标准号 |
中文名称 |
英文名称 |
| ISO 8254-2-2003 |
纸和纸板.光泽度的测量.第2部分:用平行光束的75度,DIN法 |
|
| ISO 8254-3-2004 |
纸和纸板.光泽度的测量.第3部分:用会聚光束的20?光泽度的TAPPI法 |
|
| ISO 8255-1-1986 |
光学和光学仪器.显微镜.玻璃盖片.第1部分:尺寸公差、厚度和光学性能 |
Optics and optical instruments; Microscopes; Cover glasses; Part 1 : Dimensional tolerances, thickness and optical properties |
| ISO 8255-2-1997 |
光学和光学仪器.显微镜.玻璃盖片.第2部分:材料质量、完成标准和包装模式 |
Optics and optical instruments - Microscopes - Cover glasses - Part 2: Quality of materials, standards of finish and mode of packaging |
| ISO 8256 Technical Corrigendum 1-1991 |
塑料.拉伸冲击强度测定.技术勘误1 |
Plastics; determination of tensile-impact strength; technical corrigendum 1 |
| ISO 8256-1990 |
塑料.拉伸冲击强度测定 |
Plastics; determination of tensile-impact strength |
| ISO 8256-2004 |
塑料.拉伸冲击强度测定 |
|
| ISO 8256-2004 |
塑料.拉伸冲击强度测定 |
|
| ISO 8257-1-1998 |
塑料.聚异丁烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体制和基本规范 |
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 8257-2-2001 |
塑料.聚甲基丙烯酸甲酯(PMMA)模制和挤压材料.第2部分:试样制备性能测定 |
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 8258 Technical Corrigendum 1-1993 |
Shecohart控制图.技术勘误1 |
Shewhart control charts; technical corrigendum 1 |
| ISO 8258-1991 |
西瓦特控制图 |
Shewhart control charts |
| ISO 8261-2001 |
牛奶和奶制品.微生物检测用的试验样品、初始悬浮物和十倍稀释物的制备 |
Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination |
| ISO 8262-1-1987 |
乳制品和以奶为基料的食品.用韦布尔-伯恩特罗普重量分析法测定脂肪含量(参考法).第1部分:婴儿食品 |
Milk products and milk-based foods; Determination of fat content by the Weibull- Berntrop gravimetric method (Reference method); Part 1 : Infant foods |
| ISO 8262-2-1987 |
乳制品和以奶为基料的食品.用韦布尔-伯恩特罗普重量分析法(参照法)测定脂肪含量.第2部分:食用冰制品和冰配制食品 |
Milk products and milk-based foods; Determination of fat content by the Weibull- Berntrop gravimetric method (Reference method); Part 2 : Edible ices and ice-mixes |
| ISO 8262-3-1987 |
乳制品和以奶为基料的食品.用韦布尔-伯恩特罗普重重分析法(参照法)测定脂肪含量.第3部分:特殊情况 |
Milk products and milk-based foods; Determination of fat content by the Weibull- Berntrop gravimetric method (Reference method); Part 3 : Special cases |
| ISO 8263-1992 |
铁矿石粉.烧结试验结果的表示方法 |
Iron ore fines; method for presentation of the results of sintering tests |
| ISO 8264-1989 |
硬煤.利用膨胀计测定其膨胀性 |
Hard coal; determination of the swelling properties using a dilatometer |
| ISO 8265-1988 |
水质.为浅淡水中多石底层上的水底大无脊椎动物而设计和使用定量取样器 |
Water quality; design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters |
| ISO 8267-1997 |
飞机.倾斜质量最大为50000kg(110000 1b)的运输飞机牵引杆附属装置配件.接口要求 |
Aircraft - Tow bar attachment fittings for transport aircraft with a maximum ramp mass over 50000 kg (110000 lb) - Interface requirements |
| ISO 8268-1987 |
空中货运设备.自动运输装置.基本要求 |
Air cargo equipment; Automobile transport devices; Basic requirements |
| ISO 8269-1985 |
门具.静态载荷试验 |
Doorsets; Static loading test |
| ISO 8270-1985 |
门具.软型重物撞击试验 |
Doorsets; Soft heavy body impact test |
| ISO 8271-1985 |
门扇.硬物撞击试验 |
Door leaves; Hard body impact test |
| ISO 8272-1985 |
门户装置.透气性试验 |
Doorsets; Air permeability test |
| ISO 8273-1985 |
门和门组件.由于在不同气候下的门和门户装置性能试验用的标准大气压 |
Doors and doorsets; Standard atmospheres for testing the performance of doors and doorsets placed between different climates |
| ISO 8274-1985 |
门具.闭合力的测定 |
Doorsets; Determination of closing force |
| ISO 8275-1985 |
门具.垂直载荷试验 |
Doorsets; Vertical load test |
| ISO 8277-1988 |
船舶制造.管道工程.信息传输 |
Shipbuilding; pipework; information transfer |
| ISO 8278-1986 |
航空航天.液压式压力补偿变量泵.一般要求 |
Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements |
| ISO 8279-1997 |
航空航天.六角开槽(槽顶),标定高度,标定交叉平面,带MJ 螺纹的螺母.强度类别600MPa,最高工作温度 120℃;600MPa,最高工作温度 235℃;900MPa,最高工作温度 425℃;1100MPa,最高工作温度 235℃;1100MPa,最高工作温度 315℃;1100MPa,最高工作温度 650℃;1210MPa,最高工作温度 730℃; |
Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 C, 600 MPa (at ambient temperature)/235 C, 900 MPa (at ambient temperature)/425 C, 1100 MPa (at ambient temperat |
| ISO 8280-1993 |
航空航天.有万能工作台,由金属材料制成,经过或没有经过表面处理,实心铆钉尺寸 |
Aerospace; rivets, solid, universal head, metallic material, with or without surface treatment; dimensions |
| ISO 8282-1994 |
牙科设备.汞和合金混合器与分配器 |
Dental equipment - Mercury and alloy mixers and dispensers |
| ISO 8283-1-1991 |
塑料管和配件.建筑物内排放装置用管材插口和管材套筒尺寸.第1部分:未增塑聚氯乙烯和氯化聚氯乙烯 |
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1: unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) |
| ISO 8283-2-1992 |
塑料管和配件.建筑物内排放装置用套管和管套尺寸.第2部分:聚乙烯(PE) |
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2: polyethylene (PE) |
| ISO 8283-3-1992 |
塑料管和配件.建筑物内排放装置用套管和管套尺寸.第3部分:聚丙烯(PP) |
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3: polypropylene (PP) |
| ISO 8283-4-1992 |
塑料管和配件.建筑物内排放装置用套管和管套尺寸.第4部分:丙烯腈/丁二烯/苯乙烯(ABS) |
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 4: acrylonitrile/butadiene/styrene (ABS) |
| ISO 8287-2000 |
镁和镁合金.非合金镁.化学成分 |
Magnesium and magnesium alloys - Unalloyed magnesium - Chemical composition |
| ISO 8288-1986 |
水质.钴、镍、铜、锌、镉和铅的测定.火焰原子吸收光谱测定法 |
Water quality; Determination of cobalt, nickel, copper, zinc, cadmium and lead; Flame atomic absorption spectrometric methods |
| ISO 8289-2000 |
釉瓷和搪瓷.检测和确定缺陷位置的低电压试验 |
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects |
| ISO 8290-1998 |
釉瓷和搪瓷.室温下抗硫酸的测定 |
Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature |
| ISO 8292-1991 |
动植物脂肪和油.固态脂肪含量的测定.脉冲核磁共振法 |
Animal and vegetable fats and oils; determination of solid fat content; pulsed nuclear magnetic resonance method |
| ISO 8294-1994 |
动植物脂肪和动植物油.铜,铁和镍含量的测定.石墨熔炉原子吸收测定法 |
Animal and vegetable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method |
| ISO 8295-1995 |
塑料.薄膜和薄板.摩擦系数的测定 |
Plastics - Film and sheeting - Determination of the coefficients of friction |
| ISO 8296 Technical Corrigendum 1-1998 |
塑料.薄膜和薄板.湿润表面张力的测定.技术勘误1 |
Plastics - Film and sheeting - Determination of wetting tension; Technical Corrigendum 1 |
| ISO 8296-1987 |
塑料.薄膜和薄板.湿润表面张力的测定 |
Plastics; Film and sheeting; Determination of wetting tension |
| ISO 8296-2003 |
塑料.薄膜和薄板.湿润表面张力的测定 |
(Plastics - Film and sheeting - Determination of wetting tension) |
| ISO 8296-2003 |
塑料.薄膜和薄板.湿润表面张力的测定 |
|
| ISO 8297-1994 |
声学.声压级环境评定用多性能光源厂声功率级的测定 |
Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method |
| ISO 8298-2000 |
核燃料技术.硝酸溶液中钚毫克数的测定.用铈氧化和铁还原后的重铬酸钾的电位测量滴定法 |
Nuclear fuel technology - Determination of milligram amounts of plutonium in nitric acid solutions - Potentiometric titration with potassium dichromate after oxidation by CE(IV) and reduction by FE(II) |
| ISO 8299-1993 |
硝酸溶液中铀和环浓缩物和同位素含量的测定 |
Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method |
| ISO 83-1976 |
钢.摆锤冲击试验(U形切口) |
Steel; Charpy impact test (U-notch) |
| ISO 830 Technical Corrigendum 1-2001 |
运货容器,词汇,技术勘误1 |
Freight containers - Vocabulary; Technical corrigendum 1 |
| ISO 830-1999 |
货运集装箱.词汇 |
Freight containers - Vocabulary |
| ISO 8300-1987 |
核品位质量的二氧化钚(PuO2)中钚含量的测定.重量法 |
Determination of plutonium content in plutonium dioxide (PuO2) of nuclear grade quality; Gravimetric method |
| ISO 8301-1991 |
热绝缘.固态热阻和相关特性的测定.热流动测量仪表 |
Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus |
| ISO 8302-1991 |
热绝缘.稳态热阻和相关特性的测定.隔热板式仪表 |
Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus |
| ISO 8303-1985 |
造船.船载驳船,系列3.主要操作和技术要求 |
Shipbuilding; Shipborne barges, series 3; Main operational and technical requirements |
| ISO 8304-1984 |
造船.船载驳船,系列3.通风系统.主要配合尺寸 |
Shipbuilding; Shipborne barges, series 3; Ventilation system; Principal mating dimensions |
| ISO 8306-1985 |
起重机.桥式起重机和门式起重机.起重机和导轨的公差 |
Cranes; Overhead travelling cranes and portal bridge cranes; Tolerances for cranes and tracks |
| ISO 8307-1990 |
软泡沫塑料聚合材料.回强性测定 |
Flexible cellular polymeric materials; determination of resilience |
| ISO 8308-1993 |
橡胶和塑料软管和管系.软管和管壁的透液量的测定 |
Rubber and plastics hoses and tubing; determination of transmission of liquids through hose and tubing walls |
| ISO 8309-1991 |
轻质碳氢化合物制冷液.含液化气容器中液位的测量.电容计 |
Refrigerated light hydrocarbon fluids; measurement of liquid levels in tanks containing liquefied gases; electrical capacitance gauges |
| ISO 8310-1991 |
轻质碳氢化合物制冷液.罐中液化气温度测量.热电偶温度计 |
Refrigerated light hydrocarbon fluids; measurement of temperature in tanks containing liquefied gases; resistance thermometers and thermocouples |
| ISO 8311-1989 |
轻质碳氢化合物制冷液.船上薄膜式罐和柱型罐的标定.物理测量法 |
Refrigerated light hydrocarbon fluids; calibration of membrane tanks and indepedent prismatic tanks in ships; physical measurement |
| ISO 8312-1999 |
橡胶配料成份.硬脂酸.定义和试验方法 |
Rubber compounding ingredients - Stearic acid - Definition and test methods |
| ISO 8313-1989 |
土方机械.装载机.机具过加载和倾翻载荷测量方法 |
Earth-moving machinery; loaders; methods of measuring tool forces and tipping loads |
| ISO 8314-1987 |
造船和海上建筑物.跨架轴承和导向滑块轴承的枢轴配件 |
Shipbuilding and marine structures; Trunnion pieces for span bearings and lead block bearings |
| ISO 8316-1987 |
封闭管道内液体流量的测量.容积测量箱的液体收集法 |
Measurement of liquid flow in closed conduits; Method by collection of the liquid in a volumetric tank |
| ISO 8317-1989 |
防小孩拆开的包装.可再次包装的要求和试验方法 |
Child-resistant packaging; requirements and testing procedures for reclosable packages |
| ISO 8317-2003 |
防儿童拆开的包装.可再次包装的要求和试验程序 |
(Child-resistant packaging - Requirements and testing procedures for reclosable packages) |
| ISO 8317-2003 |
防儿童拆开的包装.可再次包装的要求和试验程序 |
|
| ISO 8318-2000 |
包装.满装的运输包装和单货物.采用可变频的正弦振动试验 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency |
| ISO 8319-1-1996 |
矫形外科器械.扳动连接件.第1部分:内六角插头的螺钉扳手 |
Orthopaedic instruments - Drive connections - Part 1: Keys for use with screws with hexagon socket heads |
| ISO 8319-2-1986 |
矫形外科器械.扳动连接件.第2部分:一字槽头螺钉、十字槽螺钉和十字槽头螺钉的旋具 |
Orthopaedic instruments; Drive connections; Part 2 : Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws |
| ISO 832-1994 |
信息和文献.描述和参考书目.文献索引术语的缩写规则 |
Information and documentation - Bibliographic description and references - Rules for the abbreviation of bibliographic terms |
| ISO 8320-1-2003 |
隐形眼镜和隐形眼镜护理品.词汇.第1部分:隐形眼镜 |
(Contact lenses and contact lens care products - Vocabulary - Part 1: Contact lenses) |
| ISO 8320-1-2003 |
隐形眼镜和隐形眼镜护理品.词汇.第1部分:隐形眼镜 |
|
| ISO 8320-1986 |
光学和光学仪器.贴眼透镜.词汇和符号.两种语言版 |
Optics and optical instruments; Contact lenses; Vocabulary and symbols Bilingual edition |
| ISO 8320-2-2001 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片护理产品 |
Contact lenses and contact lens care products - Vocabulary - Part 2: Contact lens care products |
| ISO 8321-1-2002 |
眼科光学.接触镜的材料、光学和尺寸特性规范.硬质角膜和巩膜接触镜 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 1: Rigid corneal and scleral contact lenses |
| ISO 8321-2-2000 |
眼科光学.接触镜片的材料、光学和尺寸特性规范.第2部分:单焦水晶接触镜片 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel contact lenses |
| ISO 8322-5-1991 |
建筑结构.测量仪表.使用中精度的测定规程.第5部分:光测悬线仪表 |
Building construction; measuring instruments; procedures for determining accuracy in use; part 5: optical plumbing instruments |
| ISO 8322-6-1991 |
建筑结构.测量仪表.使用中精度的测定规程.第6部分:激光仪表 |
Building construction; measuring instruments; procedures for determining accuracy in use; part 6: laser instruments |
| ISO 8323-1985 |
货运集装箱.空运/地面运输气、液集装箱(交互型)规范和试验 |
Freight containers; Air/surface (intermodal) general purpose containers; Specification and tests |
| ISO 8325-1985 |
牙科用旋转器械.试验方法 |
Dental rotary instruments; Test methods |
| ISO 8325-2004 |
牙科.旋转器械试验方法 |
|
| ISO 8330-1998 |
橡胶和塑料软管及软管组件.词汇 |
Rubber and plastics hoses and hose assemblies - Vocabulary |
| ISO 8331-1991 |
橡胶和塑料软管和软管组件.选择、贮存、使用和维护指南 |
Rubber and plastics hoses and hose assemblies; guide to the selection, storage, use and maintenance |
| ISO 8332-1997 |
橡胶配方配合剂.硫的试验方法 |
Rubber compounding ingredients - Sulfur - Methods of test |
| ISO 8333-1985 |
用溢流堰和斜槽测量明渠水流量.V形宽脊量水堰 |
Liquid flow measurement in open channels by weirs and flumes; V-shaped broad-crested weirs |
| ISO 8334-1985 |
林业机械.手提式链锯.平衡的测定 |
Forestry machinery; Portable chain-saws; Determination of balance |
| ISO 8335-1987 |
木屑水泥板.硅酸盐水泥板或等效的木屑纤维增强水泥板 |
Cement-bonded particleboards; Boards of Portland or equivalent cement reinforced with fibrous wood particles |
| ISO 8336 AMD 1-2004 |
纤维水泥平板.修改件1 |
|
| ISO 8336-1993 |
纤维水泥平板 |
Fibre-cement flat sheets |
| ISO 8339-1984 |
建筑结构.连接件.密封料抗拉性能的测定 |
Building construction; Jointing products; Sealants; Determination of tensile properties |
| ISO 834-1-1999 |
耐火试验.建筑结构件.第1部分:一般要求 |
Fire-resistance tests - Elements of building construction - Part 1: General requirements |
| ISO 834-4-2000 |
耐火试验.建筑结构件.第4部分:承重垂直独立件的特殊要求 |
Fire-resistance tests - Elements of building construction - Part 4: Specific requirements for loadbearing vertical separating elements |
| ISO 834-5-2000 |
耐火试验.建筑结构件.第5部分:承重水平独立件的特殊要求 |
Fire-resistance tests - Elements of building construction - Part 5: Specific requirements for loadbearing horizontal separating elements |
| ISO 834-6-2000 |
耐火试验.建筑结构件.第6部分:梁的特殊要求 |
Fire-resistance tests - Elements of building construction - Part 6: Specific requirements for beams |
| ISO 834-7-2000 |
耐火试验.建筑结构件.第7部分:柱的特殊要求 |
Fire-resistance tests - Elements of building construction - Part 7: Specific requirements for columns |
| ISO 834-8-2002 |
耐火试验.房屋建筑构件.第8部分:非承重垂直分离构件的特殊要求 |
Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements |
| ISO 834-9-2003 |
耐火试验.建筑构件.第9部分:非承重顶棚构件的特殊要求 |
(Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements) |
| ISO 834-9-2003 |
耐火试验.建筑构件.第9部分:非承重顶棚构件的特殊要求 |
|
| ISO 8340 Technical Corrigendum 1-1995 |
建筑结构.连接件.密封料持续延伸下的抗拉性能测定.技术勘误表1 |
Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension; Technical Corrigendum 1 |
| ISO 8340-1984 |
建筑结构.连接件.密封料.持续延伸下的抗拉性能测定 |
Building construction; Jointing products; Sealants; Determination of tensile properties at maintained extension |
| ISO 8343-1985 |
镍铁.硅含量的测定.重量分析法 |
Ferronickel; Determination of silicon content; Gravimetric method |
| ISO 8348 Technical Corrigendum 1-1991 |
信息处理系统.数据通信.网络服务定义.技术勘误表1 |
Information processing systems; data communications; network service definition; technical corrigendum 1 |
| ISO 8349-2002 |
道路车辆. 测量道路表面摩擦力 |
Road vehicles - Measurement of road surface friction |
| ISO 8349-2002 |
道路车辆. 测量道路表面摩擦力 |
Road vehicles - Measurement of road surface friction |
| ISO 835-1-1981 |
实验室玻璃器皿.刻度移液管.第1部分:一般要求 |
Laboratory glassware; Graduated pipettes; Part 1 : General requirements |
| ISO 835-2-1981 |
实验室玻璃器皿.刻度移液管.第2部分:不定时的移液管 |
Laboratory glassware; Graduated pipettes; Part 2 : Pipettes for which no waiting time is specified |
| ISO 835-3-1981 |
实验室玻璃器皿.刻度移液管.第3部分:定时15秒的移液管 |
Laboratory glassware; Graduated pipettes; Part 3 : Pipettes for which a waiting time of 15 s is specified |
| ISO 835-4-1981 |
实验室玻璃器皿.刻度吸液管.第4部分:放气管 |
Laboratory glassware; Graduated pipettes; Part 4 : Blow-out pipettes |
| ISO 8351-1-1994 |
包装.袋包装规格方法.纸袋 |
Packaging - Method of specification for sacks - Part 1: Paper sacks |
| ISO 8351-2-1994 |
包装.袋包装规格方法.第2部分:热塑软薄膜制成的包装袋 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film |
| ISO 8356-1984 |
道路车辆.柴油发动机.22型螺旋拧入式喷油嘴 |
Road vehicles; Diesel engines; Screw-in injector, type 22 |
| ISO 8358-1991 |
固体肥料.化学和物理分析用试样的制备 |
Solid fertilizers; preparation of samples for chemical and physical analysis |
| ISO 8359-1996 |
医用氧气浓缩器的安全要求 |
Oxygen concentrators for medical use - Safety requirements |
| ISO 836-2001 |
耐火材料术语 |
Terminology for refractories |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com