标准号 |
中文名称 |
英文名称 |
BS EN 60870-6-702-1999 |
遥控设备和系统.与ISO标准和ITU-T推荐规程一致的遥控协议.提供终端系统用TASE.2应用服务的功能概况 |
(Telecontrol equipment and systems - Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems) |
BS EN 60870-6-802-2002 |
遥测设备和系统.符合ISO标准和ITU-T推荐标准的远程控制协议.TASE.2目标模式 |
(Telecontrol equipment and systems - Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models) |
BS EN 60871-1-1998 |
额定电压超过1kV的交流电力系统用并联电容器.第1部分:总则、试验和额定值.安全要求.安装和运行指南 |
(Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - General, testing and rating - Safety requirements - Guide for installation and operation) |
BS EN 60871-4-1997 |
额定电压1Kv以上的交流电力系统用分路电容器.内部熔断器 |
(Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - Internal fuses) |
BS EN 60872-1-1999 |
船舶导航和无线电通信设备和系统.雷达标图装置.自动雷达标图装置(ARPA).试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Automatic radar plotting aids (ARPA) - Methods of testing and required test results) |
BS EN 60872-2-1999 |
船舶导航和无线电通信设备和系统.雷达标图装置.自动跟踪标图装置(ATA).试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Automatic tracking aids (ATA) - Methods of testing and required test results) |
BS EN 60872-3-2001 |
海上导航和无线电通信设备及系统.雷达测绘辅助设备.电子绘图手段(EPA).试验方法和所要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results) |
BS EN 60873-1-2004 |
工业过程控制系统用电动和气动模似图表记录仪.性能评定方法 |
|
BS EN 60873-1987 |
工业过程控制系统用电动和气动模似图表记录仪的性能评定方法 |
(Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems) |
BS EN 60873-2-2004 |
工业过程控制系统用电动和气动模似图表记录仪.检查和常规试验指南 |
|
BS EN 60873-2-2004 |
工业过程控制系统用电动和气动模似图表记录仪.检查和常规试验指南 |
|
BS EN 60874-1-1999 |
光纤和光缆连接器.通用规范 |
(Connectors for optical fibres and cables - Generic specification) |
BS EN 60874-17-1997 |
光纤和电缆的接头.纤维光学接头的部分规范.F-05型(磨擦锁定) |
(Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock)) |
BS EN 60874-19-1997 |
光纤和光缆连接器.光纤连接器的分规范.SC-D(双)型 |
(Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type SC-D (Duplex)) |
BS EN 60874-1997 |
光纤和光缆用连接器.光纤连接器的分规格.(SC-D)型(双制的) |
(Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type SC-D (Duplex)) |
BS EN 60875-1-1-1998 |
纤维光学分流装置.空白详细规格 |
(Fibre optic branching devices - Blank detail specification) |
BS EN 60875-1-2001 |
光纤分流装置.总规范 |
(Fibre optic branching devices - Generic specification) |
BS EN 60876-1-2001 |
光纤空间开关.总规范 |
(Fibre optic spatial switches - Generic specification) |
BS EN 60885-2-2003 |
电缆的电气试验方法.局部放电试验 |
(Electrical test methods for electric cables - Partial discharge tests) |
BS EN 60885-3-2003 |
电缆的电气试验方法.测量挤压电力电缆段局部放电的试验方法 |
(Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables) |
BS EN 60889-1997 |
架空线导线用硬拉制铝线 |
(Hard drawn aluminium wire for overhead line conductors) |
BS EN 60891-1995 |
对晶体硅光电器件测量特性I-V的温度修正和辐照度修正的方法 |
(Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices) |
BS EN 60893-1-1995 |
电工用热固性树脂基工业刚性层压板规范.第1部分:定义、标记和一般要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements) |
BS EN 60893-1-2004 |
电工用热固性树脂基工业硬质层压薄板规范.定义、标记和一般要求 |
|
BS EN 60893-1-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.定义、标记和一般要求 |
|
BS EN 60893-2-1995 |
电工用热固性树脂基工业刚性层压板规范.试验方法 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test) |
BS EN 60893-2-2004 |
电工用热固性树脂基工业硬质层压板规范.试验方法 |
|
BS EN 60893-2-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.试验方法 |
|
BS EN 60893-2-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.试验方法 |
|
BS EN 60893-3-1-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:专用材料规范.第1活页:工业刚性层压板 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Types of industrial rigid laminated sheets) |
BS EN 60893-3-1-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.工业钢性层压板类型要求 |
|
BS EN 60893-3-1-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.工业硬质层压薄板类型要求 |
|
BS EN 60893-3-2-2000 |
电工用热固性树脂基工业刚性层压板规范.单一材料规范.环氧树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on e) |
BS EN 60893-3-2-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.环氧树脂基刚性层压板要求 |
|
BS EN 60893-3-2-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.环氧树脂基硬质层压薄板要求 |
|
BS EN 60893-3-3-1995 |
电工用热固性树脂基工业刚性层压板规范.专用材料规范.三聚氰胺树脂基刚性层压薄板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on m) |
BS EN 60893-3-3-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.三聚氰胺树脂基刚性层压板要求 |
|
BS EN 60893-3-3-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.三聚氰胺树脂基硬质层压薄板要求 |
|
BS EN 60893-3-4-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:专用材料规范.第4活页:酚醛树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on p) |
BS EN 60893-3-4-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.酚醛树脂基刚性层压板要求 |
|
BS EN 60893-3-4-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.酚醛树脂基硬质层压薄板要求 |
|
BS EN 60893-3-5-1995 |
电工用热固性树脂基工业刚性层压板规范.专用材料规范.聚酯树脂基刚性层压薄板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on p) |
BS EN 60893-3-5-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.聚酯树脂基刚性层压板要求 |
|
BS EN 60893-3-5-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.聚酯树脂基硬质层压薄板要求 |
|
BS EN 60893-3-6-1995 |
电工用热固性树脂基工业刚性层压板规范.专用材料规范.硅氧烷树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on s) |
BS EN 60893-3-6-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.硅酮树脂基刚性层压板要求 |
|
BS EN 60893-3-6-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.硅酮树脂基硬质层压薄板要求 |
|
BS EN 60893-3-7-1995 |
电工用热固性树脂基工业刚性层压板规范.专用材料规范.聚酰亚胺树脂基刚性层压薄板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on p) |
BS EN 60893-3-7-2004 |
电工用热固性树脂基工业刚性层压板规范.单项材料规范.聚酰亚胺树脂基刚性层压板要求 |
|
BS EN 60893-3-7-2004 |
绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范 |
|
BS EN 60895-2003 |
带电作业.标称交流电压800kV及以下和直流电压±600kV的带电作业用导电服 |
(Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and) |
BS EN 60896-11-2003 |
固定式铅酸蓄电池组.透气型.一般要求和试验方法 |
(Stationary lead-acid batteries - General requirements and methods of test - Vented types - General requirements and methods of tests) |
BS EN 60896-2-1996 |
固定式铅酸蓄电池.一般要求和试验方法.第2部分:阀调节型 |
(Stationary lead-acid batteries - General requirements and methods of test - Valve regulated types) |
BS EN 60898-1-2003 |
家用和类似设施用的过电流保护断路器.交流操作断路器 |
(Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. operation) |
BS EN 60898-2-2001 |
家用和类似用途电器装置过电流保护断路器.交流和直流操作的线路断路器 |
(Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. and d.c. operation) |
BS EN 609-1-1999 |
农用和林业机械设备.原木劈木机安全.楔形劈木机 |
(Agricultural and forestry machinery - Safety of log splitters - Wedge splitters) |
BS EN 609-2-2000 |
农用和林业机械设备.原木分裂机安全.螺钉分裂机 |
Agricultural and forestry machinery - Safety of log splitters - Screw splitters |
BS EN 60900-1994 |
在交流电1000V和直流电1500V的情况下带电作业用的手工工具 |
(Hand tools for live working up to 1000 V a.c. and 1500 V d.c.) |
BS EN 60900-2004 |
带电作业.交流1000V和直流1500V及以下带电作业用手持工具 |
|
BS EN 60901-1996 |
单帽荧光灯的规范.性能规范 |
(Specification for single-capped fluorescent lamps - Performance specifications) |
BS EN 60903-1993 |
带电作业用绝缘材料制有指手套和无指手套规范 |
(Specification for gloves and mitts of insulating material for live working) |
BS EN 60903-2004 |
带电作业.绝缘材料制手套 |
|
BS EN 60904-1-1993 |
光电器件.第1部分:光电池电流.电压性能的测定 |
(Photovoltaic devices - Measurement of photovoltaic current-voltage characteristics) |
BS EN 60904-10-1998 |
光电器件.线性度测量方法 |
(Photovoltaic devices - Methods of linearity measurement) |
BS EN 60904-2-1993 |
光电器件.第2部分:基准太阳能电池的要求 |
(Photovoltaic devices - Requirements for reference solar cells) |
BS EN 60904-3-1993 |
光电器件.第3部分:带基准光谱辐照数据的地球光电太阳能器件的测量原理 |
(Photovoltaic devices - Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data) |
BS EN 60904-5-1996 |
光电器件.第5部分:用开路电压法对光伏装置的等效电池温度的测定 |
(Photovoltaic devices - Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method) |
BS EN 60904-6-1995 |
光电器件.太阳能模式参数要求 |
(Photovoltaic devices - Requirements for reference solar modules) |
BS EN 60904-7-1998 |
光电器件.光电器件的试验中波谱失调错误传输计算 |
(Photovoltaic devices - Computation of spectral mismatch error introduced in the testing of a photovoltaic device) |
BS EN 60904-8-1998 |
光电器件.光电器件波谱反应的测量 |
(Photovoltaic devices - Measurement of spectral response of a photovoltaic (PV) device) |
BS EN 60908-1999 |
录音.光盘数字音响系统 |
(Audio recording - Compact disc digital audio system) |
BS EN 60909-0-2001 |
三相交流系统内短路电流.电流的计算 |
(Short-circuit currents in three-phase a.c. systems - Calculation of currents) |
BS EN 60917-1-1999 |
电子设备机械结构研制用模数序列.一般标准 |
(Modular order for the development of mechanical structures for electronic equipment practices - Generic standard) |
BS EN 60917-2-1-1997 |
研制电子设备机械构件用模块排序.25mm设备的接口配合尺寸的分规范.第1节:机壳和支架的尺寸 |
Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and racks |
BS EN 60917-2-1994 |
研制电子设备机械构件用模块排序.第2部分:25mm设备的接口配合尺寸的分规范 |
(Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice) |
BS EN 60917-2-2-1997 |
研制电子设备机械构件用模块排序.25mm设备的接口配合尺寸的分规范.第2节:辐助框架、底盘、底板、面板及插入件 |
Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for subracks, chassis, backpl |
BS EN 60921-1991 |
管形荧光灯镇流器.性能要求 |
Specification for ballasts for tubular fluorescent lamps - Performance requirements |
BS EN 60921-2005 |
管形荧光灯镇流器.性能要求 |
|
BS EN 60921-2005 |
管形荧光灯镇流器.性能要求 |
|
BS EN 60923-1996 |
电灯用辅助设备.放电灯(管形荧光灯除外)镇流器.性能要求(IEC 923-88) |
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
BS EN 60925-1991 |
管形荧光直流电源镇流器性能要求规范 |
Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps |
BS EN 60927-1997 |
灯的附件规范.启动装置(辉光启动器除外).性能要求 |
Specification for auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements |
BS EN 60929-1992 |
管形荧光灯交流电源镇流器规范.性能要求 |
Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
BS EN 60929-2004 |
管形荧光灯用交流电子镇流器规范.性能要求 |
|
BS EN 60931-1-1998 |
额定电压1000V(包括1000V)以下的交流系统用非自动恢复型分流电力电容器.概述.性能、试验和额定值.安全要求. |
(Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General - Performance, testing and rating - Safety requirements - Guide for inst) |
BS EN 60931-2-1996 |
额定电压在1000V以下(含1000V)交流系统用非自恢复型分流电力电容器.老化试验和破坏试验 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test and destruction test |
BS EN 60931-3-1997 |
大于等于1000V电压的交流系统用非自愈并联电力电容器.第3部分:内部熔断器 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Internal fuses |
BS EN 60933-3-1993 |
音频、视频和视听系统.互连和匹配值.第3部分:使用625行,50帧无混合信号的便携式VTRs和ENG摄像机互连接口规范 |
Audio, video and audiovisual systems - Interconnections and matching values - Specification for interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems |
BS EN 60933-4-1994 |
音频、视频和视听系统.互连和匹配值.第4部分:内部数字总线用连接器和接线点 |
Audio, video and audiovisual systems - Interconnections and matching values - Connector and cordset for domestic digital bus (D2B) |
BS EN 60933-5-1993 |
音频、视频和视听系统.互连和匹配值.录像系统Y/C连接器.连接器的电匹配值和描述 |
Audio, video and audiovisual systems - Interconnections and matching values - Specification for Y/C connector for video systems - Electrical matching values and description of the connector |
BS EN 60934-2001 |
设备断路器 |
Circuit-breakers for equipment (CBE) |
BS EN 60936-1-2000 |
船舶导航和无线电通信设备和系统.雷达.船用雷达.性能要求.试验方法和需要的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Radar - Shipborne radar - Performance requirements - Methods of testing and required test results) |
BS EN 60936-2-1999 |
船舶导航和无线电通信设备和系统.雷达.高速驳船(HSC)用舰艇雷达.试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Radar - Shipborne radar for high speed craft (HSC) - Methods of testing and required test results) |
BS EN 60936-3-2002 |
船舶导航和无线电通信设备及系统.雷达.有海图设备的雷达性能要求.试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Radar - Radar with chart facilities - Performance requirements - Methods of testing and required test results) |
BS EN 60938-1-2000 |
电磁干扰抑制用固定电感器.通用规范 |
(Fixed inductors for electromagnetic interference suppression - Generic specification) |
BS EN 60938-2-1-2000 |
电磁干扰抑制用固定电感器.空白详细规范.要求做安全试验的电感器.评估等级D |
(Fixed inductors for electromagnetic interference suppression - Blank detail specification - Inductors for which safety tests are required - Assessment level D) |
BS EN 60938-2-2-2000 |
电磁干扰抑制用固定电感器.空白详细规范.仅要求做安全试验的电感器 |
(Fixed inductors for electromagnetic interference suppression - Blank detail specification - Inductors for which safety tests are required (only)) |
BS EN 60938-2-2000 |
电磁干扰抑制用固定电感器.分规范 |
(Fixed inductors for electromagnetic interference suppression - Sectional specification) |
BS EN 60939-2-1-2005 |
抑制无线电干扰用整套滤波装置.空白详细规范.抑制电磁干扰用无源过滤装置.要求安全试验的过滤器(评定等级D/DZ) |
|
BS EN 60939-2-2-2005 |
抑制无线电干扰用整套滤波装置.空白详细规范.抑制电磁干扰用无源过滤装置.要求安全试验的过滤器(只用于安全试验) |
|
BS EN 60939-2-2005 |
抑制电磁干扰用无源滤波装置.分规范:要求安全试验的无源滤波装置.试验方法和一般要求 |
|
BS EN 60942-2003 |
电声学.音响校准器 |
(Electroacoustics - Sound calibrators) |
BS EN 60945-2003 |
海上导航和无线电设备及系统.一般要求.试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results) |
BS EN 60947-1-1999 |
低压开关和控制设备规范.一般规则 |
(Specification for low-voltage switchgear and controlgear - General rules) |
BS EN 60947-1-2004 |
低压开关设备和控制设备规范.总则 |
|
BS EN 60947-2-2003 |
低压开关设备和控制设备规范.断路器 |
(Specification for low-voltage switchgear and controlgear - Circuit-breakers) |
BS EN 60947-3-1999 |
低压开关和控制装置.开关,断路器,开关断路器和熔燃单 |
(Specification for low-voltage switchgear and controlgear - Switches, disconnectors, switch-disconnectors and fuse-combination units) |
BS EN 60947-4-1-2001 |
低压开关设备和控制设备规范.接触器和启动器.电动机械接触器和启动器 |
(Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters) |
BS EN 60947-4-2-2000 |
低压开关设备和控制设备规范.接触器和电动机起动器.交流半导体电动机控制器和起动器 |
(Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor motor controllers and starters) |
BS EN 60947-4-3-2000 |
低压开关设备和控制设备规范.接触器和电动机起动器.交流半导体控制器和非电动机负载用起动器 |
(Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads) |
BS EN 60947-5-1-1998 |
低压开关设备和控制设备规范.控制电路器件和切换件.机电控制电路器件 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Electromechanical control circuit devices) |
BS EN 60947-5-1-2004 |
低压开关设备和控制设备规范.控制电路器件和切换件.机电控制电路器件 |
|
BS EN 60947-5-1-2004 |
低压开关设备和控制设备规范.控制电路器件和切换件.机电控制电路器件 |
|
BS EN 60947-5-1-2004 |
低压开关设备和控制设备规范.控制电路器件和切换件.机电控制电路器件 |
|
BS EN 60947-5-2-1999 |
低压开关设备和控制设备规范.控制电路设备和开关件.接近开关 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Proximity switches) |
BS EN 60947-5-3-1999 |
低压开关设备和控制设备规范.控制电路设备和开关件.错误条件下(PDF)固定行为临近装置的要求 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)) |
BS EN 60947-5-4-1997 |
低压开关设备和控制设备的规范.控制线路装置和开关件.低能量接触性能评估.特殊试验 |
Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Methods of assessing the performance of low energy contacts - Special tests |
BS EN 60947-5-5-1998 |
低压开关设备和控制设备规范.控制线路设备和开关件.用机械锁定功能的紧急停电装置 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Electrical emergency stop devices with mechanical latching function) |
BS EN 60947-5-6-2001 |
低压开关设备和控制设备规范.控制电路设备和开关件.近接传感器和开关放大器用直流接口(NAMUR) |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)) |
BS EN 60947-5-7-2003 |
低压开关设备和控制设备规范.控制电路装置和开关件.带模拟输出的邻近设备的要求 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Requirements for proximity devices with analogue output) |