标准号 |
中文名称 |
英文名称 |
| BS ISO 11807-1-2001 |
集成光学.词汇.基本术语和符号 |
Integrated optics - Vocabulary - Basic terms and symbols |
| BS ISO 11807-2-2001 |
集成光学.分类术语 |
Integrated optics - Vocabulary - Terms used in classification |
| BS ISO 11813-1999 |
牛奶和牛奶制品.锌含量的测定.火焰原子吸收光谱法 |
Milk and milk products - Determination of zinc content - Flame atomic absorption spectrometric method |
| BS ISO 11814-2002 |
奶粉.热处理强度的评定.高效液相色谱法 |
Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography |
| BS ISO 11819-1-2000 |
声学.路面对交通噪声影响的测量.旁路统计法 |
Acoustics. Measurement of the influence of road surfaces on traffic noise. Statistical pass-by method |
| BS ISO 11822-1997 |
信息和文献工作.目录信息交换用阿拉伯字母代码字符集的扩展 |
Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange |
| BS ISO 11833-1-1998 |
塑料.未增塑聚氯乙烯薄板.类型、尺寸和特征.厚度不低于1mm的薄板 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Tapes, dimensions and characteristics - Sheets of thickness not less than 1 mm |
| BS ISO 11833-2-1998 |
塑料.未增塑聚氯乙烯薄板.类型、尺寸和特征.厚度低于1mm的薄板 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Tapes, dimensions and characteristics - Sheets of thickness less than 1 mm |
| BS ISO 11841-1-2000 |
道路车辆和内燃发动机.过滤器词汇.过滤器和过滤器件定义 |
Road vehicles and internal combustion engines - Filter vocabulary - Definitions of filters and filter components |
| BS ISO 11841-2-2000 |
道路车辆和内燃发动机.过滤器词汇.过滤器和它们的件特性的定义 |
Road vehicles and internal combustion engines - Filter vocabulary - Definitions of characteristics of filters and their components |
| BS ISO 11843-1-2000 |
检测能力.术语和条件 |
Capability of detection - Terms and conditions |
| BS ISO 11843-2-2000 |
检测的能力.线性校准方法 |
Capability of detection - Methodology in the linear calibration case |
| BS ISO 11843-3-2003 |
检测能力.在无校准数据可采用情况下测定反应变量关键值的方法 |
(Capability of detection - Methodology for determination of the critical value for the response variable when no calibration data are used) |
| BS ISO 11846-1996 |
金属及其合金的腐蚀.经溶液热处理的铝合金的抗粒间腐蚀的测定 |
Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| BS ISO 11850-2003 |
林业机械.自行式机械的安全要求 |
(Machinery for forestry - Self-propelled machinery - Safety requirements) |
| BS ISO 11857-1999 |
纺织地板覆盖物.剥离抗性的测定 |
Textile floor coverings - Determination of resistance to delamination |
| BS ISO 11858-1999 |
铺地织物.接触泡沫易碎性的测定 |
Textile floor coverings - Determination of friability of attached foams |
| BS ISO 11859-1999 |
纺织品地板覆盖物.纯毛手编地毯规范 |
Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification |
| BS ISO 11860-1999 |
铺地织物.黄麻地毯背面纤维.规范 |
Textile floor coverings - Jute carpet backing fabric - Specification |
| BS ISO 11861-1999 |
纺织品地板覆盖物.椰壳粗纤维垫.类型和规范 |
Textile floor coverings - Coir mats - Types and specification |
| BS ISO 11866-1-1997 |
牛奶和奶制品.推测大肠杆菌的计算.第1部分:概略数量技术 |
Milk and milk products - Enumeration of presumptive Escherichia coli - Most probable number technique |
| BS ISO 11866-2-1997 |
奶和奶制品.大肠埃希杆菌的估算.第2部分:利用4-甲基馓形科(β) D-葡糖苷酸反应法 |
Milk and milk products - Enumeration of presumptive Escherichia coli - Most probable number technique using 4-methylumbelliferyl--D-glucuronide (MUG) |
| BS ISO 11866-3-1997 |
奶和奶制品.大肠埃希杆菌的估算.44℃时利用膜状物的菌落计数技术 |
Milk and milk products - Enumeration of presumptive Escherichia coli - Colony-count technique at 44 鳦 using membranes |
| BS ISO 11870-2000 |
牛奶和牛奶制品.脂肪含量的测定.油脂计法使用的一般指南 |
Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods |
| BS ISO 11873-2005 |
硬质合金.钴金属粉末中硫和碳含量的测定.红外线探测法 |
|
| BS ISO 11886-2002 |
建筑机械和设备.打桩机和工业规范 |
Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specifications |
| BS ISO 1189-1996 |
电影技术.在35mm电影胶片上除成条发行拷贝外的磁性声音记录的录音特性.规范 |
Cinematography - Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints - Specifications |
| BS ISO 11900-2-2001 |
压制用工具.球形闸门凸模固定板.小功率用C和D型 |
Tools for pressing - Ball-lock punch retainers - Types C and D, reduced for light duty |
| BS ISO 11900-3-2004 |
冲压工具.球锁冲头固定板.用于重负荷的E型固定板 |
|
| BS ISO 11901-2-2004 |
冲压工具.气压弹簧.附件的规范 |
|
| BS ISO 11907-1-1998 |
塑料.烟雾产生.灭火废液腐蚀性的测定.第1部分:导则 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Guidance |
| BS ISO 11907-2-1996 |
塑料制品.火焰冲击波的测定.第2部分:静态法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Static method |
| BS ISO 11907-3-1998 |
塑料.烟雾产生.灭火废液腐蚀性的测定.第3部分:使用移动式熔炉的动态分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Dynamic decomposition method using a travelling furnace |
| BS ISO 11907-4-1998 |
塑料.烟雾产生.灭火废液腐蚀性的测定.第4部分:使用热辐射式加热器的动态分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Dynamic decomposition method using a conical radiant heater |
| BS ISO 11922-1-1997 |
流体传输用热塑管.尺寸和公差.米制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Metric series |
| BS ISO 11922-2-1997 |
流体传输用热塑管.尺寸和公差.英制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Inch-based series |
| BS ISO 11925-3-1998 |
防火试验的反作用.经受火焰直接碰撞的建筑产品的可燃性.多个火焰源试验 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Multi-source test |
| BS ISO 11928-1-2000 |
缩微照相.图像COM记录器的质量控制.试验框架的特征 |
Micrographics - Quality control of graphic COM recorders - Characteristics of the test frames |
| BS ISO 11928-2-2000 |
显微制图学.图解的COM记录器的质量控制.质量标准和控制 |
Micrographics - Quality control of graphic COM recorders - Quality criteria and control |
| BS ISO 11929-1-2004 |
电离辐射测量用探测限值和判断阈的确定.基本原则和对不经过样品处理的计数测量的应用 |
|
| BS ISO 11929-2-2004 |
电离辐射测量用探测限值和判断阈的确定.基本原则和对经过样品处理的计数测量的应用 |
|
| BS ISO 11929-3-2004 |
电离辐射测量用探测限值和判断阈的确定.基本原则和对不经过样品处理的高分辨率γ能谱法计数测量的应用 |
|
| BS ISO 11929-4-2001 |
电离辐射测量的检测限值和决定范围的测定.在没有样品处理的影响时用模拟速率计的通过线性刻度测量的基本原理和应用 |
Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment |
| BS ISO 11929-5-2005 |
电离辐射测量探测限和判断阈的确定.基本原则及对放射材料累积过程中过滤器计数测量的应用 |
|
| BS ISO 11929-6-2005 |
电离辐射测量探测限和判断阈的确定.基本原则和对瞬态测量方法的应用 |
|
| BS ISO 11929-7-2005 |
电离辐射测量探测限和判断阈的确定.基本原则和一般应用 |
|
| BS ISO 11929-8-2004 |
电离辐射测量探测限和判断阈的确定.基本原则及对不受样品处理影响的光谱测量法演变的应用 |
|
| BS ISO 11933-3-1999 |
反应堆防护壳用组件.第3部分:光面门用传送系统、气闸室、双开门用传送系统和废物鼓的密封连接 |
Components for containment enclosures - Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums |
| BS ISO 11943-1999 |
液压流体力学.液体在自动流水线上颗粒计数系统.校验和批准方法 |
Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation |
| BS ISO 11944-1995 |
薄壁金属容器用圆体模. 最大容量为10 000 ml 的圆柱形罐和圆锥形罐的普通直径 |
Round general use light gauge metal containers - Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity |
| BS ISO 11948-1-1997 |
排尿装置.第1部分:整品检验 |
Urine-absorbing aids - Whole-product testing |
| BS ISO 11948-2-1998 |
小便吸收装置.第2部分:轻度不能自制与低压条件下短时间液体释放(泄漏)的测定 |
Urine-absorbing aids - Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure |
| BS ISO 11962-2002 |
缩微照相.带16 mm 和35 mm 成卷形式使用的冲击标记 |
Micrographics - Image mark (blip) used with 16 mm and 35 mm roll microfilm |
| BS ISO 11994-1998 |
起重机.有效性.词汇 |
Cranes - Availability - Vocabulary |
| BS ISO 11997-1-2005 |
色漆和清漆.耐周期性腐蚀的测定.湿(盐雾)/干燥/湿度影响试验 |
|
| BS ISO 12000-2000 |
塑料/橡胶.聚合物的分散及橡胶乳(天然的和合成的)的清析度.试验方法的定义和复审 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods |
| BS ISO 12003-1-2002 |
农林用拖拉机.窄轮距轮式拖拉机.前置倾翻保护装置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Front-mounted roll-over protective structures |
| BS ISO 12003-2-2002 |
农林用拖拉机.窄轮距轮式拖拉机.后置倾翻保护装置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Rear-mounted roll-over protective structures |
| BS ISO 12006-2-2001 |
建筑施工.施工作业的信息组织.信息分类的框架 |
|
| BS ISO 12006-2-2001 |
建筑施工.施工作业的信息组织.信息分类的框架 |
Building construction - Organization of information about construction works - Framework for classification of information |
| BS ISO 1202-2001 |
香精油.1,8桉树脑含量的测定 |
Essential oils - Determination of 1,8-cineole content |
| BS ISO 1203-1998 |
摄影技术.卷筒软片制版照相机.后窗位置 |
Photography - Roll film cameras - Back window location |
| BS ISO 12040-1997 |
印刷技术.印刷和印刷油墨.使用过滤氙弧灯评价色牢度 |
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light |
| BS ISO 12043-1995 |
滚动轴承.单列角面接触的滚子轴承.平挡圈和无活塞胀圈槽之间的突缘的倒棱尺寸 |
Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
| BS ISO 12044-1995 |
滚动轴承.单列角面接触的球轴承.外圈无测推力边的倒棱尺寸 |
Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
| BS ISO 12058-1-1997 |
塑料.使用落球粘度计测定粘度.斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Inclined-tube method |
| BS ISO 1206-2002 |
滚动轴承.尺寸系列为48,49和69的滚针轴承.边界尺寸和公差 |
Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances |
| BS ISO 12080-1-2000 |
干脱脂奶.维生素A含量的测定.比色法 |
Dried skimmed milk - Determination of vitamin A content - Colorimetric method |
| BS ISO 12080-2-2000 |
干脱脂奶.维生素A含量的测定.高性能液相色谱法 |
Dried skimmed milk - Determination of vitamin A content - Method using high-performance liquid chromatography |
| BS ISO 12081-1999 |
牛奶.钙含量的测定.滴定法 |
Milk - Determination of calcium content - Titrimetric method |
| BS ISO 12097-1-2003 |
道路车辆.安全气囊零部件.词汇 |
(Road vehicles - Airbag components - Vocabulary) |
| BS ISO 12097-3-2003 |
道路车辆.气囊零部件.充气机组件的检验 |
(Road vehicles - Airbag components - Testing of inflator assemblies) |
| BS ISO 12103-1-1998 |
道路车辆.过滤器评价尘土试验.第1部分:尘土试验方法 |
(Road vehicles - Test dust for filter evaluation - Arizona test dust) |
| BS ISO 12103-2-1998 |
道路车辆.过滤器评定用试验粉尘.氧化铝试验粉尘 |
Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
| BS ISO 12107-2003 |
金属材料.疲劳试验.数据的统计规划和分析 |
(Metallic materials - Fatigue testing - Statistical planning and analysis of data) |
| BS ISO 12108-2003 |
金属材料.疲劳试验.疲劳裂痕增长试验 |
(Metallic materials - Fatigue testing - Fatigue crack growth method) |
| BS ISO 12124-2001 |
声学.助听器真耳声学特性测量的过程 |
(Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids) |
| BS ISO 12128-2002 |
滑动轴承.润滑油孔、油槽油穴.轴衬的尺寸、类型、标记及其应用 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
| BS ISO 12129-2-1995 |
滑动轴承.轴、法兰和止推安装环的形状、位置和表面粗糙度的公差 |
Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
| BS ISO 12132-2000 |
滑动轴承.薄壁轴瓦质量评价.FMEA设计 |
Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
| BS ISO 12140-1999 |
农业机械.农用挂车和拖挂设备.牵引机构 |
(Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks) |
| BS ISO 12141-2002 |
固定污染源的排放.在低浓度时颗粒物质(灰尘)的质量浓度的测定.手工重量分析法 |
(Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method) |
| BS ISO 12142-2001 |
电子成像.验证光盘上存储的数据用介质误差监测和报告技术 |
Electronic imaging - Media error monitoring and reporting techniques for verification of stored data on optical digital data disks |
| BS ISO 12151-1-1999 |
液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
| BS ISO 12151-2-2003 |
液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头 |
(Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ?cone connector ends with O-rings) |
| BS ISO 12151-3-1999 |
液压流体力学和一般应用的连接件.软管配件.带ISO 6162法兰末端的软管配件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
| BS ISO 12156-2-1999 |
柴油.高频往复钻机(HFRR)用润滑剂性能评定.第2部分:极限值 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Limit |
| BS ISO 12164-1-2002 |
带法兰接触面的空心圆锥界面.刀柄.尺寸 |
Hollow taper interface with flange contact surface - Shanks - Dimensions |
| BS ISO 12164-2-2002 |
带法兰接触面的空心圆锥界面.接收器.尺寸 |
Hollow taper interface with flange contact surface - Receivers - Dimensions |
| BS ISO 12165-2000 |
铸模工具.压缩、注模和压铸模用件.术语和符号 |
Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols |
| BS ISO 1217-1997 |
容积式压缩机.验收试验 |
Displacement compressors - Acceptance tests |
| BS ISO 12171-2002 |
空间数据和信息传输系统.遥控指令.信道服务 |
(Space data and information transfer systems - Telecommand - Channel service) |
| BS ISO 12172-2003 |
空间数据和信息传输系统.遥控.数据路由服务 |
(Space data and information transfer systems - Telecommand - Data routing service) |
| BS ISO 12173-2003 |
空间数据和信息传输系统.遥控.指令执行程序 |
(Space data and information transfer systems - Telecommand - Command operation procedures) |
| BS ISO 12174-2003 |
空间数据和信息传输系统.遥控.数据管理业务的体系规范 |
(Space data and information transfer systems - Telecommand - Architectural specification for the data management service) |
| BS ISO 1219-2-1996 |
流体动力系统和件.图形符号和电路图.第2部分:电路图 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Circuit diagrams |
| BS ISO 12192-2002 |
纸和纸板.压缩强度.环压法 |
Paper and board - Compressive strength - Ring crush method |
| BS ISO 12197-1997 |
半圆键槽铣刀.尺寸 |
Woodruff keyseat cutters - Dimensions |
| BS ISO 12199-2002 |
用阿拉伯字母表示的多语种术语和字典编辑的数字的字母顺序 |
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet |
| BS ISO 12213-1-1998 |
天然气.压缩系数的计算.介绍和导则 |
Natural gas - Calculation of compression factors - Introduction and guidelines |
| BS ISO 12213-2-1998 |
天然气.压缩因数的计算.第2部分:摩尔代数运算分析 |
Natural gas - Calculation of compression factors - Calculation using a molar composition analysis |
| BS ISO 12213-3-1998 |
天然气.压缩系数的计算.实测物理性能计算 |
Natural gas - Calculation of compression factors - Calculation using measured physical properties |
| BS ISO 12214-2002 |
道路车辆.汽车手控装置的转向指示器 |
Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| BS ISO 12218-1997 |
制图技术.过程控制.胶印板标记 |
Graphic technology - Process control - Offset platemaking |
| BS ISO 1222-2003 |
摄影.三脚架连接件 |
(Photography - Tripod connections) |
| BS ISO 12222-2001 |
电影摄影.在16mm、35mm和65mm电影胶片上制造厂名的印制和潜在影象的识别.规范和尺寸 |
Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film - Specifications and dimensions |
| BS ISO 1223-1995 |
电影技术.供电视用电影胶片和幻灯片的画面.位置和尺寸 |
Cinematography - Picture areas for motion-picture films and slides for television - Position and dimensions |
| BS ISO 1223-2003 |
电影技术.电视用影片画面.位置和尺寸 |
(Cinematography - Picture areas for motion-picture films for television - Position and dimensions) |
| BS ISO 12231-1997 |
摄影.电子照相机.术语 |
Photography - Electronic still picture cameras - Terminology |
| BS ISO 12232-1998 |
摄影.电子静物摄影照相机.ISO速度测定 |
Photography - Electronic still-picture cameras - Determination of ISO speed |
| BS ISO 12233-2000 |
摄影.电子静物照相机.分辨率测量 |
Photography - Electronic still picture cameras - Resolution measurements |
| BS ISO 12234-1-2002 |
电子静态图像的成象.可装卸存储器.基本可装卸存储器模型 |
Electronic still-picture imaging - Removable memory - Basic removable-memory module |
| BS ISO 12234-2-2001 |
电子静止画面成像.可去除存储.TIFF/EP图像数据格式 |
Electronic still-picture imaging - Removable memory - TIFF/EP image data format |
| BS ISO 12238-2001 |
气压液动.方向控制阀门.转换时间的测量 |
(Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
| BS ISO 12240-1-1998 |
关节轴承.径向关节轴承 |
Spherical plain bearings - Radial spherical plain bearings |
| BS ISO 12240-2-1998 |
关节轴承.角面接触径向关节轴承 |
Spherical plain bearings - Angular contact radial spherical plain bearings |
| BS ISO 12240-3-1998 |
关节轴承.止推关节轴承 |
(Spherical plain bearings - Thrust spherical plain bearings) |
| BS ISO 12240-4-1998 |
关节轴承.径向关节轴承杆端 |
(Spherical plain bearings - Spherical plain bearing rod ends) |
| BS ISO 12256-2002 |
内十字形槽扳手.米制系列 |
(Drives, internal, cruciform, ribbed - Metric series) |
| BS ISO 12277-2000 |
航空航天.带镗孔标准系列浮动自锁定同轴槽铁.等级:1100 MPa(室温)/120℃、1100 MPa(室温)/235℃、1100 MPa( |
(Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications - 1100 MPa (at ambient temperature)/120 ℃, 1100 MPa (at ambient temperature)/235℃ and 1100 MPa () |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com