标准号 |
中文名称 |
英文名称 |
DIN ISO/TS 12180-2-2005 |
产品几何量技术规范(GPS).圆柱度.第2部分:规范操作人员 |
|
DIN ISO/TS 12180-2-2005 |
产品几何量技术规范(GPS).圆柱度.第2部分:规范操作人员 |
|
DIN ISO/TS 12181-1-2005 |
产品几何量技术规范(GPS).圆度.第1部分:圆度的词汇和参数 |
|
DIN ISO/TS 12181-1-2005 |
产品几何量技术规范(GPS).圆度.第1部分:圆度的词汇和参数 |
|
DIN ISO/TS 12181-2-2005 |
产品几何量技术规范(GPS).圆度.第2部分:规范操作人员 |
|
DIN ISO/TS 12181-2-2005 |
产品几何量技术规范(GPS).圆度.第2部分:规范操作人员 |
|
DIN ISO/TS 12780-1-2005 |
产品几何量技术规范(GPS).平直度.第1部分:平直度的词汇和参数 |
|
DIN ISO/TS 12780-1-2005 |
产品几何量技术规范(GPS).平直度.第1部分:平直度的词汇和参数 |
|
DIN ISO/TS 12780-2-2005 |
产品几何量技术规范(GPS).平直度.第2部分:规范操作人员 |
|
DIN ISO/TS 12780-2-2005 |
产品几何量技术规范(GPS).平直度.第2部分:规范操作人员 |
|
DIN ISO/TS 12781-1-2005 |
产品几何量技术规范(GPS).平整度.第1部分:平整度的词汇和参数 |
|
DIN ISO/TS 12781-1-2005 |
产品几何量技术规范(GPS).平整度.第1部分:平整度的词汇和参数 |
|
DIN ISO/TS 12781-2-2005 |
产品几何量技术规范(GPS).平整度.第2部分:规范操作人员 |
|
DIN ISO/TS 12781-2-2005 |
产品几何量技术规范(GPS).平整度.第2部分:规范操作人员 |
|
DIN ISO/TS 14907-1-2005 |
道路运输和交通远程信息处理技术.电子收费.用户和固定设备的试验规程.第1部分:试验规程的描述 |
|
DIN ISO/TS 14907-1-2005 |
道路运输和交通远程信息处理技术.电子收费.用户和固定设备的试验规程.第1部分:试验规程的描述 |
|
DIN ISO/TS 15530-3-2005 |
产品几何量技术规范(GPS).坐标测量机(CMM):测量不确定度的测定技术.第3部分:标定工件或标准的使用 |
|
DIN ISO/TS 15694-2004 |
机械振动和冲击.从手持和手控机械到手-臂体系的单冲击传输的测量和评价 |
|
DIN ISO/TS 15874-7-2004 |
冷热水装置用塑料管道设备.聚丙烯(PP).第7部分:合格评定指南 |
|
DIN ISO/TS 15875-7-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第7部分:合格评定指南 |
|
DIN ISO/TS 15876-7-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第7部分:合格评定指南 |
|
DIN ISO/TS 15877-7-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第7部分:合格评定指南 |
|
DIN ISO/TS 17226-2004 |
皮革.化学试验.甲醛含量的测定 |
(Leather - Chemical tests - Determination of formaldehyde content (ISO/TS 17226:2003); German version CEN ISO/TS 17226:2003) |
DIN ISO/TS 17226-2004 |
皮革.化学试验.甲醛含量的测定 |
|
DIN ISO/TS 17234-2004 |
皮革.化学试验.染色皮革中某些偶氮色剂含量的测定 |
(Leather - Chemical tests - Determination of certain azo colourants in dyed leathers (ISO/TS 17234:2003); German version CEN ISO/TS 17234:2003) |
DIN ISO/TS 17234-2004 |
皮革.化学试验.染色皮革中某些偶氮色剂含量的测定 |
|
DIN ISO/TS 17263-2005 |
自动车辆和设备识别.货物联运.系统参数 |
|
DIN ISO/TS 17573-2004 |
道路运输和交通远程信息管理.电子收费.车辆相关的运输服务用系统的体系结构 |
|
DIN ISO/TS 17574-2005 |
道路运输和交通远程信息管理.电子收费(EFC).EFC安全防护轮廓指南 |
|
DIN ISO/TS 17892-1-2005 |
土工调查和试验.土壤的实验室试验.第1部分:水含量的测定 |
|
DIN ISO/TS 17892-10-2005 |
土工调查和试验.土壤的实验室试验.第10部分:直接剪切试验 |
|
DIN ISO/TS 17892-11-2005 |
土工调查和试验.土壤的实验室试验.第11部分:常压头和降水头渗透率的测定 |
|
DIN ISO/TS 17892-12-2005 |
土工调查和试验.土壤的实验室试验.第12部分:阿特伯格极限塑限的测定 |
|
DIN ISO/TS 17892-2-2005 |
土工调查和试验.土壤的实验室试验.第2部分:细粒状土壤的密度测定 |
|
DIN ISO/TS 17892-3-2005 |
土工调查和试验.土壤的实验室试验.第3部分:比重瓶测量分析法测定颗粒密度 |
|
DIN ISO/TS 17892-4-2005 |
土工调查和试验.土壤的实验室试验.第4部分:粒度大小分布的测定 |
|
DIN ISO/TS 17892-5-2005 |
土工调查和试验.土壤的实验室试验.第5部分:增加负荷渗压仪试验 |
|
DIN ISO/TS 17892-6-2005 |
土工调查和试验.土壤的实验室试验.第6部分:落锥试验 |
|
DIN ISO/TS 17892-7-2005 |
土工调查和试验.土壤的实验室试验.第7部分:细粒土的无侧限压缩试验 |
|
DIN ISO/TS 17892-8-2005 |
土工调查和试验.土壤的实验室试验.第8部分:松散的不排水三轴向试验 |
|
DIN ISO/TS 17892-9-2005 |
土工调查和试验.土壤的实验室试验.第9部分:水饱和土壤的渗压三轴向压缩试验 |
|
DIN ISO/TS 20836-2005 |
食品和动物饲料微生物学.食物病原体检测的聚合酶链式反应(PRC).热循环控制装置的性能检测 |
|
DIN ISO/TS 21432-2005 |
无损检验.用中子衍射测定残余应力的标准试验方法 |
|
DIN ISO/TS 8662-11-2004 |
便携式手持动力工具.手柄振动测量.第11部分:接合件传动工具(钉钉板) |
|
DIN V ENV ISO 10722-1-1998 |
建工用纺织物及其相关产品.模拟安装时产生的破损的方法.第1部分:颗粒材料中的安装 |
(Geotextiles and geotextile-related products - Procedure for simulation damage during installation - Part 1: Installation in granular materials (ISO 10722-1:1998); German version ENV ISO 10722-1:1998) |
DIN V ENV ISO 11079-1998 |
寒冷环境的评估.所要求的服装隔热的测定(IREQ) |
(Evaluation of cold environments - Determination of required clothing insulation (IREQ) (ISO/TR 11079:1993); German version ENV ISO 11079:1998) |
DIN V ENV ISO 11133-1-2000 |
食品和动物饲料的微生物学.培养基的制备和生产指南.第1部分:实验室培养基制备质量保证的通用导则 |
(Microbiology of food and animal feedings stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2000); German version ENV |
DIN V ENV ISO 13438-1999 |
土工织物和土工织物相关产品.抗氧化测定用筛选试验方法 |
(Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/TR 13438:1999); German version ENV ISO 13438:1999) |
DIN V ENV ISO 13530-1999 |
水质.水质分析的分析质量控制指南 |
(Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997); German version ENV ISO 13530:1998) |
DIN V ENV ISO 13843-2001 |
水质.微生物法证实的指南 |
(Water quality - Guidance on validation of microbiological methods (ISO/TR 13843:2000); German version ENV ISO 13843:2001) |
DIN V ENV ISO 14819-3-2002 |
交通业务和旅行信息(TTI).经由交通业务信息编码的TTI信息.第3部分:ALERT-C参考位置 |
(Traffic and traveller information (TTI) - TTI Messages via traffic message coding - Part 3: Location referencing for ALERT-C (ISO/TS 14819-3:2000); English version ENV ISO 14819-3:2000) |
DIN V ENV ISO 14904-2004 |
道路交通和交通远程信息管理.电子收费.操作员之间票据结算接口的规范 |
|
DIN V ENV ISO 8502-1-1999 |
涂料和有关产品使用前的钢基底的制备.表面清洁度的评定试验.第1部分:可溶性铁腐蚀产物的现场试验 |
(Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991); German version ENV ISO 8502-1:1999) |
DIN-Fachbericht CEN ISO/TR 11610-2004 |
防护服.词汇 |
|
DIN-Fachbericht CEN ISO/TR 17844-2004 |
焊接.防止冷裂的标准化方法的比较 |
|
DIN-Fachbericht ISO/TR 10017-2004 |
ISO 9001-2000的统计技术指南 |
|
DIN-Fachbericht ISO/TR 14062-2003 |
环境管理.使环境问题与产品设计和开发相结合 |
(Environmental management - Integrating environmental aspects into product design and development; German and english Version ISO/TR 14062:2002) |
EN ISO 1-2002 |
产品几何量技术规范(GPS)产品几何量技术规范和确认的标准温度 |
Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specifications and verification (ISO 1:2002) / Note: Endorsement notice |
EN ISO 10007-1996 |
质量管理技术状态管理指南 |
Quality management - Guidelines for configuration management (ISO 10007:1995) |
EN ISO 10012-2003 |
测量设备管理系统求 测量设备和测量过程的要求 |
Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
EN ISO 10058-1996 |
菱美矿和白云石化学分析 |
Magnesites and dolomites - Chemical analysis (ISO 10058:1992) |
EN ISO 10062-1995 |
人工环境中低浓度污染气体腐蚀程度的试验 |
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:1991) |
EN ISO 10066-1997 |
软质泡沫聚合材料压缩蠕变性能测定 |
Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991) |
EN ISO 10075-1-2000 |
与心理负荷有关的人类工效学原则第1部分:一般术语和定义 |
Ergonomic principles related to mental work-load - Part 1: General terms and definitions (ISO 10075:1991) |
EN ISO 10075-2-2000 |
与心理负荷有关的人类工效学原则第2部分:设计原则 |
Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996) |
EN ISO 10075-3-2004 |
与心理负荷有关的人类工效学原则.第3部分:心理负荷测量和评估方法的准则和要求 |
|
EN ISO 10077-1-2000 |
门、窗和百叶窗热性能传热系数的计算第1部分:简易法 |
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: Simplified method (ISO 10077-1:2000) |
EN ISO 10077-2-2003 |
门、窗和百叶窗热性能传热系数的计算第2部分:用于框架的数字法 |
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2003) |
EN ISO 10079-1-1999 |
医疗吸引设备第1部分:电动吸引设备安全要求 |
Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements (ISO 10079-1:1999) |
EN ISO 10079-2-1999 |
医疗吸引设备第2部分:手动吸引设备 |
Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999) |
EN ISO 10079-3-1999 |
医疗吸引设备第3部分:真空或用压力驱动吸引设备 |
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999) |
EN ISO 10082-1999 |
塑料酚醛树脂分类和试验方法 |
Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999) |
EN ISO 10088-2001 |
小艇永久安装的燃油系统和固定式燃油柜 |
Small craft - Permanently installed fuel systems and fixed fuel tanks (ISO 10088:2001) |
EN ISO 10093-1998 |
塑料燃烧试验标准火源 |
Plastics - Fire tests - Standard ignition sources (ISO 10093:1998) |
EN ISO 10101-1-1998 |
天然气卡尔·费休法测定天然气中的水第1部分:介绍 |
Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993) |
EN ISO 10101-2-1998 |
天然气卡尔·费休法测定天然气中的水第2部分:滴水法 |
Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993) |
EN ISO 10101-3-1998 |
天然气卡尔·费休法测定天然气中的水第3部分:库仑法 |
Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993) |
EN ISO 10111-2001 |
金属和其他无机覆盖层单位面积质量的测量重量分析法和化学分析方法评述 |
Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000) |
EN ISO 10133-2000 |
小艇电气系统超低压直流装置 |
Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2000) |
EN ISO 10139-2-2001 |
牙科学活动义齿软衬材料第2部分:长期使用的材料 |
Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:1999) |
EN ISO 10209-2-1996 |
技术产品文件词汇第2部分:有关投射方法的术语 |
Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods (ISO 10209-2:1993) |
EN ISO 10211-2-2001 |
建筑结构热桥热流和表面温度计算第2部分:线性热桥 |
Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001) |
EN ISO 10239-2000 |
小艇液化石油气(LPG)系统 |
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2000) |
EN ISO 10240-1996 |
小艇艇主手册 |
Small craft - Owners manual (ISO 10240:1995) |
EN ISO 10240-2004 |
小艇.艇主手册 |
|
EN ISO 10248-1999 |
流体肥料用薄膜排气法消除试样中气泡 |
Fluid fertilizers - De-aeration of suspension samples by film disentrainment (ISO 10248:1996) |
EN ISO 10249-1999 |
流体肥料初步目视检验和物理试验用试样制备 |
Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:1996) |
EN ISO 10253-1998 |
水质用Skeletonema costatum 和Phaeodactylum进行海洋藻类生长抑制试验 |
Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum (ISO 10253:1995) |
EN ISO 10256-2003 |
冰球运动员头部和面部保护器 |
Head and face protection for use in ice hockey (ISO 10256:2003) |
EN ISO 10271-2001 |
牙科用的金属材料腐蚀试验方法 |
Dental metallic materials - Corrosion test methods (ISO 10271:2001) |
EN ISO 10273-2003 |
食品及动物饲料的微生物学推测的致病的耶尔森氏结肠菌落计数的水平法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica (ISO 10273:2003) |
EN ISO 10280-1995 |
钢和铁钛含量的测定二安替比林基代甲烷分光光度法 |
Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:1991) |
EN ISO 10289-2001 |
金属制件上金属和其他无机覆盖层经腐蚀试验的试验试样和制件的评级 |
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999) |
EN ISO 10301-1997 |
水质高挥发性卤代烃的测定气相色谱法 |
Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997) |
EN ISO 10303-210-2002 |
工业自动化系统和集成产品数据表示和交换第210部分:应用协议:电子配件、互连和包装设备 |
Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001) |
EN ISO 10304-1-1995 |
水质离子色谱法测定溶解性氟化物、氯化物、亚硝酸盐、亚磷酸盐、溴化物、硝酸盐和硫酸根离子第1部分: |
Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions - Part 1: Method for water with low contamination (ISO 10304-1:1992) |
EN ISO 10304-2-1996 |
水质离子色谱法测定溶解性阴离子第2部分:对废水中溴化物、氟化物、硝酸盐、亚硝酸盐、亚磷酸盐和硫酸 |
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water (ISO 10304-2:1995) |
EN ISO 10304-3-1997 |
水质离子色谱法测定溶解性阴离子第3部分:铬酸盐、碘化物、亚硫酸盐、硫氰酸盐和硫代硫酸酯的测定 |
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
EN ISO 10304-4-1999 |
水质离子色谱法测定溶解性阴离子第4部分:轻度污染水质中氯酸盐、氯化物、次氯酸盐的测定 |
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997) |
EN ISO 10308-1997 |
金属覆盖层孔隙率试验评述 |
Metallic coatings - Review of porosity tests (ISO 10308:1995) |
EN ISO 10319-1996 |
土工布宽条拉身试验 |
Geotextiles - Wide-width tensile test (ISO 10319:1993) |
EN ISO 10320-1999 |
土工布及相关产品现场鉴别标识 |
Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) |
EN ISO 10321-1996 |
土工布宽条样法对接头/接缝的拉身试验 |
Geotextiles - Tensile test for joints/seams by wide-width method (ISO 10321:1992) |
EN ISO 10322-1-1997 |
眼科光学半成品眼镜白镜片第1部分:单焦点和多焦点白镜片规范 |
Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1: Specifications for single-vision and multifocal lens blanks (ISO 10322-1:1996) |
EN ISO 10322-2-1997 |
眼科光学半成品眼镜白镜片第2部分:渐变焦白镜片规范 |
Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks (ISO 10322-2:1996) |
EN ISO 10323-1995 |
牙科旋转器械切盘和轮的内径 |
Dental rotary instruments - Bore diameters for discs and wheels (ISO 10323:1991) |
EN ISO 10338-1997 |
光学和光学仪器隐形眼镜曲率的确定 |
Optics and optical instruments - Contact lenses - Determination of curvature (ISO 10338:1996) |
EN ISO 10339-1999 |
眼科光学隐形眼镜水凝胶镜片含水量的确定 |
Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses (ISO 10339:1997) |
EN ISO 10340-1996 |
光学和光学仪器因形眼镜确定可渗出物质的方法 |
Optics and optical instruments - Contact lenses - Method for determining the extractable substances (ISO 10340:1995) |
EN ISO 10341-1999 |
眼科仪器折射头 |
Ophthalmic instruments - Refractor heads (ISO 10341:1997) |
EN ISO 10342-2003 |
眼科仪器眼睛折射计 |
Ophthalmic instruments - Eye refractometers (ISO 10342:2003) |
EN ISO 10343-1999 |
眼科仪器检眼仪 |
Ophthalmic instruments - Ophthalmometers (ISO 10343:1997) |
EN ISO 10344-1998 |
光学和光学仪器隐形眼镜接触镜试验用含盐溶液 |
Optics and optical instruments - Contact lenses - Saline solution for contact lens testing (ISO 10344:1996) |
EN ISO 10350-1-2000 |
塑料可比单点数据的采集和表示第1部分:模塑材料 |
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998) |
EN ISO 10350-2-2001 |
塑料可比单点数据的采集和表示第2部分:长纤维增强塑料 |
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001) |
EN ISO 10352-1997 |
纤维增强塑料模塑料和预浸料单位面积质量的测定 |
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:1997) |
EN ISO 10360-2-2001 |
产品几何量技术规范(GPS)坐标测量机(CMM)的验收和复检试验第2部分:所用的坐标测量机械或测量尺寸 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used or measuring size (ISO 10360-2:2001) |
EN ISO 10360-3-2000 |
产品几何量技术规范(GPS)坐标测量机(CMM)的验收和复检试验第3部分:旋转台的轴线作为第四轴线的坐标测 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with a axis of a rotary table as the fourth axis (ISO 10360-3:2000) |
EN ISO 10360-5-2000 |
产品几何量技术规范(GPS)坐标测量机(CMM)的验收和复检试验第5部分:使用多触针探测系统的坐标测量机 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems (ISO 10360-5:2000) |
EN ISO 10360-6-2001 |
产品几何量技术规范(GPS)坐标测量机(CMM)的验收和复检试验第6部分:计算高斯相关特性中误差的评估 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001) |