标准号 |
中文名称 |
英文名称 |
ISO 14788-1998 |
连续热浸5%锌铝合金涂覆钢薄板和卷材 |
(Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils) |
ISO 1479-1983 |
六角头自攻螺钉 |
(Hexagon head tapping screws) |
ISO 14790-1997 |
挡雪板.没有断开机构的装配.安全要求和试验方法 |
(Snowboard plate-bindings without a release mechanism - Safety requirements and test methods) |
ISO 14791-2000 |
道路车辆.重型商用车辆组合和链接式汽车.横向稳定性试验方法 |
(Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods) |
ISO 14792-2003 |
道路车辆.重型商用车辆和公共汽车.稳态循环试验 |
(Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests) |
ISO 14792-2003 |
道路车辆.重型商用车辆和公共汽车.稳态循环试验 |
|
ISO 14793-2003 |
道路车辆.重型商用车辆和汽车.横向瞬态响应试验方法 |
(Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods) |
ISO 14793-2003 |
道路车辆.重型商用车辆和汽车.横向瞬态响应试验方法 |
|
ISO 14794-2003 |
重型商用车辆和客车.转向制动.开环试验方法 |
(Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods) |
ISO 14794-2003 |
重型商用车辆和客车.转向制动.开环试验方法 |
|
ISO 14797-1999 |
动物饲料.呋喃唑酮含量的测定.高效液体色谱法 |
(Animal feeding stuffs - Determination of furazolidone content - Method using high-performance liquid chromatography) |
ISO 148-1983 |
钢.摆锤冲击试验(V形切口) |
(Steel; Charpy impact test (V-notch)) |
ISO 148-2-1998 |
金属材料.却贝摆式冲击试验.第2部分:试验机的验证 |
(Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines) |
ISO 148-3-1998 |
金属材料.却贝摆式冲击试验.第3部分:试验机验证用却贝V标准试样的特性及制备 |
(Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines) |
ISO 14801-2003 |
牙科学.牙科植入物的疲劳试验 |
(Dentistry - Fatigue test for endosseous dental implants) |
ISO 14801-2003 |
牙科学.牙科植入物的疲劳试验 |
|
ISO 14807-2001 |
摄影.透射和反射光密度计.性能测定法 |
(Photography - Transmission and reflection densitometers - Method for determining performance) |
ISO 14808-1997 |
摄影.135胶片盒的组成 |
(Photography - Composition of 135-film canisters) |
ISO 1481-1983 |
一字槽平圆头自攻螺钉 |
(Slotted pan head tapping screws) |
ISO 14817-2002 |
运输信息和控制系统.ITS/TICS数据词典和ITS/TICS中央数据记录要求 |
(Transport information and control systems - Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries) |
ISO 14819-1-2003 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.第1部分:无线电数据系统的编码协议. 用ALERT-C的交通电文 |
(Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 1: Coding protocol for Radio Data System; Traffic Message Channel (RDS-TMC) using ALERT-C) |
ISO 14819-1-2003 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.第1部分:无线电数据系统的编码协议. 用ALERT-C的交通电文信道(RDS-TMC) |
|
ISO 14819-2-2003 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.第2部分:无线电数据系统的事件和信息编码. 用ALERT-C的交 |
(Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 2: Event and information codes for Radio Data System; Traffic Message Channel (RDS-TMC)) |
ISO 14819-2-2003 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.第2部分:无线电数据系统的事件和信息编码. 用ALERT-C的交通电文信道(RDS-TMC) |
|
ISO 14819-3-2004 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.第3部分:ALERT-C的定位参照 |
|
ISO 1482-1983 |
一字槽沉头自攻螺钉(普通头型) |
(Slotted countersunk (flat) head tapping screws (common head style)) |
ISO 14825-2004 |
智能运输系统.地理数据文档(GDF).总体数据规范 |
|
ISO 14828-2003 |
玻璃增强热固性塑料管.潮湿条件下长期特定环形松驰硬度的测定和湿松弛因数的计算 |
(Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor) |
ISO 14828-2003 |
玻璃纤维增强热固性塑料管.潮湿条件下长期特定环形松驰硬度的测定和湿松弛因数的计算 |
|
ISO 14829-2002 |
货运集装箱.货运集装箱搬运用跨运车.稳定性的计算 |
(Freight containers - Straddle carriers for freight container handling - Calculation of stability) |
ISO 1483-1983 |
一字槽半沉头自攻螺钉(普通头型) |
(Slotted raised countersunk (oval) head tapping screws (common head style)) |
ISO 14839-1-2002 |
机械振动.有主动磁性轴承的旋转机械装置.第1部分:词汇 |
(Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearing - Part 1: Vocabulary) |
ISO 14839-2-2004 |
机械振动.装配有主动磁性轴承的旋转机械装置的振动.第2部分:振动评价 |
|
ISO 14847-1999 |
旋转变容泵.技术要求 |
(Rotary positive displacement pumps - Technical requirements) |
ISO 14848-1998 |
塑料.不饱和的聚酯树脂.130℃时反应性测定 |
(Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 C) |
ISO 14849-1999 |
塑料.苯酚甲醛注模.自由氨和胺化合物的测定.靛酚法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method) |
ISO 14850-1-2004 |
核能.废弃物包装件的活性测量.第1部分:带公开几何条件的整体模型中的高分辨率γ光谱测定法 |
|
ISO 14851-1999 |
水生介质中塑料材料极端好气菌生物降解性的测定.在一封闭呼吸器中测定氧需求的方法 |
(Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer) |
ISO 14852-1999 |
水生介质中塑料材料极端好气菌生物降解性的测定.提高二氧化碳分析的方法 |
(Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide) |
ISO 14855 AMD 1-2004 |
在可控复合条件下塑料材料富氧菌生物降解性和非集合性的测定.二氧化碳增量分析法.修改件1: 代替成熟堆肥的活性蛭石的使用 |
|
ISO 14855-1999 |
在控制复合条件下塑料材料极端好气菌生物降解性和非集合性的测定.提高二氧化碳分析的方法 |
(Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide) |
ISO 14856-2001 |
计时计.手表壳.无表带环式手表的固定尺寸 |
(Timekeeping instruments - Wristwatch-cases - Fixing dimensions of non-spring-bar types) |
ISO 14864-1998 |
水稻.烹饪过程中的谷粒胶凝时间的评估 |
(Rice - Evaluation of gelatinization time of kernels during cooking) |
ISO 14865-1998 |
林业机械.背负内燃机驱动的便携式手持灌木铲除机和草地修剪机.安全要求和试验 |
(Machinery for forestry - Portable hand-held brush-cutters and grass-trimmers with backpack-mounted combustion-engine power source - Safety requirements and testing) |
ISO 14869-1-2001 |
土壤质量.测定总素含量的溶解法.第1部分:用氢氟酸和过氯酸的溶解 |
(Soil quality - Dissolution for the determination of total element content - Part 1: Dissolution with hydrofluoric and perchloric acids) |
ISO 14869-2-2002 |
土壤质量.测定总素含量的溶解法.第2部分:用强碱熔解 |
(Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion) |
ISO 14870-2001 |
土壤质量.用缓冲DTPA溶液提取痕量素 |
(Soil quality - Extraction of trace elements by buffered DTPA solution) |
ISO 14877-2002 |
用粒状磨料进行喷砂操作用防护服 |
(Protective clothing for abrasive blasting operations using granular abrasives) |
ISO 14879-1-2000 |
外科植入物.完全的膝关节修复物.第1部分:胫骨支架耐用特性的测定 |
(Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays) |
ISO 14880-1 Technical Corrigendum 1-2003 |
显微物镜系列.第1部分:词汇.技术勘误1 |
(Microlens array - Part 1: Vocabulary; Technical Corrigendum 1) |
ISO 14880-1 Technical Corrigendum 1-2003 |
显微物镜系列.第1部分:词汇.技术勘误1 |
|
ISO 14880-1 Technical Corrigendum 1-2003 |
显微物镜系列.第1部分:词汇.技术勘误1 |
|
ISO 14880-1 Technical Corrigendum 1-2003 |
显微物镜系列.第1部分:词汇.技术勘误1 |
|
ISO 14880-1-2001 |
微距镜配置.第1部分:词汇 |
(Microlens array - Part 1: Vocabulary) |
ISO 14881-2001 |
整体光学.接口.与耦合特性有关的参数 |
(Integrated optics - Interfaces - Parameters relevant to coupling properties) |
ISO 14887-2000 |
样品制备.液体中粉末的分散程序 |
(Sample preparation - Dispersing procedures for powders in liquids) |
ISO 14889-2003 |
眼科光学.眼镜镜片.未切精加工眼镜片的基本要求 |
(Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses) |
ISO 14889-2003 |
眼科光学.眼镜镜片.未切精加工眼镜片的基本要求 |
|
ISO 14890-2003 |
输送带.通用织物结构的橡胶或塑料包覆的输送带规范 |
(Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use) |
ISO 14890-2003 |
输送带.通用织物结构的橡胶或塑料包覆的输送带规范 |
|
ISO 14891-2002 |
牛奶和奶制品.测定氮含量.根据 Dumas原理使用常规燃烧法 |
(Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle) |
ISO 14892-2002 |
脱脂奶粉.采用高性能液相色谱法测定维生素D的含量 |
(Dried skimmed milk - Determination of vitamin D content using high-performance liquid chromatography) |
ISO 14895-2000 |
小型船舶.船上厨房用液体燃料炉 |
(Small craft - Liquid-fuelled galley stoves) |
ISO 14896-2000 |
塑料.聚氨酯原材料.异氰酸酯的含量测定 |
(Plastics - Polyurethane raw materials - Determination of isocyanate content) |
ISO 14897-2002 |
塑料.用于聚氨酯生产的多醇.水含量的测定 |
(Plastics - Polyols for use in the production of polyurethane - Determination of water content) |
ISO 14898-1999 |
塑料.用于聚氨酯生产的芳香异氰酸酯.酸度测定 |
(Plastics - Aromatic isocyanates for use in the production of polyurethane - Determination of acidity) |
ISO 14899-2001 |
塑料.聚氨酯生产中用的多醇.基团的测定 |
(Plastics - Polyols for use in the production of polyurethane - Determination of basicity) |
ISO 14900-2001 |
塑料.聚氨酯生产中用的多醇.羟基数的测定 |
(Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number) |
ISO 14902-2001 |
动物饲料.大豆制品胰蛋白酶抑制剂活性的测定 |
(Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products) |
ISO 14906-2004 |
道路运输和交通远程信息管理.电子收费.专用短程通信的应用接口定义 |
|
ISO 14906-2004 |
道路运输和交通远程信息管理.电子收费.专用短程通信的应用接口定义 |
|
ISO 14910-1-1997 |
塑料.热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体.第1部分:命名系统和规范基础 |
(Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications) |
ISO 14910-2-1997 |
塑料.热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体.第2部分:试样准备和性能测定 |
(Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties) |
ISO 14911-1998 |
水质.用离子色谱法测定锂离子、钠离子、铵离子、钾离子、锰离子、镁离子、锶离子和钡离子含量.水和废水 |
(Water quality - Determination of dissolved Li, Na, NH, K, Mn, Ca, Mg, Sr and Ba using ion chromatography - Method for water and waste water) |
ISO 14912-2003 |
气体分析.气体混合成份数据的转换 |
(Gas analysis - Conversion of gas mixture composition data ) |
ISO 14912-2003 |
气体分析.气体混合成份数据的转换 |
|
ISO 14912-2003 |
气体分析.气体混合成份数据的转换 |
|
ISO 14912-2003 |
气体分析.气体混合成份数据的转换 |
|
ISO 14915-1-2002 |
多媒体用户接口的软件人类工效学.第1部分:设计原理和框架 |
(Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework) |
ISO 14915-2-2003 |
多媒体用户接口的软件人类工效学.第2部分:多媒体导航和控制 |
(Software ergonomics for multimedia user interfaces - Part 2: Multimedia navigation and control) |
ISO 14915-2-2003 |
多媒体用户接口的软件人类工效学.第2部分:多媒体导航和控制 |
|
ISO 14915-3-2002 |
多媒体用户接口的软件人类工效学.第3部分:媒体选择和组合 |
(Software ergonomics for multimedia user interface - Part 3: Media selection and combination) |
ISO 14916-1999 |
热喷涂.拉力粘附强度的测定 |
(Thermal spraying - Determination of tensile adhesive strength) |
ISO 14917-1999 |
热喷涂.术语,分类 |
(Thermal spraying - Terminology, classification) |
ISO 14918-1998 |
热喷涂.热喷涂的验收试验 |
(Thermal spraying - Approval testing of thermal sprayers) |
ISO 14919-2001 |
热喷涂.熔喷和电弧喷涂用线材、杆材和软线.分类.技术支持条件 |
(Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions) |
ISO 14920-1999 |
热喷镀.自熔化合金的熔化和喷镀 |
(Thermal spraying - Spraying and fusing of self-fluxing alloys) |
ISO 14921-2001 |
热喷涂.工程件用热喷镀涂层的应用程序 |
(Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components) |
ISO 14922-1-1999 |
热喷镀.热喷镀结构的质量要求.第1部分:选择和使用导则 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use) |
ISO 14922-2-1999 |
热喷镀.热喷镀结构的质量要求.第2部分:综合质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements) |
ISO 14922-3-1999 |
热喷镀.热喷镀结构的质量要求.第3部分:标准质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements) |
ISO 14922-4-1999 |
热喷镀.热喷镀结构的质量要求.第4部分:基本质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements) |
ISO 14923-2003 |
热喷涂.热喷涂层的表征和试验 |
(Thermal spraying - Characterization and testing of thermally sprayed coatings) |
ISO 14923-2003 |
热喷涂.热喷涂层的表征和试验 |
|
ISO 14931-2004 |
皮革.服装(毛皮类除外)用皮革的选择指南 |
|
ISO 14935-1998 |
石油及其相关产品.耐火流体的吸油绳燃烧持久性测定 |
(Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids) |
ISO 14937 Technical Corrigendum 1-2003 |
医疗保健产品.医疗器械用消毒剂的特性和消毒方法的开发、验证和常规控制的一般要求.技术勘误1 |
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices; Technical Corrigendum 1) |
ISO 14937 Technical Corrigendum 1-2003 |
医疗保健产品.医疗器械用消毒剂的特性和消毒方法的开发、验证和常规控制的一般要求.技术勘误1 |
|
ISO 14937-2000 |
医疗保健产品的消毒.医疗装置用消毒剂特性和消毒过程的开发、证实和常规管理的一般要求 |
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices) |
ISO 14939-2001 |
动物饲料.用高效液相色谱法测定卡巴氧的含量 |
(Animal feeding stuffs - Determination of carbadox content - Method using high-performance liquid chromatography) |
ISO 14943-2004 |
核燃料技术.核临界安全的相关管理标准 |
|
ISO 14945-2004 |
小型船舶.制造者标牌 |
|
ISO 14945-2004 |
小型船舶.制造者标牌 |
|
ISO 14946-2001 |
小型船舶.最大荷载能力 |
(Small craft - Maximum load capacity) |
ISO 14949-2001 |
外科植入物.两节附加加工的硅弹性体 |
(Implants for surgery - Two-part addition-cure silicone elastomers) |
ISO 14951-1-1999 |
航天系统.流体特性.第1部分:氧 |
(Space systems - Fluid characteristics - Part 1: Oxygen) |
ISO 14951-11-1999 |
航天系统.流体特性.第11部分:氨 |
(Space systems - Fluid characteristics - Part 11: Ammonia) |
ISO 14951-12-1999 |
航天系统.流体特性.第12部分:二氧化碳 |
(Space systems - Fluid characteristics - Part 12: Carbon dioxide) |
ISO 14951-13-1999 |
航天系统.流体特性.第13部分:呼吸用空气 |
(Space systems - Fluid characteristics - Part 13: Breathing air) |
ISO 14951-2-1999 |
航天系统.流体特性.第2部分:氢推进剂 |
(Space systems - Fluid characteristics - Part 2: Hydrogen propellant) |
ISO 14951-3 Technical Corrigendum 1-2000 |
航天系统.流体特性.第3部分:氮.技术勘误1 |
(Space systems - Fluid characteristics - Part 3: Nitrogen; Technical Corrigendum 1) |
ISO 14951-3-1999 |
航天系统.流体特性.第3部分:氮 |
(Space systems - Fluid characteristics - Part 3: Nitrogen) |
ISO 14951-4 Technical Corrigendum 1-2000 |
航天系统.流体特性.第4部分:氦.技术勘误1 |
(Space systems - Fluid characteristics - Part 4: Helium; Technical Corrigendum 1) |
ISO 14951-4-1999 |
航天系统.流体特性.第4部分:氦 |
(Space systems - Fluid characteristics - Part 4: Helium) |
ISO 14951-5-1999 |
航天系统.流体特性.第5部分:四氧化氮推进剂 |
Space systems - Fluid characteristics - Part 5: Nitrogen tetroxide propellant |
ISO 14951-6-1999 |
航天系统.流体特性.第6部分:一甲基联氨推进剂 |
Space systems - Fluid characteristics - Part 6: Monomethylhydrazine propellant |
ISO 14951-7-1999 |
航天系统.流体特性.第7部分:联氨推进剂 |
Space systems - Fluid characteristics - Part 7: Hydrazine propellant |
ISO 14951-8-1999 |
航天系统.流体特性.第8部分:煤油推进剂 |
Space systems - Fluid characteristics - Part 8: Kerosene propellant |
ISO 14951-9 Technical Corrigendum 1-2000 |
航天系统.流体特性.第9部分:氩.技术勘误1 |
Space systems - Fluid characteristics - Part 9: Argon; Technical Corrigendum 1 |
ISO 14951-9-1999 |
航天系统.流体特性.第9部分:氩 |
Space systems - Fluid characteristics - Part 9: Argon |