标准号 |
中文名称 |
英文名称 |
| BS ISO 7270-1-2004 |
橡胶.热解气相色谱法分析.聚合物(单聚合物和混合物)的鉴定 |
|
| BS ISO 7270-2-2005 |
橡胶.热解气相色谱法分析.苯乙烯/丁二烯/异戊二烯苯乙烯比率的测定 |
|
| BS ISO 7278-3-1998 |
液态烃.动态测量.容积式流量计试验系统.第3部分:脉冲内插技术 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pulse interpolation techniques |
| BS ISO 7278-4-1999 |
液态烃.动态测量.容积式流量计试验系统.管道验证操作者指南 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers |
| BS ISO 7299-1997 |
柴油发动机.燃油喷射泵端面装配的法兰盘 |
Diesel engines - End-mounting flanges for fuel injection pumps |
| BS ISO 7314-2003 |
航空航天.液压系统.金属软管组件 |
Aerospace - Fluid systems - Metal hose assemblies |
| BS ISO 732-2001 |
摄影技术.120和220规格的胶片.尺寸 |
Photography - 120-size and 220-size films - Dimensions |
| BS ISO 7322-2000 |
复合软木.试验方法 |
Composition cork - Test methods |
| BS ISO 7341-2000 |
银行业务.银行往来帐户对帐表 |
Banking - Nostro accounts reconciliation |
| BS ISO 7341-2005 |
银行业务.银行往来帐户核对 |
|
| BS ISO 7343-1995 |
电影技术.在35mm电影拷贝上双声轨摄影录音.位置和宽度尺寸 |
Cinematography - Two-track photographic sound records on 35 mm motion-picture prints - Positions and width dimensions |
| BS ISO 7348-1995 |
玻璃容器.制造.词汇 |
Glass containers - Manufacture - Vocabulary |
| BS ISO 7391-1-1997 |
塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体制和基本 |
Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications |
| BS ISO 7391-2-1997 |
塑料.聚碳酸酯模塑和挤塑材料.第2部分:试样制备和特性测定 |
Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties |
| BS ISO 7401-2003 |
道路车辆.横向瞬态响应的试验方法.开路控制试验法 |
(Road vehicles - Lateral transient response test methods - Open-loop test methods) |
| BS ISO 7425-1-2002 |
液压传动.弹性体塑料表面密封件的腔.尺寸和公差.活塞密封腔 |
Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings |
| BS ISO 7425-2-2002 |
液压传动.弹性体塑料表面密封件的腔.尺寸和公差.活塞杆密封腔 |
(Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings) |
| BS ISO 7475-2002 |
机械振动.平衡试验机.测量站用机罩和其他安全措施 |
(Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station) |
| BS ISO 7504-2002 |
气体分析.词汇 |
(Gas analysis - Vocabulary) |
| BS ISO 7507-1-2004 |
石油和液态石油产品.立式圆筒状油罐的标定.容量计量法 |
|
| BS ISO 7507-5-2000 |
石油和液态石油产品.立式圆柱形罐的校准.内电光通达距离法 |
(Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - External electro-optical distance-ranging method) |
| BS ISO 7539-8-2000 |
金属和合金的腐蚀.应力腐蚀试验.焊件评定试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of specimens to evaluate weldments |
| BS ISO 7539-9-2003 |
金属和合金的腐蚀.应力腐蚀试验.在上升荷载或上升位移下试验用预裂样品的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under rising load or rising displacement) |
| BS ISO 7547-2002 |
船舶和海上技术.起居处所的空调和通风.设计条件和计算基础 |
Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations |
| BS ISO 7565-1994 |
缩微摄影技术.透明缩微胶片阅读器.性能测量 |
Micrographics - Readers for transparent microforms - Measurement of characteristics |
| BS ISO 7573-2000 |
技术图纸.物资清单 |
Technical drawings - Item list |
| BS ISO 7588-1-1998 |
道路车辆.电气/电子开关设备.继电器和闪光器 |
Road vehicles - Electrical/electronic switching devices - Relays and flashers |
| BS ISO 7588-2-1999 |
道路车辆.电气/电子开关设备.第2部分:电子设备 |
Road vehicles - Electrical/electronic switching devices - Electronic devices |
| BS ISO 7588-3-1999 |
道路车辆.电气/电子开关设备.微继电器 |
Road vehicles - Electrical/electronic switching devices - Microrelays |
| BS ISO 7589-2002 |
摄影.感光测定用光源.规范 |
Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| BS ISO 7612-1996 |
柴油发动机.基座进油路燃料喷射泵.安装尺寸 |
Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions |
| BS ISO 7617-1-2002 |
室内装饰用塑料涂覆织物.聚氯乙烯(PVC)涂覆针织品规范 |
Plastics-coated fabrics for upholstery - Specification for PVC-coated knitted fabrics |
| BS ISO 762-2003 |
水果和蔬菜制品.矿物杂质含量的测定 |
(Fruit and vegetable products - Determination of mineral impurities content) |
| BS ISO 763-2003 |
水果和蔬菜制品.盐酸不溶性灰分的测定 |
(Fruit and vegetable products - Determination of ash insoluble in hydrochloric acid) |
| BS ISO 764-2002 |
时计学.磁阻表 |
Horology - Magnetic resistant watches |
| BS ISO 7654-1998 |
道路车辆.柴油发动机用离心式燃油滤油器.安装和连接尺寸 |
Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| BS ISO 7660-2001 |
香精油.含有难于皂化的酯类香精油酯值的测定 |
Essential oils - Determination of ester value of oils containing difficult-to-saponify esters |
| BS ISO 7720-1998 |
2型,常用扭矩全金属六角螺母.性能类别9 |
Prevailing torque type all-metal hexagon nuts, style 2. Property class 9 |
| BS ISO 7731-2005 |
人类工效学.公共和工作场所险情信号.险情听觉信号 |
|
| BS ISO 7731-2005 |
人类工效学.公共和工作场所险情信号.险情听觉信号 |
|
| BS ISO 7738-2001 |
螺钉和螺母用组合工具.组合扳手.扳手长度和端口最大厚度 |
Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads |
| BS ISO 7743-2004 |
硫化或热塑性橡胶.压缩应力-应变性能的测定 |
|
| BS ISO 7746-1998 |
银行业务.银行之间电报的电文格式 |
Banking. Telex formats for inter-bank messages |
| BS ISO 7760-2002 |
摄影.冲洗废液.对苯二酚含量的测定 |
Photography - Processing waste - Determination of hydroquinone |
| BS ISO 7766-1-1996 |
摄影技术.冲洗废液.氰化物分析.第1部分:用光谱法测定六氰基高铁酸盐(Ⅰ)和六氰基高铁酸盐(Ⅲ) |
Photography - Processing wastes - Analysis of cyanides - Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
| BS ISO 7766-2003 |
摄影冲洗废液.氰化物分析.用光谱法测定六氰基高铁酸盐(Ⅱ)和六氰基高铁酸盐(Ⅲ) |
(Processing photographic wastes - Analysis of cyanides - Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry) |
| BS ISO 777-2001 |
纸,纸浆和纸板.钙的测定 |
Paper, board and pulp - Determination of calcium |
| BS ISO 7772-1-1998 |
工业洗衣机对织物影响的评估.洗衣机 |
Assessment of industrial laundry machinery by its effect on textiles - Washing machines |
| BS ISO 7772-2-1996 |
通过对织物的影响来评价工业洗衣设备.第2部分:脱水机 |
Assessment of industrial laundry machinery by its effect on textiles - Extracting machines |
| BS ISO 7772-3-1996 |
通过对织物的影响来评价工业洗衣设备.第3部分:家用织物熨平机 |
Assessment of industrial laundry machinery by its effect on textiles - Flatwork-ironing machines |
| BS ISO 7772-4-1996 |
通过对织物的影响来评价工业洗衣设备.第4部分:分批干燥机 |
Assessment of industrial laundry machinery by its effect on textiles - Batch-drying tumblers |
| BS ISO 778-2001 |
纸,纸浆和纸板.铜的测定 |
Paper, board and pulp - Determination of copper |
| BS ISO 7780-1998 |
橡胶和橡胶胶乳.锰含量的测定.高碘酸钠光度计法 |
Rubber and rubber latices - Determination of manganese content - Sodium periodate photometric methods |
| BS ISO 7781-2002 |
丁苯生胶.皂类和有机酸含量的测定 |
Styrene-butadiene rubber, raw - Determination of soap and organic acid content |
| BS ISO 7789-1998 |
液压动力-插装式阀二,三和四口螺纹.空腔 |
Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities |
| BS ISO 779-2001 |
纸,纸浆和纸板.铁的测定 |
Paper, board and pulp - Determination of iron |
| BS ISO 7790-1998 |
液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸 |
Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions |
| BS ISO 7792-1-1998 |
塑料.热塑聚酯(TP)模塑和挤压材料.命名体制和基本规范 |
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Designation system and basis for specifications |
| BS ISO 7792-2-1998 |
塑料.热塑聚酯(TP)模塑和挤压材料.试样制备和性能测定 |
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Preparation of test specimens and determination of properties |
| BS ISO 78-2-1999 |
化学.标准的布局.化学分析方法 |
Chemistry - Layout for standards - Methods of chemical analysis |
| BS ISO 7800-2003 |
金属材料.线材.单向扭转试验 |
(Metallic materials - Wire - Simple torsion test) |
| BS ISO 7858-1-1998 |
闭合管路中水流量测量.饮用冷水用组合仪表.规范 |
Measurement of water flow in closed conduits - Combination meters for cold potable water - Specifications |
| BS ISO 7858-2-2001 |
闭合管路中水流量测量.饮用冷水用组合仪表.安装要求 |
Measurement of water flow in closed conduits - Combination meters for cold potable water - Installation requirements |
| BS ISO 7859-2000 |
机动脚踏两用车.燃料消耗量的测量 |
Mopeds - Fuel consumption measurements |
| BS ISO 7862-2004 |
道路车辆.通过模拟前面碰撞评价约束系统的滑板碰撞试验规程 |
|
| BS ISO 7867-1-2005 |
农业拖拉机和机械用轮胎和轮辋(米制系列).轮胎名称、尺寸、标志和轮胎/轮辋的配合 |
|
| BS ISO 7867-2-2005 |
农业拖拉机和机械用轮胎和轮辋(米制系列).使用条件及额定负载 |
|
| BS ISO 787-17-2002 |
颜料和体质颜料的试验通用方法.白色颜料亮度比较 |
General methods of test for pigments and extenders - Comparison of lightening power of white pigments |
| BS ISO 7876-4-2005 |
燃油喷射装置.词汇.高压管和末端接头 |
|
| BS ISO 7879-1998 |
柴油发动机.托架安装直列柱塞燃料泵.安装尺寸 |
Diesel engines - Cradle mounted in-line fuel injection pumps - Mounting dimensions |
| BS ISO 7889-2003 |
酸奶.特性微生物的计数.37℃时的菌落计数法 |
Yogurt - Enumeration of characteristic microorganisms - Colony-count technique at 37 鳦 |
| BS ISO 7914-2002 |
林业机械.便携式链锯.最小把手间隙和尺寸 |
Forestry machinery - Portable chain-saws - Minimum handle clearance and sizes |
| BS ISO 7918-1996 |
林业机械.手提式刷锯和草地平整器.割炬附件的护板尺寸 |
Forestry machinery - Portable brush cutters and grass trimmers - Cutting attachment guard dimensions |
| BS ISO 7919-1-1996 |
非往复式机械的机械振动.对旋转轴的测量和评定规范.第1部分:一般导则 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - General guidelines |
| BS ISO 7919-2-2002 |
非往复式机器的机械振动.旋转轴的测量和评价标准.陆地安装,功率超过50MW,正常运转速度为1500r/min、1800r/min、3000r/min和3600r/min的汽轮发电机组 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 7919-3-1996 |
非往复式机械的机械振动.对旋转轴的测量和评定规范.第3部分:耦合工业机械 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Coupled industrial machines |
| BS ISO 7919-4-1996 |
非往复式机械的机械振动.对旋转轴的测量和评定规范.第4部分:燃气轮机组 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Gas turbine sets |
| BS ISO 7919-5-1997 |
非往复式机械的机械振动.对旋转轴的测量和评定规范.液压动力制造和抽气装置用机械组 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Machine sets in hydraulic power generating and pumping plants |
| BS ISO 7967-5-2003 |
往复式内燃机.零件和系统的词汇.冷却系统 |
(Reciprocating internal combustion engines - Vocabulary of components and systems - Cooling systems) |
| BS ISO 7967-8-2005 |
往复式内燃机.零部件和系统词汇.起动系统 |
|
| BS ISO 7970-2000 |
小麦.规范 |
Wheat (Triticum aestivum L.) - Specification |
| BS ISO 7971-1-2003 |
谷物.容积密度“百升质量“的测定.参照法 |
(Cereals - Determination of bulk density, called “mass per hectolitre“ - Reference method) |
| BS ISO 7981-1-2005 |
水质.测定多核芳香烃类(PAH).液液萃取后用带荧光检测的高效薄层色谱法测定六PAH |
|
| BS ISO 7981-2-2005 |
水质.测定多核芳香烃类(PAH).液液萃取后用带荧光检测的高效液相色谱法测定六PAH |
|
| BS ISO 799-2004 |
船舶和海上技术.领航员扶梯 |
|
| BS ISO 7992-1995 |
铁矿石.负载条件下还原性能测定 |
Iron ores - Determination of reduction properties under load |
| BS ISO 8007-3-2005 |
铝生产用碳素材料.单个材料的取样方案和取样.侧壁块 |
|
| BS ISO 8009-1-1997 |
可重复使用的橡胶避孕隔膜.第1部分:分类、抽样和要求 |
Reusable rubber contraceptive diaphragms - Classification, sampling and requirements |
| BS ISO 8009-10-1997 |
可重复使用的橡胶避孕子宫帽.第10部分:储存的推荐方法 |
Reusable rubber contraceptive diaphragms - Recommendations for storage |
| BS ISO 8009-2-1997 |
可重复使用的橡胶避孕子宫帽.第2部分:尺寸的测定 |
Reusable rubber contraceptive diaphragms - Determination of size |
| BS ISO 8009-3-1997 |
可重复使用的橡胶避孕子宫帽.第3部分:子宫帽圆顶厚度的测定 |
Reusable rubber contraceptive diaphragms - Determination of dome thickness |
| BS ISO 8009-4-1997 |
可重复使用的橡胶避孕子宫帽.第4部分:防可见陷缺 |
Reusable rubber contraceptive diaphragms - Freedom from visible defects |
| BS ISO 8009-5-1997 |
可重复使用的橡胶避孕子宫帽.第5部分:抗拉性能的测定 |
Reusable rubber contraceptive diaphragms - Determination of tensile properties |
| BS ISO 8009-6-1997 |
可重复使用的橡胶避孕子宫帽.第6部分:加速老化后的变质测定 |
Reusable rubber contraceptive diaphragms - Determination of deterioration after accelerated ageing |
| BS ISO 8009-7-1997 |
可重复使用的橡胶避孕子宫帽.第7部分:螺簧和扁簧子宫帽的抗压缩性测定 |
Reusable rubber contraceptive diaphragms - Determination of compression resistance of coil spring and flat spring diaphragms |
| BS ISO 8009-8-1997 |
可重复使用的橡胶避孕子宫帽.第8部分:螺簧和扁簧子宫帽压缩时的扭转测定 |
Reusable rubber contraceptive diaphragms - Determination of twisting during compression of coil spring and flat spring diaphragms |
| BS ISO 8009-9-1997 |
可重复使用的橡胶避孕子宫帽.第9部分:包装和标签 |
Reusable rubber contraceptive diaphragms - Packaging and labelling |
| BS ISO 8015-2001 |
技术制图.公差标注基本原则 |
Technical drawings - Fundamental tolerancing principle |
| BS ISO 8020-2002 |
压制用工具.带圆头和直线或者缩小柄的冲头 |
Tools for pressing - Punches with cylindrical head and straight or reduced shank |
| BS ISO 8038-2-2001 |
光学和光学仪器.显微镜目镜和相关换镜旋座的螺纹.螺纹型M25×0.75mm |
Optics and optical instruments - Screw threads for microscope objectives and related nosepieces - Screw thread type M25 x 0,75 mm |
| BS ISO 8040-2001 |
光学和光学仪器.显微镜.镜筒导板和镜筒槽的连接尺寸 |
Optics and optical instruments - Microscopes - Dimensions of tube slide and tube slot connections |
| BS ISO 80416-2-2001 |
设备上用的图形符号的基本原则.箭头的格式和使用 |
Basic principles for graphical symbols for use on equipment - Form and use of arrows |
| BS ISO 8051-1999 |
公称直径从M3-M10的长柄丝锥.带凹槽的全尺寸丝锥 |
Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess |
| BS ISO 8058-1999 |
空中货运.隔热集装箱.热效率要求 |
Air cargo - Insulated containers - Thermal efficiency requirements |
| BS ISO 806-2004 |
主要用于铝生产的氧化铝.在300$ODC和1000$ODC时质量损失的测定 |
|
| BS ISO 8066-2-2001 |
自动空调器用橡胶和塑料软管及软管配件.规范.冷却剂134a |
Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a |
| BS ISO 8082-1996 |
自走式林业机械.防倾翻结构.实验室试验和性能要求 |
Self-propelled machinery for forestry - Roll-over protective structures - Laboratory tests and performance requirements |
| BS ISO 8082-2003 |
自行式林业机械.滚翻防护装置.实验室试验和性能要求 |
(Self-propelled machinery for forestry - Roll-over protective structures - Laboratory tests and performance requirements) |
| BS ISO 8084-2003 |
林业机械.操作人员保护结构.实验室试验和性能要求 |
(Machinery for forestry - Operator protective structures - Laboratory tests and performance requirements) |
| BS ISO 8085-1-2001 |
与供应气体燃料的聚乙烯管一起使用的聚乙烯配件.米制系列.规范.通过加热器具进行的套筒熔融用配件 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Fittings for socket fusion using heated tools |
| BS ISO 8085-2-2001 |
与供应气体燃料的聚乙烯管一起使用的聚乙烯配件.米制系列.规范.熔接用的、通过加热器具进行的套筒熔融用的及与电熔融一起使用的配件 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| BS ISO 8085-3-2001 |
与供应气体燃料的聚乙烯管一起使用的聚乙烯配件.米制系列.规范.电熔融配件 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Electrofusion fittings |
| BS ISO 8086-2004 |
乳品厂.卫生条件.检验和取样程序通用指南 |
|
| BS ISO 8086-2004 |
乳品厂.卫生条件.检验和取样程序通用指南 |
|
| BS ISO 8096-2005 |
雨衣用橡胶或塑料涂覆织物.规范 |
|
| BS ISO 8097-2001 |
航空器.经认证的航空成组装运设备的最低飞行性能要求和试验条件 |
Aircraft - Minimum airworthiness requirements and test conditions for certified air cargo unit load devices |
| BS ISO 8098-2002 |
自行车.儿童自行车的安全要求 |
Cycles - Safety requirements for bicycles for young children |
| BS ISO 8106-1995 |
玻璃容器.重量法测定容量.试验方法 |
Glass containers - Determination of capacity by gravimetric method - Test method |
| BS ISO 8113-1995 |
玻璃容器.抗垂直负荷强度.试验方法 |
Glass containers - Resistance to vertical load - Test method |
| BS ISO 8114-1993 |
纺织机械和附件.环锭纺纱机和并线机用锭子.等同术语目录 |
Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com