标准号 |
中文名称 |
英文名称 |
ISO 9845-1-1992 |
太阳能.地面不同接收条件下标准太阳光谱辐射.第1部分:空气质量1.5直接垂直标准和半球状太阳辐射 |
(Solar energy; reference solar spectral irradiance at the ground at different receiving conditions; part 1: direct normal and hemispherical solar irradiance for air mass 1,5) |
ISO 9847-1992 |
太阳能.与标准日射强度计比对校准野外日射强度计 |
(Solar energy; calibration of field pyranometers by comparison to a reference pyranometer) |
ISO 9848 Technical Corrigendum 1-1994 |
摄影技术.源文件缩微胶卷.ISO 感光度和ISO 平均对比度的测定.技术勘误1 |
(Photography; source document microfilms; determination of ISO speed and ISO average gradient; technical corrigendum 1) |
ISO 9848-2003 |
摄影.原始文件缩微胶片.ISO感光速度和ISO平均梯度的测定 |
(Photography - Source document microfilms - Determination of ISO speed and ISO average gradient ) |
ISO 9848-2003 |
摄影.原始文件缩微胶片.ISO感光速度和ISO平均梯度的测定 |
|
ISO 9849-2000 |
光学和光学仪器.大地测量和测绘仪器.词汇 |
(Optics and optical instruments - Geodetic and surveying instruments - Vocabulary) |
ISO 9851-1990 |
连续机械装卸设备.架空电动单轨输送机.定义和安全规则 |
(Continuous mechanical handling equipment; overhead electrical monorail conveyors; definitions and safety rules) |
ISO 9852-1995 |
未增塑聚氯乙烯管.在规定温度下抗二氯甲烷腐蚀的性能(DCMT). 二氯甲烷的试验方法 |
(Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method) |
ISO 9853-1991 |
压力管道装置用喷射铸造未增塑聚氯乙烯配件的破碎试验 |
(Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing test) |
ISO 9854-1-1994 |
运输液体用热塑性塑料管.利用却贝法测定摆动冲击强度试验.第1部分:一般试验方法 |
(Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method) |
ISO 9854-2-1994 |
运输液体用热塑性塑料管.利用却贝法测定摆动冲击强度试验.第2部分:不同材料制管的试验条件 |
(Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials) |
ISO 9855-1993 |
环境空气.从滤器中收集到的悬浮粒气体中铅粒含量的测定.原子吸收光谱测定法 |
(Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method) |
ISO 9856-1989 |
输送带.弹性模数的测定 |
(Conveyor belts; determination of elastic modulus) |
ISO 9856-2003 |
输送带.弹性和固定延伸率的测定和弹性模量的计算 |
|
ISO 9862-1990 |
土工织物.取样和试样的制备 |
(Geotextiles; sampling and preparation of test specimens) |
ISO 9863-2-1996 |
土工织物和相关产品.特定压力下厚度的测定.第2部分:多层制品的单层厚度测定程序 |
(Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products) |
ISO 9864-1990 |
土工织物.单位面积质量(物质)的测定 |
(Geotextiles; determination of mass per unit area) |
ISO 9865-1991 |
纺织品.用邦迪斯门雨淋试验对织物拒水性的测定 |
(Textiles; determination of water repellency of fabrics by the Bundesmann rain-shower test) |
ISO 9866-1-1991 |
纺织品.低压下干热对织物的影响.第1部分:织物干热处理程序 |
(Textiles; effect of dry heat on fabrics under low pressure; part 1: procedure for dry-heat treatment of fabrics) |
ISO 9866-2-1991 |
纺织品.低压下干热对织物的影响.第2部分:干热下织物尺寸变化的测定 |
(Textiles; effect of dry heat on fabrics under low pressure; part 2: determination of dimensional change in fabrics exposed to dry heat) |
ISO 9867-1991 |
纺织品.织物除皱的评定.表观法 |
(Textiles; evaluation of the wrinkle recovery of fabrics; appearance method) |
ISO 9869-1994 |
热绝缘.建筑部件.热阻及热传导的现场测量 |
(Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance) |
ISO 9873 Technical Corrigendum 1-2000 |
牙科手动设备.可重复使用的镜子和手柄.技术勘误1 |
(Dental hand instruments - Reusable mirrors and handles; Technical Corrigendum 1) |
ISO 9873-1998 |
牙科手动器械.可重复使用的镜子和手柄 |
(Dental hand instruments - Reusable mirrors and handles) |
ISO 9874-1992 |
牛奶.总磷含量的测定.分子吸收光谱测定法 |
(Milk; determination of total phosphorus content; method using molecular absorption spectrometry) |
ISO 9875-2000 |
船舶技术.船用回声探测设备 |
(Ships and marine technology - Marine echo-sounding equipment) |
ISO 9876-1997 |
船舶和航海技术.气象图用航海传真接收机 |
(Ships and marine technology - Marine facsimile receivers for meteorological charts) |
ISO 9878-1990 |
缩微摄影技术.缩微影片摄制用的图形符号 |
(Micrographics; graphical symbols for use in microfilming) |
ISO 9882-1993 |
建筑物性能标准.在没有预浇负载情况下的预制钢盘钢筋混凝土地板的性能试验 |
(Performance standards in building; performance test for precast concrete floors; behaviour under non-concentrated load) |
ISO 9883-1993 |
建筑物性能标准.在有预浇负载情况下的预制钢盘钢筋混凝土地板的性能试验 |
(Performance standards in building; performance test for precast concrete floors; behaviour under concentrated load) |
ISO 9884-1-1994 |
茶叶袋规范.第1部分:托盘和集装箱运输茶叶用的标准袋 |
(Tea sacks - Specification - Part 1: Reference sack for palletized and containerized transport of tea) |
ISO 9884-2-1999 |
茶叶袋规范.第1部分:托盘和集装箱运输茶叶用袋的性能规范 |
(Tea sacks - Specification - Part 2: Performance specification for sacks for palletized and containerized transport of tea) |
ISO 9885-1991 |
广口玻璃容器.顶部密封表面的平面度偏差.试验方法 |
(Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods) |
ISO 9886-1992 |
用生理测量法评定热应变 |
(Evaluation of thermal strain by physiological measurements) |
ISO 9886-2004 |
人类工效学.热应变的生理学测量评价 |
|
ISO 9887-1992 |
水质.含水介质中有机物化合物需氧生物降解性的评定.半连续激活污泥法(SCAS) |
(Water quality; evaluation of the aerobic biodegradability of organic compounds in an aqueous medium; semi-continuous activated sludge method (SCAS)) |
ISO 9888-1999 |
水质.含水介质中有机化合物需氧生物降解性的评定.静态试验(Zahn-Weuens法) |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method)) |
ISO 9889-1994 |
二氧化铀粉末和二氧化铀烧结丸的碳含量的测定.电阻炉的燃烧.滴定法/库仑法/红外线吸收分析法 |
(Determination of carbon content in uranium dioxide powder and sintered pellets - Resistance furnace combustion - Titrimetric/coulometric/infrared absorption method) |
ISO 9891-1994 |
二氧化铀粉末和烧结丸中碳含量的测定.高频感应燃烧炉.滴定法/库仑法/红外线吸收法 |
(Determination of carbon content in uranium dioxide powder and sintered pellets - High-frequency induction furnace combustion - Titrimetric/coulometric/infrared absorption methods) |
ISO 9892-1992 |
铀金属.二氧铀粉末与二氧化铀小球和硝酸铀酸溶液.氟含量的测定.氟化物离子选择电极法 |
(Uranium metal, uranium dioxide powder and pellets, and uranyl nitrate solutions; determination of fluorine content; fluoride ion selective electrode method) |
ISO 9894-1996 |
在液相中六氟化铀二次进样法 |
(Subsampling of uranium hexafluoride in the liquid phase) |
ISO 9895-1989 |
纸和纸板.抗压强度.窄幅试验 |
(Paper and board; compressive strength; short span test) |
ISO 9896-1996 |
建筑物内排放管道系统用塑料存水弯管 |
(Plastics traps for discharge pipework systems inside buildings) |
ISO 9897 Technical Corrigendum 1-2001 |
货物容器.容器设备数据交换(CEDE).一般通信编码.技术勘误1 |
(Freight containers - Container equipment data exchange (CEDEX) - General communication codes; Technical Corrigendum 1) |
ISO 9897-1997 |
货运集装箱.集装箱要求的数据交换.(CECEX):一般通信代码 |
(Freight containers - Container equipment data exchange (CEDEX) - General communication codes) |
ISO 9898-2000 |
作物保护设备.丛生灌木和乔木作物用空气助动喷射装置 |
(Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops) |
ISO 990-1973 |
工业用氢氧化钾.检定法 |
(Potassium hydroxide for industrial use; Method of assay) |
ISO 9902-1-2001 |
纺织机械.噪声试验规程.第1部分:通用要求 |
(Textile machinery - Noise test code - Part 1: Common requirements) |
ISO 9902-2-2001 |
纺织机械.噪声试验规程.第2部分:纺纱准备和纺纱机械 |
(Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery) |
ISO 9902-3-2001 |
纺织机械.噪声试验规程.第3部分:非纺织机械 |
(Textile machinery - Noise test code - Part 3: Nonwoven machinery) |
ISO 9902-4-2001 |
纺织机械.噪声试验规程.第4部分:纱的加工、缆索和绳制造用机械 |
(Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery) |
ISO 9902-5-2001 |
纺织机械.噪声试验规程.第5部分:织造和针织用准备机械 |
(Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery) |
ISO 9902-6-2001 |
纺织机械.噪声试验规程.第6部分:制布机械 |
(Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery) |
ISO 9902-7-2001 |
纺织机械.噪声试验规程.第7部分:染色和精整机械 |
(Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery) |
ISO 9903-1-2003 |
纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第1部分:无互联锁或链接的底边 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining) |
ISO 9903-1-2003 |
纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第1部分:无互联锁或链接的底边 |
|
ISO 9903-2-2003 |
纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第2部分:有互链接的底边 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 2: Foot with interchaining) |
ISO 9903-2-2003 |
纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第2部分:有互链接的底边 |
|
ISO 9904-2000 |
纺织机械和附件.预纺纱和纺纱机用钢针 |
(Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery) |
ISO 9905-1994 |
离心泵的技术规范.1类 |
(Technical specifications for centrifugal pumps - Class I) |
ISO 9906-1999 |
旋转动力泵.液压性能验收试验.等级1和2 |
(Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2) |
ISO 9908-1993 |
离心泵的技术规范.类别III |
(Technical specifications for centrifugal pumps; class III) |
ISO 9909-1997 |
鼠尾草油(药房常备的鼠尾草) |
(Oil of dalmatian sage (Salvia officinalis L.)) |
ISO 9910-1991 |
甜橙油.全部类胡罗卜素含量的测定 |
(Oil of sweet orange; determination of the total carotenoids content) |
ISO 9911-1993 |
农业灌溉设备.手工操做小型塑料阀门 |
(Agricultural irrigation equipment; manually operated small plastics valves) |
ISO 9912-1-2004 |
农业灌溉设备.微灌溉用过滤器.第1部分:术语、定义和分类 |
|
ISO 9912-2-1992 |
农业灌溉设备.过滤器.第2部分:筛网型过滤器 |
(Agricultural irrigation equipment; filters; part 2: strainer-type filters) |
ISO 9912-3-1992 |
农业灌溉设备.过滤器.第3部分:自动清洁筛网型过滤器 |
(Agricultural irrigation equipment; filters; part 3: automatic self-cleaning strainer-type filters) |
ISO 9913-1-1996 |
光学和光学仪器.接触镜片.第1部分:用FATT法对氧气的渗透性和可透性的测定 |
(Optics and optical instruments - Contact lenses - Part 1: Determination of oxygen permeability and transmissibility by the FATT method) |
ISO 9913-2-2000 |
光学和光学仪器.接触镜片.第2部分:用库仑法测定氧的渗透性和可传性 |
(Optics and optical instruments - Contact lenses - Part 2: Determination of oxygen permeability and transmissibility by the coulometric method) |
ISO 9914-1995 |
光学及光学仪器.接触镜片.接触镜片材料折射指数的测定 |
(Optics and optical instruments - Contact lenses - Determination of refractive index of contact lens materials) |
ISO 9915-1992 |
铝合金铸件.X射线照相试验 |
(Aluminium alloy castings; radiography testing) |
ISO 9916-1991 |
铝合金和镁合金铸件.液体渗透检验 |
(Aluminium alloy and magnesium alloy castings; liquid penetrant inspection) |
ISO 9917 Technical Corrigendum 1-1993 |
牙科用水基胶粘剂.技术勘误1 |
(Dental water-based cements; technical corrigendum 1) |
ISO 9917-1-2003 |
牙科.水基胶粘剂.第1部分:酸基粘固粉/液 |
(Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements) |
ISO 9917-1-2003 |
牙科.水基胶粘剂.第1部分:酸基粘固粉/液 |
|
ISO 9917-1991 |
牙科用水基胶粘剂 |
(Dental water-based cements) |
ISO 9917-2-1998 |
牙科用水基粘结剂.第2部分:光敏粘结剂 |
(Dental water-based cements - Part 2: Light-activated cements) |
ISO 9918-1993 |
人用烟雾测定计.要求 |
(Capnometers for use with humans; requirements) |
ISO 9919-1992 |
医用脉冲血氧定量计.要求 |
(Pulse oximeters for medical use; requirements) |
ISO 992-1975 |
工业用氢氧化钾.氯化物含量的测定.汞液滴定法 |
(Potassium hydroxide for industrial use; Determination of chlorides content; Mercurimetric method) |
ISO 9920-1995 |
热环境中的人类工效学.衣服的隔热和抗蒸发的评价 |
(Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble) |
ISO 9921-1-1996 |
语言通信的人类工效学评定.第1部分:在接通话中(用谈话语言干扰级别法)有标准听话能力人的谈话语言干扰级别 |
(Ergonomic assessment of speech communication - Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)) |
ISO 9921-2003 |
人类工效学.语音通讯的评定 |
|
ISO 9923-1994 |
显微摄影.透明的A6缩微胶片.图像安排 |
(Micrographics; transparent A6 microfiche; image arrangements) |
ISO 9924-1-2000 |
橡胶和橡胶制品.利用热解重量分析法测定硫化和未硫化化合物的成分.第1部分:丁二烯、乙烯-丙烯共聚物和沅共 |
(Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers) |
ISO 9924-2-2000 |
橡胶和橡胶制品.利用热重分析法测定硫化和未硫化化合物的成分.第1部分:丙烯晴丁二烯和丁基卤橡胶 |
(Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by hermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers) |
ISO 9926-1-1990 |
起重机.起重机操作员的训练.第1部分:总则 |
(Cranes; training of drivers; part 1: general) |
ISO 9927-1-1994 |
起重机的检验.第1部分:总则 |
(Cranes - Inspections - Part 1: General) |
ISO 9928-1-1990 |
起重机.操作手册.第1部分:总则 |
(Cranes; crane driving manual; part 1: general) |
ISO 9930-1993 |
绿豆.储存和冷藏运输 |
(Green beans; storage and refrigerated transport) |
ISO 9931-1991 |
煤.直接燃烧煤时煤气中携带粉煤的取样 |
(Coal; sampling of pulverized coal conveyed by gases in direct fire coal systems) |
ISO 9932-1990 |
纸和纸板.板材水蒸汽传递率的测定.动吹和静气法 |
(Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods) |
ISO 9933 AMD 1-2004 |
纤维增强水泥制品.屋面和覆盖用大波瓦或非对称截面瓦和配件.修改件1 |
|
ISO 9933-1995 |
纤维加强水泥制品.屋顶和镶面(建筑物)长波纹或不对称的面板和配件 |
(Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding) |
ISO 9934-1-2001 |
无损检验.磁性粒子试验.第1部分:一般原则 |
(Non-destructive testing - Magnetic particle testing - Part 1: General principles) |
ISO 9934-2-2002 |
无损检验.磁粒子试验.第2部分:检测介质 |
(Non-destructive testing - Magnetic particle testing - Part 2: Detection media) |
ISO 9934-3-2002 |
无损检验.磁性粒子试验.第3部分:设备 |
(Non-destructive testing - Magnetic particle testing - Part 3: Equipment) |
ISO 9935-1992 |
无损检验.穿透缺陷检测仪.总技术要求 |
(Non-destructive testing; penetrant flaw detectors; general technical requirements) |
ISO 9936-1997 |
动植物脂肪油.维生素E和三烯甘油脂含量的测定.高性能液体色谱法 |
(Animal and vegetable fats and oils - Determination of tocopherols and tocotrienols contents - Method using high-performance liquid chromatography) |
ISO 9938-1994 |
航空航天.聚四氟乙烯软管总成.204℃/28000KPa类.采购规范 |
(Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/28 000 kPa - Procurement specification) |
ISO 9939-1994 |
航空航天. 压力再加油连接器(新型) |
(Aerospace; pressure re-oiling connection (new type)) |
ISO 9942-1-1994 |
起重机的信息标签.第1部分:总则 |
(Cranes - Information labels - Part 1: General) |
ISO 9942-3-1999 |
起重机.信息标签.第3部分:塔式起重机 |
(Cranes - Information labels - Part 3: Tower cranes) |
ISO 9943-1991 |
造船.带厨具的厨房和配膳室的通风和空气处理设备 |
(Shipbuilding; ventilation and air-treatment of galleys and pantries with cooking appliances) |
ISO 9944 Technical Corrigendum 1-1997 |
塑料.酚醛树脂.树脂萃取物电导率的测定.技术勘误表1 |
(Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts; Technical Corrigendum 1) |
ISO 9944-1990 |
塑料.酚醛树脂.树脂萃取物电导率的测定 |
(Plastics; phenolic resins; determination of electrical conductivity of resin extracts) |
ISO 9946-1999 |
操纵工业机器人.特性表示方法 |
(Manipulating industrial robots - Presentation of characteristics) |
ISO 9947-1991 |
纺织机械和附件.二合一捻线机.词汇 |
(Textile machinery and accessories; two-for-one twisters; vocabulary) |
ISO 9948-1992 |
卡车和公共汽车轮胎.滚动阻力的测定方法 |
(Truck and bus tyres; methods of measuring rolling resistance) |
ISO 9949-1-1993 |
吸尿器材词汇.第1部分:尿失禁的状况 |
(Urine absorbing aids; vocabulary; part 1: conditions of urinary incontinence) |
ISO 9949-2-1993 |
吸尿器材词汇.第2部分:产品 |
(Urine absorbing aids; vocabulary; part 2: products) |
ISO 9949-3-1993 |
吸尿器材词汇.第3部分:产品类型的识别 |
(Urine absorbing aids; vocabulary; part 3: identification of product types) |
ISO 9950-1995 |
工业淬火油.冷却性的测定.镍合金探测试验法 |
(Industrial quenching oils - Determination of cooling characteristics - Nickel-alloy probe test method) |
ISO 9951 Technical Corrigendum 1-1994 |
在密封管中气体流动力的测量.技术勘误表1 |
(Measurement of gas flow in closed conduits - Turbine meters; Technical Corrigendum 1) |
ISO 9951-1993 |
用涡轮表测量密闭风道的气流 |
(Measurement of glas flow in closed conduits; turbine meters) |
ISO 9952-1993 |
农业灌溉设备.止回阀 |
(Agricultural irrigation equipment; check valves) |
ISO 9956-1 AMD 1-1998 |
金属材料焊接程序的认可和规范.第1部分:熔焊的一般规则.第1次修订 |
(Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding; Amendment 1) |
ISO 9956-1-1995 |
金属材料焊接程序的认可和规范.第1部分:熔焊的一般规则 |
(Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding) |
ISO 9956-10-1996 |
金属材料焊接方法的批准和规范.第10部分:电子束焊接方法规范 |
(Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding) |