标准号 |
中文名称 |
英文名称 |
| BS EN ISO 9908-1994 |
离心泵技术规范.III类 |
(Technical specifications for centrifugal pumps - Class III) |
| BS EN ISO 9913-1-1997 |
光学和光学仪器.隐形镜片.第1部分:用FATT法对氧气渗透性和可透性的测定 |
(Optics and optical instruments - Contact lenses - Determination of oxygen permeability and transmissibility by the FATT method) |
| BS EN ISO 9913-2-2000 |
光学和光学仪器.接触镜片.用库仑法测定氧渗透性和传输性 |
(Optics and optical instruments - Contact lenses - Determination of oxygen permeability and transmissibility by the coulometric method) |
| BS EN ISO 9914-1997 |
光学及光学仪器.接触镜片.接触镜片材料折射指数的测定 |
(Optics and optical instruments - Contact lenses - Determination of refractive index of contact lens materials) |
| BS EN ISO 9917-1-2003 |
牙科用水基粘结剂.粉末/液态酸基粘结剂 |
(Dental water-based cements - Powder/liquid acid-base cements) |
| BS EN ISO 9917-2-2000 |
牙科用水基粘结剂.光敏粘结剂 |
(Dental water-based cements - Light-activated cements) |
| BS EN ISO 9919-2005 |
医用电气设备.医用脉动式血氧计的基本安全和性能的特殊要求 |
|
| BS EN ISO 9921-2003 |
人类工效学.语音通讯的评估 |
(Ergonomics - Assessment of speech communication) |
| BS EN ISO 9934-1-2001 |
无损检验.磁粉检验.一般原理 |
(Non-destructive testing - Magnetic particle testing - General principles) |
| BS EN ISO 9934-2-2002 |
无损检验.磁粉检验.碳伤媒介 |
(Non-destructive testing - Magnetic particle testing - Detection media) |
| BS EN ISO 9934-3-2002 |
无损检验.磁粉检验.设备 |
(Non-destructive testing - Magnetic particle testing - Equipment) |
| BS EN ISO 9944-1995 |
塑料.酚醛树脂.树脂萃取物电导率的测定 |
(Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts) |
| BS EN ISO 9946-1999 |
工业操纵机器人.特性表示方法 |
(Manipulating industrial robots - Presentation of characteristics) |
| BS EN ISO 9956-10-1997 |
金属材料焊接程序的批准和规范.电子束焊接程序规范 |
(Specification and approval of welding procedures for metallic materials - Welding procedure specification for electron beam welding) |
| BS EN ISO 9956-11-1997 |
金属材料焊接程序的批准和规范.激光束焊接程序规范 |
(Specification and approval of welding procedures for metallic materials - Welding procedure specification for laser beam welding) |
| BS EN ISO 9963-1-1996 |
水质.强碱性的测定.第1部分:总强碱性和混合强碱性的测定 |
(Water quality - Determination of alkalinity - Determination of total and composite alkalinity) |
| BS EN ISO 9963-2-1996 |
水质.强碱性的测定.第2部分:碳酸盐的强碱性的测定 |
(Water quality - Determination of alkalinity - Determination of carbonate alkalinity) |
| BS EN ISO 9967-1995 |
热塑性塑料管.蠕变比的测定 |
(Thermoplastics pipes - Determination of creep ratio) |
| BS EN ISO 9969-1995 |
热塑塑料管.环硬挺度的测定 |
(Thermoplastics pipes - Determination of ring stiffness) |
| BS EN ISO 9974-1-2000 |
普通和液力用连接器.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.螺纹气门 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports) |
| BS EN ISO 9974-2-2000 |
普通和液力用连接器.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(E型)弹性密封的双头螺栓 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E)) |
| BS EN ISO 9974-3-2000 |
普通和液力用连接器.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(B型)金属与金属间密封的 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)) |
| BS EN ISO 9994-2002 |
打火机的安全规范 |
(Lighters - Safety specification) |
| BS EN ISO 9997-2000 |
带麻醉剂管的牙科用注射器 |
(Dental cartridge syringes) |
| BS EN ISO 9999-2002 |
残疾人专用辅助器具.分类和术语 |
(Technical aids for persons with disabilities - Classification and terminology) |
| BS EN ISO/IEC 11172-1-1993 |
信息技术.1.5Mbit/s以内数字存储介质用移动图形和相关音频的编码.系统 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Systems) |
| BS EN ISO/IEC 11172-2-1993 |
信息技术.1.5Mbit/s以内数字存储介质用移动图像和相关音频的编码.视频 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Video) |
| BS EN ISO/IEC 11172-3-1993 |
信息技术.1.5Mbit/s以内数字存储介质用移动图像和相关音频的编码.音频 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Audio) |
| BS EN ISO/IEC 11172-4-1995 |
信息技术.1.5Mbit/s以内数字存储介质用移动图像和相关音频的编码.第4部分:性能审核试验 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Compliance testing) |
| BS EN ISO/IEC 11544-1994 |
信息技术.图像和音频信息的代码表示.先进的双级图像压缩 |
(Information technology - Coded representation of picture and audio information - Progressive bi-level image compression) |
| BS EN ISO/IEC 13818-1-1997 |
信息技术.移动图像和相关音频信息的编码.系统 |
(Information technology - Generic coding of moving pictures and associated audio information - Systems) |
| BS EN ISO/IEC 13818-3-1995 |
信息技术.移动图像和相关音频的编码.音频 |
(Information technology - Generic coding of moving pictures and associated audio information - Audio) |
| BS EN ISO/IEC 13818-9-2001 |
信息技术.移动画面和有关音频信息的一般编码.第9部分:系统译码器实时接口的扩展 |
(Information technology - Generic coding of moving pictures and associated audio information - Extension for real time interface for systems decoders) |
| BS EN ISO/IEC 15416-2002 |
信息技术.自动识别和数据获取技术.条形码印制质量检验规范.线性符号 |
(Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols) |
| BS EN ISO/IEC 15419-2002 |
信息技术.自动识别和数据采集技术.条形码数字成像和印制性能试验 |
(Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing) |
| BS EN ISO/IEC 15421-2002 |
信息技术.自动识别和数据获取技术.条形码总试验规范 |
(Information technology - Automatic identification and data capture techniques - Bar code master test specifications) |
| BS EN ISO/IEC 17000-2004 |
合格评定.词汇和一般原则 |
|
| BS EN ISO/IEC 17011-2004 |
合格评定.认证机构认证合格评定机构的一般要求 |
|
| BS EN ISO/IEC 17011-2004 |
合格评定.认证机构认证合格评定机构的一般要求 |
|
| BS EN ISO/IEC 17020-2004 |
各种检查机构运作的一般规则 |
|
| BS EN ISO/IEC 17020-2004 |
各种检查机构运作的一般规则 |
|
| BS EN ISO/IEC 17024-2003 |
合格评定.人员认证机构的一般要求 |
(Conformity Assessment - General requirements for bodies operating certification of persons) |
| BS EN ISO/IEC 17025-2000 |
试验和校准实验室能力的一般要求 |
(General requirements for the competence of testing and calibration laboratories) |
| BS EN ISO/IEC 17040-2005 |
合格评定.合格评定机构和认可机构同等评定的一般要求 |
|
| BS EN ISO/IEC 17050-1-2004 |
合格评定.供货商的合格声明.一般要求 |
|
| BS EN ISO/IEC 17050-2-2004 |
合格评定.供货商的合格声明.支持文献 |
|
| BS EN ISO/IEC 7487-1-1995 |
信息技术.以限定的频率7958次磁通变换/弧度和1.9次变换/mm(48次变换/in)在两侧调制录制的130mm(5.25in)盒式 |
(Information technology - Data interchange on 130mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides - ISO type 202 - D) |
| BS EN ISO/IEC 7498-1-1995 |
信息技术.开放系统互连.基本参考模式:基本模式 |
(Information technology. Open systems interconnection. Basic reference model. The basic model) |
| BS EN ISO/IEC 7810-1996 |
识别卡.物理特性 |
(Identification cards - Physical characteristics) |
| BS EN ISO/IEC 7811-1-1996 |
识别卡.录制技术.第1部分:压印 |
(Identification cards - Recording technique - Embossing) |
| BS EN ISO/IEC 7811-2-1996 |
识别卡.录制技术.第2部分:磁带 |
Identification cards - Recording technique - Magnetic stripe |
| BS EN ISO/IEC 7811-3-1996 |
识别卡.录制技术.第3部分:ID-1卡片压印字符的位置 |
(Identification cards - Recording technique - Location of embossed characters on ID-1 cards) |
| BS EN ISO/IEC 7811-4-1996 |
识别卡.录制技术.第4部分:只读磁道的位置.单列磁道和双列磁道 |
(Identification cards - Recording technique - Location of read-only magnetic tracks - Tracks 1 and 2) |
| BS EN ISO/IEC 7811-5-1996 |
识别卡.录制技术.第5部分:读写磁道位置.三列磁道 |
(Identification cards - Recording technique - Location of read-write magnetic track - Track 3) |
| BS EN ISO/IEC 8072-1999 |
信息技术.开放系统互连.传输服务定义 |
(Information technology. Open systems interconnection. Transport service definition) |
| BS EN ISO/IEC 9646-1-1996 |
信息技术.开放系统互连.合格测试的方法和结构.通用概念 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. General concepts) |
| BS EN ISO/IEC 9646-2-1996 |
信息技术.开放系统互连.合格测试的方法和结构.抽象试验规范 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Abstract Test Suite specification) |
| BS EN ISO/IEC 9646-4-1996 |
信息技术.开放系统互连.合格试验方法学和框架.第4部分:试验 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Test realization) |
| BS EN ISO/IEC 9646-5-1996 |
信息技术.开放系统互连.合格试验方法学和框架.第5部分:合格评定过程用试验室和试验委托人的要求 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Requirements on test laboratories and clients for the conformance assessment process) |
| BS EN ISO/IEC 9646-6-1996 |
信息技术.开放系统互连.合格测试的方法和结构.外形测试协议规范 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Protocol profile test specification) |
| BS EN ISO/IEC 9661-1997 |
信息技术.12.7mm宽盒式磁带上的数据交换.18道、每毫米1491数据字节 |
(Information technology - Data interchange on 12,7 mm wide magnetic tape cartridges - 18 tracks, 1 491 data bytes per millimetre) |
| BS EN ISO/TR 11688-2-2001 |
声学.低噪声机械和设备的设计推荐规程.低噪声设计的物理学说明 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Introduction to the physics of low-noise design) |
| BS ISO 1000-2004 |
SI单位及其倍数单位和一些其他单位应用的建议 |
|
| BS ISO 10002-2004 |
质量管理.用户满意度.机构中投诉处理指南 |
|
| BS ISO 10002-2004 |
质量管理.用户满意度.机构中投诉处理指南 |
|
| BS ISO 10005-1996 |
质量管理.质量计划导则 |
Quality management - Guidelines for quality plans |
| BS ISO 10005-2005 |
质量管理体系.质量计划指南 |
|
| BS ISO 10006-1998 |
质量管理.项目质量管理指南 |
Quality management - Guidelines to quality in project management |
| BS ISO 10006-2003 |
质量管理体系.项目的质量管理导则 |
(Quality management systems - Guidelines for quality management in projects) |
| BS ISO 10007-2003 |
质量管理体系.技术状态管理指南 |
(Quality management systems - Guidelines for configuration management) |
| BS ISO 10012-2-1997 |
测量设备的质量保证.测量过程控制导则 |
Quality assurance for measuring equipment - Guidelines for control of measurement processes |
| BS ISO 10015-2000 |
质量管理.培训导则 |
Quality management - Guidelines for training |
| BS ISO 10019-2005 |
质量管理体系顾问的选择和享受其所提供服务的导则 |
|
| BS ISO 10044-1997 |
银行和有关的财务服务设施.信息交流.押汇信用证形式 |
Banking and related financial services. Information interchange. Documentary credit form |
| BS ISO 10045-1993 |
高山雪橇.紧固安装部位.试验螺钉的要求 |
Alpine skis - Binding mounting area - Requirements for test screws |
| BS ISO 10054-1998 |
内燃压燃式发动机.稳定状态下发动机运转产生烟雾的测量仪器.过滤型烟雾计 |
Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter type smokemeter |
| BS ISO 10056-2001 |
机械振动.铁路车辆里乘客和乘务员全身振动的测量和分析 |
Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| BS ISO 10059-2-2004 |
致密、定型耐火制品.冷压强度测定.有热片试验 |
|
| BS ISO 1007-2000 |
摄影技术.135号胶卷暗盒.规范 |
Photography - 135-size film and magazine - Specifications |
| BS ISO 10071-1-2001 |
压印工具.球锁式冲压.轻载的球锁式冲压 |
Tools for pressing - Ball-lock punches - Ball-lock punches for light duty |
| BS ISO 10071-2-2005 |
冲压工具.球形锁紧冲床.用于重载荷的球形锁紧冲床 |
|
| BS ISO 10072-2004 |
模铸工具.浇口套.尺寸 |
|
| BS ISO 1008-1995 |
摄影技术.相纸尺寸.单张相纸 |
Photography - Paper dimensions - Pictorial sheets |
| BS ISO 10081-1-2003 |
致密定型耐火制品的分类.硅酸铝 |
(Classification of dense shaped refractory products - Alumina-silica) |
| BS ISO 10081-2-2003 |
致密定型耐火制品的分类.含残留碳小于7%的碱性制品 |
(Classification of dense shaped refractory products - Basic products containing less than 7 % residual carbon) |
| BS ISO 10081-3-2003 |
致密定型耐火制品的分类.含残留碳7%-50%的碱性制品 |
(Classification of dense shaped refractory products - Basic products containing from 7 % to 50 % residual carbon) |
| BS ISO 10086-2-2004 |
煤.选煤用絮凝剂评价方法.旋转真空过滤设备中作为助滤剂的絮凝剂 |
|
| BS ISO 10086-2-2004 |
煤.选煤用絮凝剂评价方法.旋转真空过滤设备中作为助滤剂的絮凝剂 |
|
| BS ISO 1009-2001 |
摄影技术.相纸尺寸.印相机用卷纸 |
Photography - Paper dimensions - Rolls for printers |
| BS ISO 10099-2001 |
气压液动.气液缸.最终检验和验收标准 |
Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
| BS ISO 10100-2001 |
液压传动.液压缸.验收试验 |
Hydraulic fluid power - Cylinders - Acceptance tests |
| BS ISO 10102-2001 |
螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度 |
Assembly tools for screws and nuts - Double-headed open-ended engineers` wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10103-2001 |
螺钉和螺母用装配工具.双头平直和弯头套筒扳手.扳手长度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10104-2001 |
螺钉和螺母用装配工具.双头高弯头和改进的弯头套筒扳手.扳手长度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10109-1-1995 |
光学和光学仪表.环境要求.通用信息,定义,气候带及其参数 |
Optics and optical instruments - Environmental requirements - General information, definitions, climatic zones and their parameters |
| BS ISO 10109-11-2001 |
光学和光学仪器.环境要求.户外条件下使用的光学仪器 |
Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use |
| BS ISO 10109-12-2004 |
光学和光学仪器.环境要求.光学仪器的运输条件 |
|
| BS ISO 10109-4-2001 |
光学和光学仪器.环境要求.望远镜系统的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for telescopic systems |
| BS ISO 10109-6-1995 |
光学和光学仪表.环境要求.医用光学装置的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for medical optical devices |
| BS ISO 10109-7-2002 |
光学和光学仪器的环境要求.光学测量仪器的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments |
| BS ISO 10109-8-1995 |
光学和光学仪表.环境要求.使用极端条件的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use |
| BS ISO 10110-1-1996 |
光学及光学仪器.光学件和系统图形的制备.第1部分:总则 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - General |
| BS ISO 10110-10-1996 |
光学及光学仪器.光学件和系统图形的制备.第10部分:表示数据表 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Table representing data of a lens element |
| BS ISO 10110-11-1996 |
光学及光学仪器.光学件和系统图形的制备.第11部分:不容许数据 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Non-toleranced data |
| BS ISO 10110-12-1997 |
光学及光学仪器.光学件和系统图形的制备.第12部分:非球面形表面 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Aspheric surfaces |
| BS ISO 10110-13-1998 |
光学和光学仪器.光学件和系统图形的制备.第13部分:激光辐射损坏阈 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold |
| BS ISO 10110-14-2003 |
光学和光学仪器.光学件和系统制图准备.波前变形公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Wavefront deformation tolerance) |
| BS ISO 10110-17-2004 |
光学和光学仪器.光学件和系统制图准备.激光辐射损害阈 |
|
| BS ISO 10110-2-1996 |
光学及光学仪器.光学件和系统图形的制备.第2部分:材料不完全性.应力双折射 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Stress birefringence |
| BS ISO 10110-3-1996 |
光学及光学仪器.光学件和系统图形的制备.第3部分:材料不完全性.气泡和杂质 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Bubbles and inclusions |
| BS ISO 10110-4-1997 |
光学及光学仪器.光学件和系统图形的制备.第4部分:不完备材料的不均匀性和擦痕 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Inhomogeneity and striae |
| BS ISO 10110-5-1996 |
光学及光学仪器.光学件和系统图形的制备.第5部分:表面形状公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface form tolerances |
| BS ISO 10110-6-1996 |
光学及光学仪器.光学件和系统图形的制备.第6部分:定中心公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Centring tolerances |
| BS ISO 10110-7-1996 |
光学及光学仪器.光学件和系统图形的制备.第7部分:表面缺陷公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface imperfection tolerances |
| BS ISO 10110-8-1998 |
光学及光学仪器.光学件和系统图形的制备.表面纹理 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface texture |
| BS ISO 10110-9-1996 |
光学及光学仪器.光学件和系统图形的制备.第9部分:表面处理和涂层 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating |
| BS ISO 10119-2002 |
碳纤维.测定密度 |
Carbon fibre - Determination of density |
| BS ISO 1012-1999 |
摄影技术.普通软片和胶卷.尺寸 |
Photography - Films in sheets and rolls for general use - Dimensions |
| BS ISO 10126-1-1992 |
银行业务.电文加密(大批)程序.第1部分:一般原则 |
Banking - Procedures for message encipherment (wholesale) - General principles |
| BS ISO 10126-2-1992 |
银行业务.第2部分:信息编码程序(大规模).DEA算法 |
Banking - Procedures for message encipherment (wholesale) - DEA algorithm |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com