标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 527-5-1997 |
塑料.抗拉性能的测定.第5部分:单向增强纤维塑料复合材料的检验方法 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997); German version EN ISO 527-5:1997 |
| DIN EN ISO 5270-1999 |
纸浆.实验室纸张.物理性能的测定 |
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:1998); German version EN ISO 5270:1999 |
| DIN EN ISO 534-2005 |
纸和纸板.厚度、密度和比容的测定 |
|
| DIN EN ISO 534-2005 |
纸和纸板.厚度、密度和比容的测定 |
|
| DIN EN ISO 5349-1-2001 |
机械振动.人体手臂传输振动的测量和评价.第1部分:一般要求 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001); German version EN ISO 5349-1:2001 |
| DIN EN ISO 5349-2-2001 |
机械振动.人体手臂传输振动的测量和评价.第2部分:在工作场所测量用实用指南 |
Mechanical vibrations - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001); German version EN ISO 5349-2:2001 |
| DIN EN ISO 5350-1-1998 |
纤维材料.污物和碎片的估算.第1部分:实验室纸张的检验 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets (ISO 5350-1:1998); German version EN ISO 5350-1:1998 |
| DIN EN ISO 5350-2-1998 |
纤维材料.污物和碎片的估算.第2部分:弯曲状态下商品纤维素的检验 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998); German version EN ISO 5350-2:1998 |
| DIN EN ISO 5353-1999 |
农业和林业用土方机械,拖拉机和其它机械.座位指数点 |
Earth-moving machinery and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995); German version EN ISO 5353:1998 |
| DIN EN ISO 5356-1-2004 |
麻醉和呼吸设备.圆锥形接头.第1部分:锥体和锥套 |
|
| DIN EN ISO 536-1996 |
纸和纸板.克数的测定 |
Paper and board - Determination of grammage (ISO 536:1995); German version EN ISO 536:1996 |
| DIN EN ISO 5366-1-2004 |
麻醉和呼吸设备.气管造口插管.第1部分:成人用插管和接头 |
|
| DIN EN ISO 5377-1994 |
水解淀粉制品.还原能力和葡萄糖当量的测定.莱恩和埃诺常量滴定法 |
Starch hydrolysis products - Determination of reducing power and dextrose equivalent - Lane and Eynon constant titre method (ISO 5377:1981); German version EN ISO 5377:1994 |
| DIN EN ISO 5378-1994 |
淀粉及其制品.用克耶达法测定氮含量.分光光度法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Spectrophotometric method (ISO 5378:1978); German version EN ISO 5378:1994 |
| DIN EN ISO 5381-1994 |
水解淀粉制品.水含量的测定.改进的卡尔.费歇尔(Kas Figches)法 |
Starch hydrolysis products - Determination of water content - Modified Karl Fischer method (ISO 5381:1983); German version EN ISO 5381:1994 |
| DIN EN ISO 5399-1998 |
皮革.水溶解镁盐的测定.EDTA滴定分析法 |
Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method (ISO 5399:1984); German version EN ISO 5399:1998 |
| DIN EN ISO 542-1995 |
油料种子.取样 |
Oilseeds - Sampling (ISO 542:1990); German version EN ISO 542:1995 |
| DIN EN ISO 5436-1-2000 |
几何产品规范(GPS).表面特征:外形方法.测量标准.第1部分:材料测量 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000); German version EN ISO 5436-1:2000 |
| DIN EN ISO 5436-2-2002 |
产品几何量技术规范(GPS).表面结构:轮廓法.测量标准.第2部分:软件测量标准 |
Geometrical Products Specifications (GPS) - Surface texture: Profile method; Measurements standards - Part 2: Software measurement standards (ISO 5436-2:2001); German version EN ISO 5436-2:2001 |
| DIN EN ISO 544-2004 |
焊接消耗品.焊接填充金属的技术交货条件.产品类型、尺寸、公差和标记 |
(Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and marking (ISO 544:2003); German version EN ISO 544:2003) |
| DIN EN ISO 544-2004 |
焊接消耗品.焊接填充金属的技术交货条件.产品类型、尺寸、公差和标记 |
|
| DIN EN ISO 5456-4-2002 |
技术制图.投影法.第4部分:中央投影法 |
Technical drawings - Projection methods - Part 4: Central projection (ISO 5456-4:1996); German version EN ISO 5456-4:2001 |
| DIN EN ISO 5457-1999 |
技术产品文献.绘图纸的尺寸和布局 |
Technical product documentation - Sizes and layout of drawing sheets (ISO 5457:1999); German version EN ISO 5457:1999 |
| DIN EN ISO 5458-1999 |
几何产品规范(GPS).几何公差.定位公差 |
Geometrical product specification (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998); German version EN ISO 5458:1998 |
| DIN EN ISO 5470-1-1999 |
橡胶或塑料涂层的织物.耐磨牢度的测定.第1部分:泰伯磨损检验器 |
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999); German version EN ISO 5470-1:1999 |
| DIN EN ISO 5508-1995 |
动植物脂肪和油.脂肪酸甲酯的气一液相色谱分析法 |
Animal and vegetable fats and oils - Analysis by gas chromatography of methyl esters (ISO 5508:1990); German version EN ISO 5508:1995 |
| DIN EN ISO 5509-2001 |
动物和植物脂肪和油.脂肪酸甲酯的制备(ISO 5509:2000) |
Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids (ISO 5509:2000); German version EN ISO 5509:2000 |
| DIN EN ISO 5534-2004 |
干酪和融化干酪.总固形物含量的测定(参照法) |
|
| DIN EN ISO 5537-2004 |
奶粉.水含量的测定(参照法) |
|
| DIN EN ISO 5555-2002 |
动植物脂肪和油.取样 |
Animal and vegetable fats and oils - Sampling (ISO 5555:2001); German version EN ISO 5555:2001 |
| DIN EN ISO 5659-1-1999 |
塑料.烟雾产生.第1部分:检验光密度的导则 |
Plastics - Smoke generation - Part 1: Guidance on optical-density testing (ISO 5659-1:1996); German version EN ISO 5659-1:1999 |
| DIN EN ISO 5659-2-1998 |
塑料.烟雾产生.第2部分:用单箱试验法测定光密度 |
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:1994, including Technical Corrigendum 1:1997); German version EN ISO 5659-2:1998 |
| DIN EN ISO 5667-13-1998 |
水质.取样.第13部分:从水处理及水制备设备中淤泥取样指引 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997); German version EN ISO 5667-13:1997 |
| DIN EN ISO 5667-13-1998 |
水质.取样.第13部分:从水处理及水制备设备中淤泥取样指引 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997); German version EN ISO 5667-13:1997 |
| DIN EN ISO 5667-16-1999 |
水质.取样.第16部分:取样和进行生物检验的方法的指南 |
Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998); German version EN ISO 5667-16:1998 |
| DIN EN ISO 5667-19-2004 |
水质.取样.第19部分:海底沉积物的抽样指南 |
|
| DIN EN ISO 5667-3-1996 |
水质.取样.第3部分:样品的封存和处理说明 |
Water quality, sampling - Part 3: Guidance on the preservation and handling of samples (ISO 5667-3:1994); German version EN ISO 5667-3:1995 |
| DIN EN ISO 5667-3-2004 |
水质.采样.第3部分:水样保存和处理方法指南 |
|
| DIN EN ISO 5674-2004 |
农林业用拖拉机和机械.动力输出轴护罩.强度和磨损试验及验收标准 |
|
| DIN EN ISO 5764-2002 |
牛奶.冰点的测定.热敏电阻冰点测定法(参考法) |
Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2002); German version EN ISO 5764:2002 |
| DIN EN ISO 5771-1996 |
输送无水氨用橡胶软管和软管组件.规范 |
Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996 |
| DIN EN ISO 5774-2000 |
压缩空气用织物增强塑料软管.规范 |
Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 |
| DIN EN ISO 5778-2000 |
造船技术.防风雨的小型钢舱盖 |
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); German version EN ISO 5778:2000 |
| DIN EN ISO 580-2005 |
塑料管和管道系统.喷射铸造热塑性配件.热效应直观评估法 |
|
| DIN EN ISO 580-2005 |
塑料管和管道系统.喷射铸造热塑性配件.热效应直观评估法 |
|
| DIN EN ISO 5826-2003 |
电阻焊设备.变压器.适用于所有变压器的通用规范 |
(Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003) |
| DIN EN ISO 5828-2001 |
电阻焊设备.连接水冷耳的接线柱用的辅助连接电缆.尺寸和特征 |
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001); German version EN ISO 5828:2001 |
| DIN EN ISO 583-1-2000 |
带有织物胎壳的传送带.覆盖物的厚度和总厚度.第1部分:试验方法 |
Conveyor belts with a textile carcass - Total thickness and thickness of covers of elements - Part 1: Method of test (ISO 583-1:1999); German version EN ISO 583-1:1999 |
| DIN EN ISO 584-1998 |
塑料.未饱和的聚酯树脂.80℃时的反应性测定(常规方法) |
Plastics - Unsaturated polyester resins - Determination of reactivity at 80 C (conventional method) (ISO 584:1982); German version EN ISO 584:1997 |
| DIN EN ISO 585-2000 |
塑料.不增塑的乙酸纤维素.含水量的测定 |
Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999 |
| DIN EN ISO 591-1-2001 |
涂料用二氧化钛颜料.第1部分:规范和试验方法 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO 591-1:2000); German version EN ISO 591-1:2000 |
| DIN EN ISO 595-2-1994 |
医用可重复使用的全玻璃或金属-玻璃注射器.第2部分:设计.性能要求和试验 |
Reusable all-glass or metal-and-glass syringes for medical use - Part 2: Design, performance requirements and tests (ISO 595-2:1987); German version EN ISO 595-2:1994 |
| DIN EN ISO 5961-1995 |
水的质量.镉的测定.用火焰原子吸收光谱法测定镉 |
Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994); German version EN ISO 5961:1995 |
| DIN EN ISO 5981-1998 |
橡胶或塑料涂层的织物.抗复合弯曲剪切和磨损的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:1997); German version EN ISO 5981:1997 |
| DIN EN ISO 5983-1-2005 |
动物饲料.氮含量的测定和粗蛋白质的计算.第1部分:基尔达斯法 |
|
| DIN EN ISO 5983-2-2005 |
动物饲料.氮含量的测定和粗蛋白质的计算.第2部分:块分解/蒸汽蒸馏法 |
|
| DIN EN ISO 5999-2004 |
软质泡沫聚合材料.不包括地毯衬底的承重用聚氨基甲酸酯泡沫体.规范 |
|
| DIN EN ISO 60-2000 |
塑料.可由专用漏斗注入的材料表观密度的测定 |
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); German version EN ISO 60:1999 |
| DIN EN ISO 6009-1994 |
一次性使用的皮下注射针.识别用色标 |
Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992); German version EN ISO 6009:1994 |
| DIN EN ISO 604-1997 |
塑料.压缩性能的测定 |
Plastics - Determination of compressive properties (ISO 604:1993); German version EN ISO 604:1996 |
| DIN EN ISO 6042-2000 |
造船.防风雨的单扇钢门 |
Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998); German version EN ISO 6042:2000 |
| DIN EN ISO 61-2000 |
塑料.不能由专用漏斗注入的模压材料表观密度的测定 |
Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); German version EN ISO 61:1999 |
| DIN EN ISO 6103-2000 |
粘合的磨料制品.验收试验可允许的磨轮不平衡 |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing (ISO 6103:1999); German version EN ISO 6103:1999 |
| DIN EN ISO 6103-2005 |
粘合磨料产品.交货时砂轮的可允许不平衡性.静态试验 |
|
| DIN EN ISO 613-2002 |
船舶和航海技术.磁罗盘、罗盘座和方位读数装置.B级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B (ISO 613:2000); German version EN ISO 613:2001 |
| DIN EN ISO 6157-2-2004 |
紧固件.表面缺陷.第2部分:螺母 |
|
| DIN EN ISO 6158-2004 |
金属涂层.工程用铬电镀层 |
|
| DIN EN ISO 6165-2002 |
土方机械.基本类型.词汇 |
Earth-moving machinery - Basic types - Vocabulary (ISO 6165:2001); German version EN ISO 6165:2002 |
| DIN EN ISO 6179-2001 |
硫化或热塑橡胶.橡胶薄板和橡胶涂层织物.挥发性液体渗透速度的测定(重力测定技术) |
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000 |
| DIN EN ISO 6185-1-2002 |
充气艇.第1部分:发动机最大额定功率为4.5kW的动力艇 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001 |
| DIN EN ISO 6185-2-2002 |
充气艇.第2部分:发动机最大额定功率为4.5kW到(并包括)15 kW的动力艇 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001 |
| DIN EN ISO 6185-3-2002 |
充气艇.第2部分:发动机最大额定功率为15kW及更大的动力艇 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001 |
| DIN EN ISO 6186-1998 |
塑料.松散性测定 |
Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998 |
| DIN EN ISO 62-1999 |
塑料.吸水性的测定 |
Plastics - Determination of water absorption (ISO 62:1999); German version EN ISO 62:1999 |
| DIN EN ISO 6222-1999 |
水质.可培养微生物的计数.通过对营养琼脂培养基培养的计群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999); German version EN ISO 6222:1999 |
| DIN EN ISO 6224-1997 |
一般目的用水时使用的带织物加固内衬的橡胶软管.规范 |
(Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997) |
| DIN EN ISO 6245-2003 |
石油产品.灰分的测定 |
(Petroleum products - Determination of ash (ISO 6245:2001); German version EN ISO 6245:2002) |
| DIN EN ISO 6246-1998 |
石油产品.易挥发和中等蒸馏燃料的蒸发残渣.顶吹法 |
(Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995); German version EN ISO 6246:1996) |
| DIN EN ISO 6251-1998 |
液化石油气.对铜的腐蚀性.铜片试验 |
(Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996); German version EN ISO 6251:1998) |
| DIN EN ISO 6252-1998 |
塑料.环境应力破裂(ESC)测定.持久应力试验 |
(Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997) |
| DIN EN ISO 6259-1-2002 |
热塑管.拉伸特性的测定.第1部分:通用试验方法 |
(Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001) |
| DIN EN ISO 6270-1-2002 |
涂料和清漆.耐湿度的测定.第1部分:连续冷凝作用 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998); German version EN ISO 6270-1:2001 |
| DIN EN ISO 6272-1-2004 |
色漆和清漆.快速变形(耐冲击)试验.第1部分:大区域压头落锤试验 |
|
| DIN EN ISO 6272-1994 |
色漆和清漆.落锤试验 |
Paints and varnishes - Falling-weight test (ISO 6272:1993); German version EN ISO 6272:1994 |
| DIN EN ISO 6320-2000 |
动植物脂肪和油.折射指数的测定 |
Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000); German version EN ISO 6320:2000 |
| DIN EN ISO 6321-2002 |
动植物脂肪和油.开口毛细管中熔点(裂解点)测定 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002); German version EN ISO 6321:2002 |
| DIN EN ISO 6326-3-1998 |
天燃气.硫化物的测定.第3部分:用电势分析法对硫化氢,硫醇式硫和硫化羰式硫的测定 |
Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989); German version EN ISO 6326-3:1997 |
| DIN EN ISO 6326-5-1998 |
天燃气.硫化物的测定.第5部分:林格聂尔(lingener)燃烧法 |
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989); German version EN ISO 6326-5:1997 |
| DIN EN ISO 6330-2001 |
纺织品.织物试验的家庭洗涤和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000); German version EN ISO 6330:2000 |
| DIN EN ISO 6341-1996 |
水质.抑制大型Daphnia magna Straus(枝角目,甲壳纲)活动性的测定.剧毒试验 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:1996); German version EN ISO 6341:1996 |
| DIN EN ISO 6346-1996 |
ISO集装箱.编码.识别和标记 |
Freight containers - Coding, identification and marking (ISO 6346:1995); German version EN ISO 6346:1995 |
| DIN EN ISO 6360-1-2004 |
牙医学.旋转器械的数字编码系统.第1部分:一般特点 |
|
| DIN EN ISO 6360-2-2005 |
牙科学.旋转器械用数字编码体系.第2部分:形状 |
|
| DIN EN ISO 6360-4-2004 |
牙科学.旋转器械数字编码体系.第4部分:金刚石器械的特性 |
|
| DIN EN ISO 6360-6-2004 |
牙科学.旋转器械数字编码体系.第6部分:磨削器械特性 |
|
| DIN EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第1部分:裤型撕裂法 |
|
| DIN EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第2部分:埃尔曼多法 |
|
| DIN EN ISO 6385-2004 |
工作系统设计的人类工效原则 |
|
| DIN EN ISO 6401-2005 |
塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 |
|
| DIN EN ISO 6402-1-2003 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和挤压材料.第1部分:命名系统和规范基础 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
| DIN EN ISO 6402-2-1999 |
塑料.耐冲击丙烯腈/苯乙烯模制和挤压材料(ASA,AES,ACS),丁二烯改型材料除外.第2部分:试验试样的制备和特性的测定 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 640 |
| DIN EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙烯(ACS)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
| DIN EN ISO 6416-2005 |
水文测量.超声波(声波)法测量流量 |
|
| DIN EN ISO 642-2000 |
钢.端头淬硬性试验(乔米尼(Jominy)试验) |
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); German version EN ISO 642:1999 |
| DIN EN ISO 6427-1998 |
塑料.通过有机溶剂测定可萃取成份(标准法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998 |
| DIN EN ISO 643 Berichtigung 1-2004 |
DIN EN ISO 643-2003的勘误 |
|
| DIN EN ISO 643-2003 |
钢.表面粒度的缩微照相测定 |
(Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003) |
| DIN EN ISO 6468-1997 |
水质.选出的有机氯杀虫剂,多氯联苯和氯苯的测定.在液-液萃取后的气相色谱法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996 |
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6506-1-1999 |
金属材料.布氏硬度试验.第1部分:试验方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999); German version EN ISO 6506-1:1999 |
| DIN EN ISO 6506-2 Bb.1-1999 |
金属材料.布氏硬度试验.第2部分:硬度试验机的校验.依据验证结果及为试验机与冲头设计所作修正 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the plunger |
| DIN EN ISO 6506-2-1999 |
金属材料.布氏硬度试验.第2部分:硬度试验机械的校准与标定 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of hardness testing machines (ISO 6506-2:1999); German version EN ISO 6506-2:1999 |
| DIN EN ISO 6506-3 Bb.1-1999 |
金属材料.布氏硬度试验.第3部分:标准试块校验.标准试块设计样品 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks; example of design of reference blocks |
| DIN EN ISO 6506-3-1999 |
金属材料.布氏硬度试验.第3部分:标准试块的校验 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999); German version EN ISO 6506-3:1999 |
| DIN EN ISO 6507-1-1998 |
金属材料.维氏硬度试验.第1部分:试验方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 |
| DIN EN ISO 6507-2 Bb.1-1998 |
金属材料.维氏硬度检验.第2部分:试验机械检验.检验和试验机械结构的建议及打压印章 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines; recommendations according to the verification and for the performance of the testing machine and the plunger |
| DIN EN ISO 6507-2-1998 |
金属材料.维氏硬度试验.第2部分:试验机械的校准 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines (ISO 6507-2:1997); German version EN ISO 6507-2:1997 |
| DIN EN ISO 6507-3 Bb.1-1998 |
金属材料.维氏硬度检验.第3部分:硬度对比板的校准.使用硬度对比板举例 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com