标准号 |
中文名称 |
英文名称 |
BS EN ISO 3727-2-2002 |
黄油.水、非脂固体及脂肪含量的测定.非脂固体含量的测定(参照法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)) |
BS EN ISO 3727-3-2003 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.脂肪含量的计算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Calculation of fat content) |
BS EN ISO 3735-1999 |
原油和燃料油.沉积物的测定.萃取法 |
(Crude petroleum and fuel oils - Determination of sediment - Extraction method) |
BS EN ISO 3740-2001 |
声学.噪声源的声压级的测定.基本标准使用导则 |
(Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards) |
BS EN ISO 3741-2000 |
声学.用声压测定噪声源声音功率级.混响室内的精密方法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms) |
BS EN ISO 3743-1-1994 |
声学.噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法.第1部分:硬墙试验室的比较分析法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms) |
BS EN ISO 3743-2-1995 |
声学.噪声源的声功率级测定.在混响场中对可移动声源的工程测量方法.用专用混响试验室的测量方法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms) |
BS EN ISO 3744-1994 |
声学.噪声源音响功率级的测定 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane) |
BS EN ISO 3746-1996 |
声学.噪声源音响功率级的测定.在反射平面上利用包封测量表面的测量法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane) |
BS EN ISO 3747-2000 |
声学.利用声压测定噪声源的声功率级.现场比较法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ) |
BS EN ISO 3759-1995 |
纺织材料.尺寸变化测定用试验纤维样品和服装的制备、做标记和测量 |
(Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change) |
BS EN ISO 376-2002 |
金属材料.单轴向试验机验证用测力仪的校正 |
(Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines) |
BS EN ISO 376-2004 |
金属材料.验证单轴向试验机用测力仪的校准 |
|
BS EN ISO 3766-1999 |
建筑制图.混凝土加筋的简化表示法 |
(Construction drawings - Simplified representation of concrete reinforcement) |
BS EN ISO 3766-2004 |
建筑制图.混凝土钢筋的简化表示法 |
|
BS EN ISO 3767-1-2000 |
拖拉机、农业和林业机械、除草机和园艺设备.操作者控制符号和其它显示符号.通用符号 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Common symbols (review)) |
BS EN ISO 3767-3-1996 |
拖拉机.农业和林业机械,动力刈草机和园圃设备.操作控制和其它显示符号.动力刈草机和园圃设备符号 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for powered lawn and garden equipment) |
BS EN ISO 3767-5-1996 |
拖拉机,农业和林业机械.动力除草机和园艺设备.操纵者控制装置和其它显示器的符号.第5部分:手动便携式林业机 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for manual portable forestry machinery) |
BS EN ISO 377-1997 |
锻钢试样和试样的选择与制备.第1部分:机械性能试验用的样品和试样 |
(Steel and steel products - Location and preparation of samples and test pieces for mechanical testing) |
BS EN ISO 3785-1995 |
钢.试件斧的名称与符号 |
(Steel - Designation of test piece axes) |
BS EN ISO 3815-1-2005 |
锌和锌合金.用光辐射光谱测定法分析固体样品 |
|
BS EN ISO 3822-1-1999 |
声学.用于供水设施的装置和设备发出的噪音的实验室试验.测量方法 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Method of measurement) |
BS EN ISO 3822-2-1996 |
声学.由供水设施和设备发出噪音的实验室试验.放水龙头的安装和工作条件 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves) |
BS EN ISO 3822-3-1997 |
声学.由供水设施和设备发出噪音的实验室试验.第3部分:管路阀门和附件的安装和工作条作 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for in-line valves and appliances) |
BS EN ISO 3822-4-1997 |
声学.由供水设施和设备发出的噪音的实验室试验.第4部分:专用装置的安装和工作条件 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for special appliances) |
BS EN ISO 3823-1-1999 |
牙科用旋转器械.牙钻.钢制牙钻和硬质合金牙钻 |
(Dental rotary instruments - Burs - Steel and carbide burs) |
BS EN ISO 3823-2-2003 |
牙科用旋转牙钻器械.精加工牙钻 |
(Dental rotary instruments - Burs - Finishing burs) |
BS EN ISO 3830-1996 |
石油产品.汽油中铅含量的测定.一氯化碘法 |
(Petroleum products - Determination of lead content of gasoline - Iodine monochloride method) |
BS EN ISO 3838-1985 |
原油和液体或固体石油产品的密度或相对密度的测定.(比重瓶法) |
(Methods for determination of density or relative density of petroleum and petroleum products (pyknometer methods)) |
BS EN ISO 3838-2004 |
石油及其制品的试验方法.BS 2000-189/190:原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
|
BS EN ISO 3861-1996 |
喷砂用橡胶软管.规范 |
(Rubber hoses for sand and grit blasting - Specification) |
BS EN ISO 3868-1995 |
金属和其他无机物涂层.涂层厚度的测量.菲索(Fizeau)多光束干涉仪法 |
(Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method) |
BS EN ISO 3882-2003 |
金属和其他无机物覆层.厚度测量方法述评 |
(Metallic and other inorganic coatings - Review of methods of measurement of thickness) |
BS EN ISO 3887-2003 |
钢.脱碳层的测定 |
(Steels - Determination of depth of decarburization) |
BS EN ISO 389-1-2000 |
声学.音响设备校正标准参考零点.纯音和超听觉式耳机用参考等效阈声压级 |
(Acoustics - Reference zero for the calibration of audiometric equipment - Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones) |
BS EN ISO 389-2-1995 |
声学.音响设备校正标准参考零点.纯音和插入式耳机用参考等效最低限度声压级 |
(Acoustics - Reference zero for the calibration of audiometric equipment - Reference equivalent threshold sound pressure levels for pure tones and insert earphones) |
BS EN ISO 389-7-1998 |
声学.音响设备校正标准参考零点.在自由领域和非扩散领域听力条件下听力参考阈值 |
(Acoustics - Reference zero for the calibration of audiometric equipment - Reference threshold of hearing under free-field and diffuse-field listening conditions) |
BS EN ISO 389-8-2004 |
声学.校正听力设备的基准零级.纯音和环绕耳机的基准等效阈声压级 |
|
BS EN ISO 3892-2001 |
金属材料的转化涂层.单位面积涂层质量的测定.重量分析法 |
(Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods) |
BS EN ISO 3915-1999 |
塑料.导电塑料电阻率的测量 |
(Plastics - Measurement of resistivity of conductive plastics) |
BS EN ISO 3927-2002 |
金属粉末(不包括硬质合金粉末).单轴向压缩时压缩性的测定 |
(Metallic powders, excluding powders for hardmetals - Determination of compressbility in uniaxial compression) |
BS EN ISO 3946-1994 |
淀粉及其制品磷总含量的测定.分光光度法 |
(Starches and derived products - Determination of total phosphorus content - Spectrometric method) |
BS EN ISO 3947-1994 |
天然或加工淀粉的脂肪总含量的测定 |
(Starches, native or modified - Determination of total fat content) |
BS EN ISO 3950-1997 |
牙科学.牙齿和口腔区的名称体系 |
(Dentistry - Designation system for teeth and areas of the oral cavity) |
BS EN ISO 3952-1-1995 |
运动图.第1部分:图符号 |
(Kinematic diagrams - Graphical symbols - Part 1) |
BS EN ISO 3952-2-1995 |
运动图.第2部分:图符号 |
(Kinematic diagrams - Graphical symbols - Part 2) |
BS EN ISO 3952-3-1995 |
运动图.第3部分:图符号 |
(Kinematic diagrams - Graphical symbols - Part 3) |
BS EN ISO 3952-4-1997 |
运动图.图符号.复杂机械及组件 |
(Kinematic diagrams - Graphical symbols - Miscellaneous mechanisms and their components) |
BS EN ISO 3953-1995 |
金属粉末.摇实密度的测定 |
(Metallic powders - Determination of tap density) |
BS EN ISO 3977-5-2002 |
燃气轮机.采购.石油和天然气工业用设施 |
(Gas turbines - Procurement - Applications for petroleum and natural gas industries) |
BS EN ISO 3993-1996 |
液化石油气和轻质烃类.密度或相对密度的测定.压力石油密度计法 |
(Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method) |
BS EN ISO 3994-2001 |
塑料软管.抽吸和排放含水物的螺旋热塑增强的热塑软管.规范 |
(Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification) |
BS EN ISO 4014-2001 |
六角头螺栓.产品等级A和B |
(Hexagon head bolts - Product grades A and B) |
BS EN ISO 4016-2001 |
六角头螺栓.产品等级C |
(Hexagon head bolts - Product grade C) |
BS EN ISO 4017-2001 |
六角头螺钉.产品等级A和B |
(Hexagon head screws - Product grades A and B) |
BS EN ISO 4018-2001 |
六角头螺钉.产品等级C |
(Hexagon head screws - Product grade C) |
BS EN ISO 4023-1992 |
蒸气用橡胶软管.试验方法 |
(Rubber hoses for steam - Test methods) |
BS EN ISO 4032-2001 |
六角头螺母.1型.产品等级A和B |
(Hexagon nuts, style 1. Product grades A and B) |
BS EN ISO 4033-2001 |
六角头螺母.2型.产品等级A和B |
(Hexagon nuts, style 2. Product grades A and B) |
BS EN ISO 4034-2001 |
六角头螺母.产品等级C |
(Hexagon nuts - Product grade C) |
BS EN ISO 4035-2001 |
六角头薄螺母(倒棱的).产品等级A和B |
(Hexagon thin nuts (chamfered) - Product grades A and B) |
BS EN ISO 4036-2001 |
六角头薄螺母(倒棱的).产品等级B |
(Hexagon thin nuts (unchamfered) - Product grade B) |
BS EN ISO 4042-2000 |
紧固件.电镀覆层 |
(Fasteners - Electroplated coatings) |
BS EN ISO 4044-1998 |
皮革.化学试验样品的制备 |
(Leather - Preparation of chemical test samples) |
BS EN ISO 4045-1998 |
皮革.pH值的测定 |
(Leather - Determination of pH) |
BS EN ISO 4047-1998 |
皮革.硫酸盐总灰分和硫酸盐水溶灰分的测定 |
(Leather - Determination of sulphated total ash and sulphated water-insoluble ash) |
BS EN ISO 4048-1998 |
皮革.二氯甲烷中溶解物质的测定 |
(Leather - Determination of matter soluble in dichloromethane) |
BS EN ISO 4049-2000 |
牙科学.高聚物基填充材料、复原材料和密封材料 |
(Dentistry - Polymer-based filling, restorative and luting materials) |
BS EN ISO 4063-2000 |
焊接及有关工艺.工艺和参考值的命名 |
(Welding and allied processes - Nomenclature of processes and reference numbers) |
BS EN ISO 4066-2000 |
建筑图纸.棒材表 |
(Construction drawings - Bar scheduling) |
BS EN ISO 407-2004 |
小型医用气瓶.针导轭式阀连接 |
|
BS EN ISO 4074-2002 |
天然乳胶阴茎套.要求和试验方法 |
(Natural latex rubber condoms - Requirements and test methods) |
BS EN ISO 4080-1992 |
橡胶和塑料软管及软管组件.透气性测定 |
(Rubber and plastics hoses and hose assemblies - Determination of permeability to gas) |
BS EN ISO 4119-1995 |
纸浆.悬浮液浓度的测定 |
(Pulps - Determination of stock concentration) |
BS EN ISO 4126-1-2004 |
防超压安全装置.安全阀 |
|
BS EN ISO 4126-2-2003 |
防超压安全装置.防爆板安全装置 |
(Safety devices for protection against excessive pressure - Bursting disc safety devices) |
BS EN ISO 4126-4-2004 |
过压保护安全设备.由伺服电动机控制的安全阀 |
|
BS EN ISO 4126-5-2004 |
过压保护安全设备.可控安全减压系统(CSPRS) |
|
BS EN ISO 4126-6-2004 |
过压保护安全装置.防爆板安全装置的应用、选择和安装 |
|
BS EN ISO 4126-6-2004 |
过压保护安全设备.防爆板安全装置的应用、选择和安装 |
|
BS EN ISO 4126-6-2004 |
过压保护安全装置.防爆板安全装置的应用、选择和安装 |
|
BS EN ISO 4126-7-2004 |
过压保护安全设备.通用数据 |
|
BS EN ISO 4135-2001 |
麻醉和呼吸设备.词汇 |
(Anaesthetic and respiratory equipment - Vocabulary) |
BS EN ISO 4142-2002 |
实验室玻璃器皿.试管 |
(Laboratory glassware - Test tubes) |
BS EN ISO 4157-1-1999 |
建筑制图.命名体制.建筑物和建筑物各部分 |
(Construction drawings - Designation systems - Buildings and parts of buildings) |
BS EN ISO 4157-2-1999 |
建筑制图.命名体制.房间名称与号码 |
(Construction drawings - Designation systems - Room names and numbers) |
BS EN ISO 4157-3-1999 |
建筑制图.命名体制.房间识别 |
(Construction drawings - Designation systems - Room identifiers) |
BS EN ISO 4165-2003 |
道路车辆.电气连接装置.双极连接 |
(Road vehicles - Electrical connections - Double-pole connection) |
BS EN ISO 4172-1997 |
技术制图.建筑制图.预制结构组装件制图 |
(Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures) |
BS EN ISO 4256-1998 |
液体石油产品.标准蒸气压力的测定.LPG法 |
(Liquid petroleum products - Determination of gauge vapour pressure - LPG method) |
BS EN ISO 4257-2001 |
石油及其产品的试验方法.液化石油气取样方法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Method of sampling) |
BS EN ISO 4259-1996 |
石油产品.与试验方法有关的精确数据的测定和应用 |
(Petroleum products - Determination and application of precision data in relation to methods of test) |
BS EN ISO 4263-1-2005 |
石油和相关产品.抗氧化油和流体的老化性测定.TOST试验.矿物油规程 |
|
BS EN ISO 4263-2-2003 |
石油及其相关制品.矿物油和流体的老化性的测定.TOST试验.HFC类液压液规程 |
(Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids) |
BS EN ISO 4264-1997 |
石油和石油产品的试验方法. 石油产品. 用四个可变化学方程式对中间蒸馏燃料的正十六烷指数的计算. |
(Methods of test for petroleum and its products - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation) |
BS EN ISO 4267-2-1990 |
石油和液体石油制品.油量的计算.第2部分:动态测量 |
(Petroleum and liquid petroleum products - Calculation of oil quantities - Dynamic measurements) |
BS EN ISO 4287-2000 |
几何产品规范(GPS).表面特征.轮廓法.术语、定义和表面特征参数 |
(Geometrical product specification (GPS) - Surface texture - Profile method - Terms, definitions and surface texture parameters) |
BS EN ISO 4288-1997 |
几何产品规范(GPS).表面特征.轮廓法:表面特征评估的规则和过程 |
(Geometric product specification (GPS) - Surface texture - Profile method: Rules and procedures for the assessment of surface texture) |
BS EN ISO 4320-1998 |
非离子表面活性剂.浊点指数的测定.容量法 |
(Non-ionic surface active agents - Determination of cloud point index - Volumetric method) |
BS EN ISO 4404-2-2003 |
石油和相关产品.难燃液压液抗腐蚀性的测定.不含水液体 |
(Petroleum and related products - Determination of the corrosion resistance fire-resistant hydraulic fluids - Non-aqueous fluids) |
BS EN ISO 445-1996 |
物料搬运用托盘.词汇 |
(Pallets for materials handling - Vocabulary) |
BS EN ISO 4490-2002 |
金属粉末.用校准漏斗(霍尔流量计)测定流动时间 |
(Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)) |
BS EN ISO 4491-2-1999 |
金属粉末.用还原法测定氧含量.氢还原时的质量损失(氢损失) |
(Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)) |
BS EN ISO 4516-2002 |
金属和其他无机镀层.维氏硬度计和努氏显微硬度试验机 |
(Metallic and other inorganic coatings - Vickers and Knoop microhardness tests) |
BS EN ISO 4518-1980 |
金属镀层.镀层厚度的测量.表面光法度轮廓仪法 |
(Metallic coatings - Measurement of coating thickness - Profilometric method) |
BS EN ISO 4524-3-1986 |
金属镀层.电镀金和金合金镀层的测试方法.孔隙度的电图试验 |
(Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Electrographic tests for porosity) |
BS EN ISO 4524-6-1989 |
金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定 |
(Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Determination of the presence of residual salts) |
BS EN ISO 4527-2003 |
金属覆层.自催化(无电)镍磷合金覆层.规范和试验方法 |
(Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods) |
BS EN ISO 4536-1986 |
金属基片上的金属覆层和无机覆层.盐滴腐蚀试验(SD试验) |
(Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test)) |
BS EN ISO 4538-1979 |
金属镀层.硫代乙酰胺腐蚀试验(TAA试验) |
(Metallic coatings - Thioacetamide corrosion test (TAA test)) |
BS EN ISO 4541-1979 |
金属和其它无机物涂层.涂膏密室耐腐蚀试验(CORR试验) |
(Metallic and other non-organic coatings - Corrodkote test (CORR test)) |
BS EN ISO 4543-1995 |
金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则 |
(Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions) |
BS EN ISO 4566-1995 |
舱内安装发动机的小型船舶.锥度为1:10螺旋浆轴端和尾轴毂 |
(Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper) |
BS EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空气中氧化热稳定性的测定.烘箱法 |
(Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method) |
BS EN ISO 4589-3-1996 |
塑料.通过氧指数测定其燃烧性.第3部分:高温试验 |
(Plastics - Determination of burning behaviour by oxygen index - Elevated temperature test) |
BS EN ISO 4590-2003 |
硬质泡沫塑料.开孔和闭孔泡沫的容积百分比的测定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells) |
BS EN ISO 4597-1-1998 |
塑料.环氧树脂的硬化剂和促进剂.名称与牌号 |
(Plastics - Hardeners and accelerators for epoxide resins - Designation) |
BS EN ISO 4599-1991 |
塑料.耐环境应力龟裂的测定.弯曲带材法 |
(Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method) |
BS EN ISO 4600-1993 |
塑料.环境应力碎裂的测定(ESC).球或钉压力法 |
(Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method) |
BS EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物树脂.室温下增塑剂吸收的测定 |
(Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature) |