标准号 |
中文名称 |
英文名称 |
EN ISO 8502-4-1999 |
涂装油漆和有关产品前钢材预处理表面清洁度的评定试验第4部分:油覆前凝露可能性的评定导则 |
Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993) |
EN ISO 8502-6-1999 |
涂装油漆和有关产品前钢材预处理表面清洁度的评定试验第6部分:分析用可溶性杂质的提取 Bresle法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995) |
EN ISO 8502-9-2000 |
涂装油漆和有关产品前钢材预处理表面清洁度的评定试验第9部分:水溶性盐的现场电导测定法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998) |
EN ISO 8503-1-1995 |
涂装油漆和有关产品前钢材预处理喷射清理钢材的表面粗糙度特性第1部分:磨料喷射清理表面粗糙度的ISO评 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr |
EN ISO 8503-2-1995 |
涂装油漆和有关产品前钢材预处理喷射清理钢材的表面粗糙度特性第2部分:磨料喷射清理表面粗糙度的定级 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce |
EN ISO 8503-3-1995 |
涂装油漆和有关产品前钢材预处理喷射清理钢材的表面粗糙度特性第3部分:ISO表面轮廓比较仪的校准方法和 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
EN ISO 8503-4-1995 |
涂装油漆和有关产品前钢材预处理喷射清理钢材的表面粗糙度特性第4部分:ISO表面轮廓比较仪的校准方法和 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
EN ISO 8504-1-2001 |
涂装油漆和有关产品前钢材预处理表面预处理方法第1部分:总则 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
EN ISO 8504-2-2001 |
涂装油漆和有关产品前钢材预处理表面预处理方法第2部分:磨料喷射清理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
EN ISO 8504-3-2001 |
涂装油漆和有关产品前钢材预处理表面预处理方法第3部分:手工和动力工具清洗 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993) |
EN ISO 8536-1-2003 |
医用输液器具第1部分:玻璃输液瓶 |
Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2000) |
EN ISO 8536-2-2002 |
医用输液器具第2部分:输液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001) |
EN ISO 8536-8-2004 |
医用输液器具.第8部分:有压力输液仪的输液器具 |
|
EN ISO 8560-1999 |
技术制图建筑工程制图模数尺寸图、图线和网格的画法 |
Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986) |
EN ISO 8561-1995 |
家用无霜制冷设备冷藏箱、冷冻冷藏柜、冷冻食品储藏柜和强力空气循环冷却的食品冷藏柜特性和试验方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995) |
EN ISO 8565-1995 |
金属与合金大气腐蚀试验野外试验的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992) |
EN ISO 8580-1995 |
橡胶与塑料软管稳定状态下耐紫外线的测定 |
Rubber and plastic hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) |
EN ISO 8596-1996 |
眼科光学视觉敏锐度测验标准验光字体及其演示 |
Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994) |
EN ISO 8597-1996 |
光学与光学仪器视觉敏锐度测验与验光字体相关的方法 |
Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995) |
EN ISO 8598-1998 |
光学与光学仪器焦距计 |
Optics and optical instruments - Focimeters (ISO 8598:1996) |
EN ISO 8599-1996 |
光学与光学仪器隐形眼镜光谱和光透射率的测定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994) |
EN ISO 8611-1-2004 |
物料搬运用托盘.平托盘.第1部分:试验方法 |
|
EN ISO 8612-2001 |
眼科仪器张力计 |
Ophthalmic instruments - Tonometers (ISO 8612:2001) |
EN ISO 8618-1998 |
塑料液态酚醛树脂非挥发性物质的常规测定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995) |
EN ISO 8619-1998 |
塑料酚醛树脂粉在加热玻璃盘上流动距离的测定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:1995) |
EN ISO 862-1995 |
表面活性剂词汇三种语言版 |
Surface active agents - Vocabulary - Trilingual version (ISO 862:1984/Cor. 1:1993) |
EN ISO 8620-1995 |
塑料酚醛树脂粉筛析用喷气筛设备进行过滤分析 |
Plastics - Phenolic resin powder - Sieve analysis - Sieve analysis using air-jet sieve apparatus (ISO 8620:1986) |
EN ISO 8624-2002 |
眼科光学眼镜架测量系统与术语 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002) |
EN ISO 8655-1-2002 |
活塞操纵的容量设备第1部分:术语、一般要求与用户建议 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommandations (ISO 8655-1:2002) |
EN ISO 8655-2-2002 |
活塞操纵的容量设备第2部分:活塞吸液管 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002) |
EN ISO 8655-3-2002 |
活塞操纵的容量设备第3部分:活塞量管 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002) |
EN ISO 8655-4-2002 |
活塞操纵的容量设备第4部分:稀释器 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002) |
EN ISO 8655-5-2002 |
活塞操纵的容量设备第5部分:分配器 |
Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002) |
EN ISO 8655-6-2002 |
活塞操纵的容量设备第6部分:判定测量误差的重量分析法 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002) |
EN ISO 8662-10-1998 |
便携式手提动力工具手柄振动测量第10部分:冲剪与剪切 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998) |
EN ISO 8662-12-1997 |
便携式手提动力工具手柄振动测量第12部分:往复式锯和锉以摆动或旋转式锯 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997) |
EN ISO 8662-13-1997 |
便携式手提动力工具手柄振动测量第13部分:模具研磨机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997) |
EN ISO 8662-14-1996 |
便携式手提动力工具手柄振动测量第14部分:采石工具和针束除锈机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996) |
EN ISO 8662-2/prA2-2000 |
便携式手提动力工具手柄振动测量第2部分:凿锤和铆钉锤修改2 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers; Amendment 2 (ISO 8662-2:1992/AMD 1:1999) |
EN ISO 8662-3/prA2-2000 |
便携式手提动力工具手柄振动测量第3部分:岩石钻头和旋转锤修改2 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers; Amendment 2 (ISO 8662-3:1992/AMD 1:1999) |
EN ISO 8662-4-1995 |
便携式手提动力工具手柄振动测量第4部分:磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994) |
EN ISO 8662-6-1995 |
便携式手提动力工具手柄振动测量第6部分:冲击钻 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994) |
EN ISO 8662-7-1997 |
便携式手提动力工具手柄振动测量第7部分:具有冲击、脉冲或棘轮作用力的扳手、螺丝刀和拧螺母机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997) |
EN ISO 8662-8-1997 |
便携式手提动力工具手柄振动测量第8部分:抛光机和旋转式轨道和特殊轨道磨光机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
EN ISO 8662-9-1996 |
便携式手提动力工具手柄振动测量第9部分:汽锤 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996) |
EN ISO 8666-2002 |
小艇主要数据 |
Small craft - Principal data (ISO 8666:2002) |
EN ISO 8669-2-1996 |
尿收集袋第2部分:要求与测试方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996) |
EN ISO 8670-2-1996 |
造口术收集袋第2部分:要求和测试方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996) |
EN ISO 8673-2000 |
六角螺母,1型米制细牙螺纹产品等级A和B级 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999) |
EN ISO 8674-2000 |
六角螺母,2型米制细牙螺纹产品等级A和B级 |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999) |
EN ISO 8675-2000 |
六角薄螺母(倒角)米制细牙螺纹产品等级A和B级 |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999) |
EN ISO 8676-2000 |
米制细牙六角头螺钉产品等级A和B级 |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999) |
EN ISO 868-2003 |
塑料与硬质橡胶用硬度计测定压痕硬度[肖氏(SHORE)硬度] |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN ISO 8689-1-2000 |
水质江河中生物的分类第1部分:对底栖微型无脊椎动物调查的生物质量数据的解释方法指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000) |
EN ISO 8689-2-2000 |
水质江河中生物的分类第2部分:对底栖微型无脊椎动物调查的生物质量数据的表示方法指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000) |
EN ISO 8692-2004 |
水质.用单细胞绿藻进行淡水藻类生长抑制性试验 |
|
EN ISO 8728-1998 |
船舶与海上技术船用陀罗罗经 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997) |
EN ISO 8729-1998 |
船舶与海上技术船用雷达反射器 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997) |
EN ISO 8733-1997 |
不淬硬钢或奥氏体不锈钢内螺纹圆柱销 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997) |
EN ISO 8734-1997 |
淬硬钢和马氏体不锈钢(定位销)圆柱销 |
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
EN ISO 8735-1997 |
淬硬钢或马氏体不锈钢内螺纹圆柱销 |
Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997) |
EN ISO 8739-1997 |
槽销带导杆及全长平行沟槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997) |
EN ISO 8740-1997 |
槽销带倒角及全长平行沟槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997) |
EN ISO 8741-1997 |
槽销半长倒锥槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997) |
EN ISO 8742-1997 |
槽销中部槽长为1/3全长 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997) |
EN ISO 8743-1997 |
槽销中部槽长为1/2全长 |
Grooved pins - Half-length centre grooved (ISO 8743:1997) |
EN ISO 8744-1997 |
槽销全长锥槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997) |
EN ISO 8745-1997 |
槽销半长锥槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997) |
EN ISO 8746-1997 |
圆头槽销 |
Grooved pins with round head (ISO 8746:1997) |
EN ISO 8747-1997 |
沉头槽销 |
Grooved pins with countersunk head (ISO 8747:1997) |
EN ISO 8748-1997 |
弹性圆柱销卷制、重型 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997) |
EN ISO 8750-1997 |
弹性圆柱销卷制、标准型 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997) |
EN ISO 8751-1997 |
弹性圆柱销卷制、轻型 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997) |
EN ISO 8752-1997 |
弹性圆柱销开槽、重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997) |
EN ISO 8754-2003 |
石油产品含硫量的测定非扩散型X-射线荧光光谱法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence spectrometry (ISO 8754:2003) |
EN ISO 8765-2000 |
米制细牙六角头螺栓产品等级A和B级 |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) |
EN ISO 877-1996 |
塑料玻璃板下日光暴晒耐老化及性能测定 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
EN ISO 8780-1-1995 |
颜料和体质颜料评定分散性的分散方法第1部分:综述 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990) |
EN ISO 8780-2-1995 |
颜料和体质颜料评定分散性的分散方法第2部分:用振荡机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990) |
EN ISO 8780-3-1995 |
颜料和体质颜料评定分散性的分散方法第3部分:用高速粉碎机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990) |
EN ISO 8780-4-1995 |
颜料和体质颜料评定分散性的分散方法第4部分:用压研磨机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990) |
EN ISO 8780-5-1995 |
颜料和体质颜料评定分散性的分散方法第5部分:用自动研磨机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990) |
EN ISO 8780-6-1995 |
颜料和体质颜料评定分散性的分散方法第6部分:用三辕研磨机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990) |
EN ISO 8781-1-1995 |
颜料和体质颜料分散性评定方法第1部分:有色颜料着色力变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990) |
EN ISO 8781-2-1995 |
颜料和体质颜料分散性评定方法第2部分:磨碎细度变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990) |
EN ISO 8781-3-1995 |
颜料和体质颜料分散性评定方法第3部分:光泽变化评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990) |
EN ISO 8785-1999 |
产品几何量技术规范(GPS)表面缺陷术语、定义和参数 |
Geometrical product specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
EN ISO 8795-2001 |
人类生活用水输送用塑料管道系统迁移评定塑料管道迁移值的测定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001) |
EN ISO 8799-1995 |
表面活性剂乙氧基化醇和烷基酚硫酸盐未硫酸化物含量的测定 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988) |
EN ISO 8819-1995 |
液化石油气硫化氢的测定乙酸铅法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993) |
EN ISO 8826-1-1995 |
技术制图滚动轴承第1部分:通用简化画法 |
Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989) |
EN ISO 8847-2004 |
小艇.操舵装置.钢索和滑轮系统 |
|
EN ISO 8849-2003 |
小艇 电动直流舱底泵 |
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
EN ISO 887-2000 |
米制普通螺栓、螺钉和螺母用平垫圈总方案 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) |
EN ISO 8871-1-2004 |
非肠道及制药设备用弹性件.第1部分:水蒸汽中的提取物 |
|
EN ISO 8871-2-2004 |
非肠道及制药设备用弹性件.第2部分:识别和表征 |
|
EN ISO 8871-3-2004 |
非肠道及制药设备用弹性件.第3部分:释放粒子计数的测定 |
|
EN ISO 8872-2003 |
输血、输液和注射瓶铝盖 一般要求和试验方法 |
Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003) |
EN ISO 8891-2000 |
贵金属含量至少为25%但不低于75%的牙科用铸造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998) |
EN ISO 8892-1995 |
油料饼粕残留已烷总量的测定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987) |
EN ISO 8968-1-2001 |
牛奶含氮量的测定第1部分:凯氏法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001) |
EN ISO 8968-2-2001 |
牛奶含氮量的测定第2部分:分段溶解法(宏观法) |
Milk - Determination of nitrogen content - Part 2: Block digestion method (Macro method) (ISO 8968-2:2001) |
EN ISO 8968-4-2001 |
牛奶含氮量的测定第4部分:非蛋白质氮含量的测定 |
Milk - Determination of nitrogen content - Part 4: Determination of non-protein nitrogen content (ISO 8968-4:2001) |
EN ISO 8968-5-2001 |
牛奶含氮量的测定第5部分:蛋白质氮含量的测定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001) |
EN ISO 8973-1999 |
液化石油气密度和蒸气压的计算 |
Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997) |
EN ISO 8974-2002 |
塑料酚醛树脂用气体色谱法测定残余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002) |
EN ISO 8975-1995 |
塑料酚醛树脂pH值的测定 |
Plastics - Phenolic resins - Determination of pH (ISO 8975:1989) |
EN ISO 898-1-1999 |
碳钢和铸钢铸造的紧固件机械性能第1部分:螺栓、螺钉和螺柱 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999) |
EN ISO 898-5-1998 |
碳钢和铸钢铸造的紧固件机械性能第5部分:紧定螺钉及类似的不受拉应力的螺纹紧固件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998) |
EN ISO 898-6-1995 |
紧固件机械性能第6部分:规定保证载荷值的螺母 细牙螺纹 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
EN ISO 8980-1-1997 |
眼科光学未切边成品眼镜片第1部分:单焦点和多焦点镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996) |
EN ISO 8980-1-2004 |
眼科光学.未切边成品眼镜片.第1部分:单焦点和多焦点镜片规范 |
|
EN ISO 8980-2-1997 |
眼科光学未切边成品眼镜片第2部分:渐变焦镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996) |
EN ISO 8980-2-2004 |
眼科光学.未切边成品眼镜片.第2部分:渐变焦眼镜片规范 |
|
EN ISO 8980-3-1999 |
眼科光学未切边成品眼镜片第3部分:透光性规范和试验方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999) |
EN ISO 8980-4-2000 |
眼科光学未切边成品眼镜片第4部分:防反射涂层的试验方法和规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000) |
EN ISO 8985-1998 |
塑料乙烯/乙酸乙烯共聚物(EVAC)热塑塑料乙酸乙烯含量的测定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998) |
EN ISO 8986-1-1999 |
塑料聚丁烯模塑和挤塑材料第1部分:命名体系和基本规范 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993) |
EN ISO 8987-1998 |
塑料酚醛树脂在B转变试验板上的活化性能的测定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995) |
EN ISO 8988-1997 |
塑料酚醛树脂六次甲基四胺含量的测定凯氏法和过氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995) |