标准号 |
中文名称 |
英文名称 |
BS EN ISO 20846-2004 |
石油及其产品的试验方法.BS 2000-490:石油产品.液体石油产品的硫含量测定.紫外线荧光法 |
|
BS EN ISO 20846-2004 |
石油及其产品的试验方法.BS 2000-490:石油产品.机动车燃料的硫含量测定.紫外线荧光法 |
|
BS EN ISO 20847-2004 |
石油及其产品的试验方法.BS 2000-496:石油产品.机动车燃料的硫含量的测定.能量分散X-射线荧光光谱法 |
|
BS EN ISO 20863-2004 |
鞋靴.补强胶条和皮鞋包头的试验方法.粘合程度 |
|
BS EN ISO 20864-2004 |
鞋靴.补强胶条和皮鞋包头的试验方法.机械性能 |
|
BS EN ISO 20864-2004 |
鞋靴.补强胶条和皮鞋包头的试验方法.机械性能 |
|
BS EN ISO 20884-2004 |
石油及其产品的试验方法.BS 2000-497:石油产品.机动车燃料的硫含量的测定.波长分散X-射线荧光光谱法 |
|
BS EN ISO 21049-2005 |
泵.离心泵和旋转泵用轴封系统 |
|
BS EN ISO 21049-2005 |
泵.离心泵和旋转泵用轴封系统 |
|
BS EN ISO 2114-2000 |
塑料(聚酯树脂)、涂料和清漆(粘合剂).部分酸值和总酸值的测定 |
(Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value) |
BS EN ISO 21227-1-2003 |
色漆和清漆.用光成像评定覆层表面缺陷.通用指南 |
(Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - General guidance) |
BS EN ISO 21269-2004 |
有米制细螺距螺纹的六角凹头螺钉 |
|
BS EN ISO 21281-2005 |
自行式乘坐控制工业货车的踏板结构和布局.踏板结构和布局的原则 |
|
BS EN ISO 21281-2005 |
自行式乘坐控制工业货车的踏板结构和布局.踏板结构和布局的原则 |
|
BS EN ISO 21329-2004 |
石油和天然气工业.管道运输系统.机械连接件的试验程序 |
|
BS EN ISO 21351-2005 |
航天系统.功能和技术规范 |
|
BS EN ISO 2151-2004 |
声学.压缩机和真空泵的噪声试验规范.工程法(2级) |
|
BS EN ISO 21530-2004 |
牙科学.牙科设备表面用材料.耐化学消毒剂的测定 |
|
BS EN ISO 21533-2003 |
牙科.韧带内注射用可重复使用的管式注射器 |
(Dentistry - Reusable cartridge syringes intended for intraligamentary injections) |
BS EN ISO 21549-1-2004 |
医疗信息学.病人医疗卡数据.通用结构 |
|
BS EN ISO 21549-2-2004 |
医疗信息学.病人医疗卡数据.共同对象 |
|
BS EN ISO 21549-2-2004 |
医疗信息学.病人医疗卡数据.共同对象 |
|
BS EN ISO 21549-3-2004 |
医疗信息学.病人医疗卡数据.有限的临床数据 |
|
BS EN ISO 21549-3-2004 |
医疗信息学.病人医疗卡数据.有限的临床数据 |
|
BS EN ISO 21567-2004 |
食品和动物饲料的微生物学.志贺氏杆菌检测的水平方法 |
|
BS EN ISO 21567-2004 |
食品和动物饲料的微生物学.志贺氏杆菌检测的水平方法 |
|
BS EN ISO 21567-2004 |
食品和动物饲料的微生物学.志贺氏杆菌检测的水平方法 |
|
BS EN ISO 2157-1995 |
牙科用旋转器械.公称直径和命名代码 |
(Dental rotary instruments - Nominal diameters and designation code number) |
BS EN ISO 21571-2005 |
食品.基因改良有机体及其衍生物检测的分析方法.核酸萃取 |
|
BS EN ISO 21572-2004 |
食品.基因改良有机物及衍生产品的检测方法.基于蛋白质的方法 |
|
BS EN ISO 216-1990 |
书写纸和某些类别的印刷纸.裁切后尺寸.A和B系列 |
(Writing paper and certain classes of printed matter - Trimmed sizes - A and B series) |
BS EN ISO 2160-1999 |
石油产品.对铜的腐蚀性.铜片试验 |
(Petroleum products - Corrosiveness to copper - Copper strip test) |
BS EN ISO 2162-1-1996 |
技术产品文件.弹簧.简化表示法 |
(Technical product documentation - Springs - Simplified representation) |
BS EN ISO 2162-2-1996 |
技术产品文献.弹簧.数据圆柱型螺旋状压缩弹簧的介绍 |
(Technical product documentation - Springs - Presentation of data for cylindrical helical compression springs) |
BS EN ISO 2162-3-1996 |
技术产品文献.弹簧.第3部分:词汇 |
(Technical product documentation - Springs - Vocabulary) |
BS EN ISO 21627-1-2003 |
塑料.环氧树脂.氯含量测定.无机氯 |
(Plastics - Epoxy resins - Determination of chlorine content - Inorganic chlorine) |
BS EN ISO 21627-2-2003 |
塑料.环氧树脂.氯含量测定.易皂化氯 |
(Plastics - Epoxy resins - Determination of chlorine content - Easily saponifiable chlorine) |
BS EN ISO 21627-3-2003 |
塑料.环氧树脂.氯含量测定.氯总量 |
(Plastics - Epoxy resins - Determination of chlorine content - Total chlorine) |
BS EN ISO 21647-2004 |
医用电气设备.呼吸气体监测器的基本安全和性能的特殊要求 |
|
BS EN ISO 21670-2003 |
法兰六角焊接螺母 |
(Hexagon weld nuts with flange) |
BS EN ISO 2177-1986 |
金属镀层.镀层厚度的测量.阳极分解的电量计法 |
(Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution) |
BS EN ISO 2177-2005 |
金属覆层.覆层厚度的测量.阳极溶解库仑法 |
|
BS EN ISO 2178-1984 |
磁性基质的非磁性镀层.镀层厚度的测量.磁性法 |
(Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method) |
BS EN ISO 22000-2005 |
食品安全管理系统.食品链上任一组织的要求 |
|
BS EN ISO 2203-1997 |
技术制图.齿轮的习惯画法 |
(Technical drawing - Conventional representation of gears) |
BS EN ISO 22174-2005 |
食品和动物饲料的微生物学.食物传染病原体检测用聚合酶链反应(PCR).一般要求和定义 |
|
BS EN ISO 22174-2005 |
食品和动物饲料的微生物学.食物传染病原体检测用聚合酶链反应(PCR).一般要求和定义 |
|
BS EN ISO 2231-1992 |
橡胶或塑料涂覆织物.试件环境调节标准大气 |
(Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing) |
BS EN ISO 2233-2001 |
包装.完整满装的运输包装件.试验条件 |
(Packaging - Complete, filled transport packages and unit loads - Conditioning for testing) |
BS EN ISO 2234-2002 |
包装.满装的运输包装和成组装运.利用静态负荷法进行堆积试验 |
(Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load) |
BS EN ISO 2244-2002 |
包装.满装运输包装和组成装运.水平冲击试验 |
(Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests) |
BS EN ISO 2247-2003 |
包装.满装的运输包装件和成组装运.固定低频率振动试验 |
(Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency) |
BS EN ISO 22612-2005 |
传染介质防护服.防干微生物渗入的试验方法 |
|
BS EN ISO 22612-2005 |
传染介质防护服.防干微生物渗入的试验方法 |
|
BS EN ISO 22777-2005 |
鞋靴.附件的试验方法:粘扣.附件用反复粘合前后的剥离强度法.粘扣.反复粘合前后的剥离强度 |
|
BS EN ISO 228-1-2003 |
非螺纹密封连接的管螺纹.尺寸、公差和名称与符号 |
(Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation) |
BS EN ISO 228-2-2003 |
非螺纹密封连接的管螺纹.极限量规检验 |
(Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges) |
BS EN ISO 2286-1-1998 |
橡胶或塑料涂覆织物.卷料参数的测定.第1部分:长度、宽度和湿重的测定方法 |
(Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of length, width and net mass) |
BS EN ISO 2286-2-1998 |
橡胶或塑料涂覆织物.卷料参数的测定.第2部分:涂料每单位面积总质量、质量和衬底每单位面积质量的测定方法 |
(Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate) |
BS EN ISO 2286-3-1998 |
橡胶或塑料涂覆织物.卷绕特性的测定.第3部分:厚度的测定方法 |
(Rubber- or plastics-coated fabrics - Determination of roll characteristics - Method for determination of thickness) |
BS EN ISO 2307-2005 |
纤维绳索.特定物理和机械性能的测定 |
|
BS EN ISO 2320-1998 |
常用扭矩式钢质六角螺母.机械和性能要求 |
(Prevailing torque type steel hexagon nuts - Mechanical and performance requirements) |
BS EN ISO 2338-1998 |
未淬硬钢和奥氏体不锈钢制的平行销 |
(Parallel pins of unhardened steel and austenitic stainless steel) |
BS EN ISO 2342-2004 |
有钉体的开槽无头螺钉 |
|
BS EN ISO 23429-2004 |
六角槽的测量 |
|
BS EN ISO 2360-2003 |
非磁性电导基体金属上的非导体镀层.镀层厚度的测量.波幅灵敏涡流法 |
(Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method) |
BS EN ISO 2361-1984 |
磁性和非磁性基质的镍电镀层.镀层厚度的测量.磁性法 |
(Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method) |
BS EN ISO 2398-1996 |
压缩空气用纺织纤维增强橡胶软管规范 |
(Rubber hose, textile-reinforced, for compressed air - Specification) |
BS EN ISO 2409-1992 |
色漆和清漆.交叉切割试验 |
(Paints and varnishes - Cross-cut test) |
BS EN ISO 2411-2000 |
橡胶或塑料涂层织物.涂层粘合力的测定 |
(Rubber or plastics-coated fabrics - Determination of coating adhesion) |
BS EN ISO 2417-2003 |
皮革.物理和机械试验.静吸水率的测定 |
(Leather - Physical and mechanical tests - Determination of the static absorption of water) |
BS EN ISO 2418-2003 |
皮革.化学、物理、机械和色牢度试验.取样部位 |
(Leather - Chemical, physical and mechanical and fastness tests - Sampling location) |
BS EN ISO 2419-2003 |
皮革.物理和机械试验.样品制备和状态调节 |
(Leather - Physical and mechanical tests - Sample preparation and conditioning) |
BS EN ISO 2420-2003 |
皮革.物理和机械试验.表观密度的测定 |
(Leather - Physical and mechanical tests - Determination of apparent density) |
BS EN ISO 24234-2004 |
牙科学.牙科汞齐合金用汞及合金 |
|
BS EN ISO 24234-2004 |
牙科学.牙科汞齐合金用汞及合金 |
|
BS EN ISO 2431-1996 |
色漆和清漆.用流量杯测定流动时间 |
(Paints and varnishes - Determination of flow time by use of flow cups) |
BS EN ISO 2439-2001 |
柔性多孔聚合物材料.硬度的测定(压痕技术) |
(Flexible cellular polymeric materials - Determination of hardness (indentation technique)) |
BS EN ISO 2440-2000 |
柔性和硬性多孔聚合物材料.加速老化试验 |
(Flexible and rigid cellular polymeric materials - Accelerated ageing tests) |
BS EN ISO 2450-1999 |
奶油.脂肪含量的测定(基准方法) |
(Cream - Determination of fat content (Reference method)) |
BS EN ISO 2503-1998 |
气焊设备.焊接,切割和类似工艺用300巴以上气瓶调压器 |
(Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar) |
BS EN ISO 252-1-1999 |
织物传输带.结构件之间的粘结强度.试验方法 |
(Textile conveyor belts - Adhesive strength between constitutive elements - Methods of test) |
BS EN ISO 2535-2002 |
塑料.未饱和的聚酯树脂.25℃时的胶凝时间的测量 |
(Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature) |
BS EN ISO 2538-2004 |
产品几何量技术规范.棱体的角度和斜度系列 |
|
BS EN ISO 2566-1-1999 |
钢.伸长值的换算.碳素钢和低合金钢 |
(Steel - Conversion of elongation values - Carbon and low alloy steels) |
BS EN ISO 2566-2-2001 |
钢.伸长值换算.奥氏体钢 |
(Steel - Conversion of elongation values - Austenitic steels) |
BS EN ISO 2578-1993 |
塑料.长期暴露于热作用后时间和温度极限值的测定 |
(Plastics - Determination of the time-temperature limits after prolonged exposure to heat) |
BS EN ISO 2580-1-2002 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和压塑材料.名称和符号系统和规范基础 |
(Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Designation system and basis for specifications) |
BS EN ISO 2580-2-2004 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.试样制备和性能测定 |
|
BS EN ISO 2589-2003 |
皮革.物理和机械试验.厚度的测定 |
(Leather - Physical and mechanical tests - Determination of thickness) |
BS EN ISO 2592-2001 |
闪点和燃点的测定.克利弗兰得(Cleveland)开杯法 |
(Determination of flash and fire points - Cleveland open cup method) |
BS EN ISO 2624-1995 |
铜及铜合金.平均粒度估计 |
(Copper and copper alloys - Estimation of average grain size) |
BS EN ISO 2626-1995 |
铜.氢脆裂试验 |
(Copper - Hydrogen embrittlement test) |
BS EN ISO 2639-2002 |
钢.渗碳层和硬化层的深度的测定和检验 |
(Steels - Determination and verification of the depth of carburized and hardened cases) |
BS EN ISO 266-1997 |
声学的优选频率 |
(Acoustics - Preferred frequencies) |
BS EN ISO 2702-1992 |
热处理钢自攻螺钉的机械性能 |
(Heat-treated steel tapping screws - Mechanical properties) |
BS EN ISO 2738-2000 |
烧结金属材料(硬金属除外).密度、油含量和开口孔隙度的测定 |
(Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity) |
BS EN ISO 2739-1998 |
烧结金属衬套.径向抗压强度的测定 |
(Sintered metal bushes - Determination of radial crushing strength) |
BS EN ISO 2740-2000 |
绕结金属材料(不包括硬质合金).拉力试件 |
Sintered metal materials, excluding hardmetals - Tensile test pieces |
BS EN ISO 2758-2002 |
纸.耐破裂强度的测定 |
(Paper - Determination of bursting strength) |
BS EN ISO 2759-2002 |
纸板.耐破裂强度的测定 |
(Board - Determination of bursting strength) |
BS EN ISO 2789-2003 |
情报和文献.国际图书馆统计学 |
(Information and documentation - International library statistics) |
BS EN ISO 2806-1995 |
工业自动化系统.数控机床词汇 |
(Industrial automation systems - Numerical control of machines - Vocabulary) |
BS EN ISO 2810-2004 |
色漆和清漆.涂层的自然风化.暴露和评定 |
|
BS EN ISO 2812-1-1993 |
色漆和清漆.耐液体浸蚀测定.第1部分:总方法 |
(Paints and varnishes - Determination of resistance to liquids - General methods) |
BS EN ISO 2812-2-1993 |
色漆和清漆.耐液体浸蚀的测定.第2部分:浸液法 |
(Paints and varnishes - Determination of resistance to liquids - Water immersion method) |
BS EN ISO 2815-2003 |
色漆和清漆.布考耳兹(Buchholz)压痕试验 |
(Paints and varnishes - Buchholz indentation test) |
BS EN ISO 2818-1996 |
塑料.试样的机加工制备 |
(Plastics - Preparation of test specimens by machining) |
BS EN ISO 2819-1980 |
金属基质上的金属镀层.电镀层和化学沉积层.试验附着力的方法述评 |
(Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion) |
BS EN ISO 283-1-2000 |
织物传送带.全厚度织物试验.拉伸强度的测定.断裂伸长和参考负荷的测定 |
(Textile conveyor belts - Full thickness tensile testing - Determination of tensile strength, elongation at break and elongation at the reference load) |
BS EN ISO 284-2003 |
输送带.导电率.规范和试验方法 |
(Conveyor belts - Electrical conductivity - Specification and test method) |
BS EN ISO 2867-1999 |
土方机械.出入口装置 |
(Earth-moving machinery - Access systems) |
BS EN ISO 2870-1994 |
表面活性剂.洗涤剂.酸性条件下可水解的和不可水解的阴离子活性物质的测定 |
(Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions) |
BS EN ISO 2871-1-1994 |
表面活性剂.洗涤剂-阳离子活性物质含量的测定.第1部分:高分子量阳极活性物质 |
(High molecular mass cationic-active matter) |
BS EN ISO 2871-2-1994 |
表面活性剂.洗涤剂,阳离子活性物含量测定.第2部分:低分子团(200-500)的阳离子活性物质 |
(Surface active agents - Detergents - Determination of cationic-active matter content - Cationic-active matter of low molecular mass (between 200 and 500)) |
BS EN ISO 2873-2003 |
包装.满装运输包装件和成组装运.低压试验 |
(Packaging - Complete, filled transport packages and unit loads - Low pressure test) |
BS EN ISO 2875-2002 |
包装.完整,满装运输包装件和成组装运.水喷淋试验 |
(Packaging - Complete, filled transport packages and unit loads - Water-spray test) |
BS EN ISO 2897-2-2004 |
塑料.耐冲击聚苯乙烯(PS-I)模塑和挤塑材料.试样制备和性能测定 |
|
BS EN ISO 291-1997 |
塑料.调节和检验用的标准大气压 |
(Plastics - Standard atmospheres for conditioning and testing) |
BS EN ISO 2922-2001 |
声学.内河航道和港湾船舶发出的噪音测量 |
(Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours) |