标准号 |
中文名称 |
英文名称 |
ISO 9019-1995 |
证券.证书标准号 |
Securities - Numbering of certificates |
ISO 902-1976 |
金属铝生产用氧化铝.休止角的测定 |
Aluminium oxide primarily used for the production of aluminium; Measurement of the angle of repose |
ISO 9020 Technical Corrigendum 1-1996 |
色漆和清漆用粘合剂.胺类树脂的自由甲醛含量的测定.技术勘误表1 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method; Technical Corrigendum 1 |
ISO 9020-1994 |
色漆和清漆用粘合剂.胺类树脂的自由甲醛含量的测定 |
Binders for paints and varnishes; determination of free-formaldehyde content of amino resins; sodium sulfite titrimetric method |
ISO 9021-1988 |
摩托车.操纵机构.型式.位置和功能 |
Motorcycles; Controls; Types, positions and functions |
ISO 9022-1-1994 |
光学和光学仪器.环境试验方法.第1部分:试验的范围及定义 |
Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing |
ISO 9022-10-1998 |
光学和光学仪器.环境试验方法.第10部分:复正弦波振动与干热或干冷 |
Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold |
ISO 9022-11-1994 |
光学和光学仪器.环境试验方法.第11部分:霉菌生长 |
Optics and optical instruments - Environmental test methods - Part 11: Mould growth |
ISO 9022-12-1994 |
光学和光学仪器.环境试验方法.第12部分:污染 |
Optics and optical instruments - Environmental test methods - Part 12: Contamination |
ISO 9022-13-1998 |
光学和光学仪器.环境试验方法.第13部分:组合冲击、碰撞或自由降落与干热或干冷 |
Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall and dry heat or cold |
ISO 9022-14-1994 |
光学和光学仪器.环境试验方法.第14部分:露水、霜及冰 |
Optics and optical instruments - Environmental test methods - Part 14: Dew, hoarfrost, ice |
ISO 9022-15-1998 |
光学和光学仪器.环境试验方法.第15部分:复合数控宽频随机振动与干热或干冷 |
Optics and optical instruments - Environmental test methods - Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold |
ISO 9022-16-1998 |
光学和光学仪器.环境试验方法.第16部分:组合振动或稳定状态的加速度与干热或干冷 |
Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration and dry heat or cold |
ISO 9022-17-1994 |
光学和光学仪器.环境试验方法.第17部分:太阳辐射混合污染 |
Optics and optical instruments - Environmental test methods - Part 17: Combined contamination, solar radiation |
ISO 9022-18-1994 |
光学和光学仪器.环境试验方法.第18部分:混合湿热及低内压力 |
Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure |
ISO 9022-19-1994 |
光学和光学仪器.环境试验方法.第19部分:与正弦波振动或随机振动组合的温度循环 |
Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration |
ISO 9022-2-2002 |
光学和光学仪器.环境试验方法.第2部分:冷、热和潮气 |
Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity |
ISO 9022-20-1997 |
光学和光学仪器.环境试验方法.第20部分:含有硫化氢或二氧化硫的湿空气 |
Optics and optical instruments - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide |
ISO 9022-21-1998 |
光学和光学仪器.环境试验方法.第21部分:组合低压和室温或干热 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat |
ISO 9022-3-1998 |
光学和光学仪器.环境试验方法.第3部分:机械应力 |
Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress |
ISO 9022-4-2002 |
光学和光学仪器.环境试验方法.第4部分:盐雾 |
Optics and optical instruments - Environmental test methods - Part 4: Salt mist |
ISO 9022-5-1994 |
光学和光学仪器.环境试验方法.第5部分:组合冷、低压 |
Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure |
ISO 9022-6-1994 |
光学和光学仪器.环境试验方法.第6部分:尘埃 |
Optics and optical instruments - Environmental test methods - Part 6: Dust |
ISO 9022-7 Technical Corrigendum 1-2001 |
光学和光学仪器.环境试验方法.第7部分:降雨.技术勘误1 |
Optics and optical instruments - Environmental test method - Part 7: Drip, rain; Technical Corrigendum 1 |
ISO 9022-7-1994 |
光学和光学仪器.环境试验方法.第7部分:降雨 |
Optics and optical instruments - Environmental test methods - Part 7: Drip, rain |
ISO 9022-8-1994 |
光学和光学仪器.环境试验方法.第8部分:高压、低压及浸渍 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion |
ISO 9022-9-1994 |
光学和光学仪器.环境试验方法.第9部分:太阳辐射 |
Optics and optical instruments - Environmental test methods - Part 9: Solar radiation |
ISO 9026-1991 |
粗橡胶或硫化化合物.生坯强度测定 |
Raw rubber of unvulcanized compounds; determination of green strength |
ISO 9028-1989 |
橡胶.用酸煮法溶解 |
Rubber; dissolution by acid digestion |
ISO 9029-1990 |
原油.水分测定.蒸馏法 |
Crude petroleum; determination of water; distillation method |
ISO 903-1976 |
金属铝生产用氧化铝.未夯实密度的测定 |
Aluminium oxide primarily used for the production of aluminium; Determination of untamped density |
ISO 9030-1990 |
原油.水分和沉淀物测定.离心法 |
Crude petroleum; determination of water and sediment; centrifuge method |
ISO 9031-1987 |
空中货运设备.成组货件(ULD S)的运输系统.用图形表示的符号 |
Air cargo equipment; Handling systems for unit load devices (ULDs); Symbols for pictorial representation |
ISO 9033-1989 |
铝矿石.散料含水量的测定 |
Aluminium ores; determination of the moisture content of bulk material |
ISO 9034-1987 |
热轧宽扁结构钢.尺寸和形状公差 |
Hot-rolled structural steel wide flats; Tolerances on dimensions and shape |
ISO 9035-1989 |
铁矿石.酸溶铁含量的测定.滴定分析法 |
Iron ores; determination of acid-soluble iron(II) content; titrimetric method |
ISO 9036-1987 |
信息处理.信息交换用的7位编码阿拉伯字符集 |
Information processing; Arabic 7-bit coded character set for information interchange |
ISO 9038-2002 |
液体持续可燃性的试验 |
Test for sustained combustibility of liquids |
ISO 9039 Technical Corrigendum 1-2004 |
光学和光学仪器.光学系统的质量评定.畸变的测定.技术勘误1 |
|
ISO 9039-1994 |
光学及光学仪器.光学系统的质量评定.挠曲测定 |
Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion |
ISO 904-1976 |
工业用盐酸.总酸度的测定.滴定法 |
Hydrochloric acid for industrial use; Determination of total acidity; Titrimetric method |
ISO 9042-1988 |
钢.人工点计数,用点格统计评定组成的体积百分率 |
Steels; manual point counting method for statistically estimating the volume fraction of a constituent with a point grid |
ISO 9043-1991 |
机动脚踏两用车.惯性矩测量方法 |
Mopeds; measurement method for moments of inertia |
ISO 9044-1999 |
工业用金属丝织物.技术要求和试验 |
Industrial woven wire cloth - Technical requirements and testing |
ISO 9045-1990 |
工业用网筛和筛分.词汇 |
Industrial screens and screening; vocabulary |
ISO 9047-2001 |
房屋建筑.连接件.变温下的密封胶粘合性能的测定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures |
ISO 9048-1987 |
建筑结构.连接件.使用标准化仪器测定密封料可挤压性 |
Building construction; Jointing products; Determination of extrudability of sealants using standardized apparatus |
ISO 905-1976 |
工业用盐酸.用测定盐酸密度计算其浓度 |
Hydrochloric acid for industrial use; Evaluation of hydrochloric acid concentration by measurement of density |
ISO 9050-1990 |
建筑用玻璃.玻璃透光性的测定.透阳光性.太阳能透过度以及紫外线透过度的测定和有关上光模 |
Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors |
ISO 9050-2003 |
建筑玻璃.光透率、日光直射率、太阳能总透射率及紫外线透射率及有关光泽系数的测定 |
(Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors) |
ISO 9050-2003 |
建筑玻璃.光透率、日光直射率、太阳能总透射率及紫外线透射率及有关光泽系数的测定 |
|
ISO 9051-2001 |
建筑用玻璃.建筑用装了玻璃的组件包括耐火透明玻璃或者耐火半透明玻璃 |
Glass in building - Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building |
ISO 9052-1-1989 |
声学.动力刚性的测定.第1部分:住房中用于浮置地板下的材料 |
Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings |
ISO 9053-1991 |
声学.声学应用材料.空气流动阻力的测定 |
Acoustics; materials for acoustical applications; determination of airflow resistance |
ISO 9054-1990 |
泡沫塑料.自结皮高密度材料的试验方法 |
Cellular plastics, rigid; test methods for self-skinned, high-density materials |
ISO 9055-1988 |
炼铝用碳素材料.电极沥青.用氧弹法测定硫含量 |
Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method |
ISO 9056-1990 |
玻璃容器.防偷窃精加工系列.尺寸 |
Glass containers; series of pilferproof finish; dimensions |
ISO 9057-1991 |
玻璃容器.加压液体用28mm瓶口.尺寸 |
Glass containers; 28 mm tamper-evident finish for pressurized liquids; dimensions |
ISO 9058-1992 |
玻璃容器.公差 |
Glass containers; tolerances |
ISO 9059-1990 |
太阳能.与基准太阳热量计比对野外太阳热量计 |
Solar energy; calibration of field pyrheliometers by comparison to a reference pyrheliometer |
ISO 906-1976 |
工业用盐酸.硫酸盐含量的测定.硫酸钡重量法 |
Hydrochloric acid for industrial use; Determination of sulphate content; Barium sulphate gravimetric method |
ISO 9060-1990 |
太阳能.对半球面太阳能辐射和太阳直接辐射测量仪的分类和规范 |
Solar energy; specification and classification of instruments for measuring hemispherical solar and direct solar radiation |
ISO 9061-1993 |
酸级和陶瓷级氟石.铁含量的测定.1,10菲绕啉光谱法 |
Acid-grade and ceramic-grade fluorspar; determination of iron content; 1,10-phenanthroline spectrometric method |
ISO 9062-1992 |
酸级和陶瓷级氟石.锰含量测定.高碘酸盐光谱分析法 |
Acid-grade and ceramic-grade fluorspar; determination of manganese content; periodate spectrometric method |
ISO 9069-1988 |
信息处理.SGML支援设备.SGML文献交换格式(SDIF) |
Information processing; SGML support facilities; SGML document interchange format (SDIF) |
ISO 907-1976 |
工业用盐酸.硫酸盐灰分的测定.重量法 |
Hydrochloric acid for industrial use; Determination of sulphated ash; Gravimetric method |
ISO 9073-1-1989 |
纺织品.非织造品的试验方法.第1部分:单位面积质量的测定 |
Textiles; test methods for nonwovens; part 1: determination of mass per unit area |
ISO 9073-10-2003 |
纺织品.非织造布的试验方法.第10部分:干燥状态下纤维戎和其它粒子生成物 |
(Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state) |
ISO 9073-10-2003 |
纺织品.非织造布的试验方法.第10部分:干燥状态下纤维戎和其它粒子生成物 |
|
ISO 9073-10-2003 |
纺织品.非织造布的试验方法.第10部分:干燥状态下纤维戎和其它粒子生成物 |
|
ISO 9073-11-2002 |
纺织品.非织造品的试验方法.第11部分:径流量 |
Textiles - Test methods for nonwovens - Part 11: Run-off |
ISO 9073-12-2002 |
纺织品.非织造品的试验方法.第12部分:吸收需求量 |
Textiles - Test methods for nonwovens - Part 12: Demand absorbency |
ISO 9073-2 Technical Corrigendum 1-1998 |
纺织品.无纺织品的试验方法.第2部分:厚度的测定.技术勘误1 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness; Technical Corrigendum 1 |
ISO 9073-2-1995 |
纺织品.非织造品的试验方法.第2部分:厚度的测定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness |
ISO 9073-3-1989 |
纺织品.非织造品的试验方法.第3部分:抗张强度和伸张度的测定 |
Textiles; test methods for nonwovens; part 3: determination of tensile strength and elongation |
ISO 9073-4-1997 |
纺织品.非织造品的检验方法.第4部分:抗撕裂的测定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance |
ISO 9073-6-2000 |
纺织品.非织造品的试验方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption |
ISO 9073-6-2000 |
纺织品.非织造品的试验方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption |
ISO 9073-7-1995 |
纺织品.非织造品的试验方法.第7部分:抗弯强度的测定 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length |
ISO 9073-8-1995 |
纺织品.非织造品的试验方法.第8部分:液体渗透时间的测定(模拟尿) |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) |
ISO 9073-9-1995 |
纺织品.非织造品的试验方法.第9部分:悬垂系数的测定 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient |
ISO 908-1980 |
工业用盐酸.氧化或还原物质含量的测定.滴定法 |
Hydrochloric acid for industrial use; Determination of oxidizing or reducing substances content; Titrimetric method |
ISO 9080-2003 |
塑料管道和导管系统.用外推法测定热塑性塑料管材的长期静液压强度 |
(Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation) |
ISO 9080-2003 |
塑料管道和导管系统.用外推法测定热塑性塑料管材的长期静液压强度 |
|
ISO 9083-2001 |
正齿轮和斜齿轮的负载能力的计算.船用齿轮的应用 |
Calculation of load capacity of spur and helical gears - Application to marine gears |
ISO 9084-2000 |
正齿轮和斜齿轮承载能力计算.快速齿轮和类似要求齿轮的应用 |
Calculation of load capacity of spur and helical gears - Application to high speed gears and gears of similar requirements |
ISO 9085-2002 |
正齿轮和斜齿轮的荷载能力计算.工业齿轮应用 |
Calculation of load capacity of spur and helical gears - Application for industrial gears |
ISO 9086-1-1987 |
木材.物理和机械试验方法.词汇.第1部分:一般概念和宏观组织.三种语言版 |
Wood; Methods of physical and mechanical testing; Vocabulary; Part 1 : General concepts and macrostructure Trilingual edition |
ISO 9087-1998 |
木材.轴向负荷下钉子和螺钉固着力的测定 |
Wood - Determination of nail and screw holding power under axial load application |
ISO 9088-1997 |
铝生产用碳素材料.预烙阳极的阴极块.用比重法对二甲苯密度的测定 |
Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method |
ISO 9089-1989 |
海上建筑物.移动式近海设备.锚用绞车 |
Marine structures; mobile offshore units; anchor winches |
ISO 9090-1989 |
气焊以及类似的处理过程中设备的气密特性 |
Gas tightness of equipment for gas welding and allied processes |
ISO 9091-1-1991 |
轻质碳氢化合物制冷液.船上球型容器的校准.第1部分:立体摄影测绘 |
Refrigerated light-hydrocarbon fluids; calibration of spherical tanks in ships; part 1: stereo-photogrammetry |
ISO 9091-2-1992 |
轻质碳氢化合物制冷液.船上球型容器的校准.第2部分:三角测量 |
Refrigerated light hydrocarbon fluids; calibration of spherical tanks in ships; part 2: triangulation measurement |
ISO 9092-1988 |
纺织品.非织造品.定义 |
Textiles; nonwovens; definition |
ISO 9093-1-1994 |
小船.船底阀和整个船配件.第1部分:金属的 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic |
ISO 9093-2-2002 |
小艇.通海旋塞及贯穿艇体配件.第1部分:非金属的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic |
ISO 9094-1-2003 |
小艇.防火.第2部分:艇体长最高达15m的小艇 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m |
ISO 9094-1-2003 |
小艇.防火.第2部分:艇体长最高达15m的小艇 |
|
ISO 9094-2-2002 |
小艇.防火.第2部分:艇体长超过15m的小艇 |
Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m |
ISO 9095-1990 |
钢管.鉴别材料用连续符号标志和颜色码 |
Steel tubes; continuous character marking and colour coding for material identification |
ISO 9096-2003 |
固定源排放.颗粒物质量浓度的手动测定 |
Stationary source emissions - Manual determination of mass concentration of particulate matter |
ISO 9096-2003 |
固定源排放.颗粒物质量浓度的手动测定 |
|
ISO 9097-1991 |
小型船舶.电扇 |
Small craft; electric fans |
ISO 9098-1-1994 |
家用双层床的安全要求和试验.第1部分:安全要求 |
Bunk beds for domestic use - Safety requirements and tests - Part 1: Safety requirements |
ISO 9098-2-1994 |
家用双层床的安全要求和试验.第2部分:试验方法 |
Bunk beds for domestic use - Safety requirements and tests - Part 2: Test methods |
ISO 9099-1987 |
船舶干燥的储备室的空气调节和通风.设计条件和计算基础 |
Air-conditioning and ventilation of dry provision rooms on board ships; Design conditions and basis of calculations |
ISO 91-1-1992 |
石油测量数值表.第1部分:根据参比温度15℃和60°F编制的表 |
Petroleum measurement tables; part 1: tables based on reference temperatures of 15 C and 60 F |
ISO 91-2-1991 |
石油测量数值表.第2部分:根据参比温度20℃编制的表 |
Petroleum measurement tables; part 2: tables based on a reference temperature of 20 C |
ISO 910-1977 |
工业用硫酸和发烟硫酸.总酸度的测定以及发烟硫酸中游离三氧化硫含量的计算.滴定法 |
Sulphuric acid and oleum for industrial use; Determination of total acidity, and calculation of free sulphur trioxide content of oleum; Titrimetric method |
ISO 9100-1992 |
广口玻璃容器.真空凸缘瓶口.尺寸 |
Wide-mouth glass containers; vacuum lug finishes; dimensions |
ISO 9101-1987 |
表面活性剂.界面张力的测定.滴体积法 |
Surface active agents; Determination of interfacial tension; Drop volume method |
ISO 9102-1997 |
柴油发动机.内螺纹喷嘴架,24,25,26,和26.1型 |
Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1 |
ISO 9103-1987 |
道路车辆.压燃式发动机.23型螺旋拧入式注油嘴 |
Road vehicles; Compression-ignition engines; Screw-in injection nozzle holder, type 23 |
ISO 9104-1991 |
封闭管道中液体流量的测量.液体的电磁流量计特性评定法 |
Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids |
ISO 911-1977 |
工业用硫酸.用硫酸密度计算其浓度 |
Sulphuric acid for industrial use; Evaluation of sulphuric acid concentration by measurement of density |
ISO 9110-1-1990 |
液压传动.测量技术.第1部分:通用测量原理 |
Hydraulic fluid power; measurement techniques; part 1: general measurement principles |
ISO 9110-2-1990 |
液压传动.测量技术.第2部分:在封闭式管道中对平均稳定压力的测量 |
Hydraulic fluid power; measurement techniques; part 2: measurement of average steady-state pressure in a closed conduit |
ISO 9112-1991 |
卡车和公共汽车轮胎.轮胎滚动周长的测量方法.承载新轮胎 |
Truck and bus tyres; method of measuring tyre rolling circumference; loaded new tyres |
ISO 9113-1986 |
塑料.聚丙烯(PP)和丙烯共聚物热塑塑料.全同指数的测定 |
Plastics; Polypropylene (PP) and propylene-copolymer thermoplastics; Determination of isotactic index |