化表示法第1部分:通则和正交表示法 |
Technical drawings - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:1989) |
EN ISO 6412-2-1994 |
技术制图管道的简化表示法第2部分:等角投影 |
Technical drawings - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:1989) |
EN ISO 6412-3-1996 |
技术制图管道的简化表示法第3部分:通风和排放系统终端部件 |
Technical drawings - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:1993) |
EN ISO 6413-1994 |
技术制图花键和锯齿型花键的表示法 |
Technical drawings - Representation of splines and serrations (ISO 6413:1988) |
EN ISO 6414-1994 |
玻璃器皿的技术制图 |
Technical drawings for glassware (ISO 6414:1982) |
EN ISO 642-1999 |
钢末端淬透性试验(乔米尼试验) |
Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
EN ISO 6427-1998 |
塑料有机溶剂萃取物的测定(常规法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992) |
EN ISO 6428-1999 |
技术制图微缩复制的要求 |
Technical drawings - Requirements for microcopying (ISO 6428:1982) |
EN ISO 643-2003 |
钢表观粒度的微观测定 |
Steels - Micrographic determination of the apparent grain size (ISO 643:2003) |
EN ISO 6433-1994 |
技术制图零件标引 |
Technical drawings - Item references (ISO 6433:1981) |
EN ISO 6468-1996 |
水质有机氯杀虫剂、多氯联苯和氯苯类的测定液体之间萃取后的气相色谱法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction (ISO 6468:1996) |
EN ISO 6506-1-1999 |
金属材料布氏硬度试验第1部分:试验方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999) |
EN ISO 6506-2-1999 |
金属材料布氏硬度试验第2部分:试验机器的验证和校准 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:1999) |
EN ISO 6506-3-1999 |
金属材料布氏硬度试验第3部分:基准块的校准 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999) |
EN ISO 6507-1-1997 |
金属材料维氏硬度试验第1部分:试验方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997) |
EN ISO 6507-2-1997 |
金属材料维氏硬度试验第2部分:试验机器的验证 |
Metallic materials - Vickers hardness test - Part 2: Verification of testing machines (ISO 6507-2:1997) |
EN ISO 6507-3-1997 |
金属材料维氏硬度试验第3部分:基准块的校准 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks (ISO 6507-3:1997) |
EN ISO 6508-1-1999 |
金属材料洛氏硬度试验第1部分:试验方法(A,B,C,D,E,F,G,H,K,N,T) |
Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)(ISO 6508-1:1999) |
EN ISO 6508-2-1999 |
金属材料洛氏硬度试验第2部分:试验机器的验证和校准 (A,B,C,D,E,F,G,H,K,N,T) |
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, NT 6508-2:1999) |
EN ISO 6508-3-1999 |
金属材料布氏硬度试验第3部分:基准块的校准(A,B,C,D,E,F,G,H,K,N,T) |
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)(ISO 6508-3:1999) |
EN ISO 6509-1995 |
金属与合金的腐蚀黄铜耐脱锌性的测定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
EN ISO 6520-1-1998 |
焊接和相关工艺金属材料中几何缺陷的分类第1部分:熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998) |
EN ISO 6520-2-2001 |
焊接和相关工艺金属材料中几何缺陷的分类第2部分:压力焊接 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001) |
EN ISO 6529-2001 |
防护服化学制品的防护防护服材料对水和气的抗渗透性测试 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
EN ISO 6551-1995 |
石油液体和气体动态测量的精度和可靠性电脉冲数据和/或电子脉冲数据的电缆传输 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982) |
EN ISO 6570-2004 |
天然气.烃液潜在含量的测定.重量分析法 |
|
EN ISO 6579-2002 |
食品及动物饲料微生物学 检测沙门氏菌spp的水平法(ISO 6579:1993,修改) |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp (ISO 6579:2002) |
EN ISO 658-2002 |
油籽杂质含量的测定 |
Oilseeds - Determination of content of impurities (ISO 658:2002) |
EN ISO 659-1998 |
油籽含油量的测定(参照法) |
Oilseeds - Determination of oil content (Reference method) (ISO 659:1998) |
EN ISO 660-1999 |
动植物油脂酸价和酸度的测定 |
Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:1996) |
EN ISO 6603-1-2000 |
塑料硬质塑料冲孔性能的测定第1部分:非仪器冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000) |
EN ISO 6603-2-2000 |
塑料硬质塑料冲孔性能的测定第2部分:仪器冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
EN ISO 661-1995 |
动植物油脂试样的制备 |
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:1989) |
EN ISO 662-2000 |
动植物油脂水分和挥发物含量的测定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998) |
EN ISO 663-2001 |
动植物油脂不溶性杂质含量的测定 |
Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2000) |
EN ISO 664-1995 |
含油种籽实验室试样缩分为试验试样 |
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:1990) |
EN ISO 665-2000 |
油籽水分和挥发物含量的测定 |
Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000) |
EN ISO 6682-1995 |
土方机械操纵的舒适区域和可及范围 |
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986 including Amendment 1:1989) |
EN ISO 6683-1999 |
土方机械座椅安全带和座椅安全带固定器 |
Earth-moving machinery - Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990) |
EN ISO 6708-1995 |
管件公称尺寸的定义和选择 |
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
EN ISO 6721-1-2002 |
塑料动态机械性能的测定第1部分:一般原则 |
Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2001) |
EN ISO 6721-2-1996 |
塑料动态机械性能的测定第2部分:扭摆法 |
Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995) |
EN ISO 6721-3-1996 |
塑料动态机械性能的测定第3部分:弯曲振动共振法 |
Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:1994, including Technical Corrigendum 1:1995) |
EN ISO 6743-4-2001 |
润滑剂、工业润滑油和有关产品(L类)分类第4部分:H组(液压系统) |
Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999) |
EN ISO 6744-1-2004 |
色漆和清漆用粘合剂.醇酸树脂.第1部分:通用试验方法 |
|
EN ISO 6744-2-2004 |
色漆和清漆用粘合剂.醇酸树脂.第2部分:邻苯二甲酸酐含量的测定 |
|
EN ISO 6744-3-2004 |
色漆和清漆用粘合剂.醇酸树脂.第3部分:非皂化物含量的测定 |
|
EN ISO 6744-4-2004 |
色漆和清漆用粘合剂.醇酸树脂.第4部分:脂肪酸含量的测定 |
|
EN ISO 6789-2003 |
螺钉和螺母装配工具 手动扭矩工具 设计的一致性试验、质量的一致性试验和重新校准程序的条件和试验方法 |
Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
EN ISO 6800-1997 |
动植物油脂两种状态三酸甘油酯中脂肪酸成分的测定 |
Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules (ISO 6800:1997) |
EN ISO 6803-1997 |
橡胶或塑料软管和软管组件无弯曲的液压脉冲试验 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994) |
EN ISO 6806-1995 |
油燃烧器用软管和软管组件规范 |
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992) |
EN ISO 6808-2000 |
给排油用塑料软管和软管组件规范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999) |
EN ISO 6817-1995 |
封闭管道中导电液体流量的测量采用电磁流率计的方法 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters (ISO 6817:1992) |
EN ISO 683-17-1999 |
热处理钢、合金钢和易切钢第17部分:滚球和滚柱轴承钢 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999) |
EN ISO 6845-2003 |
表面活性剂 工业用碱性磺酸盐 碱性单磺酸盐的平均相对分子量和碱性单磺酸盐含量的测定 |
Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989) |
EN ISO 6847-2001 |
焊接耗材化学分析用焊接金属的熔敷 |
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000) |
EN ISO 6860-1995 |
色漆和清漆弯曲试验(锥体心轴) |
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984) |
EN ISO 6865-2000 |
动物饲料粗纤维含量的测定中级过滤法 |
Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000) |
EN ISO 6867-2000 |
动物饲料维生素E含量的测定高效液相色谱法 |
Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000) |
EN ISO 6869-2000 |
动物饲料钙、铜、铁、镁、锰、钾、钠和锌含量的测定原子吸收光谱法 |
Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000) |
EN ISO 6871-2-1996 |
牙科贱金属铸造合金第2部分:镍基合金 |
Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994) |
EN ISO 6872-1998 |
牙科烤瓷 |
Dental ceramic (ISO 6872:1995) |
EN ISO 6873-2000 |
牙科石膏制品 |
Dental gypsum products (ISO 6873:1998) |
EN ISO 6875-1996 |
牙科设备牙科病人用椅 |
Dental equipment - Dental patient chair (ISO 6875:1995) |
EN ISO 6876-2002 |
牙根管充填材料 |
Dental root canal sealing materials (ISO 6876:2001) |
EN ISO 6877-1998 |
牙科牙根管充填尖(牙胶尖) |
Dental root-canal obturating points (ISO 6877:1995) |
EN ISO 6878-2004 |
水质.磷的测定.第1部分:钼酸铵的光谱测定法 |
|
EN ISO 6885-2000 |
动植物油脂茴香胺值的测定 |
Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:1998) |
EN ISO 6887-1-1999 |
食品和动物饲料的微生物学用于微生物检验的试验样品的初始悬浮和十倍制稀释的制备第1部分:初始悬浮和 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (ISO 6887-1) |
EN ISO 6887-2-2003 |
食品和动物饲料的微生物学用于微生物检验的试验样品的初始悬浮和十倍制稀释的制备第2部分:肉与肉类产 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO 6887-2:2003) |
EN ISO 6887-3-2003 |
食品和动物饲料的微生物学用于微生物检验的试验样品的初始悬浮和十倍制稀释的制备第3部分:鱼和鱼业产 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 3: Specific rules for the preparation of fish and fishery products (ISO 6887-3:2003) |
EN ISO 6887-4-2003 |
食品和动物饲料的微生物学用于微生物检验的试验样品的初始悬浮和十倍制稀释的制备第4部分:牛奶与牛奶 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products other than milk and milk products, meat and me |
EN ISO 6888-3-2003 |
食品和动物饲料的微生物学 凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法第3部分:微量探 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers (ISO 6888-3:2003) |
EN ISO 6926-2001 |
声学声功率级测定用的基准声源的性能和校正的要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000) |
EN ISO 694-2001 |
船舶与海上技术磁罗盘在船上定位 |
Ships and marine technology - Positioning of magnetic compasses in ships (ISO 694:2000) |
EN ISO 6940-1995 |
纺织织物燃烧性能垂直向样品易点燃性的测定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:1984, including Amendment 1:1993) |
EN ISO 6940-2004 |
纺织织物.燃烧性能.垂直向样品易点燃性的测定 |
|
EN ISO 6941-1995 |
纺织织物燃烧性能垂直向样品火焰蔓延性的测定 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:1984, including Amendment 1:1992) |
EN ISO 6942-2002 |
防护服 耐热和耐火防护 试验方法:暴露于辐射热源时对材料和材料套件的评定 |
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
EN ISO 6947-1997 |
焊接工作位置倾角与转角的定义 |
Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993) |
EN ISO 6974-1-2001 |
天然气用气相色谱法测定规定的不确定度的组分第1部分:简明分析导则 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1-2000) |
EN ISO 6974-2-2002 |
天然气用气相色谱法测定规定的不确定度的组分第2部分:测量系统的特性和数据处理的统计 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001) |
EN ISO 6974-3-2001 |
天然气用气相色谱法测定规定的不确定度的组分第3部分:用两填充柱测定氢、氦、氧、氮、二氧化碳和C8的 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000) |
EN ISO 6974-4-2001 |
天然气用气相色谱法测定规定的不确定度的组分第4部分:用两柱测定实验室和在线测量系统用的氮、二氧化 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:20 |
EN ISO 6974-5-2001 |
天然气用气相色谱法测定规定的不确定度的组分第5部分:用三柱测定实验室和在线外处理用的氮、二氧化碳 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974 |
EN ISO 6988-1994 |
金属和其他无机覆盖层通常凝露条件下的二氧化硫腐蚀试验 |
Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:985) |
EN ISO 7027-1999 |
水质浊度的测定 |
Water quality - Determination of turbidity (ISO 7027:1999) |
EN ISO 7029-2000 |
声学听阈和年龄的关系的统计分布 |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000) |
EN ISO 703-1-1999 |
输送带挠性驱动和成槽性第1部分:试验方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999) |
EN ISO 7040-1997 |
有效力矩型六角螺母(非金属嵌件)1型性能等级5、8和10级 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997) |
EN ISO 7042-1997 |
有效力矩型六角螺母性能等级5、8、10和12级 |
Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 (ISO 7042:1997) |
EN ISO 7045-1994 |
H或Z型十字槽盘头螺钉产品等级A级 |
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994) |
EN ISO 7046-1-1994 |
H或Z型十字槽沉头(通用头型)螺钉产品等级A级第1部分:性能等级钢4.8级 |
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:1994) |
EN ISO 7046-2-1994 |
十字槽沉头(通用头型)螺钉产品等级A级第2部分:性能等级钢8.8级、不锈钢和有色金属 |
Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals (ISO 7046-2:1990) |
EN ISO 7047-1994 |
H或Z型十字槽半沉头(通用头型)螺钉产品等级A级 |
Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994) |
EN ISO 7048-1998 |
十字槽圆柱头螺钉 |
Cross recessed cheese head screws (ISO 7048:1998) |
EN ISO 7049-1994 |
十字槽盘头自攻螺钉 |
Cross recessed pan head tapping screws (ISO 7049:1983) |
EN ISO 7050-1994 |
十字槽沉头(通用头型)自攻螺钉 |
Cross recessed countersunk (flat) head tapping screws (common head style) (ISO 7050:1983) |
EN ISO 7051-1994 |
十字槽半沉头(通用头型)自攻螺钉 |
Cross recessed raised countersunk (oval) head tapping screws (ISO 7051:1983) |
EN ISO 707-1997 |
乳和乳制品取样指南 |
Milk and milk products - Guidance on sampling (ISO 707:1997) |
EN ISO 7083-1994 |
技术制图几何形位公差的符号比例和尺寸 |
Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983) |
EN ISO 7085-1999 |
表面淬硬并回火的米制自挤螺钉机械和工作性能要求 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999) |
EN ISO 7089-2000 |
平垫圈标准系列产品等级A级 |
Plain washers - Normal series - Product grade A (ISO 7089:2000) |