标准号 |
中文名称 |
英文名称 |
ISO 7591-1982 |
道路车辆.汽车和挂车的反光注册牌照.规范 |
Road vehicles; Retro-reflective registration plates for motor vehicles and trailers; Specification |
ISO 7592-1983 |
标定的圆钢链节提升链条.正确使用和保养导则 |
Calibrated round steel link lifting chains; Guidelines to proper use and maintenance |
ISO 7593-1986 |
非焊接装配的链式索具.等级T(8) |
Chain slings assembled by methods other than welding; Grade T(8) |
ISO 7595-1984 |
钢索的套接步骤.熔融金属的套接 |
Socketing procedures for wire ropes; Molten metal socketing |
ISO 7597-1987 |
T(8)级的钢链使用的带尖和环孔的锻造起重钩 |
Forged steel lifting hooks with point and eye for use with steel chains of grade T(8) |
ISO 7598-1988 |
适于按照ISO 7/1攻丝用不锈钢管 |
Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
ISO 7599-1983 |
铝及其合金的阳极氧化.铝的阳极氧化物镀层的一般规范 |
Anodizing of aluminium and its alloys; General specifications for anodic oxide coatings on aluminium |
ISO 76 AMD 1-1999 |
滚动轴承.额定静负载.修改件1:附录A(信息).基础额定静负载计算的不连续性 |
Rolling bearings - Static load ratings; Amendment 1: Annex A (informative) - Discontinuities in the calculation of basic static load ratings |
ISO 76-1987 |
滚动轴承.额定静负载 |
Rolling bearings; Static load ratings |
ISO 760-1978 |
水的测定.卡尔费希尔(KarlFischer)法(一般方法) |
Determination of water; Karl Fischer method (General method) |
ISO 7606-1988 |
造船.内河船.吃水表尺 |
Shipbuilding; inland navigation vessels; draught scales |
ISO 7607-1984 |
造船.内河航行.多斗式挖泥船.挖斗容量标度 |
Shipbuilding; Inland navigation; Multi-bucket dredgers; Scale of bucket capacities |
ISO 7608-1985 |
造船.内河航行.含油混合物和污水管接头 |
Shipbuilding; Inland navigation; Couplings for disposal of oily mixture and sewage water |
ISO 7609-1985 |
香精油.在毛细管填料柱中用气相色谱法分析.一般方法 |
Essential oils; Analysis by gas chromatography on capillary columns; General method |
ISO 761-1977 |
工业用乙酸酐和丁醇.溴值的测定 |
Acetic anhydride and butan-1-ol for industrial use; Determination of bromine number |
ISO 7611-1985 |
用机加工制取的柠檬油和橙叶油以及白柠檬油(橙花醛+香叶醛)含量的测定毛细管色相色谱法 |
Oils of lemon and petitgrain citronnier, and oil of lime obtained by a mechanical process; Determination of citral (neral + geranial) content; Gas chromatographic method on capillary columns |
ISO 7612-1994 |
柴油发动机.安装直列式燃油喷射泵的基座 |
Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions |
ISO 7616-1986 |
硬质泡沫塑料.在特定的载荷和温度条件下压缩蠕变的测定 |
Cellular plastics, rigid; Determination of compressive creep under specified load and temperature conditions |
ISO 7617-1-2001 |
室内装饰用塑料涂层织物.第1部分:聚氯乙烯涂层针织物的规范 |
Plastics-coated fabrics for upholstery - Part 1: Specification for PVC-coated knitted fabrics |
ISO 7617-2-1994 |
塑料.室内装饰用涂覆材料.第2部分:PVC涂覆编织物的规范 |
Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics |
ISO 7617-2-2003 |
室内装饰用塑料涂覆织物.第2部分:聚氯乙烯涂覆纺织品的规范 |
(Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics) |
ISO 7617-2-2003 |
室内装饰用塑料涂覆织物.第2部分:聚氯乙烯涂覆纺织品的规范 |
|
ISO 7617-3-1988 |
塑料.室内装饰用涂覆材料.第3部分:聚氨脂涂覆编织物规范 |
Plastics-coated fabrics for upholstery; part 3: specification for polyurethane-coated woven fabrics |
ISO 7619-1-2004 |
硫化橡胶或热塑性橡胶.压痕硬度的测定.第1部分:硬度计法(肖氏硬度) |
|
ISO 7619-1-2004 |
硫化橡胶或热塑性橡胶.压痕硬度的测定.第1部分:硬度计法(肖氏硬度) |
|
ISO 7619-1997 |
橡胶.用袖珍硬度计测定压痕硬度 |
Rubber - Determination of indentation hardness by means of pocket hardness meters |
ISO 7619-2-2004 |
硫化橡胶或热塑性橡胶.压痕硬度的测定.第2部分:IRHD袖珍测试计法 |
|
ISO 7619-2-2004 |
硫化橡胶或热塑性橡胶.压痕硬度的测定.第2部分:IRHD袖珍测试计法 |
|
ISO 762-1982 |
水果和蔬菜制品.矿物杂质含量的测定 |
Fruit and vegetable products; Determination of mineral impurities content |
ISO 762-2003 |
水果和蔬菜制品.矿物杂质含量的测定 |
(Fruit and vegetable products - Determination of mineral impurities content ) |
ISO 762-2003 |
水果和蔬菜制品.矿物杂质含量的测定 |
|
ISO 7620-1986 |
橡胶材料.耐化学性 |
Rubber materials; Chemical resistance |
ISO 7622-1-1984 |
钢丝芯线输送机皮带.纵向牵引试验.第1部分:伸长的测量 |
Steel cord conveyor belts; Longitudinal traction test; Part 1 : Measurement of elongation |
ISO 7622-2-1984 |
钢丝芯线输送机皮带.纵向牵引试验.第2部分:抗拉强度的测量 |
Steel cord conveyor belts; Longitudinal traction test; Part 2 : Measurement of tensile strength |
ISO 7623-1996 |
钢丝芯线输送机皮带.缆索涂层粘合力试验.最初试验和后期处理 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
ISO 7624-1997 |
石油产品和润滑剂.抑制矿物质涡轮机油.氧化稳定性的测定 |
Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability |
ISO 7625-1983 |
不包括硬质合金的烧结金属材料.测定碳含量用化学分析的样品制备 |
Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content |
ISO 7626-1-1986 |
振动和冲击.机械灵活性的实验测定.第1部分:基本定义和传感器 |
Vibration and shock; Experimental determination of mechanical mobility; Part 1 : Basic definitions and transducers |
ISO 7626-2-1990 |
振动和冲击.力导纳的实验测定.第2部分:利用带附加激振器的单点平移激发的测量 |
Vibration and shock; experimental determination of mechanical mobility; part 2: measurements using single-point translation excitation with an attached vibration exciter |
ISO 7626-5-1994 |
振动和冲击.力导纳的实验测定.第5部分:使用与结构不连接的激发器用冲击激发法进行测量 |
Vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
ISO 7627-1-1983 |
硬质合金.火焰原子吸收光谱法的化学分析.第1部分:一般要求 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 1 : General requirements |
ISO 7627-2-1983 |
硬质合金.火焰原子吸收光谱法的化学分析.第2部分:含量为0.001%-0.02%(m/m)(平均克分子)的钙、钾、镁和钠含量的测定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 2 : Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) |
ISO 7627-3-1983 |
硬质合金.火焰原子吸收光谱法的化学分析.第3部分:含量为0.01%-0.5%(m/m)(平均克分子)的钴、铁、锰和镍含量的测定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 3 : Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) |
ISO 7627-4-1983 |
硬质合金.火焰原子吸收光谱法的化学分析.第4部分:含量为0.01%—0.5%(m/m)(平均克分子)的钼、钛和钒含量的测定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 4 : Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) |
ISO 7627-5-1983 |
硬质合金.火焰原子吸收光谱法的化学分析.第5部分:含量为0.5%—2%(m/m)(平均克分子)的钴、铁、锰、钼、镍、钛和钒含量的测定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 5 : Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) |
ISO 7627-6-1985 |
硬质合金.火焰原子吸收光谱法进行化学分析.第6部分:在0.0%-2%(m/m)范围内的铬含量的测定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 6 : Determination of chromium in contents from 0,01 to 2 % (m/m) |
ISO 7628-1-1998 |
道路车辆.气压制动系统用热塑管材.第1部分:尺寸和标记 |
Road vehicles - Thermoplastics tubing for air braking systems - Part 1: Dimensions and marking |
ISO 7628-2 Technical Corrigendum 1-1999 |
道路车辆.用于气压制动系统中的热塑管材.第2部分:车辆固定和试验方法.技术勘误1 |
Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods; Technical Corrigendum 1 |
ISO 7628-2-1998 |
道路车辆.气压制动系统用热塑管材.第2部分:车辆上的装配及试验方法 |
Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods |
ISO 7629-1987 |
道路车辆.制动闸衬.圆形制动垫片.试验后表面和材料伤残的评定 |
Road vehicles; Brake linings; Disc brake pads; Evaluation of surface and material flaws after testing |
ISO 763-1982 |
水果和蔬菜制品.盐酸不溶性灰分的测定 |
Fruit and vegetable products; Determination of ash insoluble in hydrochloric acid |
ISO 763-2003 |
水果和蔬菜制品.盐酸不溶性灰分的测定 |
(Fruit and vegetable products - Determination of ash insoluble in hydrochloric acid ) |
ISO 763-2003 |
水果和蔬菜制品.盐酸不溶性灰分的测定 |
|
ISO 7630-1985 |
道路车辆.使用石油基液压制动液的鼓式轮闸液压缸的弹性O形密封圈(最大工作温度120℃) |
Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
ISO 7631-1985 |
道路车辆.使用石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封垫圈(最大工作温度120℃) |
Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
ISO 7632-1985 |
道路车辆.使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫圈(最大工作温度120℃) |
Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
ISO 7633-1985 |
道路车辆.使用石油基液压制动液的鼓式轮闸液压缸的弹性保护罩(最大工作温度120℃) |
Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
ISO 7634-1995 |
牵引车.压缩空气制动系统.制动性能的测量 |
Towed road vehicles - Compressed-air braking systems - Measurement of braking performance |
ISO 7634-2003 |
道路车辆.压缩空气制动系统.试验程序 |
(Road vehicles - Compressed-air braking systems - Test procedures) |
ISO 7634-2003 |
道路车辆.压缩空气制动系统.试验程序 |
|
ISO 7635-1991 |
道路车辆.气动或充气式液压制动系统.制动性能的测量 |
Road vehicles; air or air over hydraulic braking systems; measurement of braking performance |
ISO 7635-2003 |
道路车辆.机动车辆用气压或气动-液压制动系统(包括有电子控制功能的机动车辆).试验规程 |
(Road vehicles - Air or air-over hydraulic braking systems for motor vehicles (including those with electronic control functions) - Test procedures ) |
ISO 7635-2003 |
道路车辆.机动车辆用气压或气动-液压制动系统(包括有电子控制功能的机动车辆).试验规程 |
|
ISO 7636-1984 |
自行车和轻便摩托车车铃.技术规范 |
Bells for bicycles and mopeds; Technical specifications |
ISO 7637-1-2002 |
道路车辆.由传导和耦合引起的电干扰.第1部分:定义和总则 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
ISO 7637-2-1990 |
道路车辆.电导和耦合引起的电干扰.第2部分:标称电源电压24V的商用车辆.仅沿电源线的瞬间电导 |
Road vehicles; electrical disturbance by conduction and coupling; part 2: commercial vehicles with nominal 24 V supply voltage; electrical transient conduction along supply lines only |
ISO 7637-2-2004 |
道路车辆.传导和耦合引起的电干扰.第2部分:仅沿电源线瞬间电导 |
|
ISO 7637-3 Technical Corrigendum 1-1995 |
道路车辆.电导和耦合引起的电干扰.第3部分:标称电源电压12V或24V的车辆.通过电容耦合和电感耦合经由线不同于电源线瞬间电传输.技术勘误表1 |
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V and 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines; Technical Corrigendu |
ISO 7637-3-1995 |
道路车辆.电导和耦合引起的电干扰.第3部分:标称电源电压12V或24V的车辆.通过电容耦合和电感耦合经由线不同于电源线瞬间电传输 |
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
ISO 7638-1 Technical Corrigendum 1-1998 |
道路车辆.制动系统用电连接器.第1部分:24 V额定电源电压用连接器.技术勘误1 |
Road vehicles - Electrical connectors for braking systems - Part 1: Connectors for 24 V nominal supply voltage; Technical Corrigendum 1 |
ISO 7638-1-1997 |
道路车辆.制动系统用电连接器.第1部分:24 V标称电源电压用连接器 |
Road vehicles - Electrical connectors for braking systems - Part 1: Connectors for 24 V nominal supply voltage |
ISO 7638-1-2003 |
道路车辆.牵引车和挂车的电气连接用连接器.第1部分:具有24V标称电源电压的车辆的制动系统和行驶系用连接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage ) |
ISO 7638-1-2003 |
道路车辆.牵引车和挂车的电气连接用连接器.第1部分:具有24V标称电源电压的车辆的制动系统和行驶系用连接器 |
|
ISO 7638-2 Technical Corrigendum 1-1998 |
道路车辆.制动系统用电连接器.第2部分:12 V额定电源电压用连接器.技术勘误2 |
Road vehicles - Electrical connectors for braking systems - Part 2: Connectors for 12 V nominal supply voltage; Corrigendum 1 |
ISO 7638-2-1997 |
道路车辆.制动系统用电连接器.第2部分:12 V标称电源电压用连接器 |
Road vehicles - Electrical connectors for braking systems - Part 2: Connectors for 12 V nominal supply voltage |
ISO 7638-2-2003 |
道路车辆.牵引车和挂车的电气连接用连接器.第2部分:具有12V标称电源电压的车辆的制动系统和行驶系用连接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage ) |
ISO 7638-2-2003 |
道路车辆.牵引车和挂车的电气连接用连接器.第2部分:具有12V标称电源电压的车辆的制动系统和行驶系用连接器 |
|
ISO 7639-1985 |
道路车辆.故障诊断系统.图形符号.两种语言版 |
Road vehicles; Diagnostic systems; Graphical symbols Bilingual edition |
ISO 764-2002 |
计时仪器.防磁表 |
Horology - Magnetic resistant watches |
ISO 7641-1-1983 |
道路车辆.旅居车和轻型挂车.牵引杆的机械强度计算.第1部分:钢牵引杆 |
Road vehicles; Caravans and light trailers; Calculation of the mechanical strength of the drawbar; Part 1 : Steel drawbars |
ISO 7642-1991 |
旅居挂车和轻型挂车.具有超速控制闸的0类和0类挂车.制动闸惯量台架试验方法 |
Caravans and lights trailers; trailers of categories O and O with overrun brakes; inertia bench test methods for brakes |
ISO 7643-1991 |
旅居挂车和轻型挂车.具有超速控制闸的O(1)类和O(2)类挂车.闸控制线性台架试验法 |
Caravans and light trailers; trailers of categories O and O with overrun brakes; linear bench test methods for brake controls |
ISO 7646-1986 |
商业用车辆和公共汽车.齿轮箱法兰.A型 |
Commercial vehicles and buses; Gearbox flanges; Type A |
ISO 7647-1986 |
商业用车辆和公共汽车.齿轮箱法兰.S型 |
Commercial vehicles and buses; Gearbox flanges; Type S |
ISO 7648-1987 |
往复式内燃机飞轮壳.公称尺寸和公差 |
Flywheel housings for reciprocating internal combustion engines; Nominal dimensions and tolerances |
ISO 7649-1991 |
往复式内燃机离合器壳体.公称尺寸和公差 |
Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances |
ISO 765-1976 |
不用通俗名称的农药.三种语言版 |
Pesticides considered not to require common names Trilingual edition |
ISO 7650 AMD 1-2001 |
商用车辆和公共汽车.1、2、3和4类起动发动机的安装尺寸.修改件1 |
Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1 |
ISO 7650-1987 |
商业用车辆和公共汽车.1、2、3和4型起动电机的装配尺寸 |
Commercial vehicles and buses; Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
ISO 7651-1991 |
商业用车辆和公共汽车.1、2、3型交流发电机安装尺寸 |
Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3 |
ISO 7652 AMD 1-1992 |
第1次修改 |
Road vehicles; base-mounted air compressors, single cylinder V-belt drive; mounting dimensions; amendment 1 |
ISO 7652-1983 |
道路车辆.单缸三角皮带传动基座安装的空气压缩机.安装尺寸 |
Road vehicles; Base-mounted air compressors, single cylinder V-belt drive; Mounting dimensions |
ISO 7653-1985 |
道路车辆.商业用车辆.动力输出装置(PTO)和辅助传动机组之间的联结器 |
Road vehicles; Commercial vehicles; Couplings between power take-offs (PTO) and ancillary driven units |
ISO 7654-1998 |
道路车辆.柴油发动机用离心式燃油滤清器.装配和连接尺寸 |
Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
ISO 7656-1993 |
商业用道路车辆.尺寸代码 |
Commercial road vehicles; dimensional codes |
ISO 7657-1995 |
管道工程.条绕式可曲挠金属软管的一般要求 |
Pipework - General requirements for stripwound flexible metal hoses |
ISO 7658-1984 |
管道工程.条绕式柔性金属软管.特性试验和验证 |
Pipework; Stripwound flexible metal hoses; Testing and verification of characteristics |
ISO 7660-1983 |
香精油.含有难于皂化的酯类香精油酯值的测定 |
Essential oils; Determination of ester value of oils containing difficult-to-saponify esters |
ISO 7661-1984 |
航空航天.流体动力系统.按轴向校准的管道夹块.设计标准和质量鉴定试验.米制系列 |
Aerospace; Fluid systems; Clamp blocks for tube lines having axial alignment; Design standard and qualification testing; Metric series |
ISO 7662-1988 |
橡胶和塑料管.内衬磨损的测定 |
Rubber and plastics hoses; determination of abrasion of lining |
ISO 7663-1995 |
卤化异丁烯一戊二烯橡胶(BIIR和CIIR).评估程序 |
Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures |
ISO 7664-2000 |
生橡胶、天然橡胶和生合成橡胶.存储通用指南 |
Rubber, raw, natural and raw synthetic - General guidance on storage |
ISO 7665-1983 |
信息处理.信息交换用盒式软磁盘的文件结构和标号 |
Information processing; File structure and labelling of flexible disk cartridges for information interchange |
ISO 7668-1986 |
阳极化铝和铝合金.20°、45°、60°或85°角的镜面反射和镜面光泽的测量 |
Anodized aluminium and aluminium alloys; measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
ISO 7671-1991 |
建筑物内污物和废物排放(耐低温和高温)系统用聚丙烯管道和管配件(由弹性密封环连接).规范 |
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
ISO 7671-2003 |
建筑物内污、废水排放(低温和高温)用塑料管道系统.聚丙烯(PP) |
(Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) ) |
ISO 7671-2003 |
建筑物内污、废水排放(低温和高温)用塑料管道系统.聚丙烯(PP) |
|
ISO 7675-1991 |
建筑物内污物和废物排放(耐低温和高温)系统用聚氯乙烯管和配件.规范 |
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
ISO 7675-2003 |
建筑物内污、废水(低温和高温)排放用塑料管道系统.氯化聚氯乙烯 |
(Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)) |
ISO 7675-2003 |
建筑物内污、废水(低温和高温)排放用塑料管道系统.氯化聚氯乙烯 |
|
ISO 768-1972 |
建筑用纤维板.弯曲强度的测定 |
Fibre building boards; Determination of bending strength |
ISO 7682-1991 |
建筑物内污物和废物排放(耐低温和高温)系统用丙烯晴/丁二烯/苯乙烯管和配件.规范 |
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
ISO 7682-2003 |
建筑物内污、废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯(ABS) |
(Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS) ) |
ISO 7682-2003 |
建筑物内污、废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯(ABS) |
|
ISO 7684-1997 |
塑料管系统.玻璃增强热固性塑料(GRP)管.干燥条件下测定蠕变因素 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
ISO 7685-1998 |
塑料管道系统.玻璃增强热固塑料(GRP)管.最初的指定塑料环硬度测定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
ISO 7686-1992 |
塑料管和配件.不透明度.试验方法 |
Plastics pipes and fittings; opacity; test method |
ISO 7689-1988 |
航空航天.强度类别1100MPa和MJ螺纹的合金钢螺栓.采购规格 |
Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
ISO 769-1972 |
建筑用纤维板.硬板和中硬板.浸水后吸水性和厚度膨胀的测定 |
Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water |
ISO 7692-1983 |
钛铁.钛含量的测定.滴定法 |
Ferrotitanium; Determination of titanium content; Titrimetric method |