标准号 |
中文名称 |
英文名称 |
BS 5117-0-1992 |
发动机浓缩冷却剂.(抗冻剂)的防腐蚀试验.第0部分:概述 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - General introduction |
BS 5117-1.1-1985 |
发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第1部分:测定物理和化学特性的试验方法.第1.1节:辅助方法 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Ancillary procedures |
BS 5117-1.2-1985 |
发动机浓缩冷却剂(“抗冻剂“)的腐蚀抑制试验.第1部分:测定物理和化学特性的试验方法.第1.2节:沸点测定 |
(Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for determination of physical and chemical properties - Determination of boiling point) |
BS 5117-1.3-1985 |
发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第1部分:测定物理和化学特性的试验方法.第1.3节:冻结点测定 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Determination of freezing point |
BS 5117-1.4-1985 |
发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第1部分:测定物理和化学特性的试验方法.第1.4节:发泡特性测定 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Determination of foaming characteristics |
BS 5117-1.5-1992 |
防腐蚀试验.发动机浓缩冷却剂(防冻剂).第1部分:测定物理和化学特性的试验方法.第5节:冷却硬水稳定性试验 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Coolant hard water stability test |
BS 5117-2.1-1985 |
发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第2部分:腐蚀抑制性能试验方法.第2.1节:一般方法 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - General procedures |
BS 5117-2.2-1985 |
发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第2部分:腐蚀抑制性能试验方法.第2.2节:玻璃器皿试验 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - Glassware tests |
BS 5117-2.4-1985 |
发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第2部分:腐蚀抑制性能试验方法.第2.4节:静态发动机试验 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - Static engine test |
BS 5117-2.5-1985 |
发动机浓缩冷却剂(“抗冻剂“)的腐蚀抑制试验.第2部分:腐蚀抑制性能试验方法.第2.5节:现场试验 |
(Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for corrosion inhibition performance - Field test) |
BS 5117-2.6-1992 |
防腐蚀试验.发动机浓缩冷却剂(防冻剂).第2部分:防腐蚀性能试验方法.第6节:热交换条件下铸铝合金的防腐蚀试验 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - Test for corrosion of cast aluminium alloys under heat-transfer conditions |
BS 5122-1986 |
低压和中压饱和蒸汽用橡胶软管规范 |
Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
BS 5125-1990 |
煤矿用50A650V阻燃、保险和螺栓连接的插头和插座规范 |
(Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines) |
BS 5126-1-1993 |
1100V以下系统用矿山型阻燃式电源和控制装置.第1部分:直接起动器规范 迷谌嘟涣鞯缏飞 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for direct-on-line motor starters) |
BS 5126-2-1993 |
1100V以下系统用矿山型阻燃式电源和控制装置.第2部分:断路器装置规范 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for circuit breaker units) |
BS 5126-3-1993 |
1100V 以下系统用矿山型阻燃式电源和控制装置.第3部分:照明用空冷变压器装置规范 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled lighting transformer units) |
BS 5126-4-1993 |
1100V以下系统用矿山型阻燃式电源和控制装置.第4部分:钻机供电装置的空冷变压器规范 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled transformers to power drilling machines) |
BS 5127-1974 |
沙发床和床垫用聚烯烃带规范 |
(Specification for polyolefin webbing for divans and bed bases) |
BS 5128-1974 |
书画用薄膜尺寸规范 |
(Specification for sizes of film for graphic arts use) |
BS 5131-0-1991 |
鞋靴和鞋靴材料试验方法.第0部分:概述 |
(Methods of test for footwear and footwear materials - General introduction) |
BS 5131-1.1-1991 |
鞋靴和鞋靴材料试验方法.第1部分:粘合剂.第1节:粘合缝耐热性(蠕变试验) |
(Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to heat (creep test)) |
BS 5131-1.2-1991 |
鞋靴和鞋靴材料试验方法.第1部分:粘合剂.第2节:粘合缝耐剥离试验 |
(Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to peeling) |
BS 5131-1.3-1991 |
鞋靴和鞋靴材料试验方法.第1部分:粘合剂.第3节:对粘合剂(热熔粘合剂除外)进行耐热性(蠕变)和剥离试验时试样 |
(Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests) |
BS 5131-1.6-1979 |
鞋靴和鞋靴材料试验方法.粘合剂.对胶粘结合进行耐热性或耐剥离性试验前的推荐环境储存条件 |
(Methods of test for footwear and footwear materials - Adhesives - Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests) |
BS 5131-1.7-1991 |
鞋靴和鞋靴材料试验方法.第1部分:粘合剂.第7节:耐热性(蠕变)和耐剂剥离性试验用施加热熔胶粘剂试验组件的制 |
(Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests) |
BS 5131-1.8-1981 |
鞋靴和鞋靴材料试验方法.第1部分:胶粘剂.第8节:耐久热熔胶粘剂抗剪结合强度发育速度 |
(Methods of test for footwear and footwear materials - Adhesives - Rate of bond strength development in shear of hot melt adhesives for lasting) |
BS 5131-1.9-1985 |
鞋靴和鞋靴材料试验方法.第1部分:胶粘剂.第9节:胶粘结合原始强度的测量 |
(Methods of test for footwear and footwear materials - Adhesives - Measurement of green strength of adhesive joints) |
BS 5131-2.1-1991 |
鞋靴和鞋靴材料试验方法.第2部分:鞋底.第1节:鞋底材料抗切口延伸用罗斯氏屈绕法 |
Methods of test for footwear and footwear materials - Solings - Ross flexing method for cut growth resistance of soling materials |
BS 5131-2.11-1983 |
鞋靴和鞋靴材料试验方法.第2部分:鞋底.第11节:鞋底与热表面短时接触的耐热性 |
(Methods of test for footwear and footwear materials - Solings - Resistance of solings to short-term contact with a hot surface) |
BS 5131-2.7-1980 |
鞋靴和鞋靴材料试验方法.第2部分:鞋底.第7节:鞋底材料物理试验用试样的制备 |
(Methods of test for footwear and footwear materials - Solings - The preparation of test pieces from soling materials for physical testing) |
BS 5131-3.1-1991 |
鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第1节:垂直于针脚孔的鞋衬鞋帮材料强度 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Strength of upper materials and lining materials at right angles to stitch perforations) |
BS 5131-3.4-1978 |
鞋靴和鞋靴材料试验方法.鞋帮、织物和缝线.垂直于针脚孔的鞋帮材料强度 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Edgewise compressibility, upper materials) |
BS 5131-3.5-1978 |
鞋靴和鞋靴材料试验方法.鞋帮、织物和缝线.断裂/中空试验 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - The break/pipiness test) |
BS 5131-3.6-1991 |
鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第6节:鞋带的耐磨性 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Abrasion resistance of shoe laces) |
BS 5131-3.7-1991 |
鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第7节:鞋带的断裂强度 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Breaking strength of shoe laces) |
BS 5131-4.1-1975 |
鞋靴和鞋靴材料试验方法.其他部件.内底纸板的耐脱落性 |
(Methods of test for footwear and footwear materials - Other components - Resistance to peeling of insole board) |
BS 5131-4.2-1990 |
鞋靴和鞋靴材料试验方法.其它部件.纤维板的弯曲指数 |
(Methods of test for footwear and footwear materials - Other components - Flexing index of fibreboard) |
BS 5131-4.20-1985 |
鞋靴和鞋靴材料试验方法.第4部分:其他部件.第20节:拔出鞋后跟钉子所需的力 |
(Methods of test for footwear and footwear materials - Other components - Force required to pull heel pins out of shoe heels) |
BS 5131-4.5-1990 |
鞋靴和鞋靴材料试验方法.第4部分:其他部件.第5节:纤维纸板的抗拉强度 |
(Methods of test for footwear and footwear materials - Other components - Tensile strength of fibreboard) |
BS 5131-4.6-1975 |
鞋靴和鞋靴材料试验方法.其他部件.内底粘附助条的抗剪强度 |
(Methods of test for footwear and footwear materials - Other components - Shear strength of ribs stuck to insoles) |
BS 5131-4.7-1975 |
鞋靴和鞋靴材料试验方法.其他部件.内底粘附助条的耐脱落性 |
(Methods of test for footwear and footwear materials - Other components - Resistance to peeling of ribs stuck to insoles) |
BS 5131-4.8-1990 |
鞋靴和鞋靴材料的试验方法.其它部件.女鞋鞋跟的侧面抗冲击试验 |
(Methods of test for footwear and footwear materials - Other components - Resistance of heels of ladies’ shoes to lateral impact) |
BS 5131-4.9-1991 |
鞋靴和鞋靴材料试验方法.第4部分:其他部件.第9节:女鞋后跟的耐疲劳性 |
(Methods of test for footwear and footwear materials - Other components - Fatigue resistance of heels of ladies’ shoes) |
BS 5131-5.1-1991 |
鞋靴和鞋靴材料试验方法.第5部分:成品鞋靴试验.第1节:粘胶外底和模压外底的粘合力 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Adhesion of stuck-on and moulded-on soles) |
BS 5131-5.11-1981 |
鞋子和鞋料的试验方法.第5部分:成品鞋靴试验.第11节:扣系组件强度的测定 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Determination of the strength of buckle fastening assemblies) |
BS 5131-5.13-1980 |
鞋靴和鞋靴材料试验方法.成品鞋靴试验.鞋帮和衬里材料缝合牢度的测量 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Measurement of the strength of stitched seams in upper and lining materials) |
BS 5131-5.2-1991 |
鞋靴和鞋靴材料试验方法.第5部分:成品鞋靴试验.第2节:模压橡胶外底的硫化度 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Degree of vulcanization of moulded-on rubber soles) |
BS 5131-5.3-1990 |
鞋靴和鞋靴材料试验方法.第5部分:成品鞋靴试验.第3节:成品鞋靴的耐热性 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Resistance of complete footwear to heat) |
BS 5131-5.4-1978 |
鞋靴和鞋靴材料试验方法.成品鞋靴试验.外靴鞋底粘接的剥离强度 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Sole bond peeling strength) |
BS 5131-5.6-1991 |
鞋靴和鞋靴材料试验方法.第5部分:成品鞋靴试验.第6节:硬鞋底部件和鞋底的冲击试验 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Impact test for rigid units and shoe bottoms) |
BS 5131-5.7-1978 |
鞋子和鞋料的试验方法.第5部分:成品鞋靴试验.第7节:硬鞋底部件和鞋底的疲劳试验 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Fatigue test for rigid units and shoe bottoms) |
BS 5131-5.9-1979 |
鞋靴和鞋靴材料试验方法.成品鞋靴试验.鞋后跟掌面的强度 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Strength of top piece attachment to shoe heels) |
BS 5131-6.1-1981 |
鞋靴和鞋靴材料试验方法.实用规范.通过材料、部件和结构的穿着试验进行对比评价 |
(Methods of test for footwear and footwear materials - Codes of practice - Code of practice for the comparative evaluation by wear trial of materials, components or constructions) |
BS 5131-6.2-1979 |
鞋靴和鞋靴材料试验方法.实用规范.在鞋靴穿着试验中对设计或结构上的主要缺点进行鉴别和适用性评价的实用规 |
(Methods of test for footwear and footwear materials - Codes of practice - Code of practice for the identification in footwear wear trials of major weaknesses in design or construction and the assessme) |
BS 5138-1974 |
成品机制整体锻造和落锻冲压曲轴的磁粉探伤规范 |
(Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts) |
BS 5139-1991 |
一般用途模塑和挤塑聚丙烯和丙烯共聚物材料规范的制定方法 |
(Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion) |
BS 5141-1-1975 |
空气加热和冷却蛇管规范.第1部分:评价冷却蛇管的试验方法 |
(Specification for air heating and cooling coils - Method of testing for rating of cooling coils) |
BS 5141-2-1977 |
空气加热和冷却蛇管规范.第2部分:评价加热蛇管的试验方法 |
(Specification for air heating and cooling coils - Method of testing for rating of heating coils) |
BS 5142-1974 |
标准电池规范 |
(Specification for standard cells) |
BS 5158-1989 |
铸铁旋塞阀规范 |
(Specification for cast iron plug valves) |
BS 5159-1974 |
通用铸铁和碳钢球阀规范 |
(Specification for cast iron and carbon steel ball valves for general purposes) |
BS 5163-1986 |
水厂用双法兰铸铁楔形闸阀规范 |
(Specification for predominantly key-operated cast iron gate valves for waterworks purposes) |
BS 5164-1975 |
间接动作的电指示和记录仪表及附件规范 |
(Specification for indirect-acting electrical indicating and recording instruments and their accessories) |
BS 5167-1978 |
洗衣粉和清洁剂的包装.纤维板盒及筒的尺寸和容积 |
(Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard) |
BS 5168-1975 |
流变学名词术语词汇 |
(Glossary of rheological terms) |
BS 5169-1992 |
熔焊钢储气罐规范 |
(Specification for fusion welded steel air receivers) |
BS 5171-1974 |
结网线规范:水浸后长度变化的测定 |
(Specification for netting yarns: determination of change in length after immersion in water) |
BS 5173-100-1992 |
橡胶和塑料软管及软管组件的试验方法.第100部分:一般介绍 |
Method of test for rubber and plastics hoses and hose assemblies - General introduction |
BS 5173-102.10-1990 |
橡胶和塑料软管组件的试验方法.液压试验.吸油和泄水软管的静液压试验 |
Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose |
BS 5173-102.3-1988 |
橡胶和塑料软管及软管组件的试验方法.第102部分:液压试验.第3节:燃料分配泵软管的体积膨胀的测定 |
(Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses) |
BS 5173-102.4-1990 |
橡胶和塑料软管组件的试验方法.液压试验.液压软管体积膨胀的测定 |
Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses |
BS 5173-102.8-1987 |
橡胶和塑料软管及软管组件的试验方法.第102部分:液压试验.第8节:硬质螺纹增强热塑性塑料管的压力脉冲试验 |
Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses |
BS 5173-103.13-1994 |
橡胶和塑料软管与软管组件的试验方法.物理试验.抗燃性测定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of resistance to fire |
BS 5173-103.2-1990 |
橡胶和塑料软管组件的试验方法.物理试验.软管耐磨损性的测定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of crush resistance of hoses |
BS 5173-103.6-1990 |
橡胶和塑料软管组件的试验方法.物理试验.衬料可燃性测定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of ignitability of lining |
BS 5173-103.7-1991 |
橡胶和塑料软管组件的试验方法.物理试验.热塑软管用刚性聚合物螺纹钢筋耐断裂性测定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses |
BS 5173-106.2-1990 |
橡胶和塑料软管组件的试验方法.环境试验.高温老化试验的一般要求 |
(Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests) |
BS 5176-1975 |
硫化橡胶的分级系统规范 |
Specification for classification system for vulcanized rubbers |
BS 5176-2003 |
硫化橡胶的分类体系.规范 |
(Classification system for vulcanized rubbers - Specification) |
BS 5182-1975 |
用纤维图形仪测定精纺装置加工的羊毛纤维长度的方法 |
Method for the measurement of the length of wool fibres processed on the worsted system, using a fibre diagram machine |
BS 5186-1975 |
轴的中心高度规范 |
Specification for shaft centre heights |
BS 5188-1990 |
容积达1.4L、直径为85mm的液化或压缩不可燃气体用的一次性金属容器 |
Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gases |
BS 5189-3-1975 |
牙科铸造包埋料.第3部分:硅酸乙酯粘结的牙科铸造包埋料 |
Dental casting investments - Ethyl silicate-bonded investment materials |
BS 519-1950 |
铁路信号用衔铁上升式直流中性极化线路继电器规范 |
Specification for tractive armature direct current neutral-polar line relays for railway signalling |
BS 5190-1985 |
挤奶器用管滤器、滤体和滤清件规范 |
(Specification for pipeline filters, filter bodies and filter elements for milking installations) |
BS 5191-1975 |
生产计划和管理的术语词汇 |
(Glossary of production planning and control terms) |
BS 5191-2004 |
生产计划和控制.词汇 |
|
BS 5192-1-1993 |
生产管理导则.第1部分:序言 |
(Guide to production control - Introduction) |
BS 5192-2-1993 |
生产管理导则.第2部分:生产规划 |
(Guide to production control - Production programming) |
BS 5192-3-1993 |
生产管理导则.第3部分:定货法 |
(Guide to production control - Ordering methods) |
BS 5192-4-1993 |
生产管理导则.调度(职场控制) |
(Guide to production control - Dispatching (shop-floor control)) |
BS 5192-5-1993 |
生产管理导则.第5部分:生产管理和其他管理功能间的相互关系 |
(Guide to production control - The relationship between production control and other management functions) |
BS 5192-6-1993 |
生产管理导则.第6部分:计算机辅助生产管理 |
(Guide to production control - Computer aided production control) |
BS 5193-1991 |
涂料用磷酸锌颜料规范 |
(Specification for zinc phosphate pigments for paints) |
BS 5194-1-1991 |
外科器械.第1部分:不锈钢规范 |
(Surgical instruments. Specification for stainless steel) |
BS 5194-2-1990 |
外科器械.第2部分:带球形枢轴颈器械(不包括切割器械)规范 |
(Surgical instruments - Specification for instruments with pivot joints (excluding cutting instruments)) |
BS 5194-3-1986 |
外科器械.第3部分:解剖镊子规范 |
(Surgical instruments - Specification for dissecting forceps) |
BS 5194-4-1986 |
外科器械.第4部分:小剪刀、大剪刀和其他有关节的切割器械 |
(Surgical instruments - Specification for scissors, shears and other jointed cutting instruments) |
BS 5200-1997 |
水管接头和附件的尺寸规范 |
(Specification for dimensions of hydraulic connectors and adaptors) |
BS 5202-1-2000 |
烟叶和烟草制品的化学分析方法.可溶于盐酸的硅残留物的测定 |
(Methods for chemical analysis of tobacco and tobacco products - Determination of silicated residues insoluble in hydrochloric acid) |
BS 5202-10-2001 |
烟叶和烟草制品的化学分析方法.有机氯农药残留物的测定(气相色谱法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of organochlorine pesticide residues (gas chromatographic method) |
BS 5202-11-1983 |
烟叶和烟草制品的化学分析方法.第11部分:二硫代氨基甲酸酯残留物的测定 |
(Methods for chemical analysis of tobacco and tobacco products - Determination of dithiocarbamate residues) |
BS 5202-12-2000 |
烟草和烟草制品的化学分析方法.卷烟的烟雾冷凝物中烟碱含量的测定(气相色谱法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine in smoke condensate of cigarettes (gas-chromatographic method) |
BS 5202-13-2000 |
烟草和烟草制品的化学分析方法.卷烟烟雾冷凝物中水的测定(气相色谱法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of water in smoke condensate of cigarettes (gas chromatographic method) |
BS 5202-14-2000 |
卷烟和卷烟制品的化学分析方法.使用卷烟烟雾常规分析器测定总散粒物和无尼古丁干散粒物 |
Methods for chemical analysis of tobacco and tobacco products - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine |
BS 5202-15-1994 |
烟草和烟草制品的化学分析方法.卷烟烟浓缩物中水的测定(卡尔费歇尔法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of water in smoke condensates of cigarettes (Karl Fischer method) |
BS 5202-16-1996 |
烟叶和烟草制品的化学分析方法.第16部分:卷烟雾相烟雾中一氧化碳的测定(非色散红外分析法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method) |
BS 5202-17-1997 |
烟草和烟草制品的化学分析方法.烟碱纯度的测定.(重量计法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine purity (gravimetric method using tungstosilicic acid) |
BS 5202-18-1997 |
烟叶和烟草制品的化学分析方法.第18部分:空气中汽态烟碱的测定(气相色谱法) |
(Methods for chemical analysis of tobacco and tobacco products - Determination of vapour-phase nicotine in air (gas-chromatographic method)) |
BS 5202-19-1998 |
烟叶和烟草制品的化学分析方法.水含量的测定 |
Methods for chemical analysis of tobacco and tobacco products - Determination of water content (Karl Fischer method) |
BS 5202-1998 |
烟叶和烟草制品的化学分析方法.水含量的测定(Karl Ficher法) |
Methods for chemical analysis of tobacco and tobacco products. Determination of water content (Karl Fischer method) |
BS 5202-9-1992 |
烟草和烟草制品的化学分析方法.第9部分:卷烟中生物碱滞留量的测定 |
(Methods for chemical analysis of tobacco and tobacco products - Determination of alkaloid retention by filters of cigarettes (spectrometric method)) |
BS 5204-1-1975 |
直尺规范.第1部分:铸铁直尺(弓形与I型剖面) |
(Specification for straightedges - Cast iron straightedges (bow shaped and I-section)) |
BS 5204-2-1977 |
直尺规范.第2部分:钢质或花岗岩矩形截面直尺 |
(Specification for straightedges - Steel or granite straightedges of rectangular section) |
BS 5207-1975 |
电气设备用六氟化硫规范 |
(Specification for sulphur hexafluoride for electrical equipment) |
BS 5208-1975 |
小型内燃机用动力输出轴和安装面的尺寸规范 |
(Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines) |
BS 5209-1975 |
电气设备中六氟化硫的试验规程 |
(Code of practice for the testing of sulphur hexafluoride taken from electrical equipment) |
BS 5210-1975 |
闪烁器的标准尺寸规范 |
(Specification for standard dimensions of scintillators) |
BS 5212-1-1990 |
混凝土路面用冷施填封剂装置.第1部分:填封剂规范 |
(Cold applied joint sealant systems for concrete pavements - Specification for joint sealants) |
BS 5212-2-1990 |
混凝土路面.冷施填封剂装置.第2部分:填封剂施用实用规程 |
(Cold applied joint sealant systems for concrete pavements - Code of practice for the application and use of joint sealants) |