标准号 |
中文名称 |
英文名称 |
ISO 14508-1997 |
道路车辆.火花塞.电极 |
(Road vehicles - Spark-plugs - Terminals) |
ISO 14509 AMD 1-2004 |
小艇.动力娱乐艇发出的空气噪声的测量.修改件1 |
|
ISO 14509-2000 |
小型船舶.动力娱乐船排放的空气噪声的测定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft) |
ISO 14511-2001 |
密封导管中流体流量测量.热质量流量计 |
(Measurement of fluid flow in closed conduits - Thermal mass flowmeters) |
ISO 14512-1999 |
客用车.具有裂口摩擦系数的正向前方地面制动系统.开环试验方法 |
(Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method) |
ISO 14520-1 Technical Corrigendum 1-2002 |
气体灭火系统.物理特性和系统设计.第1部分:一般要求.技术勘误1 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements; Technical Corrigendum 1) |
ISO 14520-1-2000 |
气体灭火系统.物理特性和系统设计.第1部分:一般要求 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements) |
ISO 14520-10-2000 |
气体灭火系统.物理特性和系统设计.第10部分:HFC 23灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant) |
ISO 14520-11-2000 |
气体灭火系统.物理特性和系统设计.第11部分:HFC 236fa灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant) |
ISO 14520-12-2000 |
气体灭火系统.物理特性和系统设计.第12部分:IG-01灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant) |
ISO 14520-13-2000 |
气体灭火系统.物理特性和系统设计.第13部分:IG-100灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant) |
ISO 14520-14-2000 |
气体灭火系统.物理特性和系统设计.第14部分:IG-55灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant) |
ISO 14520-15-2000 |
气体灭火系统.物理特性和系统设计.第15部分:IG-541灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant) |
ISO 14520-2 Technical Corrigendum 1-2001 |
气体灭火系统.物理特性和系统设计.第2部分:CFI灭火剂.技术勘误1 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CFl extinguishant; Technical Corrigendum 1) |
ISO 14520-2-2000 |
气体灭火系统.物理特性和系统设计.第2部分:CFI灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CFl extinguishant) |
ISO 14520-3-2000 |
气体灭火系统.物理特性和系统设计.第3部分:FC-2-1-8灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 3: FC-2-1-8 extinguishant) |
ISO 14520-4-2000 |
气体灭火系统.物理特性和系统设计.第4部分:FC-3-1-10灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 4: FC-3-1-10 extinguishant) |
ISO 14520-6-2000 |
气体灭火系统.物理特性和系统设计.第6部分:HCFC混合A的灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 6: HCFC Blend A extinguishant) |
ISO 14520-7-2000 |
气体灭火系统.物理特性和系统设计.第7部分:HCFC 124灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 7: HCFC 124 extinguishant) |
ISO 14520-8-2000 |
气体灭火系统.物理特性和系统设计.第8部分:HCFC 125灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HCFC 125 extinguishant) |
ISO 14520-9-2000 |
气体灭火系统.物理特性和系统设计.第9部分:HFC 227ea灭火剂 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant) |
ISO 14523-1999 |
摄影术.经加工的照相材料.密封材料的摄影活性试验 |
(Photography - Processed photographic materials - Photographic activity test for enclosure materials) |
ISO 14524-1999 |
摄影.电子静止图像照相机.测量光电子转换功能方法 |
(Photography - Electronic still-picture cameras - Methods for measuring opto-electronic conversion functions (OECFs)) |
ISO 14526-1-1999 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名称与符号系统和规范基础 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications) |
ISO 14526-2-1999 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:试验样品的准备和特性的测定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
ISO 14526-3-1999 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds) |
ISO 14527-1-1999 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名称与符号系统和规范基础 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications) |
ISO 14527-2-1999 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:样品的准备和特性的测定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
ISO 14527-3-1999 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:对所选的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds) |
ISO 14528-1-1999 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).第1部分:名称与符号系统和规范基础 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications) |
ISO 14528-2-1999 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).第2部分:试验样品的准备和特性的测定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
ISO 14528-3-1999 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).第3部分:对所选择的模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds) |
ISO 14529-1-1999 |
塑料.蜜胺/苯酚粉末模塑化合物(MP-PMCs).第1部分:名称与符号系统和规范基础 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications) |
ISO 14529-2-1999 |
塑料.蜜胺/苯酚粉末模塑化合物(MP-PMCs).第2部分:试样的制备和特性的测定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
ISO 14529-3-1999 |
塑料.蜜胺/苯酚粉末模塑化合物(MP-PMCs).第3部分:对选定的模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds) |
ISO 14530-1-1999 |
塑料.不饱和聚酯粉末模塑化合物(UP-PMCs).第1部分:名称与符号系统和规范基础 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications) |
ISO 14530-2-1999 |
塑料.不饱和聚酯粉末模塑化合物(UP-PMCs).第2部分:试样的制备和特性的测定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
ISO 14530-3-1999 |
塑料.不饱和聚酯粉末模塑化合物(UP-PMCs).第3部分:对所选定的模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds) |
ISO 14531-1-2002 |
塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.第1部分:管 |
(Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels; Metric series; Specifications - Part 1: Pipes) |
ISO 14531-2-2004 |
塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.规范.第2部分:热熔连接用配件 |
|
ISO 14532-2001 |
天然气.词汇 |
(Natural gas - Vocabulary) |
ISO 14534-2002 |
眼科光学.隐形眼镜和接触透镜保护产品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements) |
ISO 14535-2001 |
摄影.电子扫描仪、成像胶片和胶卷的室光负载包装件.尺寸和有关要求 |
(Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements) |
ISO 14539-2000 |
操作工业机器人.带抓爪的物料搬运.词汇和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics) |
ISO 14546-2000 |
摄影术.航空摄影胶片和卷轴.尺寸 |
(Photography - Aerial films and spools - Dimensions) |
ISO 14548-1998 |
摄影.玻璃板的尺寸 |
(Photography - Dimensions of glass plates) |
ISO 14554-1-2000 |
焊接质量要求.金属材料的电阻焊接.第1部分:综合质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements) |
ISO 14554-2-2000 |
焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements) |
ISO 14555-1998 |
焊接.金属材料的电弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials) |
ISO 14556-2000 |
钢.却贝V形切痕摆式冲击试验.仪器试验法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method) |
ISO 14557-2002 |
消防水龙带.橡胶和塑料制吸入软管和软管组件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies) |
ISO 14558-2000 |
橡胶.用红外光谱法测定氢化丁腈橡胶的残留不饱和物 |
(Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy) |
ISO 1456-2003 |
金属镀层.镍加铬的电镀层和铜加镍再加铬的电镀层 |
(Metallic coatings - Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium) |
ISO 1456-2003 |
金属镀层.镍加铬的电镀层和铜加镍再加铬的电镀层 |
|
ISO 14560-2004 |
按属性验收取样规程.每百万不合格产品中规定的质量等级 |
|
ISO 14565-2000 |
动物饲料.维生素A含量的测定.使用高性能液相色谱法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography) |
ISO 14572-2001 |
道路车辆.圆型无屏蔽60V和600V多芯铠装电缆.基本性能和高性能电缆的试验方法和要求 |
(Road vehicles - Round, unscreened 60 V and 600 V multicore sheathed cables - Test methods and requirements for basic and high performance cables) |
ISO 14573-2002 |
软靴用滑雪板绳带装配.要求和试验方法 |
(Snowboard strap bindings for soft boots - Requirements and test methods) |
ISO 14577-1-2002 |
金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method) |
ISO 14577-2-2002 |
金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines) |
ISO 14577-3-2002 |
金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks) |
ISO 14579-2001 |
圆柱头内六角螺钉 |
(Hexalobular socket head cap screws) |
ISO 1458-2002 |
金属镀层.镍的电镀层 |
(Metallic coatings - Electrodeposited coatings of nickel) |
ISO 14580 Technical Corrigendum 1-2004 |
内六角圆头螺钉.技术勘误1 |
|
ISO 14580-2001 |
凸头内六角螺钉 |
(Hexalobular socket cheese head screws) |
ISO 14583 Technical Corrigendum 1-2004 |
内六角盘头螺钉.技术勘误1 |
|
ISO 14583-2001 |
平头内六角螺钉 |
(Hexalobular socket pan head screws) |
ISO 14584-2001 |
沉头内六角螺钉 |
(Hexalobular socket raised countersunk head screws) |
ISO 14585 Technical Corrigendum 1-2004 |
六角内孔平头攻丝螺钉;技术勘误1 |
|
ISO 14585-2001 |
平头内六角攻丝螺钉 |
(Hexalobular socket pan head tapping screws) |
ISO 14586-2001 |
沉头内六角攻丝螺钉 |
(Hexalobular socket countersunk head tapping screws) |
ISO 14587-2001 |
半沉头(椭圆形)内六角攻丝螺钉 |
(Hexalobular socket raised countersunk (oval) head tapping screws) |
ISO 14588-2000 |
沉头铆钉.术语和定义 |
(Blind rivets - Terminology and definitions) |
ISO 14589-2000 |
沉头铆钉.机械试验 |
(Blind rivets - Mechanical testing) |
ISO 14590-1999 |
具有高拉伸强度和改善成型低屈服点的冷轧钢片 |
(Cold-reduced steel sheet of high tensile strength and low yield point with improved formability) |
ISO 14592-1-2002 |
水质.评价低浓度时有机化合物有氧生物降解能力.第1部分:地表水或地表水/悬浮质泥沙摇瓶试验 |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds at low concentrations - Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions) |
ISO 14592-2-2002 |
水质.评价低浓度时有机化合物有氧生物降解能力.第2部分:附有生物量的连续流动河床模型 |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds at low concentrations - Part 2: Continuous flow river model with attached biomass) |
ISO 14593-1999 |
水质.含水介质中有机化合物基本好氧生物降解能力的评定.密封容器中无机碳的分析方法(CO2液上气体试验) |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO headspace test)) |
ISO 14594-2003 |
微电子束分析.电子探测微观分析.波长色散光谱学用实验参数的测定指南 |
(Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy) |
ISO 14594-2003 |
微电子束分析.电子探测微观分析.波长色散光谱学用实验参数的测定指南 |
|
ISO 14595-2003 |
微光束分析.电子探测微量分析.检定标样(CRMs)的规范指南 |
(Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)) |
ISO 14595-2003 |
微光束分析.电子探测微量分析.检定标样(CRMs)的规范指南 |
|
ISO 14596 Technical Corrigendum 1-1999 |
石油产品.硫含量测定.波长色散X射线荧光光谱法.技术勘误1 |
(Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry; Technical corrigendum 1) |
ISO 14596-1998 |
石油产品.硫含量测定.波长色散X射线荧光光谱法 |
(Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry) |
ISO 14597-1997 |
液体燃料检验.钒和镍含量的测定.X射线荧光分析法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry) |
ISO 1460-1992 |
金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量 |
(Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area) |
ISO 14602-1998 |
稳定的外科植入物.骨接合术用植入物.特殊要求 |
(Non-active surgical implants - Implants for Osteosynthesis - Particular requirements) |
ISO 14606-2000 |
表面化学分析.溅射深度剖面测定.作为参考材料的层系统最优化 |
(Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials) |
ISO 14607-2002 |
外科植入物.乳房植入物的特殊要求 |
(Implants for surgery - Specific requirements for mammary implants) |
ISO 1461-1999 |
加工的钢铁制品的热镀锌层.规范和试验方法 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods) |
ISO 14612-2004 |
船舶和海上技术.船桥布置和相关设备.船桥的集中和综合功能的附加要求和指南 |
|
ISO 14615-1997 |
粘结剂.结构粘结接头的耐久性.有荷载并暴露在湿度和温度之下 |
(Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load) |
ISO 14616-1997 |
塑料.聚乙烯,乙烯共聚物以及它们的混合物的热可缩薄膜.收缩应力的测定 |
(Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress) |
ISO 14617-1-2002 |
图表用图形符号.第1部分:一般信息和索引 |
(Graphical symbols for diagrams - Part 1: General information and indexes) |
ISO 14617-10-2002 |
图表用图形符号.第10部分:液压变流器 |
(Graphical symbols for diagrams - Part 10: Fluid power converters) |
ISO 14617-11-2002 |
图表用图形符号.第11部分:热传递装置和热发电机 |
(Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines) |
ISO 14617-12-2002 |
图表用图形符号.第12部分:分离、净化和混合装置 |
(Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing) |
ISO 14617-13-2004 |
图表用图形符号.第13部分:物料加工用装置 |
|
ISO 14617-14-2004 |
图表用图形符号.第14部分:物料运输和搬运用装置 |
|
ISO 14617-15-2002 |
图表用图形符号.第15部分:安装图和网络图 |
(Graphical symbols for diagrams - Part 15: Installation diagrams and network maps) |
ISO 14617-2-2002 |
图表用图形符号.第2部分:通用符号 |
(Graphical symbols for diagrams - Part 2: Symbols having general application) |
ISO 14617-3-2002 |
图表用图形符号.第3部分:连接件和相关装置 |
(Graphical symbols for diagrams - Part 3: Connections and related devices) |
ISO 14617-4-2002 |
图表用图形符号.第4部分:传动装置和相关装置 |
(Graphical symbols for diagrams - Part 4: Actuators and related devices) |
ISO 14617-5-2002 |
图表用图形符号.第5部分:测量和控制装置 |
(Graphical symbols for diagrams - Part 5: Measurement and control deivices) |
ISO 14617-6-2002 |
图表用图形符号.第6部分:测量和控制功能 |
(Graphical symbols for diagrams - Part 6: Measurement and control functions) |
ISO 14617-7-2002 |
图表用图形符号.第7部分:基本机械组件 |
(Graphical symbols for diagrams - Part 7: Basic mechanical components) |
ISO 14617-8-2002 |
图表用图形符号.第8部分:阀门和气流调节器 |
(Graphical symbols for diagrams - Part 8: Valves and dampers) |
ISO 14617-9-2002 |
图表用图形符号.第9部分:泵、压缩机和风扇 |
(Grahical symbols for diagrams - Part 9: Pumps, compressors and fans) |
ISO 14619-2003 |
航天系统.空间实验.一般要求 |
(Space systems - Space experiments - General requirements) |
ISO 14619-2003 |
航天系统.空间实验.一般要求 |
|
ISO 14620-1-2002 |
航天系统.安全要求.第1部分:系统安全 |
(Space systems - Safety requirements - Part 1: System safety) |
ISO 14620-2-2000 |
空间系统.安全要求.第2部分:发射场操作 |
(Space systems-- Safety requirments - Part 2: Launch site operations) |
ISO 14621-1-2003 |
航天系统.电气、电子和电气机械(EEE)零件.第1部分:零件管理 |
(Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management) |
ISO 14621-1-2003 |
航天系统.电气、电子和电气机械(EEE)零件.第1部分:零件管理 |
|
ISO 14621-2-2003 |
航天系统.电气、电子和机电件.第2部分:控制程序要求 |
(Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 2: Control programme requirements) |
ISO 14621-2-2003 |
航天系统.电气、电子和机电件.第2部分:控制程序要求 |
|
ISO 14622-2000 |
航空系统.结构设计.负载和外界感应因素 |
(Space systems - Structural design - Loads and induced environment) |
ISO 14623-2003 |
航天系统.压力容器及承压结构.设计与操作 |
|
ISO 14624-1-2003 |
航天系统.材料的安全和兼容性.第1部分:材料向上易燃性的测定 |
(Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials) |
ISO 14624-1-2003 |
航天系统.材料的安全和兼容性.第1部分:材料向上易燃性的测定 |
|