标准号 |
中文名称 |
英文名称 |
ISO 4469-1981 |
木材.径向和切向收缩率的测定 |
(Wood; Determination of radial and tangential shrinkage) |
ISO 447-1984 |
机床.控制装置的操作方位 |
(Machine tools; Direction of operation of controls) |
ISO 4470-1981 |
锯材.批量锯材平均水份含量的测定 |
(Sawn timber; Determination of the average moisture content of a lot) |
ISO 4471-1982 |
木材.为测定物理和机械性能用从均匀生长林区取样样品树和原木 |
(Wood; Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands) |
ISO 4472-1983 |
针叶和阔叶树锯材.运输包装 |
(Coniferous and broadleaved sawn timber; Transportation packages) |
ISO 4473-1988 |
针叶和宽叶树锯材.可见缺陷.分级 |
(Coniferous and broadleaved tree sawlogs; visible defects; classification) |
ISO 4474-1989 |
针叶树和阔叶树锯材.显著缺陷.术语和定义 |
(Coniferous and broadleaved tree sawlogs; visible defects; terms and definitions) |
ISO 4475-1989 |
针叶树和阔叶树锯材.明显缺陷.测量 |
(Coniferous and broadleaved tree sawlogs; visible defects; measurement) |
ISO 4476-1983 |
针叶和阔叶树锯材.尺寸.词汇.三种语言版 |
(Coniferous and broadleaved sawlogs; Sizes; Vocabulary Trilingual edition) |
ISO 4480-1983 |
针叶树原木锯材.尺寸测量和体积的测定 |
(Coniferous sawlogs; Measurement of sizes and determination of volume) |
ISO 4481-1977 |
刀具和盘碟类餐具命名.三种语言版 |
(Cutlery and flatware; Nomenclature Trilingual edition) |
ISO 4482-1979 |
石棉水泥管道.敷设指南 |
(Asbestos-cement pipelines; Guide for laying) |
ISO 4483-1979 |
石棉水泥管道.现场压力试验 |
Asbestos-cement pipelines; Field pressure testing |
ISO 4486-1985 |
石棉水泥通风管道和配件.尺寸和特性 |
Asbestos-cement ventilation ducts and fittings; Dimensions and characteristics |
ISO 4488-1979 |
承受推力载荷的石棉水泥导管,护管和接口 |
(Asbestos-cement pipes and joints for thrust-boring and pipe jacking) |
ISO 4489-1978 |
烧结硬质合金.取样和试验 |
(Sintered hardmetals; Sampling and testing) |
ISO 449-1997 |
船舶和航海技术.A级磁罗经、罗盘座和方位判读装置 |
(Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A) |
ISO 4490-2001 |
金属粉末.用校准漏斗(霍尔流量计)测定流动时间 |
(Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)) |
ISO 4491-1-1989 |
金属粉末.用还原法测定氧含量.第1部分:通则 |
(Metallic powders; determination of oxygen content by reduction methods; part 1: general guidelines) |
ISO 4491-2-1997 |
金属粉末.用还原法测定氧含量.第2部分:还原时氢的质量的损失(氢损失) |
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) |
ISO 4491-3-1997 |
金属粉末.用还原法测定氧含量.第3部分:氢可还原的氧量 |
Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen |
ISO 4491-4-1989 |
金属粉末.用还原法测定氧含量.第4部分:用还原萃取法测定氧的总含量 |
Metallic powders; determination of oxygen content by reduction methods; part 4: total oxygen by reduction-extraction |
ISO 4492-1985 |
金属粉末(不包括硬质合金粉末).压实与烧结的尺寸变化的测定 |
(Metallic powders, excluding powders for hardmetals; Determination of dimensional changes associated with compacting and sintering) |
ISO 4496-1978 |
金属粉末.铁、铜、锡和青铜粉末中酸不溶物含量的测定 |
(Metallic powders; Determination of acid insoluble content in iron, copper, tin and bronze powders) |
ISO 4497-1983 |
金属粉末.用干筛法测定粒度 |
(Metallic powders; Determination of particle size by dry sieving) |
ISO 4498-1-1990 |
不包括硬质合金的烧结金属材料.表观硬度的测定.第1部分:截面硬度基本均匀的材料 |
(Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness) |
ISO 4498-2-1981 |
不包括硬质合金的烧结金属材料.表观硬度的测定.第2部分:表面渗碳或渗碳和氮的表面硬化黑色金属材料 |
Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen |
ISO 4499-1978 |
硬质合金.显微的金相测定 |
(Hardmetals; Metallographic determination of microstructure) |
ISO 45-1990 |
飞机.压力加油连接装置 |
Aircraft; pressure refuelling connections |
ISO 4501-1978 |
硬质合金.钛含量的测定.过氧化物光度法 |
(Hardmetals; Determination of titanium; Photometric peroxide method) |
ISO 4503-1978 |
硬质合金.用X射线荧光测定金属素的含量.熔化法 |
(Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method) |
ISO 4505-1978 |
硬质合金.孔隙率和游离碳的金相测定 |
(Hardmetals; Metallographic determination of porosity and uncombined carbon) |
ISO 4506-1979 |
硬质合金.压缩试验 |
(Hardmetals; Compression test) |
ISO 4507-2000 |
烧结铁类材料.渗碳或碳氮共渗.用微型硬度测试法测定和验证表面硬化深度 |
(Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test) |
ISO 4510-1-1987 |
土方机械.修理工具.第1部分:一般维修和调整工具 |
(Earth-moving machinery; Service tools; Part 1 : Common maintenance and adjustment tools) |
ISO 4510-2-1996 |
土方机械.修理工具.第1部分:机动拔具和推进器 |
Earth-moving machinery - Service tools - Part 2: Mechanical pullers and pushers |
ISO 4512-2000 |
石油和液化石油制品.测量存储箱液位用设备.手工法 |
Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods |
ISO 4513-1978 |
道路车辆.能见度.对司机眼睛位置椭圆视野圈确定方法 |
(Road vehicles; Visibility; Method for establishment of eyellipses for driver`s eye location) |
ISO 4513-2003 |
道路车辆.能见度.驾驶员眼睛位置的眼睛活动范围的确定方法 |
|
ISO 4516-2002 |
金属和其他无机覆盖层.维氏和努氏显微硬度检验 |
(Metallic and other inorganic coatings - Vickers and Knoop microhardness tests) |
ISO 4518-1980 |
金属镀层.镀层厚度的测量.表面光法度轮廓仪法 |
Metallic coatings; Measurement of coating thickness; Profilometric method |
ISO 4519-1980 |
电镀金属层和有关的精加工.计数检查的取样程序 |
Electrodeposited metallic coatings and related finishes; Sampling procedures for inspection by attributes |
ISO 4520-1981 |
电镀锌和镉镀层上的铬酸盐转化镀层 |
Chromate conversion coatings on electroplated zinc and cadmium coatings |
ISO 4521-1985 |
金属镀层.工程技术用的银及银合金电镀层 |
Metallic coatings; Electrodeposited silver and silver alloy coatings for engineering purposes |
ISO 4522-1-1985 |
金属镀层.银及银合金电镀层的试验方法.第1部分:镀层厚度的测定 |
Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 1 : Determination of coating thickness |
ISO 4522-2-1985 |
金属镀层.银及银合金电镀层的试验方法.第2部分:粘着力试验 |
Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 2 : Adhesion tests |
ISO 4522-3-1988 |
金属镀层.电镀银和银合金镀层的测试方法.第3部分:残留盐类的测定 |
Metallic coatings; test methods for electrodeposited silver and silver alloy coatings; part 3: determination of the presence of residual salts |
ISO 4523-1985 |
金属镀层.工程技术用的金及其合金电镀层 |
Metallic coatings; Electrodeposited gold and gold alloy coatings for engineering purposes |
ISO 4524-1-1985 |
金属镀层.金及金合金电镀层的试验方法.第1部分:镀层厚度的测定 |
(Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 1 : Determination of coating thickness) |
ISO 4524-2-2000 |
金属镀层.金及金合金电镀层的试验方法.第2部分:混合流动气体(MFG)环境试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests |
ISO 4524-3-1985 |
金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验 |
Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 3 : Electrographic tests for porosity |
ISO 4524-4-1985 |
金属镀层.金及金合金电镀层的试验方法.第4部分:金含量的测定 |
Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 4 : Determination of gold content |
ISO 4524-5-1985 |
金属镀层.金及金合金镀层的试验方法.第5部分:粘着力试验 |
Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 5 : Adhesion tests |
ISO 4524-6-1988 |
金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定 |
Metallic coatings; test methods for electrodeposited gold and gold alloy coatings; part 6: determination of the presence of residual salts |
ISO 4525-2003 |
金属镀层.塑料材料上的镍加铬电镀层 |
Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials |
ISO 4525-2003 |
金属镀层.塑料材料上的镍加铬电镀层 |
|
ISO 4526-1984 |
金属镀层.工程技术用镍电镀层 |
Metallic coatings; Electroplated coatings of nickel for engineering purposes |
ISO 4526-2004 |
金属覆盖层.工程用镍电镀层 |
|
ISO 4527-1987 |
自动催化的镍磷镀层.规范和试验方法 |
Autocatalytic nickel-phosphorus coatings; Specification and test methods |
ISO 4527-2003 |
金属覆层.自动催化(无电)的镍磷合金覆层.规范和试验方法 |
(Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods) |
ISO 4527-2003 |
金属覆层.自动催化(无电)的镍磷合金覆层.规范和试验方法 |
|
ISO 4528-2000 |
上釉和瓷釉精整.物品上釉和涂以瓷釉面积的试验方法的选择 |
(Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles) |
ISO 4530-1983 |
釉瓷和搪瓷上釉加工的制品.耐热性的测定 |
(Vitreous and porcelain enamelled manufactured articles; Determination of resistance to heat) |
ISO 4531-1-1998 |
釉层和搪瓷.与食品接触的搪瓷器皿铅和镉的释放.第1部分:试验方法 |
(Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 1: Method of test) |
ISO 4531-2-1998 |
釉层和搪瓷.与食品接触的搪瓷器皿铅和镉的释放.第2部分:可允许的极限值 |
(Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 2: Permissible limits) |
ISO 4532-1991 |
釉瓷和搪瓷.瓷层抗冲击性的测定.冲击枪试验 |
(Vitreous and porcelain enamels; determination of the resistance of enamelled articles to impact; pistol test) |
ISO 4533-1983 |
釉瓷和搪瓷.耐洗涤纺织品用热洗涤剂溶液性能测定 |
(Vitreous and porcelain enamels; Determination of resistance to hot detergent solutions used for washing textiles) |
ISO 4534-1980 |
釉瓷和搪瓷.流动性的测定.熔化液流试验 |
(Vitreous and porcelain enamels; Determination of fluidity behaviour; Fusion flow test) |
ISO 4535-1983 |
釉瓷和搪瓷.抗洗涤纺织品用热洗涤剂溶液性能测定用仪器 |
(Vitreous and porcelain enamels; Apparatus for determination of resistance to hot detergent solutions used for washing textiles) |
ISO 4536-1985 |
金属基质上的金属和无机物涂层.盐液滴腐蚀试验(SD试验) |
(Metallic and non-organic coatings on metallic substrates; Saline droplets corrosion test (SD test)) |
ISO 4538-1978 |
金属镀层.硫代乙酰胺腐蚀试验(TAA试验) |
(Metallic coatings; Thioacetamide corrosion test (TAA test)) |
ISO 4539-1980 |
铬电镀层.电解腐蚀试验(EC试验) |
(Electrodeposited chromium coatings; Electrolytic corrosion testing (EC test)) |
ISO 4541-1978 |
金属镀层和其它无机物涂层.涂膏密室耐腐蚀试验(CORR试验) |
(Metallic and other non-organic coatings; Corrodkote corrosion test (CORR test)) |
ISO 4543-1981 |
金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则 |
(Metallic and other non-organic coatings; General rules for corrosion tests applicable for storage conditions) |
ISO 4545-1993 |
金属材料.硬度试验.努氏试验 |
(Metallic materials; hardness test; Knoop test) |
ISO 4546-1993 |
金属材料.硬度试验.努氏硬度试验机的检定 |
(Metallic materials; hardness test; verification of Knoop hardness testing machines) |
ISO 4547-1993 |
金属材料.硬度试验.努氏硬度试验机用标准硬度块的检定 |
(Metallic materials; hardness test; calibration of standardized blocks to be used for Knoop hardness testing machines) |
ISO 4548-1-1997 |
内燃机满流式润滑油滤清器试验法.第1部分:压力降/流量特性 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 1: Differential pressure/flow characteristics) |
ISO 4548-11-1997 |
内燃机满流式润滑油滤清器试验法.第11部分:具有自洁作用的滤清器 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters) |
ISO 4548-12-2000 |
内燃机满流式润滑油过滤器试验法.第12部分:使用微粒计数的过滤有效性和污染留滞容量 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity) |
ISO 4548-2-1997 |
内燃机满流式润滑油滤清器试验法.第2部分:旁路阀特性件 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 2: Element by-pass valve characteristics) |
ISO 4548-3-1997 |
内燃机满流式润滑油滤清器试验法.第3部分:耐高压差和耐高温性能 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 3: Resistance to high differential pressure and to elevated temperature) |
ISO 4548-4-1997 |
内燃机满流式润滑油过滤器试验法.第4部分:原颗粒滞留率、滞留时间和累积率(重量法) |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)) |
ISO 4548-5-1990 |
内燃机满流式润滑油滤清器试验法.第5部分:冷起动模拟和液压脉冲耐久性试验 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines; part 5: cold start simulation and hydraulic pulse durability test) |
ISO 4548-6 Technical Corrigendum 1-1990 |
内燃机满流式润滑油滤清器试验法.第6部分:静压破裂试验.技术勘误表1 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines; part 6: static burst pressure test; technical corrigendum 1) |
ISO 4548-6-1985 |
内燃机满流式润滑油滤清器试验法.第6部分:静态爆裂压力试验 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines; Part 6 : Static burst pressure test) |
ISO 4548-7-1990 |
内燃机满流式润滑油滤清器试验法.第7部分:振动疲劳试验 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines; part 7: vibration fatigue test) |
ISO 4548-9-1995 |
内燃机满流式润滑油滤清器试验法.第9部分:进油口和出油口用防泄漏阀试验 |
(Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests) |
ISO 4551-1987 |
铁合金.取样和筛析 |
(Ferroalloys; Sampling and sieve analysis) |
ISO 4552-1-1987 |
铁合金.取样和化学分析用的样品制备.第1部分:铬铁、硅铬铁、硅铁、硅锰铁和锰铁 |
(Ferroalloys; Sampling and sample preparation for chemical analysis; Part 1 : Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese) |
ISO 4552-2-1987 |
铁合金.取样和化学分析用的样品制备.第2部分:钛铁、钼铁、钨铁、钽铁,铌铁和钒铁 |
(Ferroalloys; Sampling and sample preparation for chemical analysis; Part 2 : Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium) |
ISO 4559-1978 |
造船.快艇导向装置.互换性尺寸 |
(Shipbuilding; Tracks for yachts; Interchangeability dimensions) |
ISO 456-1973 |
表面活性剂.肥皂分析.游离苛性碱的测定 |
(Surface active agents; Analysis of soaps; Determination of free caustic alkali) |
ISO 4566-1992 |
舱内安装发动机的小型船舶.锥度为1:10螺旋浆轴端和尾轴毂 |
(Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper) |
ISO 4567-1978 |
造船.快艇.废水排放阀件 |
(Shipbuilding; Yachts; Waste water fittings) |
ISO 4568-1986 |
造船.海船.起锚机和起锚绞盘 |
(Shipbuilding; Sea-going vessels; Windlasses and anchor capstans) |
ISO 457-1983 |
肥皂.氯化物含量的测定.滴定法 |
(Soaps; Determination of chloride content; Titrimetric method) |
ISO 4570-2002 |
轮胎气门嘴螺纹 |
(Tyre valve threads) |
ISO 4571-1981 |
锰矿石和锰精矿.钾和钠含量的测定.火焰原子发射光谱测定法 |
(Manganese ores and concentrates; Determination of potassium and sodium content; Flame atomic emission spectrometric method) |
ISO 4574-1978 |
塑料.一般用途的聚氯乙烯(PVC)树脂.热增塑剂吸收的测定 |
(Plastics; PVC resins for general use; Determination of hot plasticizer absorption) |
ISO 4575-1985 |
塑料.聚氯乙烯糊料.使用塞维(Severs)流速计测定表观粘度 |
(Plastics; Polyvinyl chloride pastes; Determination of apparent viscosity using the Severs rheometer) |
ISO 4576-1996 |
塑料.聚合物散体.筛子剩余物的测定.(粗粒和凝固物含量) |
(Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)) |
ISO 4577-1983 |
塑料.聚丙烯和丙烯共聚物.空气中氧化热稳定性的测定.烘箱法 |
(Plastics; Polypropylene and propylene- copolymers; Determination of thermal oxidative stability in air; Oven method) |
ISO 4578-1997 |
粘合剂.高强度粘合抗剥离性的测定.浮辊法 |
(Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating-roller method) |
ISO 458-1-1985 |
塑料.柔性材料扭转韧性的测定.第1部分:一般方法 |
(Plastics; Determination of stiffness in torsion of flexible materials; Part 1 : General method) |
ISO 458-2-1985 |
塑料.可弯曲材料的扭曲刚度的测定.第2部分:氯乙烯的均聚物和共聚物的增塑化合物应用 |
(Plastics; Determination of stiffness in torsion of flexible materials; Part 2 : Application to plasticized compounds of homopolymers and copolymers of vinyl chloride) |
ISO 4581-1994 |
塑料.苯乙烯/ 丙烯腈共聚物.剩余的丙烯腈单体含量的测定.气相色谱法 |
(Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method) |
ISO 4582-1998 |
塑料.暴露于玻璃下的日光照射、自然风化和人工光照后的颜色变化和性质改变的测定 |
(Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources) |
ISO 4586-1 AMD 3-2002 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第1部分:分类和规范.修改件3:耐光性 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications; Amendment 3: Lightfastness) |
ISO 4586-1-1997 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第1部分:分类和规范 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications) |
ISO 4586-1-2004 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第1部分:分类和规范 |
|
ISO 4586-2 AMD 3-2002 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第2部分:性能测定.修改件3:耐光性 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 3: Lightfastness) |
ISO 4586-2 AMD 4-2000 |
高压装饰板.热固性树脂制薄板.第2部分:性能测定.修改件4:表面耐磨性 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 4: Resistance to surface wear) |
ISO 4586-2 AMD 5-2002 |
高压装饰层压板(HPL).热固性树脂制作的薄板.第2部分:性能测定.修改件5:耐擦伤性 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 5: Resistance to scratching) |
ISO 4586-2 AMD 6-2003 |
高压装饰层压板(HPL).热固性树脂制作的薄板.第2部分:性能测定.修改件6:耐湿热性 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 6: Resistance to wet heat) |
ISO 4586-2 AMD 7-2002 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第2部分:性能测定.修改件7:耐染色性和除尘度 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 7: Stain resistance and cleanability) |
ISO 4586-2 AMD 8-2002 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第2部分:性能测定.修改件8:尺寸稳定性 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 8: Dimensional stability) |
ISO 4586-2-1997 |
高压装饰板.热固性树脂制薄板.第2部分:性能测定 |
(High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties) |
ISO 4586-2-2004 |
装饰用高压叠层板材(HPL).热固性树脂制薄板.第2部分:性能测定 |
|
ISO 4587-2003 |
粘合剂.刚性对刚性的连接组件拉伸搭接剪切强度的测定 |
(Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies) |