标准号 |
中文名称 |
英文名称 |
EN ISO 7090-2000 |
平垫圈倒角标准系列产品等级A级 |
Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000) |
EN ISO 7091-2000 |
平垫圈标准系列产品等级C级 |
Plain washers - Normal series - Product grade C (ISO 7091:2000) |
EN ISO 7092-2000 |
平垫圈小系列产品等级A级 |
Plain washers - Small series - Product grade A (ISO 7092:2000) |
EN ISO 7093-1-2000 |
平垫圈大系列第1部分:产品等级A级 |
Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000) |
EN ISO 7093-2-2000 |
平垫圈大系列第2部分:产品等级C级 |
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000) |
EN ISO 7094-2000 |
平垫圈特大系列产品等级C级 |
Plain washers - Extra large series - Product grade C (ISO 7094:2000) |
EN ISO 7096-2000 |
土方机械司机座椅振动的实验室测定 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
EN ISO 7142-2004 |
色漆和清漆用粘合剂.环氧树脂.通用试验方法 |
|
EN ISO 7143-2004 |
色漆、清漆和粘合剂.表征水基涂层材料和粘合剂的试验方法 |
|
EN ISO 7153-1-2000 |
外科器械金属材料第1部分:不锈钢 |
Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999) |
EN ISO 717-1-1996 |
声学建筑和建筑构件的隔声标定第1部分:空气声隔声 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:1996) |
EN ISO 717-2-1996 |
声学建筑和建筑构件的隔声标定第2部分:撞击声隔声 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996) |
EN ISO 7200-2004 |
技术产品文献.标题栏和文献标题的数据字段 |
|
EN ISO 7208-1999 |
脱脂乳、乳清和酪乳脂肪含量的测定重量分析法(参照法) |
Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (Reference method) (ISO 7208:1999) |
EN ISO 7214-2000 |
泡沫塑料聚乙烯试验方法 |
Cellular plastics - Polyethylene - Methods of test (ISO 7214:1998) |
EN ISO 7231-1997 |
软质泡沫聚合材料恒定压下的空气流量评价法 |
Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop (ISO 7231:1984) |
EN ISO 7233-1995 |
橡胶和塑料软管和软管组件耐真空性能测定 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991) |
EN ISO 7235-2003 |
声学管道消音器和气端装置的实验室测量步骤插入损失、流动噪声和总压损失 |
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
EN ISO 7250-1997 |
用于技术设计的人体测量基础项目 |
Basic human body measurements for technological design (ISO 7250:1996) |
EN ISO 7253-2001 |
色漆和清漆耐中性盐雾的测定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) (ISO 7253:1996) |
EN ISO 7263-1995 |
瓦楞芯纸实验室起瓦楞后平压强度的测定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994) |
EN ISO 7278-1-1995 |
液态烃动态测量计量校正系统第1部分:总则 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987) |
EN ISO 7278-2-1995 |
液态烃动态测量计量校正系统第2部分:管道校准 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988) |
EN ISO 7284-1996 |
电阻焊设备汽车工业用多点点焊的两个单独副线圈的变压器的特殊技术条件 |
Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993) |
EN ISO 7287-2002 |
热切割设备用图形符号 |
Graphical symbols for thermal cutting equipment (ISO 7287:2002) |
EN ISO 7291-2001 |
气焊设备用于300bar以下的焊接、切割及相关工艺用汇流系统上的压力调节器 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999) |
EN ISO 7327-1997 |
塑料环氧树脂用固化剂和促进剂酸酐中游离酸测定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994) |
EN ISO 7328-1999 |
以牛乳为基料的食用冰制品和冰调制的食品脂肪含量的测定重量分析法(参照法) |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) (ISO 7328:1999) |
EN ISO 734-1-2000 |
油籽饼粕含油量测定第1部分:已烷(或石油醚)提取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:1998) |
EN ISO 734-2-2000 |
油籽饼粕含油量测定第2部分:快速提取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998) |
EN ISO 7345-1995 |
绝热物理量和定义 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987) |
EN ISO 7346-1-1997 |
水质对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定第1部分:静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae) - Part 1: Static method (ISO 7346-1:1996) |
EN ISO 7346-2-1997 |
水质对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定第2部分:半静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method (ISO 7346-2:1996) |
EN ISO 7346-3-1997 |
水质对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定第3部分:直流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method (ISO 7346-3:1996) |
EN ISO 7371-1995 |
家用制冷设备带或不带低温隔层的冷藏箱特性和试验方法 |
Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods (ISO 7371:1995) |
EN ISO 7380-1997 |
内六角平圆头螺钉 |
Hexagon socket button head screws (ISO 7380:1997) |
EN ISO 7380-2004 |
内六角平圆头螺钉 |
|
EN ISO 7384-1995 |
人工环境下的腐蚀试验一般要求 |
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986) |
EN ISO 7391-1-1999 |
塑料聚碳酸酯模塑和挤塑材料第1部分:命名体系和基本规范 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:1996) |
EN ISO 7391-2-1999 |
塑料聚碳酸酯模塑和挤塑材料第2部分:试样制备和特性测定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996) |
EN ISO 7393-1-2000 |
水质游离氯和总氯的测定第1部分:N、N-二乙基-1,4-苯二胺滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985) |
EN ISO 7393-2-2000 |
水质游离氯和总氯的测定第2部分:N、N-二乙基-1,4-苯二胺比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine for routine control purposes (ISO 7393-2:1985) |
EN ISO 7393-3-2000 |
水质游离氯和总氯的测定第3部分:碘量滴定法测总氯 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990) |
EN ISO 7405-1997 |
牙科学用于牙科的医疗器械生物相容性临床前评价牙科材料的试验方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997) |
EN ISO 7437-1996 |
技术制图建筑工程制图预制结构件图纸加工通则 |
Technical drawings - Construction drawings - General rules for execution of production drawings for prefabricated structural components (ISO 7437:1990) |
EN ISO 7438-2000 |
金属材料弯曲试验 |
Metallic materials - Bend test (ISO 7438:1985) |
EN ISO 7439-2002 |
铜环宫内节育避孕器要求测试 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002) / Note: To be amended by EN ISO 7439/prA1 (2003-09). |
EN ISO 7441-1995 |
金属与合金的腐蚀户外暴露腐蚀试验中双金属腐蚀的测定 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984) |
EN ISO 7458-2004 |
玻璃容器.耐内部压力性.试验方法 |
|
EN ISO 7459-2004 |
玻璃容器.耐热冲击性和热冲击耐久性.试验方法 |
|
EN ISO 748-2000 |
明渠水流测量流速面积法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997) |
EN ISO 7488-1995 |
牙科银汞合金搅拌器 |
Dental amalgamators (ISO 7488:1991) |
EN ISO 7490-2000 |
牙科含石膏铸造包埋材料 |
Dental gypsum-bonded casting investments (ISO 7490:2000) |
EN ISO 7491-2000 |
牙科材料色稳定性的测定 |
Dental materials - Determination of colour stability (ISO 7491:2000) |
EN ISO 7492-1998 |
牙科探针 |
Dental explorers (ISO 7492:1997) |
EN ISO 7493-2000 |
牙科医生凳 |
Dental operators stool (ISO 7493:1997, including Technical Corrigendum 1:1999) |
EN ISO 7494-1997 |
牙科综合治疗设备 |
Dental units (ISO 7494:1996) |
EN ISO 7494-2-2003 |
牙科 牙科设备 空气和水供给系统 |
Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003) |
EN ISO 75-1-1996 |
塑料载荷下挠曲温度的测定第1部分:一般试验方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993) |
EN ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.第1部分:一般试验方法 |
|
EN ISO 75-2-1996 |
塑料载荷下挠曲温度的测定第2部分:塑料与硬橡胶 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993) |
EN ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶 |
|
EN ISO 75-3-1996 |
塑料载荷下挠曲温度的测定第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993) |
EN ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
|
EN ISO 7500-1-1999 |
金属材料静态单轴向试验机的验证第1部分:拉伸/压缩试验机 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines (ISO 7500-1:1999) |
EN ISO 7500-1-2004 |
金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 |
|
EN ISO 7500-2-1999 |
金属材料静态单轴向试验机的验证第2部分:拉伸蠕变试验机载荷的验证 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load (ISO 7500-2:1996) |
EN ISO 7518-1999 |
技术制图建筑工程制图拆除和重建的简化画法 |
Technical drawings - Construction drawings - Simplified representation of demolition and rebuilding (ISO 7518:1983) |
EN ISO 7519-1996 |
技术制图建筑工程制图总体布置图和安装图画法的一般原则 |
Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991) |
EN ISO 7536-1996 |
石油产品汽油氧化安定性的测定诱导期法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994) |
EN ISO 7539-1-1995 |
金属与合金的腐蚀应力腐蚀试验第1部分:试验程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987) |
EN ISO 7539-2-1995 |
金属与合金的腐蚀应力腐蚀试验第2部分:弯梁试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989) |
EN ISO 7539-3-1995 |
金属与合金的腐蚀应力腐蚀试验第3部分:U型弯曲试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989) |
EN ISO 7539-4-1995 |
金属与合金的腐蚀应力腐蚀试验第4部分:轴向载荷拉伸试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989) |
EN ISO 7539-5-1995 |
金属与合金的腐蚀应力腐蚀试验第5部分:C-环行试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989) |
EN ISO 7539-6-2003 |
金属与合金的腐蚀应力腐蚀试验第6部分:预裂纹试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement (ISO 7539-6:2003) |
EN ISO 7539-7-1995 |
金属与合金的腐蚀应力腐蚀试验第7部分:慢速率应力试验 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989) |
EN ISO 7551-1998 |
牙科吸水捻 |
Dental absorbent points (ISO 7551:1996) |
EN ISO 7579-1996 |
染料有机溶剂中溶解度的测定重量法 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method (ISO 7579:1990) |
EN ISO 7590-2001 |
钢丝绳芯输送带总厚度和涂层厚度的测定方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001) |
EN ISO 7622-1-1995 |
钢丝绳芯输送带纵向牵引力试验第1部分:伸长率测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984) |
EN ISO 7622-2-1995 |
钢丝绳芯输送带纵向牵引力试验第2部分:拉伸强度的测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984) |
EN ISO 7623-1997 |
钢丝绳芯输送带绳芯与涂层之间粘合力试验原始试验和热处理 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996) |
EN ISO 7662-1996 |
橡胶和塑料软管衬里耐磨性的测定 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988) |
EN ISO 7711-1-1998 |
牙科旋转器械金刚钻器械第1部分:尺寸、要求、标记和包装 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997) |
EN ISO 7711-2-1995 |
牙科旋转器械金刚钻器械第2部分:切盘 |
Dental rotary instruments - Diamond instruments - Part 2: Discs (ISO 7711-2:1992) |
EN ISO 7711-3-1995 |
牙科旋转器械金刚钻器械第3部分:磨粒尺寸、标注与彩色编码 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992) |
EN ISO 7711-3-2004 |
牙医学.金刚钻旋转器械.第3部分:磨粒尺寸、名称与符号和色码 |
|
EN ISO 7719-1997 |
有效力矩型全金属六角螺母1型性能等级5、8级和10级 |
Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 (ISO 7719:1997) |
EN ISO 772-2000 |
水文测验词汇和符号 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996) |
EN ISO 7721-2-1994 |
沉头螺钉第2部分:十字槽插入深度 |
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990) |
EN ISO 7726-2001 |
热环境人类工效学测定物理量的方法 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
EN ISO 7730-1995 |
热环境人类工效学对热舒适度的PMV和PPD指标和规格的测定 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994) |
EN ISO 7751-1997 |
橡胶和塑料软管和软管组件试验压力和爆破压力对设计工作压力的比值 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991) |
EN ISO 7765-1-2004 |
塑料薄膜和薄板.自由落体法测定抗冲击性.第1部分:梯级法 |
|
EN ISO 7783-1-1999 |
色漆和清漆水蒸气渗透率的测定第1部分:自由膜碟法 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
EN ISO 7783-2-1999 |
色漆和清漆外部砖石工程和混凝土用涂覆材料和涂覆体系第2部分:水蒸气渗透率的测定和分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
EN ISO 7785-1-1999 |
牙科手机第1部分:高速气动涡轮手机 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
EN ISO 7785-2-1997 |
牙科手机第2部分:直角和弯角手机 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) |
EN ISO 7786-2001 |
牙科旋转器械技工室用研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001) |
EN ISO 7787-2-2000 |
牙科旋转器械切割刀具第2部分:技工室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000) |
EN ISO 7787-4-2002 |
牙科旋转器械切割刀具第4部分:微型技工室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002) |
EN ISO 7792-1-2004 |
塑料.热塑性聚酯模塑和挤压材料.第1部分:名称与符号系统和基本规范 |
|
EN ISO 7792-2-2004 |
塑料.热塑性聚酯模塑和挤压材料.第2部分:试验样品的制备和性能测定 |
|
EN ISO 7799-2000 |
金属材料厚度3mm或小于3mm的板材或带材反向弯曲试验 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
EN ISO 780-1999 |
包装货物搬运的图形标志 |
Packaging - Pictorial marking for handling of goods (ISO 780:1997) |
EN ISO 7808-1998 |
塑料热固性模塑材料传递流动性的测定 |
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992) |
EN ISO 7822-1999 |
玻璃纤维增强塑料孔隙率的测定烧失量、机械粉碎和静态计数法 |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990) |
EN ISO 7823-1-2003 |
塑料聚甲基丙烯酸甲脂板材类型、尺寸和特性第1部分:浇注薄板材 |
Plastics - Poly(methyl methacrylate) sheets; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
EN ISO 7823-2-2003 |
塑料聚甲基丙烯酸甲脂板材类型、尺寸和特性第2部分:挤塑片 |
Plastics - Poly(methyl methacrylate) sheets; Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯薄板.类型、尺寸和特性.第3部分:连续浇铸板 |
|
EN ISO 7837-2000 |
料肥细粒肥料堆密度(松)测定 |
Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992) |
EN ISO 7840-2004 |
小艇.耐火燃油软管 |
|
EN ISO 7854-1997 |
橡胶或塑料涂覆织物耐弯曲损坏性的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995) |
EN ISO 787-10-1995 |
颜料和体质颜料的通用试验方法第10部分:密度测定比重瓶法 |
General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993) |
EN ISO 787-11-1995 |
颜料和体质颜料的通用试验方法第11部分:压实容积和压实后表观密度的测定 |
General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981) |
EN ISO 787-13-2002 |
颜料和添加剂的通用试验方法第13部分:水溶性硫酸盐、氯化物和硝酸盐的测定 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002) |
EN ISO 787-14-2002 |
颜料和添加剂的通用试验方法第14部分:水萃取物电阻率的测定 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002) |
EN ISO 787-15-1995 |
颜料和体质颜料的通用试验方法第15部分:同类有色颜料耐光性的比较 |
General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:1986) |
EN ISO 787-16-1995 |
颜料和体质颜料的通用试验方法第16部分:相对着色力(或等效着色值)和着色颜料还原后的色度测定目视比较 |
General methods of test for pigments and extenders - Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method (ISO 787-16:1986) |