标准号 |
中文名称 |
英文名称 |
| BS ISO 4798-1997 |
实验室玻璃器皿.过滤漏斗 |
Laboratory glassware - Filter funnels |
| BS ISO 4800-1999 |
实验室玻璃器皿.分液漏斗和滴液漏斗 |
Laboratory glassware - Separating funnels and dropping funnels |
| BS ISO 4834-1998 |
电影技术.不包括成条发行拷贝的磁性声带试验胶片.基本技术特性 |
Cinematography - Magnetic sound test films excluding striped release prints - Basic technical characteristics |
| BS ISO 486-1995 |
电影技术.16mm电影胶片和穿孔的8mmR型电影胶片.裁剪和穿孔尺寸 |
Cinematography - 16 mm motion-picture film perforated 8 mm Type R. Cutting and perforating dimensions |
| BS ISO 487-1998 |
S和C型滚子链附件和链轮 |
Steel roller chains, types S and C, attachments and sprockets |
| BS ISO 4880-1997 |
织物和纺织品的燃烧性能.词汇 |
Burning behaviour of textiles and textile products - Vocabulary |
| BS ISO 490-1995 |
电影技术.在沿单边穿孔的16mm电影胶片上录音用磁带和磁头缝隙(1型).位置和宽度尺寸 |
Cinematography - Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) - Positions and width dimensions |
| BS ISO 4902-1990 |
信息技术.数据通信.37路数据终端设备/数据通信设备(DTE/DCE)接口连接器和插脚号分配 |
Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments |
| BS ISO 4903-1990 |
信息技术.数据通信.15路数据终端设备/数据通信设备(DTE/DCE)接口连接器和插脚号分配 |
Information technology - Data communication - 15-pole DTE/DCE interface connector and contact number assignments |
| BS ISO 4909-2000 |
银行卡.3列磁道的磁带数据量 |
Bank cards - Magnetic stripe data content for track 3 |
| BS ISO 491-2002 |
电影摄影.35mm电影胶片和磁片.剪切和穿孔尺寸 |
Cinematography - 35 mm motion-picture film and magnetic film - Cutting and perforating dimensions |
| BS ISO 4912-2002 |
纺织品.棉纤维.成熟度评估.显微法 |
Textiles - Cotton fibres - Evaluation of maturity - Microscopic method |
| BS ISO 492-2002 |
滚动轴承.径向轴承.公差 |
Rolling bearings - Radial bearings - Tolerances |
| BS ISO 4925-2005 |
道路车辆.液压系统用非石油基制动液规范 |
|
| BS ISO 5-3-1996 |
摄影技术.密度测量.第3部分:光谱条件 |
Photography - Density measurements - Spectral conditions |
| BS ISO 5-4-1995 |
摄影.密度测量.反射密度测量用几何学条件 |
Photography - Density measurements - Geometric conditions for reflection density |
| BS ISO 5007-2003 |
农用轮式拖拉机.驾驶员的座位.传动振动的实验室测量方法 |
(Agricultural wheeled tractors - operator’s seat - Laboratory measurement of transmitted vibration) |
| BS ISO 5008-2002 |
农业轮式拖拉机和田间作业机械.操作员全身振动试验 |
Agricultural wheeled tractors and field machinery - Measurement of whole-body vibration of the operator |
| BS ISO 5011-2001 |
内燃机和压缩机的空气进气清洁设备.性能测试 |
Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing |
| BS ISO 5024-1999 |
石油液体和液化石油气体.测量.标准参比条件 |
Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions |
| BS ISO 5025-1998 |
增强产品.机织物.宽度和长度的测定 |
Reinforcement products - Woven fabrics - Determination of width and length |
| BS ISO 5057-1998 |
工业卡车.叉式起重车叉杆的修理和检验 |
Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks |
| BS ISO 509-1996 |
托盘.主要尺寸 |
Pallet trucks - Principal dimensions |
| BS ISO 513-2004 |
有规定切割边界的金属切削加工用硬质切削材料的分类和应用.用途大组和小组的名称与符号 |
|
| BS ISO 5131-1996 |
声学.农业和林业用拖拉机和机械.操作者座位上的噪音测量.检测方法 |
Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator`s position - Survey method |
| BS ISO 516-1999 |
摄影技术.摄影机快门.定时 |
Photography - Camera shutters - Timing |
| BS ISO 5168-2005 |
流体流量的测量.不确定度评估程序 |
|
| BS ISO 5243-2004 |
纺织机械和附件.织机综框和线锭的标准号 |
|
| BS ISO 5248-2003 |
纺织机械和附件.染整机械.辅助装置词汇 |
(Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary of ancillary devices) |
| BS ISO 525-1999 |
粘合磨料制品.总要求 |
Bonded abrasive products - General requirements |
| BS ISO 5250-2003 |
纺织机械与附件.染整机械.拉幅机和热处理机械词汇 |
(Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery) |
| BS ISO 5269-1-1999 |
纸浆.试验用实验室纸板的制备.第1部分:常规纸制造法 |
Pulps. Preparation of laboratory sheets for testing. Conventional sheet-former method |
| BS ISO 5285-2004 |
传送带.储存和搬运指南 |
|
| BS ISO 5287-2003 |
皮带传动.汽车工业用窄V带.疲劳试验 |
(Belt drives - Narrow V-belts for the automotive industry - Fatigue test) |
| BS ISO 5288-2001 |
同步皮带传动.词汇 |
Synchronous belt drives - Vocabulary |
| BS ISO 5290-2001 |
皮带传动.带接头的窄V型带的槽形皮带轮.9N/J,15N/J,20N/J和25N/J槽形截面(有效体系) |
Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system) |
| BS ISO 5293-2004 |
输送带.三个导辊的最小变换距离的测定 |
|
| BS ISO 53-1998 |
通用和重型机械的圆柱齿轮.标准基本齿条轮廓 |
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| BS ISO 5344-2004 |
电动振动发生系统.性能特性 |
|
| BS ISO 5348-1998 |
机械振动和冲击.加速计的机械安装 |
Mechanical vibration and shock - Mechanical mounting of accelerometers |
| BS ISO 5350-3-1998 |
纸浆.污物和碎片的测定.第3部分:通过反射光检验 |
Pulps - Estimation of dirt and shives - Inspection by reflected light |
| BS ISO 5391-2004 |
气动工具和机械.词汇 |
|
| BS ISO 54-1997 |
通用机械和重型机械的圆柱齿轮.模数 |
(Cylindrical gears for general engineering and for heavy engineering - Modules) |
| BS ISO 5414-1-2002 |
有扁方柄刀具的螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄传动系统的尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Dimensions of the driving system of tool shanks |
| BS ISO 5414-2-2002 |
扁方柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第2部分:夹头的连接尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation |
| BS ISO 5416-1997 |
直接还原铁.金属铁含量的测定.溴-甲醇滴定法 |
Direct reduced iron - Determination of metallic iron content - Bromide-methanol titrimetric method |
| BS ISO 5418-1-1995 |
铁矿石.铜含量的测定.第1部分:2,2`-吡奎瑙拉基(Biquinolyl)分光光度法 |
Iron ores - Determination of copper content - 2,2`-Biquinolyl spectrophotometric method |
| BS ISO 5426-2-1997 |
信息和文献工作.目录信息交换用拉丁字母的扩展代码字符集.第2部分:用于欧洲小语种和旧印刷体的拉丁字母 |
Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange - Latin characters used in minor European languages and obsolete typography |
| BS ISO 5431-1999 |
皮革.湿铬鞣革山羊皮.规范 |
Leather - Wet blue goat skins - Specification |
| BS ISO 5433-1999 |
皮革.湿铬鞣革牛皮.规范 |
(Leather - Bovine wet blue - Specification) |
| BS ISO 5456-4-2001 |
技术制图.投影法.中心投影 |
(Technical drawings - Projection methods - Central projection) |
| BS ISO 5459-2000 |
技术图纸.几何公差.几何图形公差的基准和基准系统 |
(Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances) |
| BS ISO 5466-1997 |
摄影.已处理的安全摄影胶片.存放技术 |
(Photography - Processed safety photographic films - Storage practices) |
| BS ISO 5473-1997 |
橡胶或塑料涂覆织物.耐挤压性测定 |
(Rubber or plastics-coated fabrics - Determination of crush resistance) |
| BS ISO 5483-2004 |
船舶和海上技术.油箱和水箱的排水设施 |
|
| BS ISO 5507-2002 |
油料种子、植物油和脂肪.命名 |
(Oilseeds, vegetable oils and fats - Nomenclature) |
| BS ISO 5530-4-2002 |
小麦面粉.生面团物理特性.使用气泡仪测定流变性能 |
(Wheat flour (Triticum aestivum L.) - Physical characteristics of doughs - Determination of rheological properties using an alveograph) |
| BS ISO 5536-2003 |
乳脂品.水含量的测定.卡尔.费休法 |
Milk fat products - Determination of water content - Karl Fischer method |
| BS ISO 5538-2004 |
乳和乳制品.取样.计数检验 |
|
| BS ISO 5548-2004 |
酪蛋白和酪蛋白酸盐.乳糖含量的测定.光度法 |
|
| BS ISO 5593-1998 |
滚动轴承.词汇 |
(Rolling bearings - Vocabulary) |
| BS ISO 5596-2000 |
液压传动.隔离式储气蓄能器.压力、容积的范围和特性量 |
(Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities) |
| BS ISO 5599-1-2001 |
气压液动.五通方向控制阀.不带电连接器的安装接口表面 |
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) |
| BS ISO 5599-2-2001 |
气压液动.五通方向控制阀.任选电气连接器的安装接口面 |
Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector |
| BS ISO 5626-1994 |
纸.耐折弯性测定 |
Paper - Determination of folding endurance |
| BS ISO 5631-2001 |
纸和板.颜色的测定(C/2°).漫反射法 |
Paper and board - Determination of colour (C/2 ? - Diffuse reflectance method |
| BS ISO 5636-4-2005 |
纸和纸板.透气性的测定(中等范围).谢菲尔德方法 |
|
| BS ISO 5652-1990 |
信息技术.信息交换用9磁道、12.7mm(0.5in)宽磁带.使用246字符/mm(6250字符/in)编码字符集的格式和录制 |
Information processing - 9-track, 12,7 mm (0.5 in) wide magnetic tape for information interchange - Format and recording, using group coding at 246 cpmm (6250 cpi) |
| BS ISO 5655-2001 |
摄影技术.工业X射线照相胶片和金属增感屏.尺寸 |
Photography - Industrial radiographic films (roll and sheet) and metal intensifying screens - Dimensions |
| BS ISO 5658-2-1997 |
燃烧试验.火焰传播.第2部分:直立布局中建筑产品侧面的火焰蔓延程度 |
Reaction to fire tests - Spread of flame - Lateral spread on building products in vertical configuration |
| BS ISO 5658-4-2001 |
燃烧试验反应.火焰传播.垂直定向样品火焰垂直传播的中型试验 |
(Reaction to fire tests - Spread of flame - Intermediate-scale test of vertical spread of flame with vertically oriented specimen) |
| BS ISO 5667-17-2000 |
水质.取样.悬浮沉淀物的取样指南 |
Water quality - Sampling - Guidance on sampling of suspended sediments |
| BS ISO 5667-18-2001 |
水质.取样.污染地区地下水取样指南 |
Water quality - Sampling - Guidance on sampling of groundwater at contaminated sites |
| BS ISO 5681-2002 |
农作物保护设备.词汇 |
Equipment for crop protection - Vocabulary |
| BS ISO 5687-2003 |
收割设备.联合收割机.谷物箱容量和卸料装置性能的测定和标注 |
Equipment for harvesting - Combine harvesters - Determination and designation of grain tank capacity and unloading device performance |
| BS ISO 5692-1-2004 |
农用车辆.拖挂车辆的机械连接装置.挂接环的尺寸 |
|
| BS ISO 5707-1997 |
挤奶装置.结构和性能 |
Milking machine installations - Construction and performance |
| BS ISO 5718-2002 |
收割机.农用旋转式割草机刀片.要求 |
Harvesting equipment - Blades for agricultural rotary mowers - Requirements |
| BS ISO 5725-1-1995 |
测量方法和结果的精确性(精度和精确度).一般原则和定义 |
Accuracy (trueness and precision) of measurement methods and results - General principles and definitions |
| BS ISO 5725-2-1995 |
测量方法和结果的精确性(精度和精密度).标准测量方法的重复性和再现性测定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| BS ISO 5725-3-1995 |
测量方法和测量结果的精确性(精度和精密度).第3部分;标准测量方法的精密度的间歇性测量 |
Accuracy (trueness and precision) of measurement methods and results - Intermediate measures of the precision of a standard measurement method |
| BS ISO 5725-4-1995 |
测量方法和测量结果的精确性(精度和精密度).第4部分;标准测量方法的真实测定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method |
| BS ISO 5725-5-1998 |
测量方法和结果的准确度.标准测量方法精度测定的迭代法 |
Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method |
| BS ISO 5725-6-1995 |
测量方法和测量结果的精确性(精度和精密度).第6部分;准确值的实际应用 |
Accuracy (trueness and precision) of measurement methods and results - Use in practice of accuracy values |
| BS ISO 5738-2004 |
乳和乳制品.铜含量的测定.光度参照法 |
|
| BS ISO 5739-2003 |
酪蛋白和酪蛋白酸盐.焦粒和外部物质含量的测定 |
Caseins and caseinates - Determination of contents of scorched particles and of extraneous matter |
| BS ISO 5742-2004 |
夹扭钳和剪切钳.术语 |
|
| BS ISO 5743-2004 |
夹扭钳和剪切钳.通用技术条件 |
|
| BS ISO 5744-2004 |
夹扭钳和剪切钳.试验方法 |
|
| BS ISO 5745-2004 |
夹扭钳和剪切钳.夹扭钳.尺寸和试验值 |
|
| BS ISO 5746-2004 |
夹扭钳和剪切钳.钳工钳和电工钳.尺寸和试验值 |
|
| BS ISO 5748-2004 |
夹扭钳和剪切钳.顶切钳.尺寸和试验值 |
|
| BS ISO 5749-2004 |
夹扭钳和剪切钳.斜嘴钳.尺寸和试验值 |
|
| BS ISO 5751-1-2004 |
摩托车轮胎和轮辋(米制系列).设计指南 |
|
| BS ISO 5751-1-2004 |
摩托车轮胎和轮辋(米制系列).设计指南 |
|
| BS ISO 5751-3-2004 |
摩托车轮胎和轮辋(米制系列).配套轮辋轮廓范围 |
|
| BS ISO 5751-3-2004 |
摩托车轮胎和轮辋(米制系列).配套轮辋轮廓范围 |
|
| BS ISO 5758-2003 |
电影.供交换用影片及磁性(声迹)素材.容器标签的最低限内容 |
(Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials) |
| BS ISO 5765-1-2002 |
奶粉、干冰混合物和加工的奶酪.测定乳糖含量.利用乳糖中葡萄糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the glucose moiety of the lactose |
| BS ISO 5765-2-2002 |
奶粉、干冰混合物和加工的奶酪.测定乳糖含量.利用乳糖中半乳糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the galactose moiety of the lactose |
| BS ISO 5768-1999 |
电影技术.16mm电影胶片在W 型电影摄影机片窗上形成的影象.位置和尺寸 |
Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions |
| BS ISO 5781-2000 |
液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.安装面 |
Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces |
| BS ISO 5782-1-1998 |
气压传动.空气压缩过滤器.供货商文件应包括的主要特性和产品标志要求 |
Pnuematic fluid power - Compressed air filters - Main characteristics to be included in supplier`s literature and product-marking requirements |
| BS ISO 5782-2-1998 |
气压传动.空气压缩过滤器.测定包括在供货商文件中的主要特性的试验方法 |
Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier`s literature |
| BS ISO 5796-2000 |
橡胶配方配合剂.天然碳酸钙.试验方法 |
Rubber compounding ingredients - Natural calcium carbonate - Test methods |
| BS ISO 5797-2004 |
造船和海上技术.耐火结构的窗和侧舷窗 |
|
| BS ISO 5797-2004 |
造船和海上技术.耐火结构的窗和侧舷窗 |
|
| BS ISO 5799-1995 |
摄影技术.医用和牙科用直接爆光射线摄影胶片/处理系统.ISO感光速度和ISO平均梯度的测定 |
Photography - Direct-exposing medical and dental radiographic film/process systems - Determination of ISO speed and ISO average gradient |
| BS ISO 5800-1995 |
摄影技术.静物照相用彩色负片.ISO感光度的测定 |
Photography - Colour negative films for still photography - Determination of ISO speed |
| BS ISO 5805-1998 |
机械振动和冲击.人体暴露.词汇 |
Mechanical vibration and shock - Human exposure - Vocabulary |
| BS ISO 582-1995 |
滚动轴承.倒角尺寸.最大值 |
Rolling bearings - Chamfer dimensions - Maximum values |
| BS ISO 5832-2-1999 |
外科植入物.金属材料.非合金钛 |
Implants for surgery - Metallic materials - Unalloyed titanium |
| BS ISO 5833-2002 |
外科植入物.丙烯酸树脂粘接剂 |
Implants for surgery - Acrylic resin cements |
| BS ISO 5834-1-1998 |
外科植入物.超高分子量聚乙烯.粉剂型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Powder form |
| BS ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Moulded forms |
| BS ISO 5834-4-2005 |
外科植入物.超高分子量聚乙烯.氧化指数测量法 |
|
| BS ISO 5841-2-2001 |
外科植入物.心脏起搏器.对使用脉搏发生器的人群的临床实践报告 |
Implants for surgery - Cardiac pacemakers - Reporting of clinical performance of populations of pulse generators or leads |
| BS ISO 5893-2002 |
橡胶和塑料的试验设备.拉伸、弯曲和压缩型.规范 |
Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification |
| BS ISO 5894-2000 |
船和造船技术.有螺栓紧固盖的人孔 |
Ships and marine technology - Manholes with bolted covers |
| BS ISO 5912-2004 |
野营帐篷 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com