标准号 |
中文名称 |
英文名称 |
ISO 13555-2-2003 |
柴油发动机.柴油喷注设备动态计时的检验规程.第2部分:试验方法 |
(Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 2: Test method) |
ISO 13555-2-2003 |
柴油发动机.柴油喷注设备动态计时的检验规程.第2部分:试验方法 |
|
ISO 13555-3-2004 |
柴油发动机.柴油喷射装置动态计时的检验规程.第3部分:时间测量设备的检测 |
|
ISO 13556-1998 |
道路车辆.排气系统泄漏试验和设备规范的局限 |
Road vehicles - Localization of exhaust system leaks and equipment specifications |
ISO 13559-2002 |
黄油、发酵奶制品和鲜奶酪.污染微生物的计数.在30℃时的菌落计数法 |
Butter, fermented milks and fresh cheese - Enumeration of contaminating microorganisms - Colony-count technique at 30 鳦 |
ISO 13562-1-2000 |
工业用货车.第1部分:稳定性试验 |
Industrial variable-reach trucks - Part 1: Stability tests |
ISO 13562-2-2001 |
工业用货车.第2部分:装卸超过6米长货运集装箱的货车的额外稳定性试验 |
Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
ISO 13563-1-2001 |
单侧装载叉车.第1部分:稳定性试验 |
Single side loading fork-lift trucks - Part 1: Stability tests |
ISO 13563-2-2001 |
单侧装载叉车.第2部分:装卸6米或更长货运集装箱的货车的附加稳定性试验 |
Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
ISO 13565-1 Technical Corrigendum 1-1998 |
几何图形制品规范.表面纹理:轮廓法.表面分层功能特性.第1部分:筛选和一般测量条件.技术勘误1 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions; Technical Corrigendum 1 |
ISO 13565-1-1996 |
几何产品规范.表面特征:轮廓法.表面分层功能特性.第1部分:筛选和一般测量条件 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surface having stratified functional properties - Part 1: Filtering and general measurement conditions |
ISO 13565-2 Technical Corrigendum 1-1998 |
几何图形制品规范.表面特征:轮廓法.表面分层功能特性.第2部分:利用线性材料比率曲线表示的高度特征.技术勘误1 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve; Technical Corrigendum 1 |
ISO 13565-2-1996 |
几何图形制品规范.纺织表面:轮廓法.表面分层功能特性.第2部分:利用线材比例曲线表记述高特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve |
ISO 13565-3-1998 |
几何制品规范.表面特征:轮廓法.表面分层功能特性.第3部分:利用材料的概率曲线表描述高度特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve |
ISO 13567-1-1998 |
技术产品文件.计算机辅助设计(CAD)用层的编排和命名.第1部分:综述和原则 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles |
ISO 13567-2-1998 |
技术产品文件.计算机辅助设计(CAD)用层的编排和命名.第2部分:结构文件中使用的概念、格式和代码 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation |
ISO 13583-1-2000 |
离心铸造钢和合金制品.第1部分:一般试验和公差 |
Centrifugally cast steel and alloy products - Part 1: General testing and tolerances |
ISO 13583-2-2003 |
离心铸造钢及合金产品.第2部分:耐热材料 |
(Centrifugally cast steel and alloy products - Part 2: Heat resistant materials) |
ISO 13583-2-2003 |
离心铸造钢及合金产品.第2部分:耐热材料 |
|
ISO 13584-1-2001 |
工业自动化系统和一体化.部件图书馆.第1部分:总体和基本原则 |
Industrial automation systems and integration - Parts library - Part 1: Overview and fundamental principles |
ISO 13584-101-2003 |
工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议 |
(Industrial automation systems and integration - Parts library - Part 101: Geometrical view exchange protocol by parametric program) |
ISO 13584-101-2003 |
工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议 |
|
ISO 13584-20-1998 |
工业自动化系统和集成电路.零部件数据库.第20部分:逻辑源.表示式的逻辑模式 |
Industrial automation systems and integration - Parts library - Part 20: Logical resource; Logical model of expressions |
ISO 13584-24-2003 |
工业自动化系统和集成.零件库.第24部分:逻辑模型:供应商库的逻辑模型 |
(Industrial automation systems and integration - Parts library - Part 24: Logical resource: Logical model of supplier library) |
ISO 13584-24-2003 |
工业自动化系统和集成.零件库.第24部分:逻辑模型:供应商库的逻辑模型 |
|
ISO 13584-25-2004 |
工业自动化系统和集成.零件库.第25部分:逻辑源:带总值和确切含量的补充库用逻辑模型 |
|
ISO 13584-26-2000 |
工业自动系统和集成.零件库.第26部分:逻辑源.信息供货者识别 |
Industrial automation systems and integration - Parts library - Part 26: Logical resource: Information supplier identification |
ISO 13584-31-1999 |
工业自动化系统和集成.零件程序库.第31部分:工具实现源:几何编程接口 |
Industrial automation systems and integration - Parts library - Part 31: Implementation resources: Geometric programming interface |
ISO 13584-42 Technical Corrigendum 1-2003 |
工业自动化系统和集成.部件程序库.第42部分:描述方法:组构部件系列的方法.技术勘误1 |
Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring part families; Technical Corrigendum 1 |
ISO 13584-42 Technical Corrigendum 1-2003 |
工业自动化系统和集成.部件程序库.第42部分:描述方法:组构部件系列的方法.技术勘误1 |
|
ISO 13584-42 Technical Corrigendum 1-2003 |
工业自动化系统和集成.部件程序库.第42部分:描述方法:组构部件系列的方法.技术勘误1 |
|
ISO 13584-42-1998 |
工业自动化系统和集成.零件程序库.第42部分:描述方法:组构零件系列的方法 |
Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring part families |
ISO 13586 AMD 1-2003 |
塑料.断裂韧性的测定G)和K.线弹性断裂力学法.修改件1:含不连续增强纤维的注塑成形塑料的试验指南 |
(Plastics - Determination of fracture toughness (G and K); Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinous reinforcing fibres) |
ISO 13586-2000 |
塑料.断裂韧性的测定()和().线弹性断裂力学法 |
Plastics - Determination of fracture toughness (G and K) - Linear elastic fracture mechanics (LEFM) approach |
ISO 13589-1998 |
航空航天.有埋头孔的MJ螺纹自锁紧十二角螺母.分级:1100MPa(室温)/425℃、1100MPa(室温)/650℃、1210MPa(室温)/425℃、1210MPa(室温)/735℃、1550MPa(室温)/235℃、1550MPa(室温)/425℃、1550MPa(室温)/600℃.尺寸 |
Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 C, 1100 MPa (at ambient temperature)/650 C, 1210 MPa (at ambient temperature)/425 C, 1210 MPa (at ambient temperature)/730 |
ISO 13590-1997 |
小型飞机.船舶.结构和系统的安装要求 |
Small craft - Personal watercraft - Construction and system installation requirements |
ISO 13590-2003 |
小艇.个人艇.建造及系统安装要求 |
|
ISO 13591-1997 |
小型飞行器.舷外发动机用轻便型燃料系统 |
Small craft - Portable fuel systems for outboard motors |
ISO 13592-1998 |
小型飞机.汽油发动机用回火火焰控制 |
Small craft - Backfire flame control for petrol engines |
ISO 13595-2000 |
航空航天.涂覆或未涂覆的,金属材料制的,带MJ螺纹的,有自锁浮动螺帽的镶嵌件 |
Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions |
ISO 13596-2000 |
航空航天.涂覆或未涂覆的,金属材料制的,带MJ螺纹的,封闭型,自锁镶嵌件.尺寸 |
Aerospace - Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions |
ISO 13597-2000 |
航空航天.涂覆或未涂覆的,金属材料制的,带MJ螺纹的,开放型,自锁镶嵌件.尺寸 |
Aerospace - Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions |
ISO 13598-2000 |
航空航天.涂覆或未涂覆的,金属材料制的,封闭型的,缩减法兰的,带MJ螺纹的,自锁镶嵌件.尺寸 |
Aerospace - Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions |
ISO 13599-2000 |
航空航天.涂覆或未涂覆的,金属材料制的,带自由尺寸孔的镶嵌件.尺寸 |
Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions |
ISO 13600 Technical Corrigendum 1-1998 |
工业能源系统.基本概念,.技术勘误1 |
Technical energy systems - Basic concepts; Technical Corrigendum 1 |
ISO 13600-1997 |
工业能源体系.基本概念 |
Technical energy systems - Basic concepts |
ISO 13601-1998 |
技术能源系统.分析结构.能源产品供应和需求部分 |
Technical energy systems - Structure for analysis - Energyware supply and demand sectors |
ISO 13602-1-2002 |
技术能量系统.分析方法.第1部分:总则 |
Technical energy systems - Method for analysis - Part 1: General |
ISO 1361-1997 |
薄金属容器.开顶式二重卷边罐圆形罐头.内径 |
Light-gauge metal containers - Round open-top cans - Internal diameters |
ISO 13616-1997 |
银行业务及有关金融服务.国际银行帐号 |
Banking and related financial services - International Bank Account Number (IBAN) |
ISO 13616-2003 |
银行业务和相关金融服务.国际银行帐号(IBAN) |
(Banking and related financial services - International bank account number (IBAN)) |
ISO 13616-2003 |
银行业务和相关金融服务.国际银行帐号(IBAN) |
|
ISO 13617-2001 |
船只和船舶技术.船载焚烧炉.要求 |
Ships and marine technology - Shipboard incinerators - Requirements |
ISO 13623-2000 |
石油和天然气工业.管道运输系统 |
Petroleum and natural gas industries - Pipeline transportation systems |
ISO 13625-2002 |
石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings |
ISO 13626-2003 |
石油和天然气工业.钻井和生产设备.钻井和井检修结构 |
(Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures) |
ISO 13626-2003 |
石油和天然气工业.钻井和生产设备.钻井和井检修结构 |
|
ISO 13626-2003 |
石油和天然气工业.钻井和生产设备.钻井和井检修结构 |
|
ISO 13628-1-1999 |
石油和天然气工业.水下生产系统的设计和操作.第1部分:一般要求和推荐规程 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations |
ISO 13628-2-2000 |
石油和天然气工业.水下生产系统的设计和操作.第2部分:水下和船用软管系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications |
ISO 13628-3-2000 |
石油和天然气工业.水下生产系统的设计和操作.第3部分:贯通流动时间(TFL)系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowtime (TFL) systems |
ISO 13628-4-1999 |
石油和天然气工业.水下生产系统的设计和操作.第4部分:井口和主干设备 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment |
ISO 13628-5-2002 |
石油和天然气工业.水下采油系统的设计和操作.第5部分:水下缆线和管道 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals |
ISO 13628-6-2000 |
石油和天然气工业.海底生产系统的设计和操作.第6部分:海底生产控制系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems |
ISO 13628-8-2002 |
石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
ISO 13628-9-2000 |
石油和天然气工业.水下生产系统的设计和操作.第9部分:遥控设备干预系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tools (ROT) intervention systems |
ISO 13631-2002 |
石油和天然气工业.包装用往复式气体压缩机 |
Petroleum and natural gas industries - Packaged reciprocating gas compressors |
ISO 13638-1996 |
房屋建筑.密封胶.耐长期浸在水中粘结力的测定 |
Building construction - Sealants - Determination of resistance to prolonged exposure to water |
ISO 13640-1999 |
建筑物建造.接缝产品.试验衬底规范 |
Building construction - Jointing products - Specifications for test substrates |
ISO 13641-1-2003 |
水质.厌气菌的气体生成的抑制测定.第1部分:一般试验 |
(Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 1: General test) |
ISO 13641-1-2003 |
水质.厌气菌的气体生成的抑制测定.第1部分:一般试验 |
|
ISO 13641-2-2003 |
水质.厌气菌的气体生成的抑制测定.第2部分:低生物量浓度试验 |
(Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test at low biomass concentrations) |
ISO 13641-2-2003 |
水质.厌气菌的气体生成的抑制测定.第2部分:低生物量浓度试验 |
|
ISO 13653-1996 |
光学和光学仪器.普通光学试验方法.象场中有关光辉的测量 |
Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field |
ISO 13655-1996 |
制图技术.制图艺术成象用光谱测量和比色的计算 |
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images |
ISO 13656-2000 |
制版技术.工艺控制的比色分析法和反射光密度分析法的应用和印刷品和印样的评价 |
Graphic technology - Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs |
ISO 13658-2000 |
硫化锌浓缩物.锌含量的测定.氢氧化物沉淀法和EDTA滴定法 |
Zinc sulfide concentrates - Determination of zinc content - Hydroxide precipitation and EDTA titrimetric method |
ISO 13663-1995 |
压力焊接钢管.不完全薄膜检验用焊缝周围面积的超声波检验 |
Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
ISO 13664-1997 |
压力用无逢和焊接钢管.层状组织缺陷探测用管端的磁粉检验 |
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
ISO 13665-1997 |
压力用无逢和焊接钢管.表面缺陷探测用管身的磁粉检验 |
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections |
ISO 13666-1998 |
眼科光学.眼镜镜片.词汇 |
Ophthalmic optics - Spectacle lenses - Vocabulary |
ISO 13674-1-2003 |
道路车辆.沿中心驾驶的鉴定试验.第1部分:摇摆试验 |
(Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test ) |
ISO 13674-1-2003 |
道路车辆.沿中心驾驶的鉴定试验.第1部分:摇摆试验 |
|
ISO 13678-2000 |
石油和天然气工业.与套管和直管一起使用的螺纹复合物的评价和试验 |
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
ISO 13679-2002 |
石油和天然气工业.套管和管连接的测试程序 |
Petroleum and natural gas industries - Procedures for testing casing and tubing connections |
ISO 13680 Technical Corrigendum 2-2004 |
石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2 |
|
ISO 13680-2000 |
石油和天然气工业.装箱、铺设管道和连接器材用防腐的合金无缝管.技术交货条件 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
ISO 13681-1995 |
肉和肉制品.酵母菌和霉菌的计数.菌落计数技术 |
Meat and meat products - Enumeration of yeasts and moulds - Colony-count technique |
ISO 13683-1997 |
保健产品的消毒.用保健设备进行湿加热消毒的例行控制和证实要求 |
Sterilization of health care products - Requirements for validation and routine control of moist heat sterilization in health care facilities |
ISO 13685-1997 |
姜及其含油树脂.主要刺激素(辛辣味和生姜酚)的含量测定.使用高效液体色谱分析法 |
Ginger and its oleoresins - Determination of the main pungent components (gingerols and shogaols) - Method using high-performance liquid chromatography |
ISO 13686-1998 |
天然气.质量名称与符号 |
Natural gas - Quality designation |
ISO 13688-1998 |
防护服装.一般要求 |
Protective clothing - General requirements |
ISO 13689-2001 |
冷藏轻烃燃料.在含液化器的罐内的液体水平的测量.微波型水平量规 |
Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Microwave-type level gauge |
ISO 13690-1999 |
谷类作物,豆科作物和磨制产品.静态批量取样 |
Cereals, pulses and milled products - Sampling of static batches |
ISO 13691-2001 |
石油和天然气工业.特殊用途高速齿轮部件 |
Petroleum and natural gas industries - High-speed special-purpose gear units |
ISO 13694-2000 |
光学和光学设备.激光和有关激光的设备.激光束能量密度分布的试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution |
ISO 13695-2004 |
光学和光子学.激光及其相关设备.激光光谱特性的试验方法 |
|
ISO 13696-2002 |
光学和光学仪器.用光学件进行辐射散射的试验方法 |
Optics and optical Instruments - Test methods for radiation scattered by optical components |
ISO 137-1975 |
羊毛.纤维直径的测定.投影显微镜法 |
Wool; Determination of fibre diameter; Projection microscope method |
ISO 13702-1999 |
石油和天然气工业.近海生产设备着火和爆炸的控制和减弱.要求和导则 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines |
ISO 13703 Technical Corrigendum 1-2002 |
石油和天然气工业.近海生产平台上管道系统的设计和安装.技术勘误1 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms; Technical Corrigendum 1 |
ISO 13703-2000 |
石油和天然气工业.海上建设平台管道系统的设计和安装 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms |
ISO 13704 Technical Corrigendum 1-2004 |
石油和天然气工业.石油炼油厂内加热器管厚度的计算.技术勘误1 |
|
ISO 13704-2001 |
石油和天然气工业.炼油厂用加热器管厚度的计算 |
Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries |
ISO 13705-2001 |
石油和天然气工业.一般炼油厂的裂解炉 |
Petroleum and natural gas industries - Fired heaters for general refinery service |
ISO 13706-2000 |
石油和天然气工业.风冷热交换器 |
Petroleum and natural gas industries - Air-cooled heat exchangers |
ISO 13707-2000 |
石油和天然气工业.往复式压缩机 |
Petroleum and natural gas industries - Reciprocating compressors |
ISO 13709-2003 |
石油、石油化工和天然气工业用离心泵 |
(Centrifugal pumps for petroleum, petrochemical and natural gas industries) |
ISO 13709-2003 |
石油、石油化工和天然气工业用离心泵 |
|
ISO 13709-2003 |
石油、石油化工和天然气工业用离心泵 |
|
ISO 13710-2004 |
石油、石油化学和天然气工业.往复式变容真空泵 |
|
ISO 13710-2004 |
石油、石油化学和天然气工业.往复式变容真空泵 |
|
ISO 13715-2000 |
技术制图.未定义形状的边缘.词汇和说明 |
Technical drawings - Edges of undefined shape - Vocabulary and indications |
ISO 13716-1999 |
牙科学.可逆和不可逆水解胶体印模材料系统 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems |
ISO 13720-1995 |
肉和肉制品.假单胞菌spp.的计数 |
(Meat and meat products - Enumeration of Pseudomonas spp.) |
ISO 13722-1996 |
肉和肉制品.Brochothrix thermosphacta的计算.菌落计数技术 |
(Meat and meat products - Enumeration of Brochothrix thermosphacta - Colony-count technique) |
ISO 13726-1998 |
液压传动.内径250mm-500mm的16MPa(160bar)压实系列单杆液压缸 |
(Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions) |
ISO 13730-1996 |
肉和肉制品.总磷含量的测定.分光光度法 |
(Meat and meat products - Determination of total phosphorus content - Spectrometric method) |
ISO 13731-2001 |
热环境的人类工效学.词汇和符号 |
(Ergonomics of the thermal environment - Vocabulary and symbols) |
ISO 13734 Technical Corrigendum 1-1999 |
天然气.用做增味剂的有机硫化物.要求和试验方法.技术勘误1 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods; Technical Corrigendum 1) |