标准号 |
中文名称 |
英文名称 |
ISO 6969-1999 |
道路车辆.音响信号装置.车辆装配后的试验 |
Road vehicles - Sound signalling devices - Tests after mounting on vehicle |
ISO 6969-2004 |
道路车辆.音响信号装置.装车后的试验 |
|
ISO 697-1981 |
表面活性剂.洗涤粉.表观密度的测定.一定容积的质量测定法 |
Surface active agents; Washing powders; Determination of apparent density; Method by measuring the mass of a given volume |
ISO 6970-1994 |
机动脚踏车和机动脚踏两用车的污染试验.框架测力计 |
Motorcycles and mopeds - Pollution tests - Chassis dynamometer bench |
ISO 6971-2002 |
焊接结构拉曳用弯板链、附件和链轮 |
Cranked-link drag chains of welded construction, attachments and sprockets |
ISO 6972-2002 |
焊接结构工程用弯板链、附件和链轮 |
Cranked-link mill chains of welded construction, attachments and sprockets |
ISO 6973-1986 |
输送机用落锤锻无铆接链条 |
Drop-forged rivetless chains for conveyors |
ISO 6974-1-2000 |
天然气.用气相色谱法测定规定的不确定度的组分.第1部分:简明分析导则 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis |
ISO 6974-2-2001 |
天然气.用气相色谱法测定规定的不确定度的组分.第2部分:测量系统特性和数据处理统计 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data |
ISO 6974-3-2000 |
天然气.用气相色谱法测定规定的不确定度的组分.第3部分:用两填充柱测定氢、氦、氧、氮、二氧化碳和C以上烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C using two packed columns |
ISO 6974-4-2000 |
天然气.用气相色谱法测定规定的不确定度的组分.第4部分:用两柱测定实验室和联机测量系统用氮、二氧化碳和C到C和C的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C to C and C hydrocarbons for a laboratory and on-line measuring system using two columns |
ISO 6974-5-2000 |
天然气.用气相色谱法测定规定的不确定度的组分.第5部分:用三柱测定实验室和联机处理用氮、二氧化碳和C到C和C的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-line process application using three columns |
ISO 6974-6 Technical Corrigendum 1-2003 |
天然气.用气相色谱法测定规定的不确定度的组分.第6部分:用三个毛细管柱测定氢、氦、氧、氮、二氧化碳和C1到 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns; Technical Corrigendum 1) |
ISO 6974-6 Technical Corrigendum 1-2003 |
天然气.用气相色谱法测定规定了不确定度的组分.第6部分:用三个毛细管柱测定氢、氦、氧、氮、二氧化碳和C1到C8的烃类.技术勘误1 |
|
ISO 6974-6-2002 |
天然气.用气相色谱法测定规定的不确定度的组分.第6部分:用三个毛细管柱测定氢、氦、氧、氮、二氧化碳和C到C的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C to C hydrocarbons using three capillary columns |
ISO 6975-1997 |
天然气.扩展分析.气相色谱法 |
Natural gas - Extended analysis - Gas-chromatographic method |
ISO 6976 Technical Corrigendum 2-1997 |
天然气.热值,密度,相对密度和成分的沃泊指数的计算.技术勘误表2 |
Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 2 |
ISO 6976 Technical Corrigendum 3-1999 |
天然气.成分的沃伯指数和相对密度,密度及热值的计算.技术勘误3 |
Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3 |
ISO 6977-1983 |
天燃气.水和甲醇含量的测定.气相色谱法 |
Natural gas; Determination of water and methanol contents; Gas chromatographic method |
ISO 6978-1-2003 |
天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样 |
(Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine) |
ISO 6978-1-2003 |
天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样 |
|
ISO 6978-1-2003 |
天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样 |
|
ISO 6978-1-2003 |
天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样 |
|
ISO 6978-1992 |
天燃气.汞测定 |
Natural gas; determination of mercury |
ISO 6978-2 Technical Corrigendum 1-2004 |
天然气.汞的测定.第2部分:用金/铂合金混汞法对汞的采样.技术勘误1 |
|
ISO 6978-2-2003 |
天然气.汞的测定.第2部分:用碘/铂合金混汞法对汞的采样 |
(Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy) |
ISO 6978-2-2003 |
天然气.汞的测定.第2部分:用碘/铂合金混汞法对汞的采样 |
|
ISO 6978-2-2003 |
天然气.汞的测定.第2部分:用碘/铂合金混汞法对汞的采样 |
|
ISO 6978-2-2003 |
天然气.汞的测定.第2部分:用碘/铂合金混汞法对汞的采样 |
|
ISO 6980-1996 |
校准剂量计和剂量强度计及测定充作为β辐射能量函数的灵敏度用的β标准放射源 |
Reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy |
ISO 6980-2-2004 |
核能.参考β粒子辐射.第2部分:辐射场的基本数量特性的相关校正基础 |
|
ISO 6981-1992 |
液压传动.液压缸.活塞杆端孔.装配尺寸 |
Hydraulic fluid power; cylinders; rod end plain eyes; mounting dimensions |
ISO 6982-1992 |
液压传动.液压缸.活塞杆端球面环孔.装配尺寸 |
Hydraulic fluid power; cylinders; rod end spherical eyes; mounting dimensions |
ISO 6983-1-1982 |
机床的数字控制.程序格式和地址字码的确定.第1部分:定位,移行和连续控制系统的数据格式 |
Numerical control of machines; Program format and definition of address words; Part 1 : Data format for positioning, line motion and contouring control systems |
ISO 6984-1990 |
矿井提升用绞合钢丝绳的非合金钢丝.规范 |
Round non-alloy steel wires for stranded wire ropes for mine hoisting; specifications |
ISO 6986-1983 |
有可转位刀片的三面刃(开槽)铣刀.尺寸 |
Side and face milling (slotting) cutters with indexable inserts; Dimensions |
ISO 6987-1998 |
有圆柱形固定孔和圆角的可转位硬质合金刀片.尺寸 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions |
ISO 6988-1985 |
金属涂层和其它无机物涂层.在一般水分冷凝作用下的二氧化硫试验 |
Metallic and other non organic coatings; Sulfur dioxide test with general condensation of moisture |
ISO 6989-1981 |
纺织纤维.短纤维长度和长度分布的测定(用单纤维的测定) |
Textile fibres; Determination of length and length distribution of staple fibres (by measurement of single fibres) |
ISO 699-1982 |
纸浆.耐碱性的测定 |
Pulps; Determination of alkali resistance |
ISO 6992-1986 |
供应饮水的未增塑聚氯乙烯(PVC-U)管.作为杂质出现的镉和汞的可萃取性 |
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply; Extractability of cadmium and mercury occurring as impurities |
ISO 6993-2001 |
输送气体燃料用埋设的、高耐冲击的聚氯乙烯(PVC-HI)管道.规范 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels - Specification |
ISO 6994-1986 |
铝矿石.铝含量的测定.乙二胺二乙酸(EDTA)滴定法 |
Aluminium ores; Determination of aluminium content; EDTA titrimetric method |
ISO 6995-1985 |
铝矿石.钛含量的测定.4,4`二安替比林基代甲烷分光光度测定法 |
Aluminium ores; Determination of titanium content; 4,4`-Diantipyrylmethane spectrophotometric method |
ISO 6997-1985 |
炼铝用碳素材料.煅烧焦炭.表观油含量的测定.加热法 |
Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method |
ISO 6998 Technical Corrigendum 1-1999 |
炼铝用碳素材料.电极用沥青.焦化值的测定.技术勘误1 |
Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1 |
ISO 6998-1997 |
炼铝用碳素材料.电极用沥青.焦化值的测定 |
Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value |
ISO 6999-1983 |
炼铝用碳素材料.电极用沥青.密度的测定.测比重法 |
Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method |
ISO 7-1-1994 |
密封连接的管螺纹.第1部分:尺寸、公差与命名 |
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation |
ISO 7-2-2000 |
螺纹密封连接的管螺纹.第2部分:用极限量规验证 |
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges |
ISO 70-1981 |
电影摄影.在35mm电影胶片上的35mm负片光学声带.位置和最大宽度尺寸 |
Cinematography; 35 mm negative photographic sound record on 35 mm motion-picture film; Position and maximum width dimensions |
ISO 700-1982 |
运用于钨极惰性气体保护电弧焊(TIG)和涂药焊条的手工金属电弧焊接电源 |
Power sources for manual metal arc welding with covered electrodes and for the TIG process |
ISO 7000-1989 |
设备用图形符号.索引和一览表.两种语言版 |
Graphical symbols for use on equipment; index and synopsis |
ISO 7000-2004 |
设备用图形符号.索引和一览表 |
|
ISO 7000-2004 |
设备用图形符号.索引和一览表 |
|
ISO 7001 AMD 1-1993 |
第1次修改 |
Public information symbols; amendment 1 |
ISO 7001-1990 |
公共信息符号 |
Public information symbols |
ISO 7002-1986 |
农产食品.从大量食品中标准取样法的方案 |
Agricultural food products; Layout for a standard method of sampling from a lot |
ISO 7004-2002 |
摄影技术.工业用射线照相胶片.置于X射线和γ射线下的胶片ISO感光度、ISO平均梯度和ISO梯度G2和64的测定 |
Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and 64 when exposed to X- and gamma-radiation |
ISO 7005-1-1992 |
金属法兰.第1部分:钢法兰 |
Metallic flanges; part 1: steel flanges |
ISO 7005-2-1988 |
金属法兰.第2部分:铸铁法兰 |
Metallic flanges; part 2: cast iron flanges |
ISO 7005-3-1988 |
金属法兰.第3部分:铜合金和组合法兰 |
Metallic flanges; part 3: copper alloy and composite flanges |
ISO 7006-1981 |
木工机械.安装圆锯片的主轴直径 |
Woodworking machines; Diameters of spindles for receiving circular sawblades |
ISO 7007-1983 |
木工机械.台式带锯机.专用术语和验收条件 |
Woodworking machines; Table bandsawing machines; Nomenclature and acceptance conditions |
ISO 7008-1983 |
木工机械.有或无移动平台的单刃圆盘锯机.专用术语和验收条件 |
Woodworking machines; Single blade circular saw benches with or without travelling table; Nomenclature and acceptance conditions |
ISO 7009-1983 |
木工机械.单轴造型机.专用术语和验收条件 |
Woodworking machines; Single spindle moulding machines; Nomenclature and acceptance conditions |
ISO 701-1998 |
国际齿轮表示法.几何数据符号 |
International gear notation - Symbols for geometrical data |
ISO 7010-2003 |
图形符号.安全颜色和安全标志.用于工作地点及公共场所的安全标志 |
(Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas) |
ISO 7010-2003 |
图形符号.安全颜色和安全标志.用于工作地点及公共场所的安全标志 |
|
ISO 702-1-2001 |
机床.主轴头和卡盘的连接尺寸.第1部分:圆锥形连接 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection |
ISO 702-2-1975 |
机床.主轴头和卡盘.互换尺寸.第2部分:凸轮锁紧型 |
Machine tools; spindle noses and face plates; sizes for interchangeability; part 2: Camlock type |
ISO 702-3-1975 |
机床.主轴头和卡盘.互换尺寸.第3部分:卡口型 |
Machine tools; spindle noses and face plates; sizes for interchangeability; part 3: bayonet type |
ISO 702-3-1975 |
机床.主轴头和卡盘.互换尺寸.第3部分:卡口型 |
Machine tools; spindle noses and face plates; sizes for interchangeability; part 3: bayonet type |
ISO 702-4-2004 |
机床.主轴端部和工件夹盘的连接尺寸.第4部分:圆柱形连接 |
|
ISO 702-4-2004 |
机床.主轴端部和工件夹盘的连接尺寸.第4部分:圆柱形连接 |
|
ISO 7023-1983 |
包装.包装袋.试验用空纸袋取样法 |
Packaging; Sacks; Method of sampling empty sacks for testing |
ISO 7026-1997 |
柴油发动机.S规格B类针式喷嘴的20、21、21.1和27型螺旋拧入式喷嘴架 |
Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size S, type B |
ISO 7027-1999 |
水质.混浊度的测定 |
Water quality - Determination of turbidity |
ISO 7029-2000 |
声学.作为龄期函数的听力阈的统计分布 |
Acoustics - Statistical distribution of hearing tresholds as a function of age |
ISO 703-1-1999 |
传送带.横向挠性和可成槽形性.第1部分:试验方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method |
ISO 7030-1987 |
道路车辆.12、13、14、15、16、17、18和19型螺旋拧入式喷嘴架 |
Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 |
ISO 7033-1987 |
混凝土的细集料和粗集料.单位体积颗粒质量和吸水性的测定.比重瓶法 |
Fine and coarse aggregates for concrete; Determination of the particle mass-per-volume and water absorption; Pycnometer method |
ISO 704-2000 |
术语工作.原则和方法 |
Terminology work - Principles and methods |
ISO 7040-1997 |
1 型通用扭矩六角螺母(用非金属垫圈).性能类别 5,8和10 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 |
ISO 7041-2002 |
2 型长效扭矩六角螺母(用非金属垫圈).性能类别 9和12 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 - Property classes 9 and 12 |
ISO 7042-1997 |
2型,常用扭矩全金属六角螺母.性能类别5,8,10和12 |
Prevailing torque type all-metal hexagon nuts, style 2 - Property classes 5, 8, 10 and 12 |
ISO 7043-1997 |
经常作用的扭矩型带法兰的六角螺母(非金属垫圈).产品等级A和B |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) - Product grades A and B |
ISO 7044-1997 |
通用扭矩型全金属带法兰螺母.产品等级A和B |
Prevailing torque type all-metal hexagon nuts with flange - Product grades A and B |
ISO 7045-1994 |
带H型或Z型十字槽的平圆头螺钉.产品等级A |
Pan head screws with type H or type Z cross recess; product grade A |
ISO 7046-1-1994 |
带H型或Z型十字槽的平沉头螺钉(通用头).产品等级A.第1部分:强度等级4.8 |
Countersunk flat head screws (common head style) with type H or type Z cross recess; product grade A; part 1: steel of property class 4.8 |
ISO 7046-2-1990 |
十字槽沉头螺钉(普通头型).等级A.第2部分:8.8类特性钢,不锈钢和有色金属 |
Cross recessed countersunk flat head screws (common head style); grade A; part 2: steel of property class 8.8, stainless steel and non-ferrous metals |
ISO 7047-1994 |
带H型或Z型十字槽半圆头沉头螺钉.产品等级A |
Countersunk raised head screws (common head style) with type H or type Z cross recess; product grade A |
ISO 7048-1998 |
十字槽平头螺钉 |
Cross recessed cheese head screws |
ISO 7049-1983 |
十字槽平圆头自攻螺钉 |
Cross recessed pan head tapping screws |
ISO 705-1994 |
橡胶胶乳.5℃-40℃间密度的测定 |
Rubber latex - Determination of density between 5 鳦 and 40 鳦 |
ISO 7050-1983 |
十字槽沉头自攻螺钉(普通头型) |
Cross recessed countersunk (flat) head tapping screws (common head style) |
ISO 7051-1983 |
十字槽半沉头椭圆头自攻螺钉 |
Cross recessed raised countersunk (oval) head tapping screws |
ISO 7053-1992 |
六角垫圈头自攻螺钉 |
Hexagon washer head tapping screws |
ISO 7056-1981 |
实验室塑料器皿.烧杯 |
Plastics laboratory ware; Beakers |
ISO 7057-1981 |
实验室塑料器皿.过滤漏斗 |
Plastics laboratory ware; Filter funnels |
ISO 7058-1983 |
工业用磷酸.高溶性硫酸盐含量的测定.还原后滴定法 |
Phosphoric acid for industrial use; Determination of higher soluble sulfate contents; Titrimetric method after reduction |
ISO 7059-1982 |
工业用己内酰胺.在波长 290nm时吸收率的测定 |
Caprolactam for industrial use; Determination of absorbance at a wavelength of 290 nm |
ISO 706-1985 |
橡胶胶乳.凝结物(筛余物)含量的测定 |
Rubber latex; Determination of coagulum content (sieve residue) |
ISO 706-2004 |
橡胶胶乳.凝固物(筛余物)含量的测定 |
|
ISO 7060-1982 |
工业用己内酰胺.结晶点的测定 |
Caprolactam for industrial use; Determination of crystallizing point |
ISO 7061-1993 |
造船.海船的铝质搭岸跳板 |
Shipbuilding; aluminium shore gangways for seagoing vessels |
ISO 7063-1982 |
滚针轴承.滚道滚针型.公差 |
Needle roller bearings; Track rollers; Tolerances |
ISO 7063-2003 |
滚动轴承.滚针轴承滚道滚针.边界尺寸和公差 |
|
ISO 7064-1983 |
数据处理.检验符号系统 |
Data processing; Check character systems |
ISO 7065-1-1985 |
信息处理.以限定的频率13262次磁通变换/弧度和1.9次变换/mm(48次变换/in)在两侧调制录制的200mm(8in)盒式软磁盘的数据交换.第1部分:尺寸、物理和磁性特征 |
Information processing; Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 1 : Dimensional, physical and magnetic characteristics |
ISO 7065-2-1985 |
信息处理.以限定的频率13262次磁通变换/弧度和1.9次变换/mm(48次变换/in)在两侧调制录制的200mm(8in)盒式软磁盘的数据交换.第2部分:磁道排列格式 |
Information processing; Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 2 : Track format |
ISO 7066-2-1988 |
流量测量装置校准和使用的不确定度的评价.非线性校准关系 |
Assessment of uncertainty in the calibration and use of flow measurements devices; part 2: non-linear calibration relationships |
ISO 707-1997 |
奶乳和乳制品.取样导则 |
Milk and milk products - Guidance on sampling |
ISO 707-1997 |
奶乳和乳制品.取样导则 |
Milk and milk products - Guidance on sampling |
ISO 7072-1993 |
农业和林业拖拉机和机械.车轴销和弹簧销的尺寸和要求 |
Tractors and machinery for agriculture and forestry; linch pins and spring pins; dimensions and requirements |
ISO 7077-1981 |
建筑物的测量方法.验证尺寸符合的一般原则和步骤 |
Measuring methods for building; General principles and procedures for the verification of dimensional compliance |
ISO 7078-1985 |
建筑结构.放线,测量和测绘程序.词汇和指南.两种语言版 |
Building construction; Procedures for setting out, measurement and surveying; Vocabulary and guidance notes Bilingual edition |
ISO 7079-1981 |
莫氏锥柄和直柄的空心钻 |
Core drills with parallel shanks and with Morse taper shanks |
ISO 7083-1983 |
技术制图.几何形位公差的符号.比例和尺寸 |
Technical drawings; Symbols for geometrical tolerancing; Proportions and dimensions |
ISO 7085-1999 |
表面淬火和回火的米制滚螺纹螺钉的机械和性能要求 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |