标准号 |
中文名称 |
英文名称 |
DIN EN ISO 2870-1994 |
表面活性剂.洗涤剂.酸性条件下可水解的和不可水解的阴离子活性物质的测定 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions (ISO 2870:1986); German version EN ISO 2870:1994 |
DIN EN ISO 2871-1-1994 |
表面活性剂.洗涤剂-阳离子活性物质含量的测定.第1部分:高分子量阳极活性物质 |
Surface active agents - Detergents - Determination of cationic-active matter content; Part 1: High-molecular-mass cationic-active matter (ISO 2871-1-1988); German version EN ISO 2871-1:1994 |
DIN EN ISO 2871-2-1994 |
表面活性剂.洗涤剂,阳离子活性物含量测定.第2部分:低分子团(200-500)的阳离子活性物质 |
Surface active agents - Detergents - Determination of cationic-active matter content; Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:1990); German version EN ISO 2871-1:1994 |
DIN EN ISO 2873-2002 |
包装.满装的运输包装及成组装运.低压试验 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000); German version EN ISO 2873:2002 |
DIN EN ISO 2875-2003 |
包装.完整满装运输包装件和成组装运.喷水试验 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000); German version EN ISO 2875:2002 |
DIN EN ISO 2897-1-1999 |
塑料.耐冲击聚苯乙烯模塑和挤塑材料.第1部分:命名与基础规范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997); German version EN ISO 2897-1:1999 |
DIN EN ISO 2897-2-1999 |
塑料.耐冲击聚苯乙烯模塑和挤塑材料.第2部分:试样制备与基础规范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999 |
DIN EN ISO 2897-2-2004 |
塑料.耐冲击聚苯乙烯(PS-I)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
DIN EN ISO 2898-1-1999 |
塑料.增塑聚氯乙烯(PVC-P)模塑与注塑材料.第1部分:命名与基础规范 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996); German version EN ISO 2898-1:1999 |
DIN EN ISO 2898-2-1999 |
塑料.增塑聚氯乙烯(PVC-P)模塑与注塑材料.第2部分:试样制备与特性测定 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997); German version EN ISO 2898-2:1999 |
DIN EN ISO 291-1997 |
塑料.调节和检验用的标准大气压 |
Plastics - Standard atmospheres for conditioning and testing (ISO 291:1997); German version EN ISO 291:1997 |
DIN EN ISO 2922-2001 |
声学.内河航道和港湾船舶发出的气载噪声的测量 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000); German version EN ISO 2922:2000 |
DIN EN ISO 293-2003 |
塑料.热塑性材料的压塑试样 |
(Plastics - Compression moulding test specimens of thermoplastic materials (ISO 293:1986); German version EN ISO 293:2003) |
DIN EN ISO 293-2005 |
塑料.热塑性材料试样的压模铸造 |
|
DIN EN ISO 294-1-1998 |
塑料.热塑材料试样的注塑.第1部分:一般原理和多用途试样及棒的制造 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998 |
DIN EN ISO 294-2-1998 |
塑料.热塑材料试样的注塑.第2部分:小拉伸棒 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996); German version EN ISO 294-2:1998 |
DIN EN ISO 294-3-1998 |
塑料.热塑材料试样的注塑.第3部分:小板 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:1996); German version EN ISO 294-3:1998 |
DIN EN ISO 294-4-1998 |
塑料.热塑材料试样的注塑.第4部分:模塑收缩的测定 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:1997); German version EN ISO 294-4:1998 |
DIN EN ISO 294-4-2003 |
塑料.热塑材料试样的注塑法.第4部分:模塑收缩率的测定 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003) |
DIN EN ISO 295-1998 |
塑料.热固性材料制试样的压塑 |
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:1991); German version EN ISO 295:1998 |
DIN EN ISO 295-2004 |
塑料.热固性材料试样的压模塑法 |
|
DIN EN ISO 3001-1999 |
塑料.环氧化合物.环氧基当量的测定 |
Plastics - Epoxide compounds - Determination of epoxide equivalent (ISO 3001:1999); German version EN ISO 3001:1999 |
DIN EN ISO 3037-1996 |
瓦楞纤维板.边缘耐压碎性的测定(不涂蜡边法) |
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:1994); German version EN ISO 3037:1995 |
DIN EN ISO 305-1999 |
塑料.聚氯乙烯和有关含聚合物和共聚物及其混合物的热稳定性的测定.色变法 |
Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990); German version EN ISO 305:1999 |
DIN EN ISO 3059-2002 |
无损检验.渗透法检验和磁粉检验.观察条件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001); German version EN ISO 3059:2001 |
DIN EN ISO 306-1997 |
塑料.热塑塑料.维卡(VICAT)软化温度的测定(VST) |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994); German version EN ISO 306:1996 |
DIN EN ISO 306-2004 |
塑料.热塑性材料.维卡特(VICAT)软化温度的测定(VST) |
|
DIN EN ISO 307-1998 |
塑料.聚酰胺.粘度值的测定 |
Plastics - Polyamides - Determination of viscosity number (ISO 307:1994); German version EN ISO 307:1997 |
DIN EN ISO 308-1998 |
塑料.酚醛树脂模塑材料.丙酮可溶成份的测定(未加工状态下模塑材料的表面树脂含量) |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997 |
DIN EN ISO 3095-2005 |
铁路设施.声学.有轨车辆发出噪声的测量 |
|
DIN EN ISO 3098 Bb.1-2001 |
技术制图.字体.字体A用绘图格子 |
Technical drawings - Lettering - Drafting grids for lettering A |
DIN EN ISO 3098 Bb.2-2001 |
技术制图.字体.字体B用绘图格子 |
Technical drawings - Lettering - Drafting grids for lettering B |
DIN EN ISO 3098-0-1998 |
技术产品文献.字体.第0部分:一般要求 |
Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997); German version EN ISO 3098-0:1997 |
DIN EN ISO 3098-2-2000 |
技术产品文献.字体.第2部分:拉丁字母、数字和标记 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks (ISO 3098-2:2000); German version EN ISO 3098-2:2000 |
DIN EN ISO 3098-3-2000 |
技术产品文献.字体.第3部分:希腊字母 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000); German version EN ISO 3098-3:2000 |
DIN EN ISO 3098-4-2000 |
技术产品文献.文字书写.第4部分:拉丁字母的区分标志和特殊标志 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000); German version EN ISO 3098-4:2000 |
DIN EN ISO 3098-5-1998 |
技术产品文献.字体.第5部分:拉丁字母,数字和标志的CAD字体 |
Technical product documentation - Lettering - Part 5: CAD-Lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997); German version EN ISO 3098-5:1997 |
DIN EN ISO 3098-6-2000 |
技术产品文献.字体.第6部分:西里尔字母 |
Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000); German version EN ISO 3098-6:2000 |
DIN EN ISO 3104-1999 |
石油产品.透明和不透明液体.运动粘度的测定和动力粘度的计算 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999 |
DIN EN ISO 3107-2005 |
牙医学.锌氧化物/丁香酸和锌氧化物/非丁香酸粘固粉 |
|
DIN EN ISO 3126-2005 |
塑料管道系统.塑料部件.尺寸测定 |
|
DIN EN ISO 3126-2005 |
塑料管道系统.塑料部件.尺寸测定 |
|
DIN EN ISO 3146 Berichtigung 1-2003 |
DIN EN ISO 3146-2002的勘误 |
Corrigenda to DIN EN ISO 3146:2002-06 (EN ISO 3146:2000/AC:2002) |
DIN EN ISO 3146-2002 |
塑料.毛细管和偏振光显微镜法测定半晶状聚合物的熔化性能(熔化温度或熔化区域) |
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000); German version EN ISO 3146:2000 |
DIN EN ISO 3164-1999 |
土方机械.保护结构的实验室评定.极限偏差容量规范 |
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995); German version EN ISO 3164:1999 |
DIN EN ISO 3166-1-1998 |
国家和他们的地区名的表示代码.第1部分:地区代码 |
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:1997); German version EN ISO 3166-1:1997 |
DIN EN ISO 3167-1997 |
塑料.多用途试样 |
Plastics - Multipurpose-test specimens (ISO 3167:1993); German version EN ISO 3167:1996 |
DIN EN ISO 3170-1999 |
液态石油.人工取样(ISO 3170:1988 含修改件1:1998) |
Petroleum liquids - Manual sampling (ISO 3170:1988, including Amendment 1:1998); German version EN ISO 3170:1998 |
DIN EN ISO 3170-2004 |
石油液体.人工采样 |
|
DIN EN ISO 3171-2000 |
石油液态产品.管道自动取样 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999 |
DIN EN ISO 3175-1-1998 |
纺织物.干洗和最终处理.第1部分:纺织物和衣物清洗合格评定 |
Textiles - Dry cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments (ISO 3175-1:1998); German version EN ISO 3175-1:1998 |
DIN EN ISO 3175-2-1998 |
纺织物.干洗和最终处理.第2部分:四氯乙烷法 |
Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998); German version EN ISO 3175-2:1998 |
DIN EN ISO 3175-3-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第3部分:用烃溶剂清洁和整理时的性能测试程序 |
(Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2003); German version of EN ISO 3175-3:2003) |
DIN EN ISO 3175-3-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第3部分:用烃溶剂清洁和整理时的性能测试程序 |
|
DIN EN ISO 3175-4-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第4部分:用模拟湿洗清洁和整理时的性能测试程序 |
(Textiles - Professional care, drycleaning and wetcleaning of textiles - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003); German version EN ISO 3175-4:2003) |
DIN EN ISO 3175-4-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第4部分:用模拟湿洗清洁和整理时的性能测试程序 |
|
DIN EN ISO 3188-1994 |
淀粉及其制品.用克耶达(Kjeldahl)法测定含氮量.滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method (ISO 3188:1978); German version EN ISO 3188:1994 |
DIN EN ISO 3219-1994 |
塑料.液态或起乳液或分散剂作用的聚合物/树脂.使用规定剪切率的旋转式粘度计测定粘度 |
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993); German version EN ISO 3219:1994 |
DIN EN ISO 3231-1998 |
色漆和清漆.对含二氧化硫潮湿空气的耐抗性的测定 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993); German version EN ISO 3231:1997 |
DIN EN ISO 3248-2000 |
涂料和清漆.热效应的测定 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998); German version EN ISO 3248:2000 |
DIN EN ISO 3251-1995 |
色漆和清漆.色漆、清漆和色漆-清漆粘合剂中非挥发物质的测定 |
Paint and varnishes - Determination of the non-volatile matter of paints, varnishes and binders for paints and varnishes (ISO 3251:1993); German version EN ISO 3251:1995 |
DIN EN ISO 3251-2003 |
色漆、清漆和塑料.非挥发物质含量的测定 |
(Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003); German version EN ISO 3251:2003) |
DIN EN ISO 3252-2001 |
粉末冶金.词汇 |
Powder metallurgy - Vocabulary (ISO 3252:1999); German version EN ISO 3252:2000 |
DIN EN ISO 3262-1-1998 |
涂料用填充剂.要求和检验方法.第1部分:导言和一般检验方法 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997); German version EN ISO 3262-1:1998 |
DIN EN ISO 3262-10-2001 |
涂料用填充剂.规范和试验方法.第10部分:片状天然滑石/亚氯酸盐 |
Extenders for paints - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000); German version EN ISO 3262-10:2000 |
DIN EN ISO 3262-11-2001 |
涂料用填充剂.规范和试验方法.第11部分:含碳酸盐的片状天然滑石 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000); German version EN ISO 3262-11:2000 |
DIN EN ISO 3262-12-2002 |
涂料用填充剂.规范和试验方法.第12部分:白云母类云母 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001); German version EN ISO 3262-12:2001 |
DIN EN ISO 3262-13-1998 |
涂料用填充料.要求和检验方法.第13部分:天然石英(已磨碎) |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997); German version EN ISO 3262-13:1998 |
DIN EN ISO 3262-14-2000 |
涂料用填充剂.试验规范和试验方法.第14部分:白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); German version EN ISO 3262-14:2000 |
DIN EN ISO 3262-15-2000 |
涂料用填充剂.试验规范和试验方法.第15部分:石英玻璃 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000); German version EN ISO 3262-15:2000 |
DIN EN ISO 3262-16-2000 |
涂料用填充剂.规范和试验方法.第16部分:氢氧化铝 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000); German version EN ISO 3262-16:2000 |
DIN EN ISO 3262-17-2000 |
涂料用填充剂.规范和试验方法.第17部分:沉淀硅酸钙 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000); German version EN ISO 3262-17:2000 |
DIN EN ISO 3262-18-2000 |
涂料用填充剂.规范和试验方法.第18部分:沉淀硅铝酸钠 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000); German version EN ISO 3262-18:2000 |
DIN EN ISO 3262-19-2000 |
涂料用填充剂.规范和试验方法.第19部分:沉淀石英 |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000 |
DIN EN ISO 3262-2-1998 |
涂料用填料.要求和检验方法.第2部分:重晶石(天然硫酸钡) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
DIN EN ISO 3262-2-1998 |
涂料用填料.要求和检验方法.第2部分:重晶石(天然硫酸钡) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
DIN EN ISO 3262-20-2000 |
涂料用填充剂.规范和试验方法.第20部分:烟化石英 |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000 |
DIN EN ISO 3262-21-2000 |
涂料用填充剂.规范和试验方法.第21部分:石英砂(地下天然石英) |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000 |
DIN EN ISO 3262-22-2002 |
涂料用填充剂.规范和试验方法.第22部分:热碱处理的硅藻土 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined Kieselguhr (ISO 3262:2001); German version EN ISO 3262-22:2001 |
DIN EN ISO 3262-4-1998 |
涂料用填料.要求和检验方法.第4部分:粉化 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998); German version EN ISO 3262-4:1998 |
DIN EN ISO 3262-5-1998 |
涂料用填料.要求和检验方法.第5部分:天然结晶碳酸钙 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998); German version EN ISO 3262-5:1998 |
DIN EN ISO 3262-6-1998 |
涂料用填料.要求和检验方法.第6部分:沉淀的碳酸钙 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998); German version EN ISO 3262-6:1998 |
DIN EN ISO 3262-7-1998 |
涂料用填料.要求和检验方法.第7部分:白云石 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998); German version EN ISO 3262-7:1998 |
DIN EN ISO 3262-8-1999 |
涂料用填充剂.试验方法规范.第8部分:天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999); German version EN ISO 3262-8:1999 |
DIN EN ISO 3262-9-1998 |
涂料用填充料.要求和检验方法.第9部分:煅烧的高岭土 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997); German version EN ISO 3262-9:1998 |
DIN EN ISO 3269-2000 |
紧固件.验收检查 |
Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000 |
DIN EN ISO 3274-1998 |
几何产品规范(GPS).织物表面:轮廓法.接触尖笔式记录仪的一般特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997 |
DIN EN ISO 3325-2002 |
包括硬性金属的烧结金属材料.测定横向断裂强度 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002 |
DIN EN ISO 3336-1996 |
牙科学.合成聚合物牙齿 |
Dentistry - Synthetic polymer teeth (ISO 3336:1993); German version EN ISO 3336:1996 |
DIN EN ISO 3344-1997 |
增强制品.水份含量的测定 |
Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997 |
DIN EN ISO 3381-2005 |
铁路设施.声学.有轨车辆内的噪声测量 |
|
DIN EN ISO 3382-2000 |
声学.参考其它声学参数的房间混响时间的测量 |
Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997); German version EN ISO 3382:2000 |
DIN EN ISO 3385-1995 |
软质泡沫聚合材料.用定载冲击法测定疲劳 |
Flexible cellular polymeric materials - Determination of fatigue by constant load pounding (ISO 3385:1989); German version EN ISO 3385:1995 |
DIN EN ISO 3386-1-1998 |
泡沫柔性聚合材料.压缩应力应变特性的测定.第1部分:低密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986); German version EN ISO 3386-1:1997 |
DIN EN ISO 3386-2-1998 |
泡沫柔性聚合材料.压缩应力应变特性的测定.第2部分:高密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997); German version EN ISO 3386-2:1997 |
DIN EN ISO 3405-2001 |
石油产品.在大气压下测定蒸馏特性 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000); German version EN ISO 3405:2000 |
DIN EN ISO 3411-1999 |
土方机械.操作者的人体尺寸和操作者最小座舱空间 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995); German version EN ISO 3411:1999 |
DIN EN ISO 3450-1996 |
土方机械.装橡胶轮胎机械的制动装置.系统,要求和检验 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996); German version EN ISO 3450:1996 |
DIN EN ISO 3451-1-1997 |
塑料.灰份的测定.第1部分:一般方法 |
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:1997); German version EN ISO 3451-1:1997 |
DIN EN ISO 3451-4-2001 |
塑料.灰分的测定.第4部分:聚酰胺 |
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998); German version EN ISO 3451-4:2000 |
DIN EN ISO 3451-5-2002 |
塑料.灰分的测定.第5部分:聚氯乙烯 |
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002); German version EN ISO 3451-5:2002 |
DIN EN ISO 3452-2-2000 |
无损试验.渗透试验.第2部分:渗透材料试验 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000); German version EN ISO 3452-2:2000 |
DIN EN ISO 3452-3-1999 |
无损检验.渗透检验.第3部分:标准试样 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998); German version EN ISO 3452-3:1998 |
DIN EN ISO 3452-4-1999 |
无损检验.渗透检验.第4部分:设备 |
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998); German version EN ISO 3452-4:1998 |
DIN EN ISO 3457-1995 |
土方机械.挡板和护罩.定义和规范 |
Earth moving machinery - Guards and shields - Definitions and specifications (ISO 3457:1986); German version EN ISO 3457:1995 |
DIN EN ISO 3497-2001 |
金属镀层.镀层厚度的测量.X射线光谱测定法 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000 |
DIN EN ISO 3506-1-1998 |
不锈钢制连接件的机械性能.第1部分:螺丝 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 |
DIN EN ISO 3506-2-1998 |
耐腐蚀不锈钢紧固件的机械特性.第2部分:螺母 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997 |
DIN EN ISO 3506-3-1998 |
耐腐蚀不锈钢紧固件的机械特性.第3部分:螺销和类似的无拉应力的螺丝 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997 |
DIN EN ISO 3521-1999 |
塑料.不饱和聚酯和环氧树脂.体积的总收缩量的测定 |
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999 |
DIN EN ISO 3543-2001 |
金属和非金属涂层.厚度测量.β射线反向散射法 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000 |
DIN EN ISO 3549-2002 |
色漆用锌粉颜料.规范和试验方法 |
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995); German version EN ISO 3549:2002 |
DIN EN ISO 3582-2001 |
柔性多孔聚合材料.在小火焰条件下小试样水平方向燃烧特性的实验室评定 |
Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000); German version EN ISO 3582:2000 |
DIN EN ISO 3593-1994 |
淀粉.灰分的测定 |
Starch - Determination of ash (ISO 3593:1981); German version EN ISO 3593:1994 |
DIN EN ISO 3596-2002 |
动植物脂肪和油.不可皂化物的测定.二已醚萃取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000); German version EN ISO 3596:2001 |
DIN EN ISO 3613-2002 |
锌、镉、铝锌合金和锌铝合金的铬酸盐转化镀层.试验方法 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000); German version EN ISO 3613:2001 |
DIN EN ISO 3630-1-1994 |
牙根管器械.第1部分:锉刀、扩孔器、毛刺钻孔器、粗锉、软膏、探测器和棉条钻孔器 |
Dental root-canal instruments - Part 1: Files, reamers, barbed broaches, rasps, paste carries, explorers and cotton broaches (ISO 3630-1:1992); German version EN ISO 3630-1:1994 |
DIN EN ISO 3630-2-2001 |
牙根管器械.第2部分:扩管器 |
Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000); German version EN ISO 3630-2:2000 |
DIN EN ISO 3630-3-1996 |
牙根管器械.第3部分:充盈冷凝器,充盈充填器和充盈分配器 |
Dental root-canal instruments - Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994); German version EN ISO 3630-3:1996 |
DIN EN ISO 3650-1999 |
几何产品规范(GPS).长度标准.块规 |
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 |