标准号 |
中文名称 |
英文名称 |
| EN ISO 15703-1999 |
皮革色牢度试验耐揉和洗涤色牢度 |
Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998) |
| EN ISO 15720-2001 |
金属涂层孔隙率试验胶材料电版术法测定金属衬底上金和钯涂层空隙度 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001) |
| EN ISO 15721-2001 |
金属涂层孔隙率试验用亚硫酸和二氧化硫蒸气测定金和钯涂层孔隙率 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001) |
| EN ISO 15744-2002 |
手持非电动工具噪声测量规则工程法(2级) |
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
| EN ISO 15748-1-2002 |
船舶和造船技术船及海上构筑物上饮用供给第1部分：规划和设计 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002) |
| EN ISO 15748-2-2002 |
船舶和造船技术船及海上构筑物上饮用供给第2部分：计算方法 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002) |
| EN ISO 15749-1-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第1部分:卫生排水系统设计 |
|
| EN ISO 15749-2-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道 |
|
| EN ISO 15749-3-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道 |
|
| EN ISO 15749-4-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第4部分:卫生排水和污物处置管 |
|
| EN ISO 15749-5-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第5部分:甲板、货舱和游泳池的排水 |
|
| EN ISO 15755-1999 |
纸和纸板杂质估算 |
Paper and board - Estimation of contraries (ISO 15755:1999) |
| EN ISO 15761-2002 |
石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀 |
Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
| EN ISO 15774-2001 |
动植物油脂用直接石墨炉原子吸收分光光度法测定镉含量 |
Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2000) |
| EN ISO 15783-2003 |
未密封的旋转动态泵II级规范 |
Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002) |
| EN ISO 15785-2002 |
技术制图粘接接头、折叠接头和压接头的符号表示与标示 |
Technical drawings - Symbolic presentation and indication of adhesive, folded and pressed joints (ISO 15785:2002) |
| EN ISO 15788-1-2001 |
动植物脂肪和油植物油中豆甾二烯的测定第1部分：毛细管柱气相色谱法(参考方法) |
Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method) (ISO 15788-1:1999) |
| EN ISO 15788-2-2004 |
动植物脂肪和油.植物油中豆固醇的测定.第2部分:高效液相色谱法 |
|
| EN ISO 15791-1-2004 |
塑料.塑料产品用中等规模燃烧试验的设计和应用.第1部分:一般指南 |
|
| EN ISO 15797-2004 |
纺织材料.工作服检测用工业洗涤和整理规程 |
|
| EN ISO 15798-2001 |
眼科植入物眼科手术粘接器件 |
Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2001) |
| EN ISO 1580-1994 |
开槽盘头螺钉产品等级A级 |
Slotted pan head screws - Product grade A (ISO 1580:1994) |
| EN ISO 15831-2004 |
服饰.生理效应.用热的人体模型法测量隔热性 |
|
| EN ISO 15867-2003 |
装非危险散装货物用中型容器术语 |
Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003) |
| EN ISO 15880-2004 |
色漆、清漆和粘合剂.水基涂料和粘合剂的MEQ值的测定 |
|
| EN ISO 15882-2003 |
保健产品的消毒化学指示剂效果的选择、使用和介绍的指南 |
Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2003) |
| EN ISO 15908-2002 |
热塑塑料管道用胶粘剂胶粘剂热稳定性的测试方法 |
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002) |
| EN ISO 15913-2003 |
水质固相萃取和衍生化作用后气相色谱、质谱法测定包括苯达松和羟基苯甲腈在内的选择性苯氧烷类除草剂注 |
Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000) |
| EN ISO 1597-1999 |
塑料未増塑的乙酸纤维乙酸量的测定 |
Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield (ISO 1597:1994) |
| EN ISO 15973-2000 |
封闭型盘头抽芯盲铆钉AIA/St |
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000) |
| EN ISO 15974-2000 |
封闭型沉头抽芯盲铆钉AIA/St |
Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000) |
| EN ISO 15975-2002 |
带拉断铁心和突头的封端盲铆钉AI/AIA |
Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002) |
| EN ISO 15976-2002 |
带拉断铁心和突头的封端盲铆钉St/St |
Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002) |
| EN ISO 15977-2002 |
带拉断铁心和突头的开端盲铆钉AlA/St |
Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002) |
| EN ISO 15978-2002 |
带拉断铁心和埋头的开端盲铆钉AlA/St |
Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002) |
| EN ISO 15979-2002 |
带拉断铁心和突头的开端盲铆钉St/St |
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002) |
| EN ISO 1598-1999 |
塑料乙酸纤维素不溶物的测定 |
Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990) |
| EN ISO 15980-2002 |
带拉断铁心和埋头的开端盲铆钉St/St |
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002) |
| EN ISO 15981-2002 |
带拉断铁心和突头的开端盲铆钉AlA/AIA |
Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002) |
| EN ISO 15982-2002 |
带拉断铁心和埋头的开端盲铆钉AlA/AIA |
Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002) |
| EN ISO 15983-2002 |
带拉断铁心和突头的开端盲铆钉A2/A2 |
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002) |
| EN ISO 15984-2002 |
带拉断铁心和埋头的开端盲铆钉A2/A2 |
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002) |
| EN ISO 1599-1999 |
塑料乙酸纤维素模塑时粘度降低的测定 |
Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990) |
| EN ISO 1600-1999 |
塑料乙酸纤维素利用热的不同循环在生产模制样品中吸收量的测定 |
Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990) |
| EN ISO 16017-1-2000 |
室内、周围和工作场所空气用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析第1部分： |
Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| EN ISO 16017-2-2003 |
室内、周围和工作场所的空气用吸附管/热解吸/毛细管气相色谱法进行挥发性有机化合物的取样与分析第2部 |
Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003) |
| EN ISO 16021-2000 |
吸尿器材从使用者和护理人员观点对一次性成人不能控制吸尿器材的评价基本原则 |
Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000) |
| EN ISO 16032-2004 |
声学.建筑物服务设备的声压级测量.工程法 |
|
| EN ISO 16048-2003 |
耐蚀不锈钢紧固件的钝化 |
Passivation of corrosion-resistant stainless steel fasteners (ISO 16048:2003) |
| EN ISO 16054-2002 |
外科植入物外科植入物的最小数据组 |
Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2000) |
| EN ISO 16070-2001 |
石油和天然气工业井下设备闭锁心轴和落地短接管 |
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001) |
| EN ISO 16091-2002 |
航天系统整体逻辑支架 |
Space systems - Integrated logistic support (ISO 16091:2002) |
| EN ISO 16101-2004 |
包装.危险货物的运输包装.塑料的兼容性试验 |
|
| EN ISO 16104-2003 |
包装危险货物的运输包装试验方法 |
Packaging - Transport packaging for dangerous goods - Test methods (ISO 16104:2003) |
| EN ISO 16140-2003 |
食品及动物饲料的微生物学交替法确认的协议 |
Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods (ISO 16140:2003) |
| EN ISO 16147-2002 |
小艇内装柴油机装于发动机的燃料及电气件 |
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002) |
| EN ISO 1622-1-1999 |
塑料聚苯乙烯(PS)模塑和挤塑材料第1部分：命名体系和基本规范 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:1994) |
| EN ISO 1622-2-1999 |
塑料聚苯乙烯(PS)模塑和挤塑材料第2部分：试样的制备和性能的测定 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995) |
| EN ISO 1624-2001 |
塑料聚乙烯均聚物和共聚物树脂水中筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001) |
| EN ISO 16264-2004 |
水质.用流动分析(FIA和CFA)法和光度检测法测定可溶性硅酸盐 |
|
| EN ISO 1628-1-1998 |
塑料用毛细管粘度计测定稀溶液中聚合物的粘度第1部分：一般原则 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:1998) |
| EN ISO 1628-2-1998 |
塑料用毛细管粘度计测定稀溶液中聚合物的粘度第2部分：聚氯乙烯树脂 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998) |
| EN ISO 1628-3-2003 |
塑料用毛细管粘度计测定聚合物在稀释溶液中的粘数第３部分：聚乙烯和聚丙烯 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2001) |
| EN ISO 16284-2001 |
眼科光学眼科光学设备的信息交换 |
Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2001) |
| EN ISO 16330-2003 |
往复式正排量泵和泵送装置技术条件 |
Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| EN ISO 16348-2003 |
金属及其他无机涂料有关外观的定义及习惯表示 |
Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003) |
| EN ISO 16408-2004 |
牙科学.口腔卫生产品.口腔清洗 |
|
| EN ISO 16426-2002 |
紧固件质量保证体系 |
Fasteners - Quality assurance system (ISO 16426:2002) |
| EN ISO 16467-2003 |
包装危险货物的运输包装中型散装货物容器(IBCs)的试验方法 |
Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003) |
| EN ISO 16484-2-2004 |
建筑物自动化和控制系统.第2部分:硬件 |
|
| EN ISO 16582-2002 |
带拉断铁心和突头的开端盲铆钉Cu/St 或 Cu/Br 或 Cu/SSt |
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002) |
| EN ISO 16583-2002 |
带拉断铁心和埋头的开端盲铆钉Cu/St 或 Cu/Br 或 Cu/SSt |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002) |
| EN ISO 16584-2002 |
带拉断铁心和突头的开端盲铆钉NiCu/St 或 NiCu/SSt |
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002) |
| EN ISO 16585-2002 |
带拉断铁心和突头的开端盲铆钉A2/SSt |
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002) |
| EN ISO 1660-1995 |
技术制图外形尺寸公差和注法 |
Technical drawings - Dimensioning and tolerancing of profiles (ISO 1660:1987) |
| EN ISO 16654-2001 |
食品和动物饲料的微生物学检测大肠杆菌0157的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 (ISO 16654:2001) |
| EN ISO 1666-1997 |
淀粉水含量的测定烘箱干燥法 |
Starch - Determination of moisture content - Oven-drying methods (ISO 1666:1996) |
| EN ISO 16663-1-2003 |
渔网网眼大小测试方法第1部分：网眼开口 |
Fishing nets - Method of test for the determination of mesh size - Part 1: Mesh size opening (ISO 16663-1:2003) |
| EN ISO 16663-2-2003 |
渔网网眼大小测试方法第2部分：网的长度 |
Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2003) |
| EN ISO 16672-2003 |
眼科植入物眼内填塞物 |
Ophthalmic implants - Ocular endotamponades (ISO 16672:2003) |
| EN ISO 1675-1998 |
塑料液态树脂比重瓶法测定密度 |
Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985) |
| EN ISO 1680-1999 |
声学测定旋转式电机发射的空气声的试验规程 |
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinery (ISO 1680:1999) |
| EN ISO 16871-2003 |
塑料管道和导管系统 塑料管道和配件 直接(自然)风化的方法 |
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
| EN ISO 16931-2001 |
动植物脂肪和油高效尺寸筛析色谱法(HPSEC)测定聚合甘油三酯含量 |
Animal and vegetable fats and oils - Determination of polymerized triglycerides by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001) |
| EN ISO 1716-2002 |
建筑产品耐火反应试验燃烧热的测定 |
Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002) |
| EN ISO 17186-2002 |
皮革物理性能及机械性能试验表面涂层厚度测定 |
Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2002) |
| EN ISO 17189-2003 |
黄油、食用油乳剂和涂抹脂肪脂肪含量的测定(参考法) |
Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method) (ISO 17189:2003) |
| EN ISO 172-1998 |
塑料酚－醛模塑件游离氨的检验 |
Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978) |
| EN ISO 17227-2002 |
皮革物理性能及机械性能试验皮革耐干热性测定 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather (ISO 17227:2002) |
| EN ISO 17229-2002 |
皮革物理性能及机械性能试验水蒸汽吸收性测定 |
Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2002) |
| EN ISO 17233-2002 |
皮革物理性能及机械性能试验表面涂层冷裂温度的测定 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002) |
| EN ISO 17235-2002 |
皮革物理性能及机械性能试验劲度的测定 |
Leather - Physical and mechanical tests - Determination of softness (ISO 17235:2002) |
| EN ISO 17236-2002 |
皮革物理性能及机械性能试验伸长永久形变的测定 |
Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2002) |
| EN ISO 17249-2004 |
防止链锯切割的安全鞋靴 |
|
| EN ISO 17287-2003 |
道路车辆传输信息和控制系统的人类工效学布局评定整个驾驶系统呈适合性的方法 |
Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving (ISO 17287:2003) |
| EN ISO 17292-2004 |
石油、石油化学和相关工业用金属球阀 |
|
| EN ISO 17294-2-2004 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种素的测定 |
|
| EN ISO 1735-2004 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
| EN ISO 1735-2004 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
| EN ISO 1736-2000 |
乳粉和乳粉制品脂肪含量的测定重量分析法(参照法) |
Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) (ISO 1736:2000) |
| EN ISO 1737-1999 |
淡炼乳和甜炼乳脂肪含量的测定重量分析法(参照法) |
Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:1999) |
| EN ISO 1741-1994 |
葡萄糖干燥后质量损失的测定真空烘箱法 |
Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980) |
| EN ISO 1746-2000 |
橡胶或塑料软管和管件弯曲试验 |
Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
| EN ISO 17495-2003 |
水质测定选用的硝基苯酚用质谱检查的固相提取与气相色谱法 |
Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001) |
| EN ISO 175-2000 |
塑料测定液体化学品对塑料影响的试验方法 |
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999) |
| EN ISO 17510-1-2002 |
睡眠窒息呼吸治疗第1部分：睡眠窒息呼吸治疗仪 |
Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy devices (ISO 17510-1:2002) |
| EN ISO 17510-2-2003 |
睡眠窒息呼吸治疗第2部分：面罩和应用组装体 |
Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2003) |
| EN ISO 17511-2003 |
体外诊断医疗装置生物样品的定量测量已知校正器及控制材料值的计量跟踪性 |
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| EN ISO 17526-2003 |
光学及光学仪器 激光及激光设备激光器的寿命 |
Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
| EN ISO 176-1999 |
塑料增塑剂损耗的测定活性碳法 |
Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:1976) |
| EN ISO 17641-1-2004 |
金属材料焊接的有损检验.焊件的热裂试验.弧焊过程.第1部分:通则 |
|
| EN ISO 17642-1-2004 |
金属材料的焊接的有损试验.焊件的冷裂试验.弧焊过程.第1部分:通则 |
|
| EN ISO 17652-1-2003 |
焊接焊接和相关工艺车间底火的试验第1部分：一般要求 |
Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003) |
| EN ISO 17652-2-2003 |
焊接焊接和相关工艺车间底火的试验第2部分：车间底火的焊接特性 |
Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
| EN ISO 17652-3-2003 |
焊接焊接和相关工艺车间底火的试验第3部分：热切割 |
Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003) |
| EN ISO 17652-4-2003 |
焊接焊接和相关工艺车间底火的试验第4部分：焰气排放 |
Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
| EN ISO 17653-2003 |
金属焊缝的破坏性检查电阻点焊缝的扭矩 |
Destructive test on welds in metallic materials - Torsion of resistance spot welds (ISO 17653:2003) |
| EN ISO 17654-2003 |
金属焊缝的破坏性损检查电阻焊 电阻焊缝的压力试验 |
Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003) |
| EN ISO 17655-2003 |
金属焊缝的破坏性损检查测量德耳塔(δ)铁素体的取样方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003) |
| EN ISO 17664-2004 |
医疗设备的消毒.由生产商提供的可再消毒医疗设备的处理过程的信息 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com