标准号 |
中文名称 |
英文名称 |
BS 7623-1993 |
工业处理控制系统用电气和气动模拟图记录器.检验和常规试验指南 |
(Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Guidance for inspection and routine testing) |
BS 7624-2004 |
热输入值6KW及以下的家用直燃式滚筒干燥机的安装和维修(二类和三类燃气).规范 |
|
BS 7629-1-1997 |
受火影响时,低扩散烟雾和腐蚀性气体300/500 V电缆耐火规范.第1部分:多心电缆 |
(Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables) |
BS 7629-2-1997 |
受火影响时,低扩散烟雾和腐蚀性气体300/500 V电缆耐火规范.第2部分:多双股电缆 |
(Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables) |
BS 7632-1993 |
感应热发生设备用电容器的内部熔断器和内部过压断路器 |
(Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants) |
BS 7634-1993 |
医用送气管线系统用氧化浓缩机规范 |
(Specification for oxygen concentrators for use with medical gas pipeline systems) |
BS 7637-1993 |
线性运动、循环球、套管型滚动轴承规范(米制系列) |
(Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)) |
BS 7638-1993 |
低压径向配电制中短路电流计算的应用指南 |
(Application guide for calculation of short-circuit currents in low-voltage radial systems) |
BS 764-1990 |
紧急照明系统用的自动转换接触器规范 |
(Specification for automatic change-over contactors for emergency lighting systems) |
BS 7641-1993 |
建筑物的性能标准.面积和空间显示数的计算和定义 |
(Performance standards in building - Definition and calculation of area and space indicators) |
BS 7642-1993 |
建筑物的性能标准.性能评定标准的格式和内容 |
(Performance standards in building - Contents and format of standards for evaluation of performance) |
BS 7643-1-1993 |
房屋建筑.第1部分:用户要求的表示.供热要求 |
(Building construction - Expression of users’ requirements - Thermal requirements) |
BS 7643-2-1993 |
房屋建筑.第2部分:用户要求的表示.空气纯度要求 |
(Building construction - Expression of users’ requirements - Air purity requirements) |
BS 7643-3-1993 |
房屋建筑.第3部分:用户要求的表示.声学要求 |
(Building construction - Expression of users’ requirements - Acoustical requirements) |
BS 7644-1-1993 |
直接张力指示器.第1部分:可压缩垫圈规范 |
(Direct tension indicators - Specification for compressible washers) |
BS 7644-2-1993 |
直接拉力指示器.螺母面和螺栓面垫圈规范 |
(Direct tension indicators - Specification for nut face and bolt face washers) |
BS 7645-1993 |
颜色命名规范 |
(Code for designation of colours) |
BS 7647-1993 |
费率和负载控制用无线电远程开关的规范 |
(Specification for radio teleswitches for tariff and load control) |
BS 7649-1993 |
软件用户文件的设计和制备指南 |
(Guide to the design and preparation of documentation for users of application software) |
BS 7652-1-1993 |
预装注射器.第1部分:牙科用玻璃柱形局部麻醉夹头规范 |
(Prefilled syringes - Specification for glass cylinders for dental local anaesthetic cartridges) |
BS 7652-2-1995 |
预灌装注射器.第2部分:牙科局部麻醉器玻璃管用柱塞和盘柄 |
(Prefilled syringes - Specification for plungers and discs for dental local anaesthetic cartridges) |
BS 7654-1997 |
低压公用配电系统单相路灯. 熔断器规范.额定电流为25A的公路供电电源和街道附属设施 |
(Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems - 25 A rating for highway power supplies and street furniture) |
BS 7655-0-1997 |
电缆用绝缘和铠装材料规范.一般说明 |
(Specification for insulating and sheathing materials for cables - General introduction) |
BS 7655-1.1-2000 |
电缆用绝缘和铠装材料规范.弹性绝缘化合物.协调型 |
(Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Harmonized types) |
BS 7655-1.2-1997 |
电缆用绝缘和铠装材料规范.弹性绝缘合成材料.一般90℃时用 |
(Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - General 90 鳦 application) |
BS 7655-1.3-2000 |
电缆用绝缘和铠装材料规范.弹性绝缘化合物.XLPE |
(Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE) |
BS 7655-1.4-2000 |
电缆用绝缘和铠装材料规范.弹性绝缘化合物.耐油型 |
(Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types) |
BS 7655-1.5-2000 |
电缆用绝缘和铠装材料规范.弹性绝缘化合物.耐火化合物 |
(Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Flame retardant composites) |
BS 7655-1.6-2000 |
电缆用绝缘和铠装材料规范.弹性绝缘化合物.线圈和铅型 |
(Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Coil end lead types) |
BS 7655-10.1-2000 |
电缆用绝缘和铠装材料规范.聚乙烯铠装化合物.热塑中等密度聚乙烯(MDPE)铠装化合物 |
(Specification for insulating and sheathing materials for cables - Polyethylene sheathing compounds - Thermoplastic medium density polyethylene (MDPE) sheathing compound) |
BS 7655-11.1-1997 |
电缆用绝缘和铠装材料规范.多种绝缘化合物.协调交联PVC型 |
(Specification for insulating and sheathing materials for cables - Miscellaneous insulating compounds - Harmonized cross-linked PVC types) |
BS 7655-12.1-2000 |
电缆用绝缘和铠装材料规范.混杂铠装化合物.协调热塑聚氨酯铠装化合物 |
(Specification for insulating and sheathing materials for cables - Miscellaneous sheathing compounds - Harmonized thermoplastic polyurethane sheathing compound) |
BS 7655-12.2-1997 |
电缆用绝缘和铠装材料规范.多种铠装化合物.协调交联PVC型 |
(Specification for insulating and sheathing materials for cables - Miscellaneous sheathing compounds - Harmonized cross-linked PVC types) |
BS 7655-2.1-2000 |
电缆用绝缘和铠装材料规范.弹性铠装化合物.协调型 |
(Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - Harmonized types) |
BS 7655-2.2-1993 |
电缆绝缘和铠装材料规范.第2部分:合成橡胶铠装材料.第2节:耐热型 |
(Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - Heat resisting types) |
BS 7655-2.3-2000 |
电缆用绝缘和铠装材料规范.弹性铠装化合物.一般应用 |
(Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application) |
BS 7655-2.4-2000 |
电缆用绝缘和铠装材料规范.弹性铠装化合物.焊接电缆外包物 |
(Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - Welding cable covering) |
BS 7655-2.6-2000 |
电缆用绝缘和铠装材料规范.弹性铠装化合物.船线和近海装置铠装化合物 |
(Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - Sheating compounds for ships’ wiring and offshore applications) |
BS 7655-3.1-1997 |
电缆用绝缘材料和铠和装材料规范.第2部分:PVC绝缘材料.第1节:调和型 |
(Specification for insulating and sheathing materials for cables - PVC insulating compounds - Harmonized types) |
BS 7655-3.2-2000 |
电缆用绝缘和铠装材料规范.PVC绝缘化合物.硬级型 |
(Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types) |
BS 7655-4.1-1997 |
电缆用绝缘材料和铠装材料规范.第4部分:PVC铠装材料.第1节:调和型 |
(Specification for insulating and sheathing materials for cables - PVC sheathing compounds - Harmonized types) |
BS 7655-4.2-2000 |
电缆用绝缘和铠装材料规范.PVC铠装化合物.一般应用 |
(Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application) |
BS 7655-4.3-2000 |
电缆用绝缘和铠装材料规范.PVC铠装化合物.特殊应用,RF电缆 |
(Specification for insulating and sheathing materials for cables - PVC sheathing compounds - Special applications - RF cables) |
BS 7655-5.1-1997 |
电缆绝缘和铠装材料规范.具有低腐蚀性气体排放的和适用于着火时盅膛欧诺牡缋碌慕涣底榧调合交联型 |
(Specification for insulating and sheathing materials for cables - Cross-linked insulating compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke) |
BS 7655-6.1-1997 |
电缆绝缘和铠装材料规范.具有低排放腐蚀性气体的和适用于着火时盅膛欧诺缋碌慕涣底榧常规应用的热塑型 |
() |
BS 7655-8.1-2000 |
电缆用绝缘和铠装材料规范.适用于火焰影响下烟雾低散发电缆的有腐蚀性气体低散发的交叉链接铠装化合物.协调 |
(Specification for insulating and sheathing materials for cables - Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke w) |
BS 7655-8.2-1997 |
电缆绝缘和铠装材料规范.具有低排放腐射气体的和适用于着火时低蜒膛欧诺缋碌慕涣底榧普通负载耐油型 |
(Specification for insulating and sheathing materials for cables - Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke w) |
BS 7656-1993 |
电杆上的低压熔断器规范.315A额定电流 |
(Specification for low-voltage pole-mounting fuses (cut-outs) - 315 A rating) |
BS 7657-1993 |
建筑物供电电源的最大额定电流100A的辅助接线板和连接件及熔断器(断电)规范 |
(Specification for fuses (cut-outs), ancillary terminal blocks and interconnecting units up to 100 A rating, for power supplies to buildings) |
BS 7658-2-1993 |
碳纤维.第2部分:线性密度的测定方法 |
(Carbon fibre - Method for determination of linear density) |
BS 7659-1994 |
狗护嘴规范 |
(Specification for dog muzzles) |
BS 7660-1993 |
通用安全销规范 |
(Specification for safety pins for general use) |
BS 7661-1993 |
作为漂浮手段佩带的臂章规范 |
(Specification for inflatable armbands worn as flotation aids) |
BS 7662-1993 |
切削加工用硬削切材料应用.排屑组和应用组名称与符号 |
(Application of hard cutting materials for machining by chip removal - Designation of the main groups of chip removal and groups of application) |
BS 7663-1993 |
片型和管型电绝缘材料介电常数和耗散因数测定的试验方法 |
(Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form) |
BS 7664-2000 |
底涂层和面涂层涂料规范 |
(Specification for undercoat and finishing paints) |
BS 7666-1-2000 |
地理定位用空间数据集.街道地名辞典规范 |
(Spatial data-sets for geographical referencing - Specification for a street gazetteer) |
BS 7666-2-2000 |
地理定位用空间数据集.地址规范 |
(Spatial data-sets for geographical referencing - Specification for a land and property gazetteer) |
BS 7666-3-2000 |
地理定位用空间数据集.地址规范 |
(Spatial data-sets for geographical referencing - Specification for addresses) |
BS 7666-4-2002 |
地理定位用空间数据组.记录道路公权的规范 |
(Spatial data-sets for geographical referencing - Specification for recording public rights of way) |
BS 7667-1-1993 |
感官器分析鉴定员对已选定的鉴定员的挑选.培训和监督指南 |
(Assessors for sensory analysis - Guide to the selection, training and monitoring of selected assessors) |
BS 7667-2-1994 |
感观分析鉴定.选择指南.专家监督管理和训练 |
(Assessors for sensory analysis - Guide to the selection, training and monitoring of experts) |
BS 7668-1994 |
可焊结构钢规范.耐老化钢中热加工结构钢的空心横截面积 |
(Specification for weldable structural steels - Hot finished structural hollow sections in weather resistant steels) |
BS 7668-2004 |
可焊结构钢.抗风化钢制热加工结构钢空心型材.规范 |
|
BS 7669-3-1994 |
车辆减震系统.安全护栏的安装、检查和修理指南 |
(Vehicle restraint systems - Guide to the installation, inspection and repair of safety fences) |
BS 7670-1-1993 |
电阻凸埋焊用钢螺母和螺栓.第1部分:尺寸和性能规范 |
(Steel nuts and bolts for resistance projection welding - Specification for dimensions and properties) |
BS 7670-2-1997 |
电阻凸焊的钢螺母和螺栓.焊接螺母和螺栓的焊接规范 |
(Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts) |
BS 7671-2001 |
电气设备的要求.IEE布线规则.第16版 |
(Requirements for electrical installations - IEE Wiring Regulations - Sixteenth edition) |
BS 7672-1993 |
抗栓塞袜的压缩、硬挺度和标记规范 |
(Specification for compression, stiffness and labelling of anti-embolism hosiery) |
BS 7674-1993 |
核电站.安全仪表和控制系统.电源的要求 |
(Nuclear power plants - Instrumentation and control systems important for safety - Requirements for electrical supplies) |
BS 7675-1993 |
滑动轴承.薄壁半轴承.周长的检验 |
(Plain bearings - Thin-walled half bearings - Checking of peripheral length) |
BS 7676-2-1993 |
齿轮验收规范.验收试验中齿轮机构机械振动的测定 |
(Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing) |
BS 7677-1993 |
管道接头用密封圈缺陷分类的推荐方法 |
(Recommendations for classification of imperfections in pipe joint rings) |
BS 7679-1993 |
滑动轴承.质量控制技术和几何特性及材料质量特性的检验 |
(Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics) |
BS 768-1958 |
开槽平头螺钉规范 |
(Specification for slotted grub screws) |
BS 7680-1993 |
烟草和烟草制品术语词汇 |
(Glossary of terms for tobacco and tobacco products) |
BS 7683-1993 |
生咖啡缺陷指南 |
(Guide to defects of green coffee) |
BS 7686-1993 |
埋弧炉试验方法 |
(Test methods for submerged-arc furnaces) |
BS 7688-1993 |
电渣重熔炉试验方法 |
(Test methods for electro-slag remelting furnaces) |
BS 7689-1993 |
带电子枪电热装置试验方法 |
(Test methods for electroheating installations with electron guns) |
BS 7690-1993 |
感应槽式炉试验方法 |
(Test methods for induction channel furnaces) |
BS 7691-1994 |
农业和园艺用电子设备抗环境条件的测试方法 |
(Methods for testing resistance to environmental conditions of electronic equipment used in agriculture and horticulture) |
BS 7693-1993 |
红外透射应用和系统间干扰防止或控制指南 |
(Guide to uses of infra-red transmission and the prevention or control of interference between systems) |
BS 7694-1993 |
试验筛和试验筛分术语词汇 |
(Glossary of terms for test sieves and test sieving) |
BS 7697-1993 |
低压公用供电系统的标称电压 |
(Nominal voltages for low voltage public electricity supply systems) |
BS 7698-1-1993 |
往复式内燃机驱动的交流发电机组.第1部分:应用、额定值和性能规范 |
(Reciprocating internal combustion engine driven alternating current generating sets - Specification for application, ratings and performance) |
BS 7698-10-1999 |
往复式内燃机驱动交流发电机组.用外壳表面法对气载噪音的测定 |
(Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method) |
BS 7698-12-1998 |
往复式内燃机驱动交流发电设备.带安全装置的应急供电设备 |
(Reciprocating internal combustion engine driven alternating current generating sets - Emergency power supply to safety devices) |
BS 7698-2-1993 |
往复式内燃机驱动的交流发电机组.第2部分:发动机规范 |
(Reciprocating internal combustion engine driven alternating current generating sets - Specification for engines) |
BS 7698-3-1993 |
往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机规范 |
(Reciprocating internal combustion engine driven alternating current generating sets - Specification for alternating current generators for generating sets) |
BS 7698-4-1993 |
住复式内燃机驱动交流发电机组.第4部分:控制设备和开关设备规范 |
(Reciprocating internal combustion engine driven alternating current generating sets - Specification for controlgear and switchgear) |
BS 7698-5-1993 |
往复式内燃机驱动交流发电机组.第5部分:发电机组规范 |
(Reciprocating internal combustion engine driven alternating current generating sets - Specification for generating sets) |
BS 7698-6-1993 |
往复式内燃机驱动交流发电机组.第6部分:试验方法 |
(Reciprocating internal combustion engine driven alternating current generating sets - Test methods) |
BS 7698-7-1996 |
往复式内燃机驱动的交流发电机组.规范和设计的技术申报 |
(Reciprocating internal combustion engine driven alternating current generating sets - Technical declarations for specification and design) |
BS 7698-8-1996 |
往复式内燃机驱动的交流发电机组.低功率发电机组要求和试验 |
(Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets) |
BS 7698-9-1996 |
往复式内燃机驱动的交流发电机组.机械振动的测量和评定 |
(Reciprocating internal combustion engine driven alternating current generating sets - Measurement and evaluation of mechanical vibrations) |
BS 7699-8-1994 |
电热装置安全规范.第8部分:电渣重熔炉的殊要求 |
(Specification for safety in electroheat installations - Particular requirements for electro-slag remelting furnaces) |
BS 770-1-1986 |
奶酪的化学分析法.一般介绍 |
(Methods for chemical analysis of cheese - General introduction) |
BS 770-10-1986 |
奶酪的化学分析法.第10部分:总固体含量的测定(比较法) |
(Methods for chemical analysis of cheese - Determination of total solids content (reference method)) |
BS 770-11-1997 |
乳酪的化学分析方法.经过处理的乳酪和乳酪制品中添加的柠檬酸盐乳化剂和酸化剂/pH值控制剂的含量计算 |
(Methods for chemical analysis of cheese - Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents in processed cheese and processed cheese products) |
BS 770-2-1976 |
奶酪的化学分析法.第2部分:水分含量的测定 |
(比较法和常规法(Methods for chemical analysis of cheese - Determination of water content (reference and routine methods)) |
BS 770-3-1989 |
奶酪的化学分析法.脂肪含量的测定(比较法) |
(Methods for chemical analysis of cheese - Determination of fat content (reference method)) |
BS 770-4-1989 |
奶酪的化学分析法.氯化物含量的测定 |
(Methods for chemical analysis of cheese - Determination of chloride content) |
BS 770-5-1976 |
奶酪的化学分析法.第5部分:pH值的测定 |
(Methods for chemical analysis of cheese - Determination of pH value) |
BS 770-6-1984 |
奶酪的化学分析法.第6部分:全磷含量的测定(分子吸收光谱法) |
(Methods for chemical analysis of cheese - Determination of total phosphorus content - Molecular absorption spectrometric method) |
BS 770-7-1997 |
奶酪的化学分析法.奶酪和加工过的奶酪制品中柠檬酸含量的测定(酵素法) |
(Methods for chemical analysis of cheese - Determination of citric acid content of cheese and processed cheese products (enzymatic method)) |
BS 770-8-1987 |
奶酪的化学分析法.第8部分:氮含量的测定(比较法) |
(Methods for chemical analysis of cheese - Determination of nitrogen content (reference method)) |
BS 770-9-1985 |
奶酪的化学分析法.第9部分:硝酸盐和亚硝酸盐含量的测定(镉还原法和光度法) |
(Methods for chemical analysis of cheese - Determination of nitrate and nitrite contents - Cadmium reduction and photometry method) |
BS 7700-1994 |
涂料用云母铁矿晶体颜料.规范和试验方法 |
(Micaceous iron oxide pigments for paints - Specifications and test methods) |
BS 7701-1993 |
含冷致轻质烃液罐液位测量用浮子式液位计规范 |
(Specification for float-type level gauges for measuring liquid levels in tanks containing refrigerated light-hydrocarbon fluids) |
BS 7702-1993 |
粘性碳氢化合物体积测量指南 |
(Guide to volumetric metering of viscous hydrocarbons) |
BS 7704-1993 |
电工用硅油规范 |
(Specifications for silicone liquids for electrical purposes) |
BS 7705-1993 |
专用轮式林业机械制动系统规范 |
(Specification for brake systems for special wheeled forestry machines) |
BS 7706-1993 |
裂纹的探伤、定位及尺寸用超声时间损耗衍射技术的校正及确定指南 |
(Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws) |
BS 7707-1993 |
400kN-4000kN(含40000kN)额定力机械直边单作用型动力压力机规范 |
(Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force) |
BS 7708-1993 |
250kN-400kN额定力机械直边高速型动力压力机规范 |
(Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force) |
BS 7709-1-1993 |
玻璃萃取液的分析.第1部分:二氧化硅的分子吸收光谱测定法 |
(Analysis of extract solutions of glass - Method for determination of silicon dioxide by molecular absorption spectrometry) |
BS 7709-2-1993 |
玻璃萃取液的分析.第2部分:氧化钠和氧化钾的火焰光谱测定法 |
(Analysis of extract solutions of glass - Method for determination of sodium oxide and potassium oxide by flame spectrometric methods) |
BS 7709-3-1993 |
玻璃萃取液的分析.第3部分:氧化钙和氧化镁的火焰吸收光谱测定法 |
(Analysis of extract solutions of glass - Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry) |
BS 7709-4-1993 |
玻璃萃取液的分析.第4部分:二氧化铝的分子吸收光谱测定法 |
(Analysis of extract solutions of glass - Method for determination of aluminium oxide by molecular absorption spectrometry) |