标准号 |
中文名称 |
英文名称 |
ISO 9327-5-1999 |
压力用途的钢锻件和轧制或锻造的棒材.技术交货条件.第5部分:不锈钢 |
(Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels) |
ISO 9328-1-2003 |
压力用途的扁钢产品.交货技术条件.第1部分:一般要求 |
(Steel flat products for pressure purposes - Technical delivery conditions - Part 1: General requirements ) |
ISO 9328-1-2003 |
压力用途的扁钢产品.交货技术条件.第1部分:一般要求 |
|
ISO 9328-2-1991 |
压力容器用钢板和带材.交货技术条件.第2部分:具有规定室温和高温性能的非合金和低合金钢 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 2: unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties) |
ISO 9328-2-2004 |
压力用途的扁钢制品.交货技术条件.第2部分:规定了高温性能的非合金和合金钢 |
|
ISO 9328-3-1991 |
压力容器用钢板和带材.交货技术条件.第3部分:具有规定低温性能的镍合金钢 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 3: nickel-alloyed steels with specified low temperature properties) |
ISO 9328-3-2004 |
压力用途扁钢产品.交货技术条件.第3部分:正火可焊细粒钢 |
|
ISO 9328-4-1991 |
压力容器用钢板和带材.交货技术条件.第4部分:正火、淬火和回火状态提供的具有高屈服应力的可焊细晶粒钢 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 4: weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition) |
ISO 9328-4-2004 |
压力用途扁钢产品.交货技术条件.第4部分:规定了低温性能的镍合金钢 |
|
ISO 9328-5-1991 |
压力容器用钢板和带材.交货技术条件.第5部分:奥氏体钢 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 5: austenitic steels) |
ISO 9328-5-2004 |
压力用途扁钢产品.交货技术条件.第5部分:热机辊轧可焊细粒钢 |
|
ISO 9328-6-2004 |
压力用途扁钢产品.交货技术条件.第6部分:淬火和回火的可焊接细粒钢 |
|
ISO 9328-7-2004 |
压力用途扁钢产品.交货技术条件.第7部分:不锈钢 |
|
ISO 9329-1-1989 |
受压力的无缝钢管.交货技术条件.第1部分:规定室温性能的非合金钢 |
(Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties) |
ISO 9329-2-1997 |
受压力的无缝钢管.交货技术条件.第2部分:规定高温性能的非合金钢和合金钢 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties) |
ISO 9329-3-1997 |
压力用途的无缝钢管.交货技术条件.第3部分:规定低温性能的非合金钢和合金钢 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties) |
ISO 9329-4-1997 |
受压力的无缝钢管.交货技术条件.第4部分:奥氏体无缝钢 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels) |
ISO 9330-1-1990 |
受压力的焊接钢管.交货技术条件.第1部分:规定室温性能的非合金钢管 |
(Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties) |
ISO 9330-2-1997 |
压力容器用焊接钢管.交货技术条件.第2部分:规定高温性能的电阻焊接和感应焊接非合金钢管和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties) |
ISO 9330-3-1997 |
压力容器用焊接钢管.交货技术条件.第3部分:规定低温性能的电阻焊接和感应焊接非合金钢管和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties) |
ISO 9330-4-2000 |
焊接压力钢管.交货技术条件.第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties) |
ISO 9330-5-2000 |
压力容器用焊接钢管.交货技术条件.第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties) |
ISO 9330-6-1997 |
受压力的焊接钢管.交货技术条件.第6部分:奥氏体不锈钢管的焊接长度 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes) |
ISO 9333-1990 |
镶牙材料 |
(Dental brazing materials) |
ISO 9334-1995 |
光学和光学仪器.光学传递函数.定义和数学关系 |
(Optics and optical instruments - Optical transfer function - Definitions and mathematical relationships) |
ISO 9335-1995 |
光学和光学仪器.光学传递函数.测量原理和程序 |
(Optics and optical instruments - Optical transfer function - Principles and procedures of measurement) |
ISO 9336-1-1994 |
光学和光学仪器.光传递函数的应用.第1部分:35 mm 静物照相机用转换镜头 |
(Optics and optical instruments - Optical transfer function - Application - Part 1: Interchangeable lenses for 35 mm still cameras) |
ISO 9336-2-1994 |
光学和光学仪器.光传递函数的应用.第2部分:办公室复印机用透镜 |
(Optics and optical instruments - Optical transfer function - Application - Part 2: Lenses for office copiers) |
ISO 9336-3-1994 |
光学和光学仪器.光传递函数的应用.第3部分:望远镜 |
(Optics and optical instruments - Optical transfer function - Application - Part 3: Telescopes) |
ISO 9337-1-1999 |
接触镜片.后屈光度的测定.第1部分:手工聚焦的聚焦仪法 |
(Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing) |
ISO 9337-2-2004 |
接触镜.后银顶屈光度的测定.第2部分:浸渍在盐水中的接触镜的测量 |
|
ISO 9338-1996 |
光学和光学仪器.接触眼镜片直径的测定 |
(Optics and optical instruments - Contact lenses - Determination of the diameters) |
ISO 9339-1-1996 |
光学及光学仪器.接触镜片.厚度测定.第1部分:直接接触镜片 |
(Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses) |
ISO 9339-2 Technical Corrigendum 1-2000 |
光学及光学仪器.接触镜片.厚度测定.第2部分:水凝胶接触镜片.技术勘误1 |
(Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1) |
ISO 9339-2-1998 |
光学及光学仪器.接触镜片.厚度测定.第2部分:水凝胶接触镜片 |
(Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses) |
ISO 934-1980 |
动植物脂肪和油.水含量的测定.夹带法 |
(Animal and vegetable fats and oils; Determination of water content; Entrainment method) |
ISO 9340-1996 |
光学及光学仪器.接触镜片.直接接触镜片的应力测定 |
(Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses) |
ISO 9341-1996 |
光学及光学仪器.接触镜片.直接接触镜片中夹杂物和表面不完备性的测定 |
(Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses) |
ISO 9342-1996 |
光学及光学仪器.焦距校正用检验透镜 |
(Optics and optical instruments - Test lenses for calibration of focimeters) |
ISO 9343-1988 |
手钳和夹具.滑动结合手钳.尺寸和试验值 |
(Pliers and nippers - Slip joint pliers - Dimensions and test values) |
ISO 9343-2004 |
夹扭钳和剪切钳.鲤鱼钳.尺寸和试验值 |
|
ISO 9344-1996 |
光学和光学仪器.显微镜.目镜的分度 |
(Optics and optical instruments - Microscopes - Graticules for eyepieces) |
ISO 9345-1-1996 |
光学和光学仪器.显微镜.有关机械参考面投影距离.第1部分:160mm长的管 |
(Optics and optical instruments - Microscopes - Imaging distances related to mechanical reference planes - Part 1: Tube length 160 mm) |
ISO 9345-2-2003 |
光学和光学仪器.显微镜.相对机械参考面的象距.第2部分:无限大光学校正系统 |
(Optics and optical instruments - Microscopes: Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems) |
ISO 9345-2-2003 |
光学和光学仪器.显微镜.相对机械参考面的象距.第2部分:无限大光学校正系统 |
|
ISO 9346 AMD 1-1996 |
隔热.质量转移.物理量和定义.修改件1 |
(Thermal insulation - Mass transfer - Physical quantities and definitions; Amendment 1) |
ISO 9346-1987 |
热绝缘.质量转移.物理量和定义 |
(Thermal insulation - Mass transfer - Physical quantities and definitio) |
ISO 9349-1991 |
预绝缘高强度铸铁管道系统 |
(Preinsulated ductile iron pipeline systems) |
ISO 9349-2004 |
预绝缘球墨铸铁管道系统 |
|
ISO 9349-2004 |
预绝缘球墨铸铁管道系统 |
|
ISO 935-1988 |
动植物脂肪和油.滴定度的测定 |
(Animal and vegetable fats and oils; determination of titre) |
ISO 9352-1995 |
塑料.用磨轮对抗磨耗性能的测定 |
(Plastics - Determination of resistance to wear by abrasive wheels) |
ISO 9353-1991 |
玻璃增强塑料.膜袋模塑单向增强板的制备 |
(Glass-reinforced plastics; preparation of plates with unidirectional reinforcements by bag moulding) |
ISO 9354 Technical Corrigendum 1-2000 |
纺织材料.编织.编码系统和实例.技术勘误1 |
(Textiles - Weaves - Coding system and examples; Technical Corrigendum 1) |
ISO 9354-1989 |
纺织品.织法.代码和实例 |
(Textiles; weaves; coding system and examples) |
ISO 9355-1-1999 |
显示和控制调节器设计的人类工效学要求.第1部分:用户与显示和控制调节器的相互作用 |
(Ergonomic requirements for the design of displays and control actuators - Part 1: Human interactions with displays and control actuators) |
ISO 9355-2-1999 |
显示和控制调节器设计的人类工效学要求.第2部分:显示 |
(Ergonomic requirements for the design of displays and control actuators - Part 2: Displays) |
ISO 9356-1989 |
带或不带连接管件的聚烯烃管总成.抗内压.试验方法 |
(Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method) |
ISO 9357-1990 |
作物保护设备.农用喷雾器.药罐容积和灌注口直径 |
(Equipment for crop protection; agricultural sprayers; tank nominal volume and filling hole diameter) |
ISO 9358-1994 |
光学及光学仪器.成像系统的纱幕眩光.测量的定义及方法 |
(Optics and optical instruments - Veiling glare of image-forming systems - Definitions and methods of measurement) |
ISO 9359-1989 |
空气质量.环境空气质量评定用分层取样法 |
(Air quality; stratified sampling method for assessment of ambient air quality) |
ISO 936-1998 |
肉和肉制品.总灰分的测定 |
(Meat and meat products - Determination of total ash) |
ISO 9360-1-2000 |
麻醉和呼吸设备.使人体呼吸气体增湿的热和潮气交换(HMEs).第1部分:与最小潮量一起使用的热和潮气交换 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml) |
ISO 9360-2-2001 |
麻醉和呼吸设备.使人体呼吸气体增湿的热和潮气交换器(HMEs).第2部分:潮气量最小为250ml的气管造口病人用热 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml) |
ISO 9361-1-1991 |
可转位镶齿刀具.圆角陶瓷镶齿刀片.第2部分:无固定孔镶齿刀片的尺寸 |
(Indexable inserts for cutting tools; ceramic inserts with rounded corners; part 1: dimensions of inserts without fixing hole) |
ISO 9361-2-1991 |
可转位镶齿刀具.圆角陶瓷镶齿刀片.第3部分:具有圆柱形固定孔的镶齿刀片的尺寸 |
(Indexable inserts for cutting tools; ceramic inserts with rounded corners; part 2: dimensions of inserts with cylindrical fixing hole) |
ISO 9362-1994 |
银行事务.银行事务远程通讯电报.银行鉴别码 |
(Banking - Banking telecommunication messages - Bank identifier codes) |
ISO 9363-1-1994 |
光学和光学议器.接触镜片.接触镜片材料的致癌性的测定.第1部分:琼酯用作细菌固体培养基中的支持物的免疫扩 |
(Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test) |
ISO 9364-2001 |
工业连续热浸镀铝/锌薄钢板.制图和结构特性 |
(Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities) |
ISO 9366-2001 |
整体地板软木弹性砖片.边缘平直度和垂直度的测定与检验 |
(Agglomerated cork floor tiles - Determination of dimensions and deviation from squareness and from straightness of edges) |
ISO 9367-1-1989 |
滚装船上道路车辆捆绑和固定装置.一般要求.第1部分:商业车辆和车辆组合(半挂车除外) |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 1: commercial vehicles and combinations of vehicles, semi-trailers excluded) |
ISO 9367-2-1994 |
滚装船上汽车捆绑和固定装置.一般要求.第2部分:半挂车 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 2: semi-trailers) |
ISO 9368-1-1990 |
用称量法测量封闭管道中液体的流量.测试装置规程.第1部分:静态称量装置 |
(Measurement of liquid flow in closed conduits by the weighing method; procedures for checking installations; part 1: static weighing systems) |
ISO 937-1978 |
肉和肉制品.氮含量的测定(参照法) |
(Meat and meat products; Determination of nitrogen content (Reference method)) |
ISO 9370-1997 |
塑料.风化试验中辐射曝光的仪器测定.一般导则和基本试验方法 |
(Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method) |
ISO 9373-1989 |
起重机和有关设备.试验期间测量参数精确度的要求 |
(Cranes and related equipment; accuracy requirements for measuring parameters during testing) |
ISO 9374-1-1989 |
起重机.提供的信息.第1部分:总则 |
(Cranes; information to be provided; part 1: general) |
ISO 9374-3-2002 |
起重机.应提供的咨询、定购、报价和供应信息.第3部分:塔式起重机 |
(Cranes - Information to be provided for enquiries, orders, offers and supply - Part 3: Tower cranes) |
ISO 9374-4-1989 |
起重机.提供的信息.第4部分:动臂起重机 |
(Cranes; information to be provided; part 4: jib cranes) |
ISO 9374-5-1991 |
起重机.提供的信息.第5部分:桥式起重机和龙门式起重机 |
(Cranes; information to be provided; part 5: overhead travelling cranes and portal bridge cranes) |
ISO 9375-1989 |
木工机械.固定位置的砂轮机.术语 |
(Woodworking machines; disc sanding machines with spindle in fixed position; nomenclature) |
ISO 9376-1988 |
早马铃薯.冷却和冷藏运输指南 |
(Early potatoes; guide to cooling and refrigerated transport) |
ISO 9377-2-2000 |
水质.油气指数的测定.第2部分:溶剂萃取法和气相色谱法 |
(Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography) |
ISO 9378-1993 |
摄影技术.微泡缩微胶片.ISO曝光速度和ISO曝光范围 |
(Photography; vesicular microfilm; determination of ISO speed and ISO range) |
ISO 9379-1989 |
门具.重复开、关门的试验 |
(Doorsets; repeated opening and closing test) |
ISO 938-1975 |
手控台式运货车.基本尺寸 |
(Hand-operated stillage trucks; Principal dimensions) |
ISO 9380-1990 |
门具.反复扭转试验 |
(Doorsets; Repeated torsion test) |
ISO 9381-1989 |
门具.静态扭转试验 |
(Doorsets; static torsion test) |
ISO 9382-1990 |
船载驳.全系列.分类和主要要求 |
(Shipborne barges, all series; classification and main requirements) |
ISO 9383 AMD 1-2004 |
纤维增强水泥制品.屋面用小波瓦或非对称截面瓦和配件.修改件1 |
|
ISO 9383-1995 |
纤维加强水泥制品.屋顶和镶面(建筑物)短波纹或不对称的面板和配件 |
(Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing) |
ISO 9384 AMD 1-2004 |
纤维水泥背瓦.修改件1 |
|
ISO 9384-1991 |
纤维水泥墙面板 |
(Fibre-cement siding shingles) |
ISO 9385-1990 |
玻璃及玻璃陶瓷.努氏硬度试验 |
(Glass and glass-ceramics; Knoop hardness test) |
ISO 9386-1-2000 |
运动性受损的残疾人用动力操纵的提升平台.安全、尺寸和功能操作规则.第1部分:垂直提升平台 |
(Power-operated lifting platforms for persons with impaired mobility - Rules for safety, dimensions and functional operation - Part 1: Vertical lifting platforms) |
ISO 9386-2-2000 |
运动性受损的残疾人用动力操纵的提升平台.安全、尺寸和功能操作规则.第2部分:在一个倾斜面移动的就座者、站 |
(Power-operated lifting platforms for persons with impaired mobility - Rules for safety, dimensions and functional operation - Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane) |
ISO 9388-1992 |
镍合金.磷含量测定.钼兰分子吸收光谱法 |
(Nickel alloys; determination of phosphorus content; molybdenum blue molecular absorption spectrometric method) |
ISO 939-1980 |
香料和调味品.水含量的测定.挟带法 |
(Spices and condiments; Determination of moisture content; Entrainment method) |
ISO 9390-1990 |
水质.硼酸盐的测定.用甲亚胺-H进行的光谱测定法 |
(Water quality; determination of borate; spectrometric method using azomethine-H) |
ISO 9391-1993 |
水质.宏无脊椎生物的深水取样.菌落使用导则 |
(Water quality; sampling in deep waters for macro-invertebrates; guidance on the use of colonization, qualitative and quantitative samplers) |
ISO 9392-1989 |
胶凝软木盘.密封性能 |
(Agglomerated cork discs; sealing behaviour) |
ISO 9393-1-1994 |
热塑性塑料阀门.压力试验方法.第1部分:总则 |
(Thermoplastics valves - Pressure test methods and requirements - Part 1: General) |
ISO 9393-1-2004 |
工业用热塑性阀门.压力试验方法和要求.第1部分:总则 |
|
ISO 9393-2 Technical Corrigendum 1-1997 |
热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 |
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1) |
ISO 9393-2-1997 |
热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 |
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves) |
ISO 9394-1998 |
眼科光学.接触镜片和接触透镜护理制品.用兔眼睛研究目镜法测定生物相溶性 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes) |
ISO 9396-1997 |
塑料.酚醛树脂.在使用自动装置的特殊条件下甲价酚醛树脂凝胶时间的测定 |
(Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus) |
ISO 9397-1995 |
塑料.酚醛树脂.游离甲醛含量的测定 |
(Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method) |
ISO 9398-1-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第1部分:家用织物熨烫机 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 1: Flatwork ironing machines) |
ISO 9398-1-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第1部分:家用织物熨烫机 |
|
ISO 9398-2-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第2部分:间歇式转鼓烘燥机 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers) |
ISO 9398-2-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第2部分:间歇式转鼓烘燥机 |
|
ISO 9398-3-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第3部分:管道式洗涤机 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 3: Washing tunnels) |
ISO 9398-3-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第3部分:管道式洗涤机 |
|
ISO 9398-4-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第4部分:洗涤脱水联合机 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 4: Washer-extractors) |
ISO 9398-4-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.第4部分:洗涤脱水联合机 |
|
ISO 94-1982 |
纺织机械和附件.环锭细纱机和环锭捻线机的锭距 |
(Textile machinery and accessories; Spindle gauges for ring-spinning and ring-doubling frames) |
ISO 940-1979 |
香料和调味品.醇不溶性萃取物的测定 |
(Spices and condiments; Determination of alcohol-soluble extract) |
ISO 9400-1990 |
镍基合金.抗晶间腐蚀性的测定 |
(Nickel-based alloys; determination of resistance to intergranular corrosion) |
ISO 9401-1991 |
机床.电动夹盘的爪 |
(Machine tools; jaw mountings on power chucks) |