标准号 |
中文名称 |
英文名称 |
EN ISO 11126-8-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的技术要求第8部分:橄榄石砂 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993) |
EN ISO 11127-1-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第1部分:抽样 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993) |
EN ISO 11127-2-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第2部分:颗粒尺寸分布的测定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993) |
EN ISO 11127-3-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第3部分:表观密度测定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993) |
EN ISO 11127-4-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第4部分:通过玻璃载片试验评定硬度 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993) |
EN ISO 11127-5-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第5部分:含水量测定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993) |
EN ISO 11127-6-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第6部分:通过测量电导率测定水溶性杂质 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993) |
EN ISO 11127-7-1997 |
涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第7部分:水溶性氯化物的测定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993) |
EN ISO 11130-1999 |
金属与合金的腐蚀盐溶液中的交替浸入试验 |
Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999) |
EN ISO 11143-1999 |
牙科设备汞齐合金分离器 |
Dental equipment - Amalgam separators (ISO 11143:1999) |
EN ISO 11144-1996 |
牙科设备供水及排水管接头 |
Dental equipment - Connections for supply and waste lines (ISO 11144:1995) |
EN ISO 11145-2001 |
光学和光学仪器激光和激光设备词汇和符号 |
Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2001) |
EN ISO 11146-1999 |
激光和激光设备激光束参数的试验方法束宽、发散角和束扩散因子 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999) |
EN ISO 11149-1997 |
光学和光学仪器激光和激光设备非电信激光设备用光纤连接器 |
Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser applications (ISO 11149:1997) |
EN ISO 11151-1-2000 |
激光和激光设备标准光学件第1部分:紫外线、可见和近红外光谱范围用件 |
Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral range (ISO 11151-1:2000) |
EN ISO 11151-2-2000 |
激光和激光设备标准光学件第2部分:红外光谱范围用件 |
Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000) |
EN ISO 1119-2002 |
产品几何量技术规范(GPS)锥度和锥度角系列 |
Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998) |
EN ISO 11196-1997 |
麻醉气体监视器(包括技术勘误1) |
Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997) |
EN ISO 11197-2004 |
医疗供电设备 |
|
EN ISO 11199-1-1999 |
双臂操作的助步器要求和试验方法第1部分:步行支架 |
Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999) |
EN ISO 11199-2-1999 |
双臂操作的助步器要求和试验方法第2部分:滚动器 |
Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999) |
EN ISO 1120-2002 |
输送带机械接头的强度测定静态试验法 |
Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002) |
EN ISO 11203-1995 |
声学机器和设备发射的噪声从声功率级测定工作位置和其他指定位置发射声压级 |
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
EN ISO 11210-1995 |
铂合金首饰中含铂量的测定氯铂酸铵沉淀后重量法 |
Determination of platinum in platinum jewellery alloys - Gravimetric method after precipation of diammonium hexachloroplatinate (ISO 11210:1995) |
EN ISO 11212-1-1997 |
淀粉和淀粉制品重金属含量第1部分:用原子吸收光谱法测定砷含量 |
Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997) |
EN ISO 11212-2-1997 |
淀粉和淀粉制品重金属含量第2部分:用原子吸收光谱法测定汞含量 |
Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997) |
EN ISO 11212-3-1997 |
淀粉和淀粉制品重金属含量第3部分:用电热原子化原子吸收光谱法测定铅含量 |
Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997) |
EN ISO 11212-4-1997 |
淀粉和淀粉制品重金属含量第4部分:用电热原子化原子吸收光谱法测定镉含量 |
Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997) |
EN ISO 11213-1995 |
改良淀粉乙酰基含量的测定酶催化法 |
Modified starch - Determination of acetyl content - Enzymatic method (ISO 11213:1995) |
EN ISO 11214-1996 |
改良淀粉氧化淀粉中羟基团含量的测定 |
Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996) |
EN ISO 11215-1998 |
改良淀粉乙酰二淀粉和已二酸酯中已二酸含量的测定气相色谱法 |
Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (ISO 11215:1998) |
EN ISO 11216-1998 |
改良淀粉羧甲基淀粉中羧甲基团含量的测定 |
Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998) |
EN ISO 11244-1999 |
牙科钎焊包埋料 |
Dental brazing investments (ISO 11244:1998) |
EN ISO 11245-2000 |
牙齿修复磷酸盐结合剂耐火模铸材料 |
Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999) |
EN ISO 11246-1998 |
牙科硅酸乙脂结合剂铸造包埋材料 |
Dental ethyl silicate bonded casting investments (ISO 11246:1996) |
EN ISO 11248-1999 |
塑料热固性模塑料温升时短暂性能的评价 |
Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures(ISO 11248:1993) |
EN ISO 11254-1-2000 |
激光和激光设备光学表面激光导致损伤阈值的测定第1部分:1-on-1试验 |
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000) |
EN ISO 11254-2-2001 |
激光和激光设备光学表面激光导致损伤阈值的测定第2部分:S on 1试验 |
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S on 1 test (ISO 11254-2:2001) |
EN ISO 1127-1996 |
不锈钢管尺寸、公差和单位长度的公称质量 |
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
EN ISO 11290-1-1996 |
食品和动物饲料的微生物学单核细胞增生性利斯特氏菌检测和计数的水平方法第1部分:检测方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 1: Detection method (ISO 11290-1:1996) |
EN ISO 11290-1-2004 |
食品和动物饲料的微生物学.单核细胞增生性利斯特氏菌检测和计数的水平方法.第1部分:检测方法 |
|
EN ISO 11290-1/prA1-2002 |
食品和动物饲料的微生物学单核细胞增生性利斯特氏菌检测和计数的水平方法第1部分:检测方法修改1:改 |
Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 1: Detection method; Amendment 1: Modification of the isolation media, of the haemolysis test and inclusion of precision |
EN ISO 11290-2-1998 |
食品和动物饲料的微生物学单核细胞增生性利斯特氏菌检测和计数的水平方法第2部分:计数方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method (ISO 11290-2:1998) |
EN ISO 11290-2-2004 |
食品和动物饲料的微生物学.单核细胞增生性利斯特氏菌检测和计数的水平方法.第2部分:计数方法 |
|
EN ISO 11290-2/prA1-2002 |
食品和动物饲料的微生物学单核细胞增生性利斯特氏菌检测和计数的水平方法第2部分:计数方法修改1:改 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method; Amendment 1: Modification of the isolation medium (ISO 11290-2:1998/DAM 1:2002) |
EN ISO 11306-1998 |
金属与合金的腐蚀对海水表面的金属和合金的暴露和评估准则 |
Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998) |
EN ISO 1133-1999 |
塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MFR)的测定 |
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:1997) |
EN ISO 11334-1-1997 |
用胳膊操作的助步器要求和试验方法第1部分:肘支撑器 |
Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:1994) |
EN ISO 11334-4-1999 |
用胳膊操作的助步器要求和试验方法第4部分:具有三条或多于三条腿支撑的步行器扶杖 |
Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999) |
EN ISO 11337-2004 |
塑料.聚酰胺.气相色谱法测定ε-己内酰胺和ω-月桂酰 |
|
EN ISO 11341-1997 |
色漆和清漆人工老化和人工辐射照射氙弧灯照射 |
Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:1994) |
EN ISO 11341-2004 |
色漆和清漆.模拟气候及模拟辐射曝晒.氙弧灯曝晒 |
|
EN ISO 11348-1-1998 |
水质水样对弧菌类光发射抑制影响的测定(发光细菌试验)第1部分:使用新制备细菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:1998) |
EN ISO 11348-2-1998 |
水质水样对弧菌类光发射抑制影响的测定(发光细菌试验)第2部分:使用干细菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:1998) |
EN ISO 11348-3-1998 |
水质水样对弧菌类光发射抑制影响的测定(发光细菌试验)第3部分:使用冻干细菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:1998) |
EN ISO 11357-1-1997 |
塑料差示扫描量热法(DSC)第1部分:一般原则 |
Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:1997) |
EN ISO 11358-1997 |
塑料高聚物的热重分析法(TG)一般原则 |
Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
EN ISO 11369-1997 |
水质选择性植物处理剂的测定固液萃取紫外检测高效液相色谱法 |
Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997) |
EN ISO 11376-2001 |
塑料环氧树脂和缩水甘油基酯无机氯的测定 |
Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO 11376:1997) |
EN ISO 11378-2-2001 |
纺织地板覆盖物实验室弄脏试验第2部分:转鼓试验 |
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001) |
EN ISO 11380-1996 |
光学和光学仪器眼科光学成形器 |
Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994) |
EN ISO 11381-1996 |
光学和光学仪器眼科光学螺纹 |
Optics and optical instruments - Ophthalmic optics - Screw threads (ISO 11381:1994) |
EN ISO 11399-2000 |
热环境人类工效学相关国际标准的原则与应用 |
Ergonomics of the thermal environment - Principles and application of relevant International Standards (ISO 11399:1995) |
EN ISO 11401-1998 |
塑料酚醛树脂用液相色谱法分离 |
Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993) |
EN ISO 11402-1998 |
塑料综合树脂游离甲醛的测定 |
Plastics - Condensation resins - Determination of free formaldehyde (ISO 11402:1993) |
EN ISO 11403-1-2003 |
塑料可比多点数据的采集和表示第1部分:机械性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001) |
EN ISO 11403-2-1999 |
塑料可比多点数据的采集和表示第2部分:热和加工性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995) |
EN ISO 11403-2-2004 |
塑料.可比多点数据的采集和表示.第2部分:热性能和加工性能 |
|
EN ISO 11403-3-2001 |
塑料可比多点数据的采集和表示第3部分:环境对性能的影响 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999) |
EN ISO 11409-1998 |
塑料酚醛树脂用差示扫描量热法测定反应热及温度 |
Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993) |
EN ISO 11426-1998 |
金合金首饰中含金量的测定灰吹法(火试金法) |
Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:1997) |
EN ISO 11431-2002 |
房屋建筑密封胶受热、接触水和透过玻璃暴露于人造光后密封胶的粘合性的测定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
EN ISO 11432-1997 |
房屋建筑密封胶耐压性的测定 |
Building construction - Sealants - Determination of resistance to compression (ISO 11432:1993) |
EN ISO 11439-2000 |
气瓶车上贮存机动车用天然气燃料用高压气瓶 |
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000) |
EN ISO 11442-1-1996 |
技术产品文件计算机技术信息处理第1部分:安全要求 |
Technical product documentation - Handling of computer-based technical information - Part 1: Security requirements (ISO 11442-1:1993) |
EN ISO 11442-2-1996 |
技术产品文件计算机技术信息处理第2部分:原始文献 |
Technical product documentation - Handling of computer-based technical information - Part 2: Original documentation (ISO 11442-2:1993) |
EN ISO 11442-3-1996 |
技术产品文件计算机技术信息处理第3部分:产品设计过程的阶段 |
Technical product documentation - Handling of computer-based technical information - Part 3: Phases in the product design process (ISO 11442-3:1993) |
EN ISO 11442-4-1996 |
技术产品文件计算机技术信息处理第4部分:文献管理和检索系统 |
Technical product documentation - Handling of computer-based technical information - Part 4: Document management and retrieval systems (ISO 11442-4:1993) |
EN ISO 11446-2002 |
乘用车和具有12伏电压系统的轻型商用车牵引车和挂车之间的13极连接器的尺寸和接头的分布 |
Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation (ISO 11446:1995 and Amd. 1:1997) / Note: To be replaced by prEN ISO 11446 (2003-10). |
EN ISO 11468-1999 |
塑料试验用聚氯乙烯糊料的制备溶解方法 |
Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997) |
EN ISO 11469-2000 |
塑料塑料产品的一般鉴定和标志 |
Plastics - Generic identification and marking of plastics products (ISO 11469:2000) |
EN ISO 11489-1995 |
铂合金首饰中含铂量的测定氯化汞还原重量法 |
Determination of platinum in platinum jewellery alloys - Gravimetric determination by reduction with mercury(I) chloride (ISO 11489:1995) |
EN ISO 11490-1995 |
钯合金首饰中含钯量的测定丁二酮肟重量法 |
Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime (ISO 11490:1995) |
EN ISO 11498-1999 |
牙科手机牙科用低压电动机 |
Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
EN ISO 11499-1999 |
局部麻醉用注射针管 |
Dental cartridges for local anaesthetics (ISO 11499:1997) |
EN ISO 11501-2004 |
塑料.薄膜和薄板.加热尺寸变化的测定 |
|
EN ISO 11507-2001 |
色漆和清漆涂层在设备中人工老化UV荧光和水的老化 |
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997) |
EN ISO 11539-1999 |
眼科光学隐形眼镜隐形眼镜和隐形眼镜材料的分类 |
Ophthalmic optics - Contact lenses - Classification of contact lenses and contact lens materials (ISO 11539:1999) |
EN ISO 11541-2002 |
天然气高压下含水量的测定/注:认可通知 |
Natural gas - Determination of water content at high pressure (ISO 11541:1997) |
EN ISO 11542-1-2001 |
塑料超高分子量聚乙烯(PE-UHMW)模塑和挤塑材料第1部分:命名系统和基本规范 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001) |
EN ISO 11542-2-1998 |
塑料超高分子量聚乙烯(PE-UHMW)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998) |
EN ISO 11543-2002 |
改良淀粉羟丙基含量的测定质子核磁共振光谱测定法(NMR) |
Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000) |
EN ISO 11545-2001 |
农业排灌设备有喷嘴和喷雾嘴的横向移动排灌机械和中心轴分配水的均匀性的测定 |
Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001) |
EN ISO 11546-1-1995 |
声学隔声罩隔声性能的测定第1部分:实验室测量(作说明用) |
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
EN ISO 11546-2-1995 |
声学隔声罩隔声性能的测定第2部分:现场测量(验收和鉴定用) |
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
EN ISO 11551-1997 |
光学和光学仪器激光和激光设备光学激光组件光吸收性试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:1997) |
EN ISO 11554-2003 |
光学和光学仪器激光和激光设备激光束功率、能量和时间特征的试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003) |
EN ISO 11562-1997 |
产品几何量技术规范(GPS)表面特征:轮廓法相位校正过滤器的计量特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996) |
EN ISO 1157-1999 |
塑料稀溶液中的乙酸纤维粘度值和粘度率的测定 |
Plastics - Cellulose acetate in dilute solution - Determination of viscosity number and viscosity ratio (ISO 1157:1990) |
EN ISO 1158-1998 |
塑料 氯乙烯均聚物和共聚物 氯含量的测定 |
Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998) |
EN ISO 11591-2000 |
发动机驱动小艇操舵部位的视野 |
Small craft, engine-driven - Field of vision from helm position (ISO 11591:2000) |
EN ISO 11592-2001 |
外壳小于8m长的小艇最大推力的测定 |
Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001) |
EN ISO 11593-1997 |
操作型工业机器人末端执行器自动更换系统词汇和特性表示 |
Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996) |
EN ISO 11606-2001 |
船舶与海上技术船用电磁罗经 |
Ships and marine technology - Marine electromagnetic compasses (ISO 11606:2000) |
EN ISO 11608-1-2000 |
医用笔试注射器第1部分:笔式注射器要求和试验方法 |
Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods (ISO 11608-1:2000) |
EN ISO 11608-2-2000 |
医用笔试注射器第2部分:针头要求和试验方法 |
Pen-injectors for medical use - Part 2: Needles; Requirements and test methods (ISO 11608-2:2000) |
EN ISO 11608-3-2000 |
医用笔试注射器第3部分:注射器盒要求和试验方法 |
Pen-injectors for medical use - Part 3: Finished cartridges; Requirements and test methods (ISO 11608-3:2000) |
EN ISO 11609-1998 |
牙科学牙膏要求、试验方法和标志 |
Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995) |
EN ISO 11623-2002 |
可运输气瓶复合气瓶的周期性检测和试验 |
Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002) |
EN ISO 1163-1-1999 |
塑料 未增塑聚氯乙烯 (PUC-U)模塑和挤塑材料 第1部分:命名系统和基本规范 |
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995) |
EN ISO 1163-2-1999 |
塑料 未增塑聚氯乙烯均聚物和共聚物的化合物 第2部分:试样的制备和性能的测定 |
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995) |
EN ISO 11640-1998 |
皮革色牢度试验耐周期性往复摩擦的色牢度 |
Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:1993) |
EN ISO 11641-2003 |
皮革 色牢度试验 耐汗渍色牢度 |
Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:1993) |
EN ISO 11642-1998 |
皮革色牢度试验耐水洗的色牢度 |
Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993) |
EN ISO 11643-1998 |
皮革色牢度试验小样品耐干洗溶液的色牢度 |
Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions (ISO 11643:1993) |
EN ISO 11644-2003 |
皮革 涂层粘牢度试验 |
Leather - Test for adhesion of finish (ISO 11644:1993) |
EN ISO 11646-1998 |
皮革面积的测量 |
Leather - Measurement of area (ISO 11646:1993) |
EN ISO 11654-1997 |
声学建筑用吸声装置吸声定标 |
Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
EN ISO 11667-1999 |
纤维增强塑料模塑料和预浸料树脂、增强纤维和矿物质填料含量的测定溶解法 |
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997) |
EN ISO 11668-2001 |
色漆和清漆用粘合剂氯化聚合物树脂通用试验方法 |
Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997) |