标准号 |
中文名称 |
英文名称 |
| BS 6902-1-1990 |
心脏起搏器.第1部分:可植入心脏起搏器规范 |
(Cardiac pacemakers - Specification for implantable cardiac pacemakers) |
| BS 6904-1987 |
额定电压不低于72.5kV的气体绝缘金属密封式开关装置用电缆连接指南 |
(Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above) |
| BS 6905-1987 |
用改进的凯尔西-赛克斯试验对医用消毒剂浓度的估算方法 |
(Method for estimation of concentration of disinfectants used in ’dirty’ conditions in hospitals by the modified Kelsey-Sykes test) |
| BS 6906-2-1989 |
土工织物试验方法.第2部分:干筛分表观筛孔尺寸的测定 |
(Methods of test for geotextiles - Determination of the apparent pore size distribution by dry sieving) |
| BS 6906-3-1989 |
土工织物试验方法.第3部分:恒定水压下垂直于土工织物平面的水流量的测定 |
(Methods of test for geotextiles - Determination of water flow normal to the plane of the geotextile under a constant head) |
| BS 6906-5-1991 |
土工织物的试验方法.第5部分:蠕变的测定 |
(Methods of test for geotextiles - Determination of creep) |
| BS 6906-7-1990 |
土工织物的试验方法.第7部分:平面水流量的测定 |
(Methods of test for geotextiles - Determination of in-plane waterflow) |
| BS 6906-8-1991 |
土工织物的试验方法.第8部分:用直接剪切法测定沙子用土工织物的摩擦特性 |
(Methods of test for geotextiles - Determination of sand-geotextile frictional behaviour by direct shear) |
| BS 6907-1-1988 |
露天矿和采石矿的电气装置.第1部分:术语词汇 |
(Electrical installations for open-cast mines and quarries - Glossary) |
| BS 6907-2-1988 |
露天矿和采石矿的电气装置.第2部分:触电防护一般推荐规范 |
(Electrical installations for open-cast mines and quarries - General recommendations for protection against direct contact and electric shock) |
| BS 6907-3-1988 |
露天矿和采石矿的电气装置.第3部分:设备及辅助设备推荐规范 |
(Electrical installations for open-cast mines and quarries - Recommendations for equipment and ancillaries) |
| BS 6907-4-1988 |
露天矿和采石矿的电气装置.第4部分:开采、叠片和处理机械设备、泵和低信号级及通信系统 |
(Electrical installations for open-cast mines and quarries - Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems) |
| BS 6907-5-1988 |
露天矿和采石矿的电气装置.第5部分:操作推荐规范 |
(Electrical installations for open-cast mines and quarries - Recommendations for operation) |
| BS 6909-1988 |
空气中悬浮的干燥状态纤维质点脱落趋势划阶段与计算方法 |
(Method for generation and counting of the airborne linting propensity of fabrics in the dry state) |
| BS 6910-1-1988 |
电压小于和等于交流1000V 和直流1500V 的,冷浇注树脂复合物和热装电缆接头.第1部分:材料规格 |
(Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials) |
| BS 6910-2-1989 |
电压范围在1000Va.c.和1500Vd.c.内的低温浇注树脂复合物和热套装电缆接头.第2部分:定位安装操作规程 |
(Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation) |
| BS 6911-1-1988 |
土方机械试验.第1部分:履带式拖拉机和轮式拖拉机推土刮板的容积额定值的测定方法 |
(Testing earth-moving machinery - Method for determination of volumetric rating of crawler and wheel tractor dozer blades) |
| BS 6911-10-1996 |
土方机械的检验.第10部分:机械悬挂补偿设备性能要求 |
(Testing earth-moving machinery - Machine-mounted retrieval device - Performance requirements) |
| BS 6911-11-1997 |
土方机械.液压挖掘机铲斗和反向铲装载铲斗的额定容量测定方法 |
(Testing earth-moving machinery - Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets) |
| BS 6911-12-1998 |
土方机械试验.轮式机械转弯尺寸的测定 |
(Testing earth-moving machinery - Determination of turning dimensions of wheeled machines) |
| BS 6911-13-1998 |
土方机械.整机及其设备和组件质量的测量方法 |
(Testing earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components) |
| BS 6911-14-1998 |
土方机械试验.履带式机械.制动系统的性能要求和试验程序 |
(Testing earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems) |
| BS 6911-2-1990 |
土方机械试验.第2部分:装载机机具强度和倾覆载荷测量 |
(Testing earth-moving machinery - Measurement of tool forces and tipping loads of loaders) |
| BS 6911-3-1990 |
土方机械试验.第3部分:液压挖掘机机具力的测量 |
(Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators) |
| BS 6911-4-1998 |
土方机械试验.引擎试验条款.净功率 |
(Testing earth-moving machinery - Engine test code - Net power) |
| BS 6911-5-1992 |
土方机械试验.第5部分:操作者视野的测定 |
(Testing earth-moving machinery - Determination of operator’s field of view) |
| BS 6911-6-1992 |
土方机械试验.第6部分:带侧起重臂的管道敷设机和轮式拖拉机或装载机的提升能力评定方法 |
(Testing earth-moving machinery - Method for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom) |
| BS 6911-7-1992 |
土方机械试验.第7部分:测量单位和公差规范 |
(Testing earth-moving machinery - Testing of earth-moving machinery - Specification for units of measurement and tolerances) |
| BS 6911-8-1993 |
土方机械试验.第8部分:机械液压系统操作倾斜度极限值的测定(静态试验法) |
(Testing earth-moving machinery - Determination of slope limits for machine fluid systems operation (static test method)) |
| BS 6911-9-1993 |
土方机械试验.第9部分:翻斗车和拖拉式平地机的减速器性能校验 |
(Testing earth-moving machinery - Verification of retarder capability of dumpers and tractor-scrapers) |
| BS 6912-1-1997 |
土方机械的安全.液压挖掘机和反铲装载机悬臂降低控制装置 |
(Safety of earth-moving machinery - Specification for hydraulic excavator and backhoe loader boom lowering control device) |
| BS 6912-11-1993 |
土方机械安全.第11部分:提升臂支撑装置的要求 |
(Safety of earth-moving machinery - Requirements for lift arm support devices) |
| BS 6912-12-1993 |
运土机械的安全.第12部分:驾驶员视野的评定 |
(Safety of earth-moving machinery - Evaluation of operator’s field of view) |
| BS 6912-13-1993 |
运土机械的安全.第13部分:驾驶员视野合格准则 |
(Safety of earth-moving machinery - Acceptance criteria for operator’s field of view) |
| BS 6912-16-1995 |
地面移动机械.翻斗车身支架和操作舱翻转支架装置 |
(Safety of earth-moving machinery - Specification for dumper body support and operator’s cab tilt support devices) |
| BS 6912-18-1995 |
土方机械.操作者.操作者的人体尺寸和操作者最小座舱空间.边粗率 |
(Safety of earth-moving machinery - Specification for bluntness of edges at the operator station and in maintenance areas) |
| BS 6912-19-1996 |
土方机械安全.驾驶员座椅的尺寸和要求用规范 |
(Safety of earth-moving machinery - Specification for dimensions and requirements for operator’s seat) |
| BS 6912-1996 |
土方机械.驾驶员座椅的尺寸和要求 |
(Safety of earth-moving machinery. Specification for dimensions and requirements for operator’s seat) |
| BS 6912-2-1989 |
土方机械的安全.第2部分:履带式和轮式装载机运转负荷规范 |
(Safety of earth-moving machinery - Specification for rated operating load for crawler and wheel loaders) |
| BS 6912-20-1996 |
土方机械.操作者控制装置 |
(Safety of earth-moving machinery - Specification for operator’s controls) |
| BS 6912-21-1996 |
土方机械.照明、发信号灯和标志灯,后向反射镜 |
(Safety of earth-moving machinery - Specification for lighting, signalling and marking lights, and reflex-reflector devices) |
| BS 6912-22.1-1996 |
土方机械安全.第22部分:操作者的密封环境.第1节:总则和定义 |
(Safety of earth-moving machinery - Operator enclosure environment - General and definitions) |
| BS 6912-22.2-1996 |
土方机械安全.第22部分:操作者的密封环境.第2节:空气过滤器的检验 |
(Safety of earth-moving machinery - Operator enclosure environment - Air filter test) |
| BS 6912-22.3-1996 |
土方机械安全.第22部分:操作者的密封环境.第3节:操作者用密封驾驶室加压试验法 |
(Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure pressurization test method) |
| BS 6912-22.4-1996 |
土方机械安全.第22部分:操作者的密封环境.第4节:操作者用密封驾驶室的通风、加热和/或空调试验法 |
(Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure ventilation, heating and/or air-conditioning test method) |
| BS 6912-22.5-1996 |
土方机械安全.第22部分:操作者的密封环境.第5节:挡风玻璃解冻系统试验法 |
(Safety of earth-moving machinery - Operator enclosure environment - Windscreen defrosting system test method) |
| BS 6912-22.6-1996 |
土方机械安全.第22部分:操作者的密封环境.第6节:操作者用密封驾驶室太阳能加热效果的测定 |
(Safety of earth-moving machinery - Operator enclosure environment - Determination of the effect of solar heating on the operator enclosure) |
| BS 6912-23-1996 |
土方机械的安全.第23部分:安全信号和危险图形符号的一般性能 |
(Safety of earth-moving machinery - Safety signs and hazard pictorials - General principles) |
| BS 6912-3-1990 |
土方机械的安全.第3部分:安装在机器上的正、反向报警器的声学试验方法 |
(Safety of earth-moving machinery - Sound test method for machine-mounted forward and reverse warning alarm) |
| BS 6912-4-1991 |
土方机械的安全.第4部分:钥匙锁定起动系统规范 |
(Safety of earth-moving machinery - Specification for key-locked starting systems) |
| BS 6912-5-1992 |
土方机械安全.第5部分:最小进入口尺寸推荐 |
(Safety of earth-moving machinery. Recommendations for minimum access dimensions) |
| BS 6912-8-1992 |
土方机械安全.第8部分:铰接式车架锁紧装置的性能要求规范 |
(Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device) |
| BS 6912-9-1992 |
土方机械的安全.第9部分:液压挖掘机的提升能力检验和计算方法 |
(Safety of earth-moving machinery - Methods for the calculation and verification of the lift capacity of hydraulic excavators) |
| BS 6913-1-1989 |
土方机械的操作和维修.第1部分:一般维修和调整工具指南 |
(Operation and maintenance of earth-moving machinery - Guide to common maintenance and adjustment service tools) |
| BS 6913-10-1994 |
土方机械的操作和维护.第10部分:排液,注液口和液面口螺塞规范 |
(Operation and maintenance of earth-moving machinery - Specification for drain, fizz and level plugs) |
| BS 6913-11-1994 |
土方机械的操作和维护.第11部分:辅助起动示意信号电联结器规范 |
(Operation and maintenance of earth-moving machinery - Specification for auxiliary starting aid electrical connector) |
| BS 6913-12-1995 |
土方机械的操作和保养.产品识别数字系统的规范 |
(Operation and maintenance of earth-moving machinery - Specification for a product identification numbering system) |
| BS 6913-13-1997 |
土方机械的操作和维修.注油配件规范.管咀类型 |
(Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Nipple type) |
| BS 6913-14-1997 |
土方机械的操作和维修.注油配件规范.喷油咀 |
(Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Grease-gun nozzles) |
| BS 6913-15-1997 |
土方机械的操作和维修.维修工具规范.机械拔具和推进器 |
(Operation and maintenance of earth-moving machinery - Specification for service tools - Mechanical pullers and pushers) |
| BS 6913-3-1998 |
土方机械的操作和维修.拖拉机式推土机、平地机和铲运机用刃口的规范.主要形状和基本尺寸 |
(Operation and maintenance of earth-moving machinery - Specification for cutting edges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions) |
| BS 6913-4-1997 |
土方机械的操作和维修.仪器装置维修推荐规范 |
(Operation and maintenance of earth-moving machinery - Recommendations for service instrumentation) |
| BS 6913-5-1990 |
土方机械的操作和维修.第5部分:诊断口规范 |
(Operation and maintenance of earth-moving machinery - Specification for diagnostic ports) |
| BS 6913-6-1991 |
土方机械的操作和维修.第6部分:电线和电缆的识别和标志规范 |
(Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables) |
| BS 6913-7-1991 |
土方机械的操作和维修.第7部分:机械利用率术语汇编 |
(Operation and maintenance of earth-moving machinery - Glossary for machine availability) |
| BS 6913-8-1992 |
土方机械的操作和检修.第8部分:操作控制钮和其它显示开关的通用符号规范 |
(Operation and maintenance of earth-moving machinery - Specification for common symbols for operator controls and other displays) |
| BS 6913-9-1994 |
土方机械的操作和维护.第9部分:机器.设备和附件的专用符号规范 |
(Operation and maintenance of earth-moving machinery - Specification for specific symbols for machines, equipment and accessories) |
| BS 6914-1-1997 |
土方机械用术语词汇(包括尺寸和符号的定义).基本类型 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Basic types) |
| BS 6914-10-1998 |
土方机械术语(包括尺寸和符号的定义).装载机商业规范和术语 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for loaders) |
| BS 6914-4-1990 |
土方机械用术语词汇(包括尺寸和符号的定义).第4部分:翻斗车术语词汇 |
Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Glossary for dumpers |
| BS 6914-5-1999 |
土方机械术语(包括尺寸和符号的定义).铺管机术语汇编 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Glossary for pipelayers) |
| BS 6914-6-1999 |
土方机械术语(包括尺寸和符号定义).自推式铲土机和轮式拖拉机和设备的商业规范和术语 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment) |
| BS 6914-7-1992 |
土方机械的术语(包括尺寸和图形符号的定义).第7部分:机械性能的词汇.图形符号和单位 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Vocabulary, symbols and units for machine performance) |
| BS 6914-8-1993 |
土方机械的术语(包括尺寸和图形符号的定义).第8部分:水力冲泥机的术语和工业规范 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for hydraulic excavators) |
| BS 6914-9-1996 |
土方机械的术语(包括尺寸和图形符号的定义).第9部分:拖拉机式铲运机术语和商用规范 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for tractor-scrapers) |
| BS 6915-2001 |
全面支撑的铅板屋顶和墙面涂料的设计与结构规范 |
(Design and construction of fully supported lead sheet roof and wall coverings - Code of practice) |
| BS 6916-10-1988 |
链锯.第10部分:纵向平衡规范 |
(Chain saws - Specification for longitudinal balance) |
| BS 6916-2-1996 |
链锯.第2部分:技术数据 |
(Chain saws - Technical data) |
| BS 6916-3-1988 |
链锯.第3部分:手前部防护装置的尺寸规范 |
(Chain saws - Specification for dimensions of front hand guards) |
| BS 6916-4-1988 |
链锯.第4部分:手前部防护装置的强度规范 |
Chain saws - Specification for strength of front hand guards |
| BS 6916-5-1988 |
链锯.第5部分:链条制动性能的估算方法 |
(Chain saws - Methods of evaluating chain brake performance) |
| BS 6916-6-1988 |
链锯.第6部分:在操作员位置上空气传播噪声的测量方法 |
(Chain saws - Method of measurement of airborne noise at the operator’s position) |
| BS 6916-7-1998 |
链锯.包括燃料消费的评估引擎性能的方法 |
Chain saws - Method of evaluating engine performance including fuel consumption |
| BS 6916-8-1988 |
链锯.第8部分:手传递振动的测量方法 |
Chain saws - Method of measurement of hand-transmitted vibration |
| BS 6916-9-1988 |
链锯.第9部分:手柄的强度规范 |
Chain saws - Specification for strength of handles |
| BS 692-1990 |
气象用温度计规范 |
Specification for meteorological thermometers |
| BS 6920-1-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.规范 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Specification |
| BS 6920-2.1-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.取样和试验 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Samples for testing |
| BS 6920-2.2.1-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.水的气味和味道.试验的一般方法 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - General method of test |
| BS 6920-2.2.2-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.水的气味和味道.用软管,合成管及管道分水的试验水的气味和味道的方法 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing odours and flavours imparted to water |
| BS 6920-2.2.3-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.水的气味和味道.为食品和饮用水准备的使 |
() |
| BS 6920-2.3-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.水的外观 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Appearance of water |
| BS 6920-2.4-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.水生微生物的生长 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Growth of aquatic microorganisms test |
| BS 6920-2.5-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.对公众健康有影响的物质的萃取 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - The extraction of substances that may be of concern to public health |
| BS 6920-2.6-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.金属的提取 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - The extraction of metals |
| BS 6920-3-2000 |
通过非金属产品对水质的影响看其对接触人类用水的适用性.高温试验 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temperature tests |
| BS 6920-4-2001 |
与人类消费用水接触的非金属产品对水质影响的适用性.水可滤析有机物的GCMS识别方法 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Method for the GCMS identification of water leachable organic substances |
| BS 6921-1988 |
使用缠管法对软片电气绝缘材料的耐热性的评定方法 |
Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method |
| BS 6923-1988 |
小色差的计算方法 |
(Method for calculation of small colour differences) |
| BS 6925-1988 |
建筑物和土木工程用沥青砂胶(石灰石集料)规范 |
(Specification for mastic asphalt for building and civil engineering (limestone aggregate)) |
| BS 6931-1988 |
铜和铜合金的术语词汇 |
(Glossary of terms for copper and copper alloys) |
| BS 6935-5-1988 |
轮椅试验.第5部分:轮椅的总尺寸、重量和转动空间的测定方法 |
(Wheelchair tests - Methods for determination of overall dimensions, mass and turning space) |
| BS 6937-1988 |
轮椅术语词汇 |
(Glossary of wheelchair terms) |
| BS 6938-1988 |
关于准备有色金属冶金分析用检定参考材料的文献的推荐规范 |
(Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals) |
| BS 6940-1-1990 |
全存取通信系统(TACS).第1部分:移动电台性能要求规范 |
(Total Access Communication System (T.A.C.S) - Specification for performance requirements for mobile stations) |
| BS 6940-2-1990 |
全通路通信系统(TACS).第2部分:移动电台信号系统性能和试验规范 |
(Total Access Communication System (T.A.C.S) - Specification for performance and tests of the signalling system of mobile stations) |
| BS 6942-2-1989 |
氧气燃气焊接和类似工艺用的成套小型工具的设计和构造.第2部分:使用可充 氧气和燃气的容器的成套小型工具规 |
(Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas) |
| BS 6943-1988 |
印制电路板布局用电子件形状分类 |
(Classification of shapes of electronic components for placement on printed wiring boards) |
| BS 6944-1988 |
黑色金属(不包括压力管应用的)中火花对接焊规范 |
(Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)) |
| BS 6946-1988 |
电气设备用金属管道电缆支撑系统规范 |
(Specification for metal channel cable support systems for electrical installations) |
| BS 6947-1988 |
酸性油和回收脂肪酸馏出物规范 |
(Specification for acid oils and recovered fatty acid distillates) |
| BS 6949-1991 |
冷用(与饮用水接触的除外)沥青基涂层的规范 |
(Specification for bitumen-based coatings for cold application excluding use in contact with potable water) |
| BS 6953-1988 |
建筑结构中定位划线和测量用方法的术语词汇 |
(Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)) |
| BS 6954-1-1988 |
建筑用公差.第1部分:评定基本原则和规格的推荐规范 |
(Tolerances for building - Recommendations for basic principles for evaluation and specification) |
| BS 6954-2-1988 |
建筑用公差.第2部分:具有正规分布尺寸的构件之间预配合的统计基础推荐规范 |
(Tolerances for building - Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes) |
| BS 6954-3-1988 |
建筑用公差.第3部分:选择对象尺寸和预配合推荐规范 |
(Tolerances for building - Recommendations for selecting target size and predicting fit) |
| BS 6955-1-1994 |
振动和冲击传感器的校正.主振动的激光干涉校正法 |
(Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry) |
| BS 6955-10-1994 |
振动和冲击传感器的校正.强烈冲击振动引起振动和冲击初级校正法 |
(Calibration of vibration and shock pick-ups - Method for primary calibration by high impact shocks) |
| BS 6955-11-1994 |
振动和冲击传感器的校正.横向振动灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for transverse vibration sensitivity) |
| BS 6955-12-1994 |
振动和冲击传感器的校正.横向冲击灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for transverse shock sensitivity) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com