标准号 |
中文名称 |
英文名称 |
ISO 9114-1997 |
原油.通过氢化物反应进行水含量的测定.现场法 |
Crude petroleum - Determination of water content by hydride reaction - Field method |
ISO 9116-1992 |
生咖啡.规范方法指南 |
Green coffee; guidance on methods of specification |
ISO 9116-2004 |
生咖啡.规范方法指南 |
|
ISO 9117-1990 |
色漆和清漆.贯穿干燥状态和贯穿干燥间.试验方法 |
Paints and varnishes; determination of throuh-dry state and through-dry time; method of test |
ISO 9119-1990 |
越野雪橇.连接固定区.要求和试验方法 |
Cross-country skis; binding mounting area; requirements and test methods |
ISO 9123-2001 |
明渠水流测量.水位-落差-流量的关系 |
Measurement of liquid flow in open channels - Stage-fall-discharge relationships |
ISO 9125 AMD 1-2004 |
纤维水泥板和配件.修改件1 |
|
ISO 9125 Technical Corrigendum 1-1993 |
纤维-水泥板和配件.技术勘误1 |
Fibre-cement slates and fittings; technical corrigendum 1 |
ISO 9125-1990 |
纤维-水泥板和配件 |
Fibre-cement slates and fittings |
ISO 9127-1988 |
信息处理系统.用户软件包的用户文件和覆盖信息 |
Information processing systems; user documentation and cover information for consumer software packages |
ISO 9128-1987 |
道路车辆.标注制动液类型的图形符号.两种语言版 |
Road vehicles; Graphical symbols to designate brake fluid types Bilingual edition |
ISO 9129-1988 |
摩托车.惯性矩的测量方法 |
Motorcycles; measurement methods for moments of inertia |
ISO 913-1977 |
工业用硫酸和发烟硫酸.灰分的测定.重量法 |
Sulphuric acid and oleum for industrial use; Determination of ash; Gravimetric method |
ISO 9130-1989 |
摩托车.重心位置的测量方法 |
Motorcycles; measurement method for location of centre of gravity |
ISO 9131-1993 |
三轮机动自行车和摩托车的尺寸.词汇 |
Three wheeled mopeds and motorcycles; dimensions; vocabulary |
ISO 9132-1990 |
二轮机动自行车和摩托车.质量(物质).词汇 |
Three-wheeled mopeds and motorcycles; masses; vocabulary |
ISO 9136-1-2004 |
磨料粒度.堆积密度的测定.第1部分:粗磨粒 |
|
ISO 9136-1-2004 |
磨料粒度.堆积密度的测定.第1部分:粗磨粒 |
|
ISO 9136-1989 |
粗晶粒磨料.容积密度的测定 |
Abrasive macrograins; determination of bulk density |
ISO 9136-2-1999 |
晶粒磨料.体密度的测定.第2部分:粗晶粒磨料 |
Abrasive grains - Determination of bulk density - Part 2: Microgrits |
ISO 9137-1990 |
磨料粒度.毛细(管)作用测定 |
Abrasive grains; determination of capillarity |
ISO 9138-1993 |
磨料粒度.取样和分割 |
Abrasive grains; sampling and splitting |
ISO 9139-1998 |
航空航天.常规或有槽(齿形)螺母.采购规范 |
Aerospace - Nuts, plain or slotted (castellated) - Procurement specification |
ISO 914-1977 |
工业用硫酸和发烟硫酸.氮总含量的测定.蒸馏后滴定法测定 |
(Sulphuric acid and oleum for industrial use; Determination of total nitrogen content; Titrimetric method after distillation) |
ISO 9140-1998 |
航空航天.常规或有槽(齿形)螺母.试验方法 |
Aerospace - Nuts, plain or slotted (castellated) - Test methods |
ISO 9141-1989 |
道路车辆.诊断系统.对数字信息交换的要求 |
Road vehicles - Diagnostic systems - Requirements for interchange of digital information |
ISO 9141-2 AMD 1-1996 |
道路车辆.诊断系统.第2部分:交换数字信息的 CARB 要求.修改件1 |
Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information; Amendment 1 |
ISO 9141-2-1994 |
道路车辆.诊断系统.第2部分:交换数字信息的 CARB 要求 |
(Road vehicles; diagnostic systems; part 2: CARB requirements for interchange of digital information) |
ISO 9141-3-1998 |
道路车辆.诊断系统.第3部分:车辆和OBD2扫描工具之间通信的检验 |
(Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool) |
ISO 9142 Technical Corrigendum 1-1995 |
粘合剂.胶粘连接试验用标准实验室老化条件的选择导则.技术勘误表1 |
(Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints; Technical Corrigendum 1) |
ISO 9142-1990 |
粘合剂.胶粘连接试验用标准实验室老化条件的选择导则 |
(Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints) |
ISO 9142-2003 |
粘合剂.胶粘件试验用标准实验室老化条件的选择指南 |
|
ISO 9144-1991 |
证券.光学字符识别线.位置和结构 |
(Securities; optical character recognition line; position and structure) |
ISO 9147-1987 |
生铁.定义和分类 |
(Pig-irons; Definition and classification) |
ISO 9148-1987 |
装饰用成卷复合软木条.试验方法 |
(Composition cork in rolls for decoration; Test methods) |
ISO 9149-1987 |
装饰用成卷复合软木条.规范 |
(Composition cork in rolls for decoration; Specifications) |
ISO 9150-1988 |
防护服.质料受到小的熔融金属溅击影响的测定 |
(Protective clothing; determination of behaviour of materials on impact of small splashes of molten metal) |
ISO 9151-1995 |
耐热阻燃防护服.火焰暴露下近火传热的测定方法 |
(Protective clothing against heat and flame - Determination of heat transmission on exposure to flame) |
ISO 9152-1998 |
航空航天.强度级别为1100MPa的钛合金MJ螺纹螺栓.采购规范 |
(Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification) |
ISO 9154-1999 |
航空航天.由强度等级为1550MPa的耐热镍基合金制成的带MJ螺纹的螺栓.购置规范 |
(Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification) |
ISO 9156-1998 |
航空航天.平底锪孔MJ螺纹缩径系列90°角固定自锁式系紧螺母.1100MPa(室温)/235℃、1100MPa(室温)/315℃和11 |
(Aerospace - Nuts, anchor, self-locking, fixed, 90 corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 C, 1100 MPa (at ambient temperature)/315 C and 1100 MPa (at ambient temperature)/425 C - D |
ISO 9157-2002 |
航空航天.等级为:1100MPa(室温下)/425℃、1100MPa(室温下)/650℃、1210MPa(室温下)/425℃、1210MPa(室温下) |
(Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/425鳦, 1100 MPa (at ambient temperature)/650鳦, 1210 MPa (at ambient temperature)/425鳦, 1210 MPa (at ambient temperature)/730鳦, 1550 MPa ( |
ISO 9158-1988 |
道路车辆.无铅汽油用管嘴 |
(Road vehicles; nozzle spouts for unleaded gasoline) |
ISO 9159-1988 |
道路车辆.含铅汽油和柴油用管嘴 |
(Road vehicles; nozzle spouts for leaded gasoline and diesel fuel) |
ISO 9160-1988 |
信息处理.数据加密.物理层互用性要求 |
(Information processing; data encipherment; physical layer interoperability requirements) |
ISO 9161-2004 |
二氧化铀粉末.表观密度和堆积密度的测定 |
|
ISO 9162-1989 |
石油产品.燃料(F级).液化石油气.规范 |
(Petroleum products; fuels (class F); liquefied petroleum gases; specifications) |
ISO 9167-1-1992 |
油菜种子.葡萄糖甙含量测定.第1部分:高性能液相色谱法 |
(Rapeseed; determination of glucosinolates content; part 1: method using high-performance liquid chromatography) |
ISO 9168-1991 |
手持式牙科器械.软管连接件 |
(Dental handpieces; hose connectors) |
ISO 9169-1994 |
空气质量.操作特性的测量方法 |
(Air quality - Determination of performance characteristics of measurement methods) |
ISO 917-1989 |
冷冻剂压缩机试验 |
(Testing of refrigerant compressors) |
ISO 9170-1-1999 |
医疗气体管道系统用终端设备.第1部分:供压缩的医用气体和真空使用的终端设备 |
(Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum) |
ISO 9170-2-1999 |
医疗气体管道系统用终端设备.第2部分:麻醉气体清除系统用的终端设备 |
(Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems) |
ISO 9173-1-1991 |
拔牙钳.第1部分:螺钉和铰链接合型 |
(Dental extraction forceps; part 1: screw and pin joint types) |
ISO 9174-1998 |
水质.铬的测定.原子吸收光谱法 |
(Water quality - Determination of chromium - Atomic absorption spectrometric methods) |
ISO 9175-1-1988 |
用绘图墨水的手持式描图纸专用笔的管状笔尖.第1部分:定义、尺寸、名称与符号及标志 |
(Tubular tips for hand-held technical pens using India ink on tracing paper; part 1: definitions, dimensions, designation and marking) |
ISO 9175-2-1988 |
用印度墨水的手持式描图纸专用笔的管状笔尖.第2部分:性能测试参数和测试条件 |
(Tubular tips for hand-held technical pens using india ink on tracing paper; part 2: performance, test parameters and test conditions) |
ISO 9176-1988 |
管状制图笔.圆规转接器 |
(Tubular technical pens; adaptor for compasses) |
ISO 9177-1-1989 |
制图自动铅笔.第1部分:分类、尺寸和性能的要求和检验 |
(Mechanical pencils; part 1: classification, dimensions, performance requirements and testing) |
ISO 9177-2-1989 |
制图自动铅笔.第2部分:石墨.分类和尺寸 |
(Mechanical pencils; part 2: black leads; classification and dimensions) |
ISO 9177-3-1994 |
制图自动铅笔.第2部分:石墨.HB铅笔芯弯曲强度 |
(Mechanical pencils - Part 3: Black leads - Bending strengths of HB leads) |
ISO 9178-1-1988 |
书写和符号的模板.第1部分:一般原则和鉴别标记 |
(Templates for lettering and symbols; part 1: general principles and identification markings) |
ISO 9178-2-1988 |
书写和符号的模板.第2部分:木皮铅笔和细铅笔的槽宽 |
(Templates for lettering and symbols; part 2: slot widths for wood-cased pencils, clutch pencils and fine-lead pencils) |
ISO 9178-3-1989 |
文字和符号的模板.第3部分:按照ISO 9157-1管形笔尖的技术钢笔用的槽宽 |
(Templates for lettering symbols; part 3: slot widths for technical pens with tabular tips in accordance with ISO 9175-1) |
ISO 918-1983 |
工业用挥发性有机液体.蒸馏特性的测定 |
(Volatile organic liquids for industrial use; Determination of distillation characteristics) |
ISO 9180-1988 |
木壳铅笔的黑色铅芯.分类及直径 |
(Black leads for wood-cased pencils; classification and diameters) |
ISO 9181-1990 |
压制用工具.带60°圆锥头和小柄的圆冲床 |
(Tools for pressing; round punches with 60?conical head and reduced shank) |
ISO 9182-1-1992 |
压制用工具.导柱.第1部分:型式 |
(Tools for pressing; guide pillars; part 1: types) |
ISO 9182-2-1992 |
压制用工具.导柱.第2部分:A型:直柱 |
(Tools for pressing; guide pillars; part 2: type A, straight pillars) |
ISO 9182-3-1992 |
压制用工具.导柱.第3部分:B型:端锁柱 |
(Tools for pressing; guide pillars; part 3: type B, end-locking pillars) |
ISO 9182-4-1992 |
压制用工具.导柱.第4部分:C型:具有销度导杆和轴衬的柱 |
(Tools for pressing; guide pillars; part 4: type C, pillars with taper lead and bush) |
ISO 9182-5-1992 |
压制用工具.导柱.第5部分:D型.法兰端锁柱 |
(Tools for pressing; guide pillars; part 5: type D, end-locking pillars with flange) |
ISO 9183-1-1990 |
压制用工具.冲压模用的抗磨板.第1部分:A型 |
(Tools for pressing; wear plates for press dies; part 1: type A) |
ISO 9183-2-1993 |
压制用工具.冲压模用的抗磨板.第2部分:B型 |
(Tools for pressing; wear plates for press dies; part 2: type B) |
ISO 9184-1-1990 |
纸、纸板和纸浆.纤维成分分析.第1部分:一般方法 |
(Paper, board and pulps; fibre furnish analysis; part 1: general method) |
ISO 9184-2-1990 |
纸、纸板和纸浆.纤维成分分析.第2部分:着色指南 |
(Paper, board and pulps; fibre furnish analysis; part 2: staining guide) |
ISO 9184-3-1990 |
纸、纸板和纸浆.纤维成分分析.第3部分:赫伯格着色试验 |
(Paper, board and pulps; fibre furnish analysis; part 3: Herzberg staining test) |
ISO 9184-4-1990 |
纸、纸板和纸浆.纤维成分分析.第4部分:格拉夫(Graff)“C“着色试验 |
(Paper, board and pulps; fibre furnish analysis; part 4: Graff “C“ staining test) |
ISO 9184-5-1990 |
纸、纸板和纸浆.纤维成分分析.第5部分:洛夫顿-梅里特着色试验 |
(Paper, board and pulps; fibre furnish analysis; part 5: Lofton-Merritt staining test (modification of Wisbar)) |
ISO 9184-6-1994 |
纸、纸板和纸浆.纤维成分分析.第6部分:纤维粗糙度测定 |
(Paper, board and pulps - Fibre furnish analysis - Part 6: Determination of fibre coarseness) |
ISO 9184-7-1994 |
纸、纸板和纸浆.纤维成分分析.第6部分:重量系数测定 |
(Paper, board and pulps - Fibre furnish analysis - Part 7: Determination of weight factor) |
ISO 9185-1990 |
防护服.材料抗金属熔液穿透性的评定 |
(Protective clothing; assessment of resistance of materials to molten metal splash) |
ISO 9186-2001 |
图形符号.用于判断和理解的试验方法 |
(Graphical symbols - Test methods for judged comprehensibility and for comprehension) |
ISO 9187-1-2000 |
医用注射设备.第1部分:注射针剂瓶 |
(Injection equipment for medical use - Part 1: Ampoules for injectables) |
ISO 9187-2-1993 |
医用注射设备.第2部分:一点切针剂 |
(Injection equipment for medical use; part 2: one-point-cut (OPC) ampoules) |
ISO 9188-1993 |
机床.公称力从400kN到400kN(含400kN)单动机械式矫直压力机.特性和尺寸 |
(Machine tools; straight-sided single-action mechanical power presses from 400 kN up to and including 4000 kN nominal force; characteristics and dimensions) |
ISO 9189-1993 |
机床.公称力从250kN到4000kN(含4000kN)单动高速机械式矫直压力机.特性和尺寸 |
(Machine tools; straight-sided high-speed mechanical power presses from 250 kN up to and including 4000 kN nominal force; characteristics and dimensions) |
ISO 9190-1990 |
草地和园林使用的拖拉机.牵引杆 |
(Lawn and garden ride-on (riding) tractors; drawbar) |
ISO 9191-1991 |
草地和园林使用的拖拉机.三点联结 |
(Lawn and garden ride-on (riding) tractors; three-point hitch) |
ISO 9192-1991 |
草地和园林使用的拖拉机.单点管形套筒节 |
(Lawn and garden ride-on (riding) tractors; one-point tubular sleeve hitch) |
ISO 9193-1990 |
草地和园林使用的拖拉机.动力输出 |
(Lawn and garden ride-on (riding) tractors; power take-off) |
ISO 9194-1987 |
结构设计基础.结构自重,非结构构件自重和储存材料自重的作用.密度 |
(Bases for design of structures; Actions due to the self-weight of structures, non-structural elements and stored materials; Density) |
ISO 9195-1992 |
明渠液体流量测量.砾石河床材料的取样和分析 |
(Liquid flow measurement in open channels; sampling and analysis of gravel-bed material) |
ISO 9196-1992 |
明渠液体流量测量.在结冰条件下流量测量 |
(Liquid flow measurement in open channels; flow measurements under ice conditions) |
ISO 9197-1998 |
纸、纸板和纸浆.溶水氯化物的测定 |
(Paper, board and pulps - Determination of water-soluble chlorides) |
ISO 9198-2001 |
纸、纸板和纸浆.水溶性硫酸盐含量的测定 |
(Paper, board and pulp - Determination of water-soluble sulfates) |
ISO 9199-1998 |
航空航天.类别1100MPa(在常温下)/425℃,1100MPa(在常温下)/650°C,1210MPa(在常温下)/425°C,1210MPa(在常 |
(Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 C, 1100 MPa (at ambient temperature)/650 C, 1210 MPa (at ambient temperature)/425 C, 1210 MPa (at ambient temperature)/730 C, 1550 MPa (at amb |
ISO 92-1976 |
纺织机械和附件.纺纱机.左右侧的定义 |
(Textile machinery and accessories; Spinning machinery; Definition of side (left or right)) |
ISO 920-1976 |
羊毛.使用精梳分析器测定纤维长度(巴布长度和豪特长度) |
(Wool; Determination of fibre length (barbe and hauteur) using a comb sorter) |
ISO 9200-1993 |
原油和液态石油产品.粘性烃的容积计量 |
(Crude petroleum and liquid petroleum products; volumetric metering of viscous hydrocarbons) |
ISO 9202-1991 |
珠宝.贵金属合金的纯度 |
(Jewellery; fineness of precious metal alloys) |
ISO 9203-1-1989 |
造船.船体结构零件的布局.第1部分:零件定位 |
(Shipbuilding; topology of ship hull structure elements; part 1: location of elements) |
ISO 9203-2-1989 |
造船.船体结构零件的布局.第2部分:零件的描述 |
(Shipbuilding; topology of ship hull structure elements; part 2: description of elements) |
ISO 9203-3-1989 |
造船.船体结构零件的布局.第3部分:零件间的关系 |
(Shipbuilding; topology of ship hull structure elements; part 3: relations of elements) |
ISO 9205-1988 |
用于旋转窑的耐火砖.热面的标志 |
(Refractory bricks for use in rotary kilns; hot-face identification marking) |
ISO 9206-1990 |
航空航天.恒排量液压马达.总规范 |
(Aerospace; constant displacement hydraulic motors; general specifications) |
ISO 9207-1995 |
带内燃机的手持-便携式链锯.机器噪声功率级别的测量.工程法测量 |
(Manually portable chain-saws with internal combustion engine - Determination of sound power levels - Engineering method (Grade 2)) |
ISO 9208-1989 |
铝矿石.矾含量的测定.苯甲酰苯基羟胺(BPHA)光谱分析法 |
(Aluminium ores; determination of vanadium content; BPHA spectrophotometric method) |
ISO 921-1997 |
核能.词汇 |
(Nuclear energy - Vocabulary) |
ISO 9211-1-1994 |
光学和光学仪器.光学涂层.第1部分:定义 |
(Optics and optical instruments - Optical coatings - Part 1: Definitions) |
ISO 9211-2-1994 |
光学和光学仪器.光学涂层.第2部分:光学特性 |
(Optics and optical instruments - Optical coatings - Part 2: Optical properties) |
ISO 9211-3-1994 |
光学和光学仪器.光学涂层.第3部分:环境稳定性 |
(Optics and optical instruments - Optical coatings - Part 3: Environmental durability) |
ISO 9211-4-1996 |
光学和光学仪器.光学涂层.第4部分:特定的试验方法 |
(Optics and optical instruments - Optical coatings - Part 4: Specific test methods) |
ISO 9213-1992 |
明渠中总排水量测定.使用满-渠-宽线圈电磁法 |
(Measurement of total discharge in open channels; electromagnetic method using a full-channel-width coil) |
ISO 9213-2004 |
明渠中总排量的测量.使用全渠宽线圈的电磁法 |
|
ISO 9216-2002 |
航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化六角带槽(齿形头)螺母.尺寸和质量 |
(Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses) |
ISO 9217-2002 |
航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化带埋头孔的倒角垫圈.尺寸和质量 |
(Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses) |
ISO 9218-2002 |
航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化平垫圈.尺寸和质量 |
(Aerospace - Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses) |
ISO 9219-2002 |
航空航天.滑轮用合金钢和镀镉或钛合金钢、MoS润滑或耐腐蚀钢和钝化的紧公差柄、短螺纹薄六角头螺栓.尺寸和 |
(Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS lubricated or in corrosion-resistant steel and passivated - Dimensions and masses) |
ISO 9220-1988 |
金属镀层.镀层厚度的测量.扫描电子显微镜法 |
(Metallic coatings; measurement of coating thickness; scanning electron microscope method) |