标准号 |
中文名称 |
英文名称 |
| ISO 4117-1993 |
空运和空运/地面运输用货盘.规范和试验 |
(Air and air/land cargo pallets; specification and testing) |
| ISO 4118 Technical Corrigendum 1-1999 |
空中运输用的未经认可的底舱集装箱.规范和试验.勘误1 |
(Non-certified lower-deck containers for air transport - Specification and testing; Technical Corrigendum 1) |
| ISO 4118-1996 |
空中运输用的未经认可的底舱集装箱.规范和试验 |
(Non-certified lower-deck containers for air transport - Specification and testing) |
| ISO 4119-1995 |
纸浆.浆料浓度的测定 |
(Pulps - Determination of stock concentration) |
| ISO 4120-1983 |
感官分析.方法学.三角试验 |
(Sensory analysis; Methodology; Triangular test) |
| ISO 4120-2004 |
感官分析.方法学.三角试验 |
|
| ISO 4121-1987 |
感官分析.方法学.用秤法评价食品 |
(Sensory analysis; Methodology; Evaluation of food products by methods using scales) |
| ISO 4121-2003 |
感官分析.定量反应尺度的使用指南 |
|
| ISO 4123-1979 |
皮带输送机.承载托辊缓冲环和托辊的反向轮盘.主要尺寸 |
Belt conveyors; Impact rings for carrying idlers and discs for return idlers; Main dimensions |
| ISO 4124-1994 |
液态烃类.动测量.容量计系统的统计控制 |
(Liquid hydrocarbons - Dynamic measurement - Statistical control of volumetric metering systems) |
| ISO 4125-1991 |
干果和果干.定义和术语 |
(Dry fruits and dried fruits; definitions and nomenclature) |
| ISO 4126-1-1991 |
安全阀.第1部分:通用要求 |
(Safety valves; part 1: general requirements) |
| ISO 4126-1-2004 |
过压保护安全设备.第1部分:安全阀 |
|
| ISO 4126-2-2003 |
过压保护安全设备.第2部分:防爆板安全设备 |
(Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices) |
| ISO 4126-2-2003 |
过压保护安全设备.第2部分:防爆板安全设备 |
|
| ISO 4126-4-2004 |
过压保护安全设备.第4部分:液压控制安全阀 |
|
| ISO 4126-5-2004 |
过压保护安全设备.第5部分:可控安全减压系统(CSPRS) |
|
| ISO 4126-6-2003 |
过压保护安全设备.第6部分:防爆板安全设备的应用、选择和安装 |
|
| ISO 4126-7-2004 |
过压保护安全设备.第7部分:通用数据 |
|
| ISO 4127-1-1979 |
造船.内河航行.导缆器.第1部分:双吊线夹板导缆器 |
(Shipbuilding; Inland navigation; Fairleads; Part 1 : Two-lip fairleads) |
| ISO 4127-2-1980 |
造船.内河船舶.导缆器.第2部分:滚筒式导缆器 |
(Shipbuilding; Inland vessels; Fairleads; Part 2 : Roller fairleads) |
| ISO 4128-1985 |
飞机.按空运标准型式制造的集装箱 |
(Aircraft; Air mode modular containers) |
| ISO 4129-1990 |
机动脚踏两用车.控制装置、指示器和信号装置的符号 |
(Mopeds; symbols for controls, indicators and tell-tales) |
| ISO 413-1974 |
飞机.润滑油加油管嘴的头 |
(Aircraft; Heads of lubricating nipples) |
| ISO 4130-1978 |
道路车辆.三维基准系统和基准符号.定义 |
(Road vehicles; Three-dimensional reference system and fiducial marks; Definitions) |
| ISO 4131-1979 |
道路车辆.轿车的尺寸代码 |
(Road vehicles; Dimensional codes for passenger cars) |
| ISO 4132-1979 |
压力管用未增塑聚氯乙烯(PVC)和金属的接头配件装接长度和螺纹尺寸.米制系列 |
(Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series) |
| ISO 4133-1979 |
肉和肉制品.葡萄酸-δ-内酯含量的测定(参考法) |
(Meat and meat products; Determination of glucono-delta-lactone content (Reference method)) |
| ISO 4134-1999 |
肉和肉制品.L-(+)-谷氨酸含量的测定.参比法 |
(Meat and meat products - Determination of L-(+)-glutamic acid content - Reference method) |
| ISO 4135-2001 |
麻醉和呼吸设备.词汇 |
(Anaesthetic and respiratory equipment - Vocabulary) |
| ISO 4136-2001 |
金属材料焊接的破坏试验.横向抗拉试验 |
(Destructive tests of welds in metallic materials - Traverse tensile test) |
| ISO 4138-1996 |
客车.稳态环行驱动.开式环行试验程序 |
(Passenger cars - Steady-state circular driving behaviour - Open-loop test procedure) |
| ISO 4138-2004 |
乘用车.稳态环行驾驶.开环试验程序 |
|
| ISO 4139-1979 |
硅铁合金.铝含量的测定.火焰原子吸收光谱测定法 |
(Ferrosilicon; determination of aluminium content; Flame atomic absorption spectrometric method) |
| ISO 4140-1979 |
铬铁和硅铬铁.铬含量的测定.电位滴定法 |
(Ferrochromium and ferrosilicochromium; Determination of chromium content; Potentiometric method) |
| ISO 4141-1-1998 |
道路车辆.多芯连接电缆.第1部分:基本性能护套电缆的要求和试验方法 |
(Road vehicles - Multicore connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables) |
| ISO 4141-2-1998 |
道路车辆.多芯连接电缆.第2部分:基本性能护套电缆的要求和试验方法 |
(Road vehicles - Multicore connecting cables - Part 2: Test methods and requirements for high performance sheathed cables) |
| ISO 4141-3 Technical Corrigendum 1-1999 |
道路 车辆.多芯连接电缆.第3部分:非屏蔽的护套低压电缆的结构、尺寸和标记.技术勘误1 |
Road vehicles - Multicore connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables; Technical Corrigendum 1 |
| ISO 4141-3-1998 |
道路车辆.多芯连接电缆. 第3部分:非屏蔽的护套低压电缆的制造、尺寸和标记 |
Road vehicles - Multicore connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
| ISO 4141-4-2001 |
道路车辆.多芯连接电缆.第4部分:装芯电缆组件联接试验方法和要求 |
Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies |
| ISO 4142-2002 |
实验室玻璃器皿.试管 |
Laboratory glassware - Test tubes |
| ISO 4143-1981 |
造船.内河船舶.敞蓬式划桨救生艇 |
Shipbuilding; Inland vessels; Open rowing lifeboats |
| ISO 4144-2003 |
管道系统.符合ISO 7/1螺纹标准的不锈钢配件 |
(Pipework - Stainless steel fittings threaded in accordance with ISO 7-1 ) |
| ISO 4144-2003 |
管道系统.符合ISO 7/1螺纹标准的不锈钢配件 |
|
| ISO 4145-1986 |
符合ISO 7/1螺纹标准的非合金钢配件 |
Non-alloy steel fittings threaded to ISO 7/1 |
| ISO 4147-1997 |
航空航天.六角开槽(槽顶),标定高度,标定交叉平面,带MJ 螺纹的螺母.强度类别1100MPa,最高工作温度 120℃;600MPa,最高工作温度 235℃;900MPa,最高工作温度 425℃;1100MPa,最高工作温度 235℃;1100MPa,最高工作温度 315℃;1100MPa,最高工作温度 650℃;1210MPa,最高工作温度 730℃ |
Aerospace - Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 C,600 MPa (at ambient temperature)/235 C, 900 MPa (at ambient temperature)/425 C, 1100 MPa (at a |
| ISO 4148-1998 |
道路车辆.专用警告信号灯.尺寸 |
Road vehicles - Special warning lamps - Dimensions |
| ISO 4148-2004 |
道路车辆.专用警示信号灯.尺寸 |
|
| ISO 4149-1980 |
生咖啡.用嗅觉和视觉检验和测定杂质和缺陷 |
Green coffee; Olfactory and visual examination and determination of foreign matter and defects |
| ISO 415-1975 |
信封、明信片和类似制品.盖邮戳区 |
Envelopes, postcards and similar articles; Cancellation area |
| ISO 4150-1991 |
生咖啡.粒度分析.人工筛分 |
(Green coffee; size analysis; manual sieving) |
| ISO 4151-1987 |
道路车辆.轻便摩托车.控制器的型号、定位和功能 |
(Road vehicles; Mopeds; Type, location and functions of controls) |
| ISO 4153-1981 |
飞机.压力燃料的分配系统.关闭脉动压力的试验程序和极限值 |
(Aircraft; Pressure fuel dispensing system; Test procedure and limit value for shut-off surge pressure) |
| ISO 4156 AMD 1-1992 |
圆柱渐开线花键.米制模数.侧面配合.概述.尺寸和检验.修改1,第3节:检验 |
(Straight cylindrical involute splines; metric module, side fit; generalities, dimensions and inspection; amendment 1; section 3: inspection) |
| ISO 4156-1981 |
圆柱渐开线花键.侧面配合的米制模数.概述,尺寸和检验 |
(Straight cylindrical involute splines; Metric module, side fit; Generalities, dimensions and inspection) |
| ISO 4157-1-1998 |
建筑制图.命名体制.第1部分:建筑物和建筑物各部分 |
(Construction drawings - Designation systems - Part 1: Buildings and parts of buildings) |
| ISO 4157-2-1998 |
建筑制图.命名体制.第2部分:房间名称与号码 |
(Construction drawings - Designation systems - Part 2: Room names and numbers) |
| ISO 4157-3-1998 |
建筑制图.命名体制.第3部分:房间识别 |
(Construction drawings - Designation systems - Part 3: Room identifiers) |
| ISO 4158-1978 |
硅铁合金、硅锰铁和硅铬铁.硅含量的测定.重量分析法 |
(Ferrosilicon, ferrosilicomanganese and ferrosilicochromium; Determination of silicon content; Gravimetric method) |
| ISO 4159-1978 |
锰铁和硅锰铁.锰含量的测定.电位滴定法 |
(Ferromanganese and ferrosilicomanganese; Determination of manganese content; Potentiometric method) |
| ISO 416-1974 |
风景明信片.通讯地址专用区 |
(Picture postcards; Area reserved for the address) |
| ISO 4161-1999 |
带法兰的六角螺母.粗螺纹 |
(Hexagon nuts with flange - Coarse thread) |
| ISO 4162-1990 |
法兰六角螺栓.小型系列 |
(Hexagon flange bolts; small series) |
| ISO 4164-1978 |
道路车辆.轻便摩托车.发动机试验规程.净功率 |
(Road vehicles; Mopeds; Engine test code; Net power) |
| ISO 4165-2001 |
道路车辆.电气连接装置.双极连接 |
(Road vehicles - Electrical connections - Double-pole connection) |
| ISO 4167-1979 |
绳索和绳索制品.聚烯烃农用细绳 |
(Ropes and cordage; Polyolefin agricultural twines) |
| ISO 4168-2002 |
时间测量仪表.辐射发光镀层检验的条件 |
(Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits) |
| ISO 4170-1995 |
空中货运设备.空运托盘网 |
(Air cargo equipment - Interline pallet nets) |
| ISO 4171-1993 |
空中货运设备.联运托盘 |
(Air cargo equipment; interline pallets) |
| ISO 4172-1991 |
技术制图.建筑制图.预制结构组装件制图 |
(Technical drawings; construction drawings; drawings for the assembly of prefabricated structures) |
| ISO 4173-1980 |
钼铁.钼含量的测定.重量分析法 |
(Ferromolybdenum; Determination of molybdenum content; Gravimetric method) |
| ISO 4174-1998 |
谷类,含油种子和豆类.单向气流通过批量谷物而引起的单位压力损失的测定 |
(Cereals, oilseeds and pulses - Measurement of unit pressure loss in one-dimensional air flow through bulk grain) |
| ISO 4175-1979 |
造船.船载驳船,第1系列.主要尺寸 |
(Shipbuilding; Shipborne barges, series 1; Main dimensions) |
| ISO 4176-1981 |
肥料.硝酸氮含量的测定.硝酸试剂重量分析法 |
(Fertilizers; Determination of nitrate nitrogen content; Nitron gravimetric method) |
| ISO 4178-1980 |
满装的运输包装.分类检验.要记录的信息 |
(Complete, filled transport packages; Distribution trials; Information to be recorded) |
| ISO 4179-1985 |
耐压球墨铸铁管和常压管路.水泥砂浆离心衬里.一般要求 |
(Ductile iron pipes for pressure and non-pressure pipelines; Centrifugal cement mortar lining; General requirements) |
| ISO 418-2001 |
摄影.冲洗用药液.无水亚硫酸钠规范 |
(Photography - Processing chemicals - Specifications for anhydrous sodium sulfite) |
| ISO 4180-1-1980 |
满装的运输包装.性能试验计划编制的一般规则.第1部分:一般原则 |
(Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 1 : General principles) |
| ISO 4180-2-1980 |
满装的运输包装.性能试验计划表编制的一般规则.第2部分:定量的数据 |
(Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 2 : Quantitative data) |
| ISO 4182-1999 |
汽车.前照灯光束角度随载荷变化的测量 |
(Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load) |
| ISO 4183-1995 |
皮带传动.标准的和窄型三角皮带.皮带轮 |
(Belt drives - Classical and narrow V-belts - Grooved pulleys (system based on datum width)) |
| ISO 4184-1992 |
皮带传动.标准和窄三角皮带.标准长度 |
(Belt drives; classical and narrow V-belts; lengths in datum system) |
| ISO 4185 Technical Corrigendum 1-1993 |
封闭管道内液体流量的测量.重量法.技术勘误1 |
(Measurement of liquid flow in closed conduits; weighing method; technical corrigendum 1) |
| ISO 4185-1980 |
封闭管道内液体流量的测量.称重法 |
(Measurement of liquid flow in closed conduits; Weighing method) |
| ISO 4186-1980 |
芦笋.贮存指南 |
(Asparagus; Guide to storage) |
| ISO 4187-1980 |
辣根.贮存指南 |
(Horse-radish; Guide to storage) |
| ISO 4190-1-1999 |
电梯安装.第1部分:I,II,III和VI类电梯 |
(Lift (US: Elevator) installation - Part 1: Class I, II, III and VI lifts) |
| ISO 4190-2-2001 |
电梯安装.第2部分:Ⅳ类电梯 |
(Lift (US: Elevator) installation - Part 2: Class IV lifts) |
| ISO 4190-3-1982 |
载客电梯设施.第3部分:Ⅴ级服务电梯 |
(Passenger lift installations; Part 3 : Service lifts class V) |
| ISO 4190-5-1987 |
电梯和服务电梯(美国:电梯和小型送货电梯).第5部分:控制装置、信号和附属装备 |
(Lifts and service lifts (USA: Elevators and dumbwaiters); Part 5 : Control devices, signals and additional fittings) |
| ISO 4190-6-1984 |
电梯和服务电梯(美国:电梯和小型送货电梯).第6部分:安装在住宅楼内的载客电梯.计划和选用 |
(Lifts and service lifts (USA : elevators and dumbwaiters); Part 6 : Passenger lifts to be installed in residential buildings; Planning and selection) |
| ISO 4192-1981 |
铝和铝合金.铅含量的测定.火焰原子吸收光谱测定法 |
(Aluminium and aluminium alloys; Determination of lead content; Flame atomic absorption spectrometric method) |
| ISO 4193-1981 |
铝和铝合金.铬含量的测定.火焰原子吸收光谱测定法 |
(Aluminium and aluminium alloys; Determination of chromium content; Flame atomic absorption spectrometric method) |
| ISO 4194-1981 |
镁合金.锌合量的测定.火焰原子吸收光谱测定法 |
(Magnesium alloys; Determination of zinc content; Flame atomic absorption spectrometric method) |
| ISO 4195-1-1987 |
输送带.耐热性.第1部分:试验方法 |
(Conveyor belts; Heat resistance; Part 1 : Test method) |
| ISO 4195-2-1988 |
输送带.耐热性.第2部分:规范 |
(Conveyor belts; heat resistance; part 2: specifications) |
| ISO 4197-1989 |
土壤耕作设备.推土铲.固定尺寸 |
(Equipment for working the soil; hoe blades; fixing dimensions) |
| ISO 4198-1984 |
表面活性剂.器皿人工洗涤剂.性能比较试验指南 |
(Surface active agents; Detergents for hand dishwashing; Guide for comparative testing of performance) |
| ISO 420-1994 |
摄影.照相用化学药品.溴化钾规范 |
(Photography - Processing chemicals - Specifications for potassium bromide) |
| ISO 4200-1991 |
焊接和无缝平端钢管.管的尺寸和单位长度重量的一览表 |
(Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length) |
| ISO 4202-1978 |
莫氏锥柄刀具用的外锥度为7/24的缩径套筒 |
(Reduction sleeves with external 7/24 taper for tools with Morse taper shanks) |
| ISO 4203-1978 |
直柄刀具.传动榫和插孔.尺寸 |
(Parallel shank tools; Driving tenons and sockets; Dimensions) |
| ISO 4204-1977 |
有莫氏锥柄和可拆式导销90°尖底锪钻 |
(Countersinks, 90 degrees, with Morse taper shanks and detachable pilots) |
| ISO 4205-1991 |
直柄实心导杆90°埋头钻 |
(Countersinks 90? with parallel shanks and solid pilots) |
| ISO 4206-1991 |
直柄实心导杆平头钻 |
(Counterbores with parallel shanks and solid pilots) |
| ISO 4207-1977 |
莫氏锥柄和可拆导销的平底锪钻 |
(Counterbores with Morse taper shanks and detachable pilots) |
| ISO 4208-1977 |
平底锪钻和90°尖底锪钻共用的可拆导销.尺寸 |
(Detachable pilots for use with counterbores and 90 degrees countersinks; Dimensions) |
| ISO 4209-1-2001 |
载重汽车和公共汽车轮胎和轮辋(米制系列).第1部分:轮胎 |
(Truck and bus tyres and rims (metric series) - Part 1: Tyres) |
| ISO 4209-2-2001 |
载重汽车和客车的轮胎和轮辋(米制系列).第2部分:轮辋 |
(Truck and bus tyres and rims (metric series) - Part 2: Rims) |
| ISO 4210-1996 |
自行车.自行车的安全要求 |
(Cycles - Safety requirements for bicycles) |
| ISO 4211-1979 |
家具.表面抗冷液体性能的评定 |
(Furniture; Assessment of surface resistance to cold liquids) |
| ISO 4211-2-1993 |
家具.表面试验.第2部分:耐湿热性能的评定 |
(Furniture; tests for surfaces; part 2: assessment of resistance to wet heat) |
| ISO 4211-4-1988 |
家具.表面试验.第4部分:耐冲击性评估 |
(Furniture; Tests for surfaces; part 4: assessment of resistance to impact) |
| ISO 4217 Technical Corrigendum 1-2004 |
货币和资金的表示代码.技术勘误1 |
|
| ISO 4217-2001 |
货币和资金的表示代码 |
(Codes for the representation of currencies and funds) |
| ISO 4219-1979 |
空气质量.环境空气中气体硫化混合物的测定.取样设备 |
(Air quality; Determination of gaseous sulphur compounds in ambient air; Sampling equipment) |
| ISO 422-1994 |
摄影.照相用化学药品.硫酸对甲基氨苯酚酯规范 |
(Photography - Processing chemicals - Specifications for p-methylaminophenol sulfate) |
| ISO 4220-1983 |
环境空气.气态酸性空气污染指标的测定.用指示器或端点电势探测的滴定法 |
(Ambient air; Determination of a gaseous acid air pollution index; Titrimetric method with indicator or potentiometric end-point detection) |
| ISO 4221-1980 |
空气质量.环境空气中二氧化硫质量浓度的测定.钍试剂分光光度测定法 |
(Air quality; Determination of mass concentration of sulphur dioxide in ambient air; Thorin spectrophotometric method) |
| ISO 4223-1-2002 |
轮胎工业用一些术语的定义.第1部分:充气轮胎 |
(Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com