标准号 |
中文名称 |
英文名称 |
| ISO 4009-2000 |
商用车辆.牵引车和挂车间电连接和气动连接的定位 |
(Commercial vehicles - Location of electrical and pneumatic connections between towing vehicles and trailers) |
| ISO 4010-1998 |
柴油发动机.针栓型滞后标定喷嘴 |
(Diesel engines - Calibrating nozzle, delay pintle type) |
| ISO 4012-1978 |
混凝土.试样抗压强度的测定 |
(Concrete; Determination of compressive strength of test specimens) |
| ISO 4013-1978 |
混凝土.试样抗弯强度的测定 |
(Concrete; Determination of flexural strength of test specimens) |
| ISO 4014-1999 |
六角头螺栓.产品等级A和B |
(Hexagon head bolts - Product grades A and B) |
| ISO 4015-1979 |
六角头螺栓.产品等级B.光杆部分:(光杆直径= 螺纹中径) |
(Hexagon head bolts; Product grade B; Reduced shank (Shank diameter = pitch diameter)) |
| ISO 4016-1999 |
六角头螺栓.产品等级C |
(Hexagon head bolts - Product grade C) |
| ISO 4017-1999 |
六角头螺钉.产品等级 A和B |
(Hexagon head screws - Product grades A and B) |
| ISO 4018-1999 |
六角头螺钉.产品等级C |
(Hexagon head screws - Product grade C) |
| ISO 4019-2001 |
结构钢.冷精轧中空型材.尺寸和截面特性 |
(Structural steels - Cold-formed, welded, structural hollow sections - Dimensions and sectional properties) |
| ISO 4020-2001 |
道路车辆.柴油发动机用燃油滤清器.试验方法 |
(Road vehicles - Fuel filters for diesel engines - Test methods) |
| ISO 4021-1992 |
液压传动.微粒污染分析.从工作系统管道中液体样品的提取 |
(Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system) |
| ISO 4022-1987 |
渗透性烧结金属材料.液体渗透性的测定 |
(Permeable sintered metal materials; Determination of fluid permeability) |
| ISO 4023-1991 |
输送蒸汽用橡胶软管.试验方法 |
(Rubber hoses for steam; test methods) |
| ISO 4024-1992 |
道路车辆.点火线圈.低电压电缆连接 |
(Road vehicles; ignition coils; low-tension cable connections) |
| ISO 4026-1993 |
六角凹头平端定位螺钉 |
(Hexagon socket set screws with flat point) |
| ISO 4026-2003 |
内六角平端定位螺钉 |
|
| ISO 4027-1993 |
六角凹头锥端定位螺钉 |
(Hexagon socket set screws with cone point) |
| ISO 4027-2003 |
内六角锥头定位螺钉 |
|
| ISO 4028-1993 |
六角凹头制动端定位螺钉 |
(Hexagon socket set screws with dog point) |
| ISO 4028-2003 |
内六角制动端定位螺钉 |
|
| ISO 4029-1993 |
六角凹头圆端止动螺钉 |
(Hexagon socket set screws with cup point) |
| ISO 4029-2003 |
内六角圆端定位螺钉 |
|
| ISO 4030-1983 |
道路车辆.车辆识别号码(VIN).位置和固定 |
(Road vehicles; Vehicle identification number (VIN); Location and attachment) |
| ISO 4032-1999 |
1型六角螺母.产品等级A和B |
(Hexagon nuts, style 1 - Product grades A and B) |
| ISO 4033-1999 |
2型六角螺母.产品等级A和B |
(Hexagon nuts, style 2 - Product grades A and B) |
| ISO 4034-1999 |
六角螺母.产品等级C |
(Hexagon nuts - Product grade C) |
| ISO 4035-1999 |
六角薄螺母(倒角).产品等级A和B |
(Hexagon thin nuts (chamfered) - Product grades A and B) |
| ISO 4036-1999 |
六角薄螺母(不倒角).产品等级B |
(Hexagon thin nuts (unchamfered) - Product grade B) |
| ISO 4037-1-1996 |
校准剂量计和剂量强度计及测定充作为光子函数的灵敏度用的X 和γ标准辐射.第1部分:辐射性产生法 |
(X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 1: Radiation characteristics production methods) |
| ISO 4037-2-1997 |
校准剂量计和剂量强度计及测定充作为光子函数的灵敏度用的X 和γ标准放射源.能量范围在8KeV-1,3MeV和4MeV-9 |
(X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 2: Dosimetry for radiation protection over the energy ranges 8 keV to 1,3 MeV and 4 MeV to 9 MeV) |
| ISO 4037-3-1999 |
校准剂量计和剂量强度计及测定作为光子函数的灵敏度用的X和γ参考辐射.第3部分:作为对能量函数和入射角反应 |
(X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of |
| ISO 4037-4-2004 |
校准剂量仪和剂量率仪及确定其光子能量响应的Χ和γ参考辐射.第4部分:低能X参考辐射场中场所剂量计和个人剂量计的校准 |
|
| ISO 4037-4-2004 |
校准剂量仪和剂量率仪及确定其光子能量响应的Χ和γ参考辐射.第4部分:低能X参考辐射场中场所剂量计和个人剂量计的校准 |
|
| ISO 4038-1996 |
道路车辆.液压制动系统.导管、螺纹孔、阳螺纹配件和软管管端配件 |
(Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings) |
| ISO 4039-1-1998 |
道路车辆.气胎制动系统.第1部分:有平面密封表面的管、阳螺纹管接头和螺纹孔 |
(Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface) |
| ISO 4039-2-1998 |
道路车辆.气胎制动系统.第2部分:有锥形密封表面的管、阳螺纹管接头和螺纹孔 |
(Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface) |
| ISO 404-1992 |
钢和钢制品.总交货技术条件 |
(Steel and steel products; general technical delivery requirements) |
| ISO 4040-2001 |
道路车辆.机动车的手控装置、指示器和信号装置的位置 |
(Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles) |
| ISO 4041-1978 |
旋转钻井设备.旋转式软管 |
(Rotary drilling equipment; Rotary hoses) |
| ISO 4042-1999 |
紧固件.电镀层 |
(Fasteners - Electroplated coatings) |
| ISO 4043-1998 |
同声翻译移动间.一般特点和设备 |
(Mobile booths for simultaneous interpretation - General characteristics and equipment) |
| ISO 4044-1977 |
皮革.化学试验试样品的制备 |
(Leather; Preparation of chemical test samples) |
| ISO 4045-1977 |
皮革.pH值的测定 |
(Leather; Determination of pH) |
| ISO 4046-1-2002 |
纸、纸板、纸浆及其术语.词汇.第1部分:按字母排列的索引 |
(Paper, board, pulps and related terms - Vocabulary - Part 1: Alphabetical index) |
| ISO 4046-2-2002 |
纸、纸板、纸浆及其术语.词汇.第2部分:打浆术语 |
(Paper, board, pulps and related terms - Vocabulary - Part 2: Pulping terminology) |
| ISO 4046-3-2002 |
纸、纸板、纸浆及其术语.词汇.第3部分:造纸术语 |
(Paper, board, pulps and related terms - Vocabulary - Part 3: Paper-making terminology) |
| ISO 4046-4-2002 |
纸、纸板、纸浆及其术语.词汇.第4部分:纸和纸板的等级和加工产品 |
(Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products) |
| ISO 4046-5-2002 |
纸、纸板、纸浆及其术语.词汇.第5部分:纸浆、纸和纸板的特性 |
(Paper, board, pulps and related terms - Vocabulary - Part 5: Properties of pulp, paper and board) |
| ISO 4047-1977 |
皮革.硫酸化总灰分和水不溶性硫酸化灰分的测定 |
(Leather; Determination of sulphated total ash and sulphated water-insoluble ash) |
| ISO 4048-1977 |
皮革.二氯甲烷可溶物质的测定 |
(Leather; Determination of matter soluble in dichloromethane) |
| ISO 4049-2000 |
牙科学.高聚物基填充材料、复原材料和泥封材料 |
(Dentistry - Polymer-based filling, restorative and luting materials) |
| ISO 4050-1977 |
造船.内河船舶.“莱茵“ 型和霍尔型(“RNINE“ AND HALL`S)无锚叉锚 |
(Shipbuilding; Inland vessels; “Rhine“ and Hall`s stockless anchors) |
| ISO 4051-1977 |
造船.内河船舶.舵机.扭矩值 |
(Shipbuilding; Inland vessels; Steering gear; Values of torques) |
| ISO 4052-1983 |
咖啡.咖啡碱含量的测定(参考法) |
(Coffee; Determination of caffeine content (Reference method)) |
| ISO 4053-1-1977 |
管道中气体流量测量.示踪法.第1部分:总则 |
(Measurement of gas flow in conduits; Tracer methods; Part I : General) |
| ISO 4053-4-1978 |
管道中气体流量测量.示踪法.第4部分:用放射性示踪物的移动时间法 |
(Measurement of gas flow in conduits; Tracer methods; Part IV : Transit time method using radioactive tracers) |
| ISO 4056-1978 |
聚乙烯(PE)管和配件.按公称比重和熔体液流动指数为基础的聚乙烯的表示方法 |
(Polyethylene (PE) pipes and fittings; Designation of polyethylene, based on nominal density and melt flow index) |
| ISO 4057-1986 |
信息处理.63字节/mm(1600字节/in)的位相编码式宽6.3mm(0.25in)盒式磁带的数据交换 |
(Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded) |
| ISO 4058-1977 |
镁和镁合金.镍含量的测定.丁二酮肟光度法 |
(Magnesium and its alloys; Determination of nickel; Photometric method using dimethylglyoxime) |
| ISO 4059-1978 |
聚乙烯(PE)管.管道连接的机械系统压降.试验方法和要求 |
(Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test and requirements) |
| ISO 406-1987 |
技术制图.线值和角值公差 |
(Technical drawings; Tolerancing of linear and angular dimensions) |
| ISO 4062-1977 |
口述记录设备.符号 |
(Dictation equipment; Symbols) |
| ISO 4063-1998 |
焊接及有关工艺.工艺和参考值的命名 |
(Welding and allied processes - Nomenclature of processes and reference numbers) |
| ISO 4064-1-1993 |
封闭管道中水流量的测量.冷饮用水测量计.第1部分:规范 |
(Measurement of water flow in closed conduits; meters for cold potable water; part 1: specifications) |
| ISO 4064-2-2001 |
封闭管道中水流量的测量.饮用冷水测量计.第2部分:安装要求和选择 |
(Measurement of water flow in closed conduits - Meters for cold potable water - Part 2: Installation requirements and selection) |
| ISO 4064-3-1999 |
封闭管道中水流量的测量.饮用冷水测量计.第3部分:试验方法和设备 |
(Measurement of water flow in closed conduits - Meters for cold potable water - Part 3: Test methods and equipment) |
| ISO 4065-1996 |
热塑性塑料管.通用管壁厚度表 |
(Thermoplastic pipes - Universal wall thickness table) |
| ISO 4066-1994 |
建筑制图.增强钢筋棒料表 |
(Construction drawings - Bar scheduling) |
| ISO 4067-1-1984 |
技术制图.安装.第1部分:卫生管道系统,供热、通风和导管的图形符号 |
(Technical drawings; Installations; Part 1 : Graphical symbols for plumbing, heating, ventilation and ducting) |
| ISO 4067-2-1980 |
建筑和土木工程制图.安装.第2部分:卫生设施的简化表示法 |
(Building and civil engineering drawings; Installations; Part 2 : Simplified representation of sanitary appliances) |
| ISO 4067-6-1985 |
技术制图.安装.第6部分:供水和地下排水系统的图形符号 |
(Technical drawings; Installations; Part 6 : Graphical symbols for supply water and drainage systems in the ground) |
| ISO 4069-1977 |
建筑和土木工程制图.剖面图和视图部分的表示法.一般原则 |
(Building and civil engineering drawings; Representation of areas on sections and views; General principles) |
| ISO 407 Technical Corrigendum 1-1999 |
医疗用小型气瓶.轭式阀连接器.技术勘误1 |
(Small medical gas cylinders - Pin-index yoke-type valve connections; Technical Corrigendum 1) |
| ISO 407-1991 |
医疗用小型气瓶.轭式阀连接器 |
(Small medical gas cylinders; pin-index yoke-type valve connections) |
| ISO 407-2004 |
小型医用气瓶.针导轭式阀连接 |
|
| ISO 407-2004 |
小型医用气瓶.针导轭式阀连接 |
|
| ISO 4072-1982 |
袋装生咖啡豆.取样 |
(Green coffee in bags; Sampling) |
| ISO 4073-1980 |
牙科设备.牙科治疗室设备项目.识别体系 |
(Dental equipment; Items of dental equipment at the working place; Identification system) |
| ISO 4074 Technical Corrigendum 1-2003 |
天然乳胶避孕套.要求和试验方法.技术勘误1 |
(Natural latex rubber condoms - Requirements and test methods; Technical Corrigendum 1) |
| ISO 4074 Technical Corrigendum 1-2003 |
天然乳胶避孕套.要求和试验方法.技术勘误1 |
|
| ISO 4074-12-1980 |
橡胶阴茎套.第12部分:储存 |
(Rubber condoms; Part 12 : Storage) |
| ISO 4074-2002 |
天然乳胶避孕套.要求和试验方法 |
(Natural latex rubber condoms - Requirements and test methods) |
| ISO 4079-1-2001 |
橡胶软管和软管组件.织物增强的液压型.规范:第1部分:油基液体用 |
(Rubber hoses and hose assemblies - Textile-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications) |
| ISO 4080 Technical Corrigendum 1-1997 |
橡胶和塑料软管及软管组件.气体渗透性的测定.技术勘误1 |
(Rubber and plastic hoses and hose assemblies - Determination of permeability to gas; Technical corrigendum 1) |
| ISO 4080 Technical Corrigendum 2-1998 |
橡胶和塑料软管和软管组件.透气性的测定.技术勘误2 |
(Rubber and plastics hoses and hose assemblies - Determination of permeability to gas; Technical Corrigendum 2) |
| ISO 4080-1991 |
橡胶和塑料软管及软管组件.透气性测定 |
(Rubber and plastic hoses and hose assemblies; determination of permeability to gas) |
| ISO 4081-1987 |
橡胶.用于小汽车和轻型商业车辆的冷却液软管和管道系统.规范 |
(Rubber; Coolant hoses and tubing for use on private cars and light commercial vehicles; Specification) |
| ISO 4082-1981 |
道路车辆.汽车.闪光装置 |
(Road vehicles; Motor vehicles; Flasher units) |
| ISO 4084-1977 |
飞机.可检修的接触器(非气密封接).性能要求 |
(Aircraft; Repairable contactors (not hermetically sealed); Performance requirements) |
| ISO 4085-1979 |
造船.内河航行.旋转式悬臂起重机 |
(Shipbuilding; Inland navigation; Swing derricks) |
| ISO 4086-2001 |
道路车辆.90号半挂车专用轮中枢销.互换性 |
(Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability) |
| ISO 4087-1991 |
缩微摄影技术.存档的35mm缩微胶卷的报纸缩微照相 |
(Micrographics; microfilming of newspapers for archival purposes on 35 mm microfilm) |
| ISO 4089-1979 |
造船.内河航行.货舱盖的密封橡胶 |
(Shipbuilding; Inland navigation; Sealing rubber for covers of cargo hatches) |
| ISO 4090-2001 |
摄影.医疗放射照相用X光底片盒/屏蔽物/胶片和硬拷贝成像胶片.尺寸和规范 |
(Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications) |
| ISO 4091 AMD 1-1997 |
道路车辆.牵引车和挂车间电气连接用连接器.性能要求和试验方法.修改件1 |
(Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements; Amendment 1) |
| ISO 4091-2003 |
道路车辆.牵引车和挂车之间电气连接用连接器.定义、试验和要求 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements ) |
| ISO 4091-2003 |
道路车辆.牵引车和挂车之间电气连接用连接器.定义、试验和要求 |
|
| ISO 4092 Technical Corrigendum 1-1991 |
道路车辆.摩托车用诊断系统.词汇.技术勘误1 |
(Road vehicles; diagnostic systems for motor vehicles; vocabulary; technical corrigendum 1) |
| ISO 4092-1988 |
道路车辆.汽车故障诊断系统.词汇 |
(Road vehicles; diagnostic systems for motor vehicles; vocabulary) |
| ISO 4093-1999 |
柴油发动机.喷油泵.试验用高压管 |
(Diesel engines - Fuel injection pumps - High-pressure pipes for testing) |
| ISO 4094-1991 |
纸、纸板和纸浆.试验装置的国际标定.标准化和法定实验室的验收和委任 |
(Paper, board and pulps; international calibration of testing apparatus; nomination and acceptance of standardizing and authorized laboratories) |
| ISO 4095-1998 |
航空航天.十二角传动.扳手外形.米制系列 |
(Aerospace - Bihexagonal drives - Wrenching configuration - Metric series) |
| ISO 4097-2000 |
乙丙二烯橡胶(三乙丙橡胶EPDM).评定程序 |
(Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure) |
| ISO 4100-1980 |
道路车辆.各国零件制造厂家标志符号(WPMI)代码 |
(Road vehicles; World parts manufacturer identifier (WPMI) code) |
| ISO 4101-1983 |
起重机用钢丝绳的拉制钢丝.规范 |
(Drawn steel wire for elevator ropes; Specifications) |
| ISO 4102-1984 |
作物保护设备.喷雾机.连接螺纹 |
(Equipment for crop protection; Sprayers; Connection threading) |
| ISO 4103-1979 |
混凝土.稠度分类 |
(Concrete; Classification of consistency) |
| ISO 4105-1978 |
纺织机械和附件.弹性梳理针布的金属丝 |
(Textile machinery and accessories; Wires for flexible card clothings) |
| ISO 4106-1993 |
摩托车.发动机试验规程.净功率 |
(Motorcycles; engine test code; net power) |
| ISO 4106-2004 |
摩托车.发动机试验规程.净功率 |
|
| ISO 4107-1998 |
商用车辆.轮毂附件的尺寸 |
(Commercial vehicles - Wheel hub attachment dimensions) |
| ISO 4108-1980 |
混凝土.试样抗拉裂强度的测定 |
(Concrete; Determination of tensile splitting strength of test specimens) |
| ISO 4109-1980 |
新搅拌的混凝土.稠度的测定.坍塌试验 |
(Fresh concrete; Determination of the consistency; Slump test) |
| ISO 4110-1979 |
新搅拌的混凝土.稠度的测定.威伯(Vebe)试验 |
(Fresh concrete; Determination of the consistency; Vebe test) |
| ISO 4111-1979 |
新搅拌的混凝土.稠度的测定.压实度等级(压实指数) |
(Fresh concrete; Determination of consistency; Degree of compactibility (Compaction index)) |
| ISO 4112-1990 |
谷类和豆类.粮仓粮食贮存温度的测定 |
(Cereals and pulses; guidance on measurement of the temperature of grain stored in bulk) |
| ISO 4113-1988 |
道路车辆.柴油机喷油设备的校泵油 |
(Road vehicles; calibration fluid for diesel injection equipment) |
| ISO 4115-1997 |
空中货运设备.空中/地面用托盘网 |
(Air cargo equipment - Air/land pallet nets) |
| ISO 4116-1986 |
空中货运设备.与飞机成组货件装置相配合的地面设备要求 |
(Air cargo equipment; Ground equipment requirements for compatibility with aircraft unit load devices) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com