标准号 |
中文名称 |
英文名称 |
ISO 9402-1989 |
受压力的无缝和焊(埋弧焊除外)接钢管.纵向缺陷检验用全周边磁换能器/铁涂氧磁管漏磁检验 |
(Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections) |
ISO 9403-2000 |
原油.运输责任.货物检验导则 |
(Crude petroleum - Transfer accountability - Guidelines for cargo inspection) |
ISO 9404-1-1991 |
电离辐射防护层.150mm、200mm和250mm厚壁用铅屏蔽部件.第1部分:150mm和200mm厚百叶板 |
(Enclosures for protection against ionizing radiation; lead shielding units for 150 mm, 200 mm and 250 mm thick walls; part 1: chevron units of 150 mm and 200 mm thickness) |
ISO 9405-2001 |
铺地织物.外观变化的评定 |
(Textile floor coverings - Assessment of changes in appearance) |
ISO 9406-1995 |
炼铝用的碳素材料.生焦碳.用重量分析法测定挥发物的含量 |
(Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis) |
ISO 9407-1991 |
鞋号.尺寸和标志的蒙多波因特(mondopoint)系列 |
(Shoes sizes; mondopoint system of sizing and marking) |
ISO 9408-1999 |
水质.通过在封闭的透气性测定器中需氧量的测定来评定有机化合物在水介质中的最大需氧生物降解能力 |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer) |
ISO 9409-1 Technical Corrigendum 1-1998 |
手控工业机器人.机械界面.第1部分:盘形(A式).技术勘误1 |
(Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A); Technical Corrigendum 1) |
ISO 9409-1-1996 |
操作工业机器人.机械界面.第1部分:板(A式) |
(Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A)) |
ISO 9409-1-2004 |
操作工业机器人.机械接口.第1部分:板 |
|
ISO 9409-1-2004 |
操作工业机器人.机械接口.第1部分:板 |
|
ISO 9409-2-2002 |
操作型工业机器人.机械接口.第2部分:轴 |
(Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts) |
ISO 941-1980 |
香料和调味品.冷水可溶萃取物的测定 |
(Spices and condiments; Determination of cold water-soluble extract) |
ISO 9413 AMD 1-2001 |
轮胎气门嘴.尺寸和名称与符号.修改件1:ISO 3号芯室气门嘴附录 |
(Tyre valves - Dimensions and designation - Amendment 1: Addition of valves using ISO core chamber No. 3) |
ISO 9413 AMD 2-2004 |
轮胎气门嘴.尺寸和名称与符号.修改件2 |
|
ISO 9413-1998 |
轮胎气门嘴.尺寸和规范 |
(Tyre valves - Dimensions and designation) |
ISO 9414-1989 |
木工机械.隔板涂层机械.术语 |
(Woodworking machines; curtain coating machines; nomenclature) |
ISO 9415-1989 |
木工机械.宽带砂纸打磨机械.术语 |
(Woodworking machines; wide belt sanding machines; nomenclature) |
ISO 9416-1998 |
纸张.光散射系数和吸光系数(使用库贝尔卡-蒙克理论)的测定 |
(Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)) |
ISO 9418-1998 |
航空航天.铝或铝合金固体铆钉.采购规范 |
(Aerospace - Rivets, solid, in aluminium or aluminium alloys - Procurement specification) |
ISO 9424-2003 |
木基板材.试件的尺寸测定 |
(Wood-based panels - Determination of dimensions of test pieces) |
ISO 9424-2003 |
木基板材.试件的尺寸测定 |
|
ISO 9425-1989 |
木质纤维人造板.含水率的测定 |
(Wood-based panels; determination of moisture content) |
ISO 9426-1-1989 |
木质纤维人造板.尺寸的测定.第1部分:厚度、宽度和长度的测定 |
(Wood-based panels; determination of dimensions; part 1: determination of thickness, width and length) |
ISO 9426-2003 |
木基板材.板材尺寸的测定 |
(Wood-based panels - Determination of dimensions of panels) |
ISO 9426-2003 |
木基板材.板材尺寸的测定 |
|
ISO 9427-2003 |
木基板材.密度的测定 |
(Wood-based panels - Determination of density ) |
ISO 9427-2003 |
木基板材.密度的测定 |
|
ISO 9431-1990 |
建筑制图;图纸和文本的距离和图纸上的标题栏 |
(Construction drawings; spaces for drawing and for text, and title blocks on drawing sheets) |
ISO 9437-1986 |
造船.内河船舶.马特洛索夫(Ma-trosov)锚 |
(Shipbuilding; inland vessels; matrosov anchors) |
ISO 9438-1993 |
冶金级萤石.磷总含量的测定.还原磷钼酸盐光谱法 |
(Metallurgical-grade fluorspar; determination of total phosphorus content; reduced-molybdophosphate spectrometric method) |
ISO 9439-1999 |
水质.水介质中有机化合物临界需氧生物降解性的评估.二氧化碳评估试验 |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test) |
ISO 9441-1988 |
钢.-铌含量的测定-PAR分光光度点 |
(Steel; determination of niobium content; PAR spectrophotometric method) |
ISO 9442-1988 |
钢.用于簧片热轧带肋及带槽的扁钢.公差及尺寸 |
(Steel; hot-rolled ribbed and grooved flats for spring leaves; tolerances and dimensions) |
ISO 9443-1991 |
热处理和合金钢.热轧圆棒材和线材的表面质量分类.交货技术条件 |
(Heat-treatable and alloy steels; surface quality classes for hot-rolled round bars and wire rods; technical delivery conditions) |
ISO 9444-2002 |
连续热轧不锈钢带材、板材和切割长度.尺寸和形状公差 |
(Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on dimensions and form) |
ISO 9445-2002 |
连续冷轧不锈钢窄带材、宽带材、板材和切割长度.尺寸和形状公差 |
(Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form) |
ISO 9448-1-1991 |
压制用工具.导衬.第1部分:形式 |
(Tools for pressing; guide bushes; part 1: forms) |
ISO 9448-10-1992 |
压制用工具.导衬.第10部分:E形,滑移导衬,法兰连接,2型 |
(Tools for pressing; guide bushes; part 10: form E, gliding bushes, flanges, type 2) |
ISO 9448-11-1992 |
压制用工具.导衬.第11部分:F形,滚珠隔圈导衬,法兰连接,2型 |
(Tools for pressing; guide bushes; part 11: form F, ball cage bushes, flanged, type 2) |
ISO 9448-2-1991 |
压制用工具.导衬.第2部分:A形,滑移轴衬,普通,1型 |
(Tools for pressing; guide bushes; part 2: form A, gliding bushes, plain, type 1) |
ISO 9448-3-1991 |
压制用工具.导衬.第3部分:B形,滚珠隔离圈轴衬,普通,1型 |
(Tools for pressing; guide bushes; part 3: form B, ball cage bushes, plain, type 1) |
ISO 9448-4-1991 |
压制用工具.导衬.第4部分:C形,滑移轴衬,有头,1型 |
(Tools for pressing; guide bushes; part 4: form C, gliding bushes, headed, type 1) |
ISO 9448-5-1991 |
压制用工具.导衬.第5部分:D形,滚珠隔离圈轴衬,有头,1型 |
(Tools for pressing; guide bushes; part 5: form D, ball cage bushes, headed, type 1) |
ISO 9448-6-1991 |
压制用工具.导衬.第6部分:E形,滑移轴衬,法兰连接,1型 |
(Tools for pressing; guide bushes; part 6: form E, gliding bushes, flanged, type 1) |
ISO 9448-7-1991 |
压制用工具.导衬.第7部分:F形,滚珠隔离轴衬,法兰连接,1型 |
(Tools for pressing; guide bushes; part 7: form F, ball cage bushes, flanged, type 1) |
ISO 9448-8-1991 |
压制用工具.导衬.第8部分:G形,滑移轴衬,分级,1型 |
(Tools for pressing; guide bushes; part 8: form G, gliding bushes, stepped, type 1) |
ISO 9448-9-1992 |
压制用工具.导衬.第9部分:B形,滚珠隔圈导衬,滑动连接,2型 |
(Tools for pressing; guide bushes; part 9: form B, ball cage bushes, plain, type 2) |
ISO 9449-1990 |
模铸工具.定心套筒 |
(Tools for moulding; centring sleeves) |
ISO 945-1975 |
铸铁.石墨显微结构的表示方法 |
(Cast iron; Designation of microstructure of graphite) |
ISO 9451-1989 |
木工机械.手工上料平面胶合压力机.术语 |
(Woodworking machines; hand-loading veneering presses for flat surfaces; nomenclature) |
ISO 9452-1989 |
木工机械.胶合板横切切片命名法 |
(Woodworking machines; crosswise veneer splicing machines; nomenclature) |
ISO 9453-1990 |
软钎料合金.化学成分和供货形式 |
(Soft solder alloys; chemical compositions and forms) |
ISO 9454-1-1990 |
软钎焊剂.分类和要求.第1部分:分类、加标签和包装 |
(Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging) |
ISO 9454-2-1998 |
软钎焊剂.分类和要求.第2部分:性能要求 |
(Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements) |
ISO 9455-1-1990 |
软钎焊剂.试验方法.第1部分:不挥发性物质的测定.重量分析法 |
(Soft soldering fluxes; test methods; part 1: determination of non-volatile matter, gravimetric method) |
ISO 9455-10-1998 |
软钎焊剂.试验方法.第10部分:助熔剂功效试验.焊料展开法 |
(Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method) |
ISO 9455-11-1991 |
软钎焊剂.试验方法.第11部分:钎焊剂残留物的可溶性 |
(Soft soldering fluxes; test methods; part 11: solubility of flux residues) |
ISO 9455-12-1992 |
软钎焊剂.试验方法.第12部分:钢管腐蚀试验 |
(Soft soldering fluxes; test methods; part 12: steel tube corrosion test) |
ISO 9455-13-1996 |
软钎焊剂试验方法.第13部分:焊剂飞溅量的测定 |
(Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering) |
ISO 9455-14-1991 |
软钎焊剂.试验方法.第14部分:钎焊剂残留物胶粘度测定 |
(Soft soldering fluxes; test methods; part 14: assessment of tackiness of flux residues) |
ISO 9455-15-1996 |
软钎焊剂试验方法.第15部分:铜腐蚀试验 |
(Soft soldering fluxes - Test methods - Part 15: Copper corrosion test) |
ISO 9455-16-1998 |
软钎焊助熔剂.试验方法.第16部分:助熔剂功效试验.湿平衡法 |
(Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method) |
ISO 9455-17-2002 |
软钎焊剂.试验方法.第17部分:钎焊剂残留物的表面绝缘电阻梳试验和电化学迁移试验 |
(Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues) |
ISO 9455-2-1993 |
软钎焊剂.试验方法.第2部分:不挥发物的测定.沸点计法 |
(Soft soldering fluxes; test methods; part 2: determination of non-volatile matter, ebulliometric method) |
ISO 9455-3-1992 |
软钎焊剂.试验方法.第3部分:酸值测定.电势法和目测滴定法 |
(Soft soldering fluxes; test methods; part 3: determination of acid value, potentiometric and visual titration methods) |
ISO 9455-5-1992 |
软钎焊剂.试验方法.第5部分:铜镜试验 |
(Soft soldering fluxes; test methods; part 5: copper mirror test) |
ISO 9455-6-1995 |
软钎焊剂.试验方法.第6部分:卤化物(不包括氟化物)的含量测定 |
(Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content) |
ISO 9455-8-1991 |
软钎焊剂.试验方法.第8部分:锌含量测定 |
(Soft soldering fluxes; test methods; part 8: determination of zinc content) |
ISO 9455-9-1993 |
软钎焊剂.试验方法.第9部分:氨含量测定 |
(Soft soldering fluxes; test methods; part 9: determination of ammonia content) |
ISO 9456-1991 |
光学和光学仪器.眼科光学.眼镜架标志 |
(Optics and optical instruments; ophthalmic optics; marking of spectacle frames) |
ISO 9457-1-1991 |
道路车辆.米制起动器发动机小齿轮.第1部分:通常使用的小齿轮 |
(Road vehicles; metric starter motor pinions; part 1: currently used pinions) |
ISO 9458-1988 |
客车.起动电动机的电器连接 |
(Passenger cars; Starter motor electrical connections) |
ISO 9459-1-1993 |
太阳能供暖.家庭水暖系统.第1部分:使用室内试验法的性能评定程序 |
(Solar heating; domestic water heating systems; part 1: performance rating procedure using indoor test methods) |
ISO 9459-3-1997 |
太阳能供暖.家庭水暖系统.第3部分:太阳能补充系统的性能测试 |
(Solar heating - Domestic water heating systems - Part 3: Performance test for solar plus supplementary systems) |
ISO 946-1975 |
灰口铸铁.梁的无切口冲击试验 |
(Grey cast iron; Beam unnotched impact test) |
ISO 9461-1992 |
液压传动.阀口、底板、控制装置和螺旋管的识别 |
(Hydraulic fluid power; identification of valve ports, subplates, control devices and solenoids) |
ISO 9462 Technical Corrigendum 1-1993 |
高山雪橇紧固.安全要求和试验方法 |
(Alpine ski-bindings; safety requirements and test methods; technical corrigendum 1) |
ISO 9462-1993 |
高山雪橇紧固.安全要求和试验方法 |
(Alpine ski-bindings; safety requirements and test methods) |
ISO 9463-1990 |
来自再处理工厂的硝酸料液.钚氧化后对钚的测定.分光光度法 |
(Nitric acid feed solutions from reprocessing plants; spectrophotometric determination of plutonium after oxidation to plutonium (VI)) |
ISO 9465-1991 |
高山雪橇紧固.冲击负荷条件下的测面松脱.试验方法 |
(Alpine ski-bindings; lateral release under impact loading; test method) |
ISO 9467-1993 |
林业机械.手提式链锯和灌木铲除机.排气引起的火灾危险 |
(Forestry machinery; portable chain-saws and brush cutters; exhaust system-caused fire risk) |
ISO 9469-1991 |
空中货运设备.马运输用成组货件 |
(Air cargo equipment; unit load devices for transportation of horses) |
ISO 9473-1988 |
纺织机械和附件.制作凹形弹簧片的带钢 |
(Textile machinery and accessories; strip steel for dents of reeds) |
ISO 9475-1994 |
飞行器内管和无内胎的轮胎阀.气门芯和帽的试验方法 |
(Aircraft inner tube and tubeless tyre valves - Cores and caps - Test methods) |
ISO 9477-1992 |
一般工程和结构用高强度铸钢 |
(High strength cast steels for general engineering and structural purposes) |
ISO 948-1980 |
香料和调味品.取样 |
(Spices and condiments; Sampling) |
ISO 9486-1991 |
工作场所空气.氯化烃蒸汽测定.木炭管/溶剂解吸/气相色谱法 |
(Workplace air; determination of vaporous chlorinated hydrocarbons; charcoal tube/solvent desorption/gas chromatographic method) |
ISO 9487-1991 |
工作场所空气.芳香烃蒸汽测定.木炭管/溶剂解吸/气相色谱法 |
(Workplace air; determination of vaporous aromatic hydrocarbons; charcoal tube/solvent desorption/gas chromatographic method) |
ISO 9488-1999 |
太阳能.词汇 |
(Solar energy - Vocabulary) |
ISO 9489-1991 |
热绝缘纤维加强水泥管道系统 |
(Thermally insulated fibre-cement piping systems) |
ISO 949-1987 |
菜花.冷藏和冷藏运输指南 |
(Cauliflowers; Guide to cold storage and refrigerated transport) |
ISO 9492-1987 |
结构设计基础.温度气候影响 |
(Bases for design of structures; Temperature climatic actions) |
ISO 9497-1993 |
氟石.质量偏差的实验室评定方法 |
(Flourspar; experimental methodes for evaluation of quality variation) |
ISO 9499-1995 |
萤石.抽样精密度的测定和试样制备 |
(Fluorspar - Method of determining the precision of sampling and sample preparation) |
ISO 9501-1991 |
冶金级萤石.硫总含量的测定.燃烧后的碘滴定法 |
(Metallurgical-grade fluorspar; determination of total sulfur content; iodometric method after combustion) |
ISO 9502-1993 |
冶金级萤石.硅含量的测定.还原硅钼酸盐光谱法 |
(Metallurgical-grade fluorspar; determination of silica content; reduced-molybdosilicate spectrometric method) |
ISO 9503-1991 |
冶金级萤石.可利用氟含量测定.改进的Willard-Winter法 |
(Metallurgical-grade fluorspar; determination of available fluorine content; modified Willard-Winter method) |
ISO 9504-1993 |
冶金级萤石.锑含量的测定.溶剂萃取原子吸收光谱法 |
(Metallurgical-grade fluorspar; determination of antimony content; solvent extraction atomic absorption spectrometric method) |
ISO 9505-1992 |
各类萤石.砷含量测定.二乙基氨荒酸银光谱法 |
(All grades of fluorspar; determination of arsenic content; silver diethyldithiocarbamate spectrometric method) |
ISO 9506-1-2003 |
工业自动化系统.生产信息规范.第1部分:服务定义 |
(Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition) |
ISO 9506-1-2003 |
工业自动化系统.生产信息规范.第1部分:服务定义 |
|
ISO 9506-2-2003 |
工业自动化系统.制造信息规范.第2部分:协议规范 |
(Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification) |
ISO 9506-2-2003 |
工业自动化系统.制造信息规范.第2部分:协议规范 |
|
ISO 9507-1990 |
铁矿石.总铁含量的测定.氯化钛(111)还原法 |
(Iron ores; determination of total iron content; titanium(III) chloride reduction methods) |
ISO 9509-1989 |
水质.通过化学药品和污水对活性污泥中微生物硝酸化抑制作用的鉴定方法 |
(Water quality; method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste waters) |
ISO 9512-2002 |
卷烟透气性的测定.定义和测量原理 |
(Cigarettes - Determination of ventilation - Definitions and measurement principles) |
ISO 9513 Technical Corrigendum 1-2000 |
金属材料.单轴向试验用伸长计的校正.技术勘误1 |
(Metallic materials - Calibration of extensometers used in uniaxial testing; Technical Corrigendum 1) |
ISO 9513-1999 |
金属材料.单轴向试验用引伸计的校正 |
(Metallic materials - Calibration of extensometers used in uniaxial testing) |
ISO 9514-1992 |
色漆和清漆.液态适用期测定.样品的制备和状态调节以及试验指南 |
(Paints and varnishes; determination of the pot-life of liquid systems; preparation and conditioning of samples and guidelines for testing) |
ISO 9516-1-2003 |
铁矿石.用X-射线荧光光度法测定各种素.第1部分:综合规程 |
(Iron ores - Determination of various elements by X-ray fluorescence spectrometry - Part 1: Comprehensive procedure ) |
ISO 9516-1-2003 |
铁矿石.用X-射线荧光光度法测定各种素.第1部分:综合规程 |
|
ISO 9516-1992 |
铁矿石.硅、钙、锰、铝、钛、镁、磷、硫和钾的测定.波长色散X-射线荧光光度法 |
(Iron ores; determination of silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorus, sulfur and potassium; wavelength dispersive X-ray fluorescence spectrometric method) |
ISO 9517-1989 |
铁矿石.水溶性氯化物含量的测定.离子选择电极法 |
(Iron ores; determination of water soluble chloride content; ion-selective electrode method) |
ISO 9518-1998 |
林业机械.手提式链锯.逆转试验 |
(Forestry machinery - Portable chain-saws - Kickback test) |
ISO 9519-1990 |
造船和海上建筑物.标准阶梯级 |
(Shipbuilding and marine structures; rungs for dog-step ladders) |
ISO 9523-1990 |
成年人用旅行滑雪靴.滑雪靴捆绑接合面 |
(Touring ski-boots for adults; interface with ski-bindung) |
ISO 9524-1993 |
机床.加工中心轴托架的正面 |
(Machine tools; front faces of spindle holders for machining centres; functional dimensions) |
ISO 9525-1988 |
电影技术.在17.5mm磁膜上双声录音用录音磁头间隙.位置和宽度尺寸 |
(Cinematography; recording head gaps for two sound records on 17,5 mm magnetic film; positions and width dimensions) |
ISO 9526-1990 |
水果、蔬菜及其制品.用火焰原子吸收光谱法测定铁含量 |
(Fruits, vegetables and derived products; determination of iron content by flame atomic absorption spectrometry) |