标准号 |
中文名称 |
英文名称 |
ISO 22643-2003 |
航天数据和信息传送系统.数据实体字典规范语言(DEDSL).XML/DTD语句 |
(Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - XML/DTD Syntax) |
ISO 22643-2003 |
航天数据和信息传送系统.数据实体字典规范语言(DEDSL).XML/DTD语句 |
|
ISO 22649-2003 |
鞋靴.内垫和内底的试验方法.吸水率和减湿率 |
(Footwear - Test methods for insoles and insocks - Water absorption and desorption) |
ISO 22649-2003 |
鞋靴.内垫和内底的试验方法.吸水率和减湿率 |
|
ISO 22650-2002 |
鞋类.整鞋的试验方法.鞋跟附件 |
Footwear - Test methods for whole shoe - Heel attachment |
ISO 22651-2002 |
鞋类.鞋内底试验方法.尺寸稳定性 |
Footwear - Test methods for insoles - Dimensional stability |
ISO 22652-2002 |
鞋类.内底、鞋衬和内垫的试验方法.耐汗性 |
Footwear - Test methods for insoles, lining and insocks - Perspiration resistance |
ISO 22653-2003 |
鞋靴.鞋衬和内垫的试验方法.静摩擦 |
(Footwear - Test methods for lining and insocks - Static friction ) |
ISO 22653-2003 |
鞋靴.鞋衬和内垫的试验方法.静摩擦 |
|
ISO 22654-2002 |
鞋类.外底的试验方法.抗拉强度和伸长率 |
Footwear - Test methods for outsoles - Tensile strength and elongation |
ISO 22669-2003 |
空间数据和信息传输系统.空间链路扩展(SLE).全部回程帧(Return-all-frames)服务 |
|
ISO 2267-1986 |
表面活性剂.洗涤效果的评价.洁净的对照棉的织品的制备和使用方法 |
Surface active agents; Evaluation of certain effects of laundering; Methods of preparation and use of unsoiled cotton control cloth |
ISO 2268-1972 |
非离子表面活性剂.聚乙二醇和非离子活性物质(加合物)的测定.韦布尔(Weibull) |
Surface active agents (non-ionic); Determination of polyethylene glycols and non-ionic active matter (adducts); Weibull method |
ISO 2269-1992 |
造船.A级磁罗经.方位角读数装置和罗盘座.试验和鉴定 |
Shipbuilding; class A magnetic compasses, azimuth reading devices and binnacles; tests and certification |
ISO 227-1978 |
纺织机械和附件.自动织机中央尖梭用单箱皮结和有关的投梭棒的尺寸 |
Textile machinery and accessories; Single box pickers for centre tip shuttles for automatic looms and related picking stick dimensions |
ISO 2270-1989 |
非离子表面活性剂.聚乙氧基衍生物.氧化乙烯基的碘量的测定 |
Non-ionic surface active agents; polyethoxylated derivatives; iodometric determination of oxyethylene groups |
ISO 22702-2003 |
通用打火机.一般消费者安全要求 |
(Utility lighters - General consumer-safety requirements) |
ISO 22702-2003 |
通用打火机.一般消费者安全要求 |
|
ISO 22702-2003 |
通用打火机.一般消费者安全要求 |
|
ISO 2271-1989 |
表面活性剂.洗涤剂.用人工或机械动力直接双相滴定法测定阴离子活性物质 |
Surface active agents; detergents; determination of anionic-active matter by manual or mechanical direct two-phase titration procedure |
ISO 2272-1989 |
表面活性剂.肥皂.用分子吸收光谱测定法对低浓度游离甘油的测定 |
Surface active agents; soaps; determination of low contents of free glycerol by molecular absorption spectrometry |
ISO 2277-1973 |
飞机的静态变流器 |
Static invertors for aircraft |
ISO 22774-2004 |
鞋靴.鞋附件的试验方法:鞋带.耐磨性 |
|
ISO 228-1-2000 |
非螺纹密封连接的管螺纹.第1部分:尺寸、公差和名称与符号 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation |
ISO 228-2-1987 |
非螺纹密封连接的管螺纹.第2部分:极限量规检验 |
Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit gauges |
ISO 22803-2004 |
牙科学.口腔及颌面外科中受控制的组织再生用薄膜材料.技术文档的内容 |
|
ISO 22803-2004 |
牙科学.口腔及颌面外科中受控制的组织再生用薄膜材料.技术文档的内容 |
|
ISO 2281-1990 |
计时仪器.防水表 |
Horology; water-resistant watches |
ISO 2283-2000 |
标称直径3-24M和1/8-1 英寸的长柄丝锥.缩柄丝锥 |
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps |
ISO 2284-1987 |
直管和锥管螺纹的手用丝锥.一般尺寸和标记 |
Hand taps for parallel and taper pipe threads; General dimensions and marking |
ISO 22846-1-2003 |
个人防跌落保护性设备.绳索接近系统.第1部分:工作系统的基本原理 |
(Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work) |
ISO 22846-1-2003 |
个人防跌落保护性设备.绳索接近系统.第1部分:工作系统的基本原理 |
|
ISO 2285-2001 |
硫化橡胶或热塑橡胶.在连续拉伸下拉伸永久变形和连续拉伸荷载下拉伸永久变形和蠕变的测定 |
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
ISO 22857-2004 |
健康信息学.数据保护以利于个人健康信息的国际间流动用指南 |
|
ISO 2286-1-1998 |
橡胶或塑料涂覆织物.卷料参数的测定.第1部分:长度、宽度和湿重的测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of the length, width and net mass |
ISO 2286-2-1998 |
橡胶或塑料涂覆织物.卷料参数的测定.第2部分:涂料每单位面积总质量、质量和衬底每单位面积质量的测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate |
ISO 2286-3-1998 |
橡胶或塑料涂覆织物.卷绕特性的测定.第3部分:厚度的测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness |
ISO 22877-2004 |
脚轮和轮子.词汇、符号和多语种术语 |
|
ISO 22878-2004 |
脚轮和轮子.试验方法和装置 |
|
ISO 22879-2004 |
脚轮和轮子.家具用脚轮的要求 |
|
ISO 22880-2004 |
脚轮和轮子.转椅用脚轮的要求 |
|
ISO 22881-2004 |
脚轮和轮子.公共机构用的手推设备的使用要求 |
|
ISO 22882-2004 |
脚轮和轮子.医院床用脚轮的要求 |
|
ISO 22883-2004 |
脚轮和轮子.1.1 m/s (4 km/h)及以下的应用要求 |
|
ISO 22884-2004 |
脚轮和轮子.1.1m/s(4 km/h)以上和最高至4.4m/s(16 km/h)的应用要求 |
|
ISO 2289-1972 |
旋转钻井设备.方钻杆 |
Rotary drilling equipment; Kellys |
ISO 22897-2003 |
建筑物用玻璃.玻璃和空气噪声隔绝.产品描述和性能测定 |
(Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties) |
ISO 22897-2003 |
建筑物用玻璃.玻璃和空气噪声隔绝.产品描述和性能测定 |
|
ISO 229-1973 |
机床.速度和进刀 |
Machine tools; Speeds and feeds |
ISO 2290-1972 |
旋转钻井设备.方钻杆上旋阀和下旋阀 |
Rotary drilling equipment; Upper and lower Kelly cocks |
ISO 2291-1980 |
可可豆.水含量的测定(常规法) |
Cocoa beans; Determination of moisture content (Routine method) |
ISO 22917-2004 |
超磨料.金刚石或立方体氮化硼砂轮的极限偏差和跳动误差 |
|
ISO 2292-1973 |
可可豆.取样 |
Cocoa beans; Sampling |
ISO 2294-1974 |
肉和肉制品.磷总含量的测定(参照法) |
Meat and meat products; Determination of total phosphorus content (Reference method) |
ISO 2295-1974 |
鳄梨.贮存和运输指南 |
Avocados; Guide for storage and transport |
ISO 2296-1972 |
细齿和粗齿金属切割锯.米制系列 |
Metal slitting saws with fine and coarse teeth; Metric series |
ISO 2297-1973 |
铝及铝合金的化学分析.镁的络合滴定法测定 |
Chemical analysis of aluminium and its alloys; Complexometric determination of magnesium |
ISO 22972-2004 |
香精油.手性毛细管柱气相色谱法分析.一般方法 |
|
ISO 2299-1973 |
阔叶树类锯材.缺陷.分类.三种语言版 |
Sawn timber of broadleaved species; Defects; Classification Trilingual edition |
ISO 22991-2004 |
储气瓶.液化石油气用可运输的可再填充焊接钢瓶.设计和建造 |
|
ISO 23-1993 |
电影技术.35mm电影胶片的摄影机用法.规范 |
Cinematography; camera usage of 35 mm motion-picture film; specifications |
ISO 230-1-1996 |
机床验收规则.第1部分:在空载或精加工状态下工作的机床几何精度 |
Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or finishing conditions |
ISO 230-2 Technical Corrigendum 1-1999 |
机床的试验规程.第2部分:定位数字化控制轴精密度和可重复性的测定.技术勘误1 |
Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes; Technical Corrigendum 1 |
ISO 230-2-1997 |
机床测验规则.第2部分:定位用数字控制轴的精度和重复性的测定 |
Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes |
ISO 230-3-2001 |
机床试验规程.第3部分:热效应的测定 |
Test code for machine tools - Part 3: Determination of thermal effects |
ISO 230-4-1996 |
机床试验规程.第4部分:数控机床的循环测试 |
Test code for machine tools - Part 4: Circular tests for numerically controlled machine tools |
ISO 230-5-2000 |
机床试验规则.第5部分:噪声排放的测定 |
Test code for machine tools - Part 5: Determination of the noise emisssion |
ISO 230-6-2002 |
机床检验通则.第6部分:体和面对角线的位置和精度的测定(对角线位移试验) |
Test code for machine tools - Part 6: Determinaton of positioning, accuracy on body and face diagonals (Diagonal displacement tests) |
ISO 2300-1973 |
阔叶树类锯材.缺陷.术语和定义.三种语言版 |
Sawn timber of broadleaved species; Defects; Terms and definitions Trilingual edition |
ISO 2301-1973 |
阔叶树类锯材.缺陷.测量.三种语言版 |
Sawn timber of broadleaved species; Defects; Measurement Trilingual edition |
ISO 2302-1995 |
异丁稀-异戊二烯橡胶(IR).评定程序 |
Isobutene-isoprene rubber (IIR) - Evaluation procedures |
ISO 2303-2003 |
异戊橡胶(IR).非充油,溶液聚合型橡胶.评定规程 |
Isoprene rubber (IR) - Non-oil-extended, solution-polymerized types - Evaluation procedure |
ISO 2303-2003 |
异戊橡胶(IR).非充油,溶液聚合型橡胶.评定规程 |
|
ISO 2306-1972 |
自攻螺纹底径钻头 |
Drills for use prior to tapping screw threads |
ISO 2307-1990 |
绳索.有关物理和力学的性能的测定 |
Ropes; determination of certain physical and mechanical properties |
ISO 2308-1972 |
30吨以下的提升货运集装箱的吊钩.基本要求 |
Hooks for lifting freight containers of up to 30 tonnes capacity; Basic requirements |
ISO 2312-1972 |
工业用四氯化碳.试验方法 |
Carbon tetrachloride for industrial use; Methods of test |
ISO 2313-1972 |
纺织品.用测量织物样品的折皱回复角的方法测定纬向折皱叠的折皱回复度 |
Textiles; Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery |
ISO 2314 AMD 1-1997 |
燃气轮机.验收试验.补充件1:混合循环电厂的验收试验 |
Gas turbines - Acceptance tests; Amendment 1: Acceptance test for combined-cycle power plants |
ISO 2314 Technical Corrigendum 1-1997 |
燃气轮机.验收试验.技术勘误表1 |
Gas turbines - Acceptance tests; Technical Corrigendum 1 |
ISO 2314-1989 |
燃气轮机.验收试验 |
Gas turbines; acceptance tests |
ISO 2315-1980 |
飞机.2A和3A型双极和四极密封电磁继电器.间隙和固定尺寸 |
Aircraft; Two- and four-pole sealed electromagnetic relays, 2 A and 3 A; Clearance and fixing dimensions |
ISO 2320-1997 |
长效扭矩式钢质六角螺母.机械和性能参数 |
Prevailing torque type steel hexagon nuts - Mechanical and performance properties |
ISO 2321-1983 |
橡胶螺纹.试验方法 |
Rubber threads; Methods of test |
ISO 2322-1996 |
苯乙烯-丁二烯(SBR)橡胶.乳化和溶解聚合型橡胶的评定方法 |
Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures |
ISO 2325-1986 |
焦炭.粒度分析(标称最大粒径为20mm或小于20mm) |
Coke; Size analysis (Nominal top size 20 mm or less) |
ISO 2326-1972 |
松散物料的连续机械装卸设备.风送滑槽 |
Continuous mechanical handling equipment for loose bulk materials; Aeroslides |
ISO 2327-1972 |
松散物料的风动装卸设备.导管 |
Pneumatic handling appliances for loose bulk materials; Piping |
ISO 2328-1993 |
叉车.钩接式叉臂和叉臂托架.安装尺寸 |
Fork-lift trucks; hook-on type fork arms and fork arm carriages; mounting dimensions |
ISO 2328-1993 |
叉车.钩接式叉臂和叉臂托架.安装尺寸 |
Fork-lift trucks; hook-on type fork arms and fork arm carriages; mounting dimensions |
ISO 233-1984 |
文献工作.从阿拉伯字母到拉丁字母的译音 |
Documentation; Transliteration of Arabic characters into Latin characters |
ISO 233-2-1993 |
情报和文献.从阿拉伯字母到拉丁字母的译音.第2部分:阿拉伯语言 |
Information and documentation; transliteration of Arabic characters into Latin characters; part 2: Arabic language; simplified transliteration |
ISO 233-3-1999 |
情报和文献.从阿拉伯字母到拉丁字母的译音.第3部分:波斯语.简化译音 |
Information and documentation - Transliteration of Arabic characters into Latin characters - Part 3: Persian language - Simplified transliteration |
ISO 2330-2002 |
叉式起重车.叉臂.技术特性和试验 |
Fork-lift trucks - Fork arms - Technical characteristics and testing |
ISO 2331-1974 |
叉式起重车.钩接式叉臂.词汇.三种语言版 |
Fork lift trucks; Hook-on type fork arms; Vocabulary Trilingual edition |
ISO 2332-1993 |
农业拖拉机和机械.三点联接的机具连接.机具周围安全区 |
Agricultural tractors and machinery; connection of implements via three-point linkage; clearance zone around implement |
ISO 23328-1-2003 |
麻醉和呼吸用呼吸系统过滤器.第1分:评定过滤特性的盐试验方法 |
(Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance) |
ISO 23328-1-2003 |
麻醉和呼吸用呼吸系统过滤器.第1分:评定过滤特性的盐试验方法 |
|
ISO 23328-2-2002 |
麻醉和呼吸用呼吸系统过滤器.第2部分:非过滤特性 |
Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects |
ISO 2336-1-1996 |
弓形锯条.第1部分:手锯条的尺寸 |
Hacksaws blades - Part 1: Dimensions for hand blades |
ISO 2336-2-1996 |
弓形锯条.第1部分:机锯条的尺寸 |
Hacksaws blades - Part 2: Dimensions for machine blades |
ISO 2338-1997 |
未淬硬钢和不锈钢制的圆柱销 |
Parallel pins, of unhardened steel and austenitic stainless steel |
ISO 2339-1986 |
未淬硬的锥销 |
Taper pins, unhardened |
ISO 234-1-1983 |
钢锉和木锉.第1部分:尺寸 |
Files and rasps; Part 1 : Dimensions |
ISO 234-2-1982 |
钢锉和木锉.第2部分:锉削特征 |
Files and rasps - Part 2: Characteristics of cut |
ISO 2340-1986 |
无头U形夹销 |
Clevis pins without head |
ISO 2341-1986 |
有头U形夹销 |
Clevis pins with head |
ISO 2342-1972 |
一字槽无头螺钉.米制系列 |
Slotted headless screws; Metric series |
ISO 2342-2003 |
有柄开槽无头螺钉 |
|
ISO 23429-2004 |
六角内孔的测量 |
|
ISO 2344-1998 |
道路车辆.锥形底座和汽缸盖上座孔的M14×1.25火花塞 |
Road vehicles - M14 ?1,25 spark-plugs with conical seating and their cylinder head housings |
ISO 2345-1994 |
道路车辆.有锥形底座的M18×1.5火花塞和汽缸盖体 |
Road vehicles - M18?,5 spark-plugs with conical seating and their cylinder head housing |
ISO 2346-2001 |
道路车辆.带平底座的19mm六角形的M14×1.25小型火花塞及其汽缸盖座孔 |
Road vehicles - M14 ?1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
ISO 2347-1994 |
道路车辆.有锥形底座的M14×1.25火花塞和汽缸盖体 |
Road vehicles - M14?,25 compact spark-plugs with conical seating and their cylinder head housing |
ISO 235 Technical Corrigendum 1-1996 |
直柄机用短型系列钻头和莫氏锥柄钻头.技术勘误1 |
Parallel shank jobber and stub series drills and Morse taper shank drills; Technical corrigendum 1 |
ISO 235-1980 |
直柄机用短型系列钻头和莫氏锥柄钻头 |
(Parallel shank jobber and stub series drills and Morse taper shank drills) |
ISO 2351-1-2002 |
螺钉和螺母用装配工具.机动旋具头.第1部分:一字槽螺钉旋具头 |
Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws |
ISO 2351-2-2002 |
螺钉和螺母用装配工具.机动旋具头.第2部分:十字凹头螺钉用旋具头 |
Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws |
ISO 2351-3-2002 |
螺钉和螺母用装配工具.机动旋具头.第3部分:六角凹头螺钉用旋具头 |
(Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws) |
ISO 2352-2000 |
螺钉和螺母用装配工具.螺旋棘齿的旋具头.尺寸 |
(Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions) |