标准号 |
中文名称 |
英文名称 |
| ISO 8455-1986 |
袋装生咖啡豆.贮存和运输指南 |
Green coffee in bags; Guide to storage and transport |
| ISO 8456-1985 |
松散物料的储存设备.安全规范 |
Storage equipment for loose bulk materials; Safety code |
| ISO 8457-1-1989 |
钢丝条.第1部分:尺寸和公差 |
Steel wire rod; part 1: dimensions and tolerances |
| ISO 8458-1-2002 |
机械弹簧用钢丝.第1部分:一般要求 |
Steel wire for mechanical springs - Part 1: General requirements |
| ISO 8458-2-2002 |
机械弹簧用钢丝.第2部分:铅淬冷拔非合金钢丝 |
Steel wire for mechanical springs - Part 2: Patented cold-drawn non-alloy steel wire |
| ISO 8458-3-2002 |
机械弹簧用钢丝.第3部分:油淬火和回火钢丝 |
Steel wire for mechanical springs - Part 3: Oil-hardened and tempered wire |
| ISO 8459-1-1988 |
文献工作.目录数据名录.第1部分:内部流通应用 |
Documentation; bibliographic data element directory; part 1: interloan applications |
| ISO 8459-2-1992 |
情报和文献.书目数据手册.第2部分:采购应用 |
Information and documentation; bibliographic data element directory; part 2: acquisitions applications |
| ISO 8459-3-1994 |
信息和文献.书目数据手册.第3部分:信息检索的应用 |
Information and documentation - Bibliographic data element directory - Part 3: Information retrieval applications |
| ISO 8459-4-1998 |
文献工作.目录数据指南.第1部分:循环使用 |
Information and documentation - Bibliographic data element directory - Part 4: Circulation applications |
| ISO 846-1997 |
塑料.微生物作用的评价 |
Plastics - Evaluation of the action of microorganisms |
| ISO 8460-1987 |
速溶咖啡.自由流动和压实体密度的测定 |
Instant coffee; Determination of free-flow and compacted bulk densities |
| ISO 8462-1-1986 |
信息处理.以394次磁通变换/mm(10000)次磁通变换/in和39字符/mm录制的(1000字符/in)录制的字符集编码记录(GCR)的6.30mm(0.25in)盒式磁带数据交换.第1部分:机械、物理和磁性特征 |
Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi); Part 1 : Mechanical, physical and magnetic properties |
| ISO 8462-2-1986 |
信息处理.以394次磁通变换/mm)10000次磁通变换/in)和39字符/mm)1000字符/in)录制的字符集编码记录(GCR 的6.30mm(0.25in)盒式磁带数据交换.第2部分:流动式 |
Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi); Part 2 : Streaming mode |
| ISO 8466-1-1990 |
水质.对水的性能特征分析方法和评价方法的校准与计算.第1部分:线性效验功能的统计计算 |
Water quality; calibration and evaluation of analytical methods and estimation of performance characteristics; part 1: statistical evaluation of the linear calibration function |
| ISO 8466-2-2001 |
水质.对水的性能特性分析方法和评价方法的校准与计算.第2部分:非线性二级校准方程的校准方法 |
Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions |
| ISO 8467-1993 |
水质.高锰酸盐指数的测定 |
Water quality; determination of permanganate index |
| ISO 8468-1990 |
船桥设计和有关设备.要求和导则 |
Ship`s bridge layout and associated equipment; requirements and guidelines |
| ISO 8469-1994 |
小型船舶.不耐火的燃料软管 |
Small craft - Non-fire-resistant fuel hoses |
| ISO 8470 DAM 1-1991 |
道路车辆.带平座和16mm六角体的M14×1.25火花塞及其缸头盖.第1次修改 |
Road vehicles; M14 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing; amendment 1 |
| ISO 8470-2001 |
道路车辆.带平座和16mm六角M14×1.25火花塞及其在汽缸盖上的座孔 |
Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 8474-1986 |
包装.满装的运输包装.浸水试验 |
Packaging; Complete, filled transport packages; Water immersion test |
| ISO 8478-1996 |
摄影.摄影机透镜.ISO 光谱透射率的测量 |
Photography - Camera lenses - Measurement of ISO spectral transmittance |
| ISO 8479-1986 |
航空航天.流体系统的Q形夹.尺寸 |
Aerospace; Q clamps (centre-mounted clamps) for fluid systems; Dimensions |
| ISO 848-1981 |
工业用磷酸.钙含量的测定.滴定法 |
Phosphoric acid for industrial use; Determination of calcium content; Titrimetric method |
| ISO 8483-2003 |
玻璃增强热固性塑料管及配件.栓结法兰接头设计验证的试验方法 |
(Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints) |
| ISO 8483-2003 |
玻璃增强热固性塑料管及配件.栓结法兰接头设计验证的试验方法 |
|
| ISO 8484-1987 |
储蓄存折的磁条 |
Magnetic stripes on savingsbooks |
| ISO 8485-1989 |
程序设计语言.APL |
Programming languages; APL |
| ISO 8486-1-1996 |
粘合磨料.粒度分布的测定和名称与符号.第1部分:粒度从F4至F220 |
Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 |
| ISO 8486-1-1996 |
粘合磨料.粒度分布的测定和名称与符号.第1部分:粒度从F4至F220 |
Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 |
| ISO 8486-2-1996 |
粘合磨料.粒度分布的测定、名称与符号.第2部分:粒度从F230至F1200 |
Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F1200 |
| ISO 8488-1986 |
自行车.用于装配在自行车叉上头部配件的螺纹 |
Cycles; Screw threads used to assemble head fittings on bicycle forks |
| ISO 8489-1-1995 |
纺织机械和附件.交叉卷绕络纱筒子.第1部分:推荐的主要尺寸 |
Textile machinery and accessories - Cones for cross winding - Part 1: Recommended main dimensions |
| ISO 8489-2-1995 |
纺织机械和附件.交叉卷绕络纱筒子.第2部分:有半角(3角度) 30弧分的卷绕络纱筒子 |
Textile machinery and accessories - Cones for cross winding - Part 2: Dimensions, tolerances and designation of cones with half angle 3 30 |
| ISO 8489-3-1995 |
纺织机械和附件.交叉卷绕络纱筒子.第3部分:有半角(4角度, 20弧分)的卷绕络纱筒子 |
Textile machinery and accessories - Cones for cross winding - Part 3: Dimensions, tolerances and designation of cones with half angle 4 20 |
| ISO 8489-4-1995 |
纺织机械和附件.交叉卷绕络纱筒子.第4部分:染色卷绕络纱用有半角(4角度, 20弧分)的卷绕络纱筒子的尺寸,公差和命名 |
Textile machinery and accessories - Cones for cross winding - Part 4: Dimensions, tolerances and designation of cones with half angle 4 20 for winding for dyeing purposes |
| ISO 8489-5-1995 |
纺织机械和附件.交叉卷绕络纱筒子.第5部分:有半角(5角度、 57弧分)的卷绕络纱筒子的尺寸、公差和命名 |
Textile machinery and accessories - Cones for cross winding - Part 5: Dimensions, tolerances and designation of cones with half angle 5 57 |
| ISO 8490-1986 |
金属材料.板材和带材.改进的克里森杯突试验 |
Metallic materials; Sheet and strip; Modified Erichsen cupping test |
| ISO 8491-1998 |
金属材料.管材(全截面).弯曲试验 |
Metallic materials - Tube (in full section) - Bend test |
| ISO 8492-1998 |
金属材料.管材.压扁试验 |
Metallic materials - Tube - Flattening test |
| ISO 8493-1998 |
金属材料.管材.扩张试验 |
Metallic materials - Tube - Drift-expanding test |
| ISO 8494-1998 |
金属材料.管材.卷边试验 |
Metallic materials - Tube - Flanging test |
| ISO 8495-1998 |
金属材料.管材.环形扩管试验 |
Metallic materials - Tube - Ring-expanding test |
| ISO 8496-1998 |
金属材料.管材.环形拉伸试验 |
Metallic materials - Tube - Ring tensile test |
| ISO 8497-1994 |
绝热.圆形管道用绝热稳定状态中热传输性能测定 |
Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
| ISO 8498-1990 |
机织织物.织疵的描述.词汇 |
Woven fabrics; description of defects; vocabulary |
| ISO 8499-1990 |
针织物.疵点的描述.词汇 |
Knitted fabrics; description of defects; vocabulary |
| ISO 8499-2003 |
针织物.疵点的描述.词汇 |
(Knitted fabrics - Description of defects - Vocabulary ) |
| ISO 8499-2003 |
针织物.疵点的描述.词汇 |
|
| ISO 850-1976 |
工业用三聚磷酸钠.不溶于水物质的测定 |
Sodium tripolyphosphate for industrial use; Determination of matter insoluble in water |
| ISO 8501-1 Supplement-1994 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分的补充信息:用不同磨料喷砂处理时钢表面变化的典型摄影实例 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast- |
| ISO 8501-2-1994 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第2部分:已有覆层局部除去后已涂覆钢衬体的制备等级 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8501-3-2001 |
涂料和有关产品使用之前钢衬底的预处理.表面清洁度的目视评定.第3部分:焊缝、切边及其它有表面缺欠的部位预处理等级 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections |
| ISO 8502-10-1999 |
使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第10部分:滴定测定水溶氯化物的现场试验方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 10: Field method for the titrimetric determination of water-soluble chloride |
| ISO 8502-12-2003 |
使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第12部分:滴定测定水溶铁离子的现场试验方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrrous ions |
| ISO 8502-12-2003 |
使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第12部分:滴定测定水溶铁离子的现场试验方法 |
|
| ISO 8502-12-2003 |
使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第12部分:滴定测定水溶铁离子的现场试验方法 |
|
| ISO 8502-12-2003 |
使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第12部分:滴定测定水溶铁离子的现场试验方法 |
|
| ISO 8502-2-1992 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第2部分:清洁表面氯化物的实验室测定 |
Preparation of steel substrates before application of paints and related products; tests for the assessment of surface cleanliness; part 2: laboratory determination of chloride on cleaned surfaces |
| ISO 8502-3-1992 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第3部分:涂漆钢表面粉尘评定 |
Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4-1993 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第4部分:涂料使用前的凝结可能性评定导则 |
Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8502-5-1998 |
涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第5部分:涂覆前已处理钢表面上氯化物的测量(离子检测管法) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| ISO 8502-6-1995 |
涂料和有关产品使用前的钢衬底的制备.表面清洁度的评定试验.第6部分:Bresle法分析用可溶性杂质的析取 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method |
| ISO 8502-8-2001 |
涂料和有关产品使用前的钢衬底的制备.表面清洁度的评定试验.第8部分:湿度折射测定的现场法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture |
| ISO 8502-9-1998 |
涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第9部分:水溶性盐电导测定的现场方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8503-1-1988 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第1部分:喷砂处理表面的 ISO评定比较样板的规范和定义 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasi |
| ISO 8503-2-1988 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第2部分:喷砂处理表面的定级方法.比较方法 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure |
| ISO 8503-3-1988 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第3部分:ISO表面轮廓比较仪的校准方法和表面轮廓的测定方法.显微镜的调焦方法 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surf |
| ISO 8503-4-1988 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第4部分:ISO表面轮廓比较仪的校准方法和表面轮廓的测定方法.触针仪器的方法 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf |
| ISO 8503-5-2003 |
涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile) |
| ISO 8503-5-2003 |
涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法 |
|
| ISO 8503-5-2003 |
涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法 |
|
| ISO 8504-1-2000 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第1部分:通用原理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles |
| ISO 8504-2-2000 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第2部分:喷砂清理 |
Preparation of steel substrates before application of paints and related product - Surface preparation methods - Part 2: Abrasive blast-cleaning |
| ISO 8504-3-1993 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第3部分:手工工具和电动工具清洗 |
Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 8507-1997 |
集成软木盘.试验方法 |
Agglomerated cork discs - Test methods |
| ISO 8509-1987 |
信息处理系统.开放系统互连.服务协议 |
Information processing systems; Open Systems Interconnection; Service conventions |
| ISO 851-1976 |
工业用三聚磷酸钠.pH值的测定.电位滴定法 |
Sodium trypolyphosphate for industrial use; Measurement of pH; Potentiometric method |
| ISO 8510-1-1990 |
粘合剂.软硬粘结试样组件剥离试验.第1部分:90度剥离 |
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90?peel |
| ISO 8510-2-1990 |
粘合剂.软硬粘结试样组件的剥离试验.第2部分:180度剥离 |
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 2: 180?peel |
| ISO 8511-1995 |
橡胶配方配合剂.炭黑.粒度分布的测定 |
Rubber compounding ingredients - Carbon black - Determination of pellet size distribution |
| ISO 8512-1-1990 |
划线平板.第1部分:铸铁 |
Surface plates; part 1: cast iron |
| ISO 8512-2-1990 |
划线平板.第2部分:花岗岩 |
Surface plates; part 2: granite |
| ISO 8513-2000 |
塑料管道系统.玻璃纤维增强热固性塑料管(GRP).纵向拉伸性能的测定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longitudinal tensile properties |
| ISO 8514-1-2000 |
缩微摄影技术.字母数字计算机输出缩微品.质量控制.第1部分:试验片和试验数据的特征 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 1: Characteristics of the test slide and test data |
| ISO 8514-2-2000 |
缩微摄影技术.字母数字计算机输出缩微品.质量控制.第2部分:方法 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 2: Method |
| ISO 8516-1987 |
纺织玻璃纤维.变形纱线.规范的基础 |
Textile glass; Textured yarns; Basis for a specification |
| ISO 8518-2001 |
工作场所空气.微粒铅和铅化合物含量测定.火焰或电热原子吸收光谱测定法 |
Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method |
| ISO 8521-1998 |
塑料管道系统.玻璃增强热固塑料(GRP)管:表面内周拉伸强度的测定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| ISO 8523-1991 |
微生物学.预浓缩肠杆菌族检测的一般指南 |
Microbiology; general guidance for the detection of Enterobacteriaceae with pre-enrichment |
| ISO 8524-1986 |
播撒颗粒状杀虫剂或除草剂的设备.试验方法 |
Equipment for distributing granulated pesticides or herbicides; Test method |
| ISO 8526-1-1990 |
组合机床部件.工件夹板.标称尺寸800mm及以下的工件夹板 |
Modular units for machine tools; workholding pallets; part 1: workholding pallets up to 800 mm nominal size |
| ISO 8526-2 Technical Corrigendum 1-1992 |
组合机床部件.工件夹板.第2部分:公称尺寸大于800mm工件夹板.技术勘误1 |
Modular units for machine tools; workholding pallets; part 2: workholding pallets of nominal size greater than 800 mm; technical corrigendum 1 |
| ISO 8526-2-1990 |
组合机床部件.工件夹板.第2部分:标称尺寸800mm以上的工件夹板 |
Modular units for machine tools; workholding pallets; part 2: workholding pallets of nominal size greater than 800 mm |
| ISO 8528-1-1993 |
往复式内燃机驱动的交流发电机组.第1部分:使用、额定功率和性能 |
Reciprocating internal combustion engine driven alternating current generating sets; part 1: application, ratings and performance |
| ISO 8528-10-1998 |
往复式内燃机驱动的交流发电机组.第10部分:包络面法测量空气噪声 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method |
| ISO 8528-12-1997 |
往复式内燃机驱动的交流发电机组.第12部分:应急发电设备 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services |
| ISO 8528-2-1993 |
往复式内燃机驱动的交流发电机组.第2部分:发动机 |
Reciprocating internal combustion engine driven alternating current generating sets; part 2: engines |
| ISO 8528-3-1993 |
往复式内燃机驱动的交流发电机组.第3部分:机组交流发电机 |
Reciprocating internal combustion engine driven alternating current generating sets; part 3: alternating current generators for generating sets |
| ISO 8528-4-1993 |
往复式内燃机驱动的交流发电机组.第4部分:控制装置机开关装置 |
Reciprocating internal combustion engine driven alternating current generating sets; part 4: controlgear and switchgear |
| ISO 8528-5-1993 |
往复式内燃机驱动的交流发电机组.第5部分:发电机组 |
Reciprocating internal combustion engine driven alternating current generating sets; part 5: generating sets |
| ISO 8528-6-1993 |
往复式内燃机驱动的交流发电机组.第6部分:试验方法 |
Reciprocating internal combustion engine driven alternating current generating sets; part 6: test methods |
| ISO 8528-7-1994 |
往复式内燃机驱动的交流发电机组.第7部分:规范和设计的技术申报 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design |
| ISO 8528-8-1995 |
往复式内燃机驱动的交流发电机组.第8部分:低功率发电机组要求和试验 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets |
| ISO 8528-9-1995 |
往复式内燃机驱动的交流发电机组.第9部分:机械振动的测量和评定 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration |
| ISO 8529-1-2001 |
基准中子辐射.第1部分:特性和生产方法 |
Reference neutron radiations - Part 1: Characteristics and methods of production |
| ISO 8529-1-2001 |
基准中子辐射.第1部分:特性和生产方法 |
Reference neutron radiations - Part 1: Characteristics and methods of production |
| ISO 8529-2-2000 |
参考中子辐射.第2部分:与以辐射场为表征的基本量有关的辐射保护装置的校准规则 |
Reference neutron radiations - Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field |
| ISO 8529-3-1998 |
参考中子辐射.第3部分:区域及个人剂量计的校正和对中子能作用及入射角的反应测定 |
Reference neutron radiations - Part 3: Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence |
| ISO 853-1976 |
工业用三聚磷酸钠和焦磷酸钠.烧失量的测定 |
Sodium tripolyphosphate and sodium pyrophosphate for industrial use; Determination of loss on ignition |
| ISO 8530-1986 |
锰矿石和铬矿石.检验试样组成部分精度的实验方法 |
Manganese and chromium ores; Experimental methods for checking the precision of sample division |
| ISO 8531-1986 |
锰矿石和铬矿石.检验水分测定精度的实验方法 |
Manganese and chromium ores; Experimental methods for checking the precision of moisture determination |
| ISO 8532-1995 |
证券.证券号码传输格式 |
Securities - Format for transmission of certificate numbers |
| ISO 8533-2003 |
玻璃增强热固性塑料管及配件.胶合接头或包好的接头设计验证的试验方法 |
(Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints) |
| ISO 8533-2003 |
玻璃增强热固性塑料管及配件.胶合接头或包好的接头设计验证的试验方法 |
|
| ISO 8534-1996 |
动植物脂肪和油.水含量的测定.卡.弗歇尔(Karl Fischer)法 |
Animal and vegetable fats and oils - Determination of water content - Karl Fischer method |
| ISO 8535-1-1996 |
压燃式发动机.高压喷射燃油管用的钢管.第1部分:无缝冷拔单壁管的要求 |
Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes |
| ISO 8535-2-2003 |
压燃式发动机.高压燃油喷管用钢管.第2部分:组合管的要求 |
(Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes) |
| ISO 8535-2-2003 |
压燃式发动机.高压燃油喷管用钢管.第2部分:组合管的要求 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com