标准号 |
中文名称 |
英文名称 |
BS EN ISO 15783-2003 |
无密封旋转动力泵.II级.规范 |
(Seal-less rotodynamic pumps - Class II - Specification) |
BS EN ISO 15785-2002 |
技术制图.符号编写和加压粘合叠层连接件 |
(Technical drawings - Symbolic presentation and indication of adhesive fold and pressed joints) |
BS EN ISO 15788-2-2004 |
动植物脂肪和油.植物油中豆固醇的测定.高效液相色谱分析法 |
|
BS EN ISO 15788-2-2004 |
动植物脂肪和油.植物油中豆固醇的测定.高效液相色谱分析法 |
|
BS EN ISO 15798-2001 |
眼科植入物.黏弹性眼科植入装置 |
(Ophthalmic implants - Ophthalmic viscosurgical devices) |
BS EN ISO 1580-1994 |
开槽平头螺钉.A级产品 |
(Slotted pan head screws - Product grade A) |
BS EN ISO 15831-2004 |
服装.生理效应.热人体模型热绝缘的测量 |
|
BS EN ISO 15867-2004 |
非危险货物用中间散货容器.术语 |
|
BS EN ISO 15874-1-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).总则 |
|
BS EN ISO 15874-1-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).总则 |
|
BS EN ISO 15874-2-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).管 |
|
BS EN ISO 15874-2-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).管 |
|
BS EN ISO 15874-3-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).配件 |
|
BS EN ISO 15874-3-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).配件 |
|
BS EN ISO 15874-5-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).系统的适用性 |
|
BS EN ISO 15874-5-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).系统的适用性 |
|
BS EN ISO 15875-1-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.总则 |
|
BS EN ISO 15875-1-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.总则 |
|
BS EN ISO 15875-2-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.管道 |
|
BS EN ISO 15875-2-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.管道 |
|
BS EN ISO 15875-3-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.配件 |
|
BS EN ISO 15875-3-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.配件 |
|
BS EN ISO 15875-5-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.系统的适用性 |
|
BS EN ISO 15875-5-2004 |
冷热水装置用塑料管道系统.交联聚乙烯.系统的适用性 |
|
BS EN ISO 15876-1-2004 |
冷热水装置用塑料管道系统.聚丁烯.总则 |
|
BS EN ISO 15876-1-2004 |
冷热水装置用塑料管道系统.聚丁烯.总则 |
|
BS EN ISO 15876-2-2004 |
冷热水装置用塑料管道系统.聚丁烯.管道 |
|
BS EN ISO 15876-2-2004 |
冷热水装置用塑料管道系统.聚丁烯.管道 |
|
BS EN ISO 15876-3-2004 |
冷热水装置用塑料管道系统.聚丁烯.配件 |
|
BS EN ISO 15876-3-2004 |
冷热水装置用塑料管道系统.聚丁烯.配件 |
|
BS EN ISO 15876-5-2004 |
冷热水装置用塑料管道系统.聚丁烯.系统的适用性 |
|
BS EN ISO 15876-5-2004 |
冷热水装置用塑料管道系统.聚丁烯.系统的适用性 |
|
BS EN ISO 15877-1-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.总则 |
|
BS EN ISO 15877-1-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.总则 |
|
BS EN ISO 15877-2-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.管道 |
|
BS EN ISO 15877-2-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.管道 |
|
BS EN ISO 15877-2-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.管道 |
|
BS EN ISO 15877-3-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.配件 |
|
BS EN ISO 15877-3-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.配件 |
|
BS EN ISO 15877-5-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.系统的适用性 |
|
BS EN ISO 15877-5-2004 |
冷热水装置用塑料管道系统.氯化聚氯乙烯.系统的适用性 |
|
BS EN ISO 15882-2003 |
保健产品的消毒.化学指示剂.选择、使用指南和效果说明 |
(Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results) |
BS EN ISO 15902-2005 |
光学和光子学.衍射光学.词汇 |
|
BS EN ISO 15908-2003 |
热塑性管道系统用胶粘剂.胶粘剂热稳定性测定的试验方法 |
(Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives) |
BS EN ISO 15913-2000 |
水质.固相萃取和衍生化作用后气相色谱-质谱法测定包括苯达松和羟基苯甲腈在内的选择性苯氧烷类除草剂 |
(Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivat) |
BS EN ISO 15927-1-2003 |
建筑物的温湿性能.气象数据的计算和表示.单一气象素的月均值 |
(Hygrothermal performance of buildings - Calculation and presentation of climatic data - Monthly means of single meteorological elements) |
BS EN ISO 15973-2001 |
带断裂拉伸心轴和突出头的封闭和沉头铆钉 |
(Closed and blind rivets with break pull mandrel and protruding head - AIA/St) |
BS EN ISO 15974-2001 |
带断裂拉伸心轴和埋头紧固件的封闭和沉头铆钉 |
(Closed and blind rivets with break pull mandrel and countersunk head - AIA/St) |
BS EN ISO 15975-2002 |
封闭型盘头心轴盲铆钉.AI/AIA |
(Closed end blind rivets with break pull mandrel and protruding head - AI/AIA) |
BS EN ISO 15976-2002 |
封闭型盘头心轴盲铆钉.St/St |
(Closed end blind rivets with break pull mandrel and protruding head - St/St) |
BS EN ISO 15977-2002 |
敞口式盘头心轴盲铆钉.AIA/St |
(Open end blind rivets with break pull mandrel and protruding head - AIA/St) |
BS EN ISO 15978-2002 |
敞口式沉头心轴盲铆钉.AIA/St |
(Open end blind rivets with break pull mandrel and countersunk head - AIA/St) |
BS EN ISO 15979-2002 |
敞口式盘头心轴盲铆钉.St/St |
(Open end blind rivets with break pull mandrel and protruding head - St/St) |
BS EN ISO 15980-2002 |
敞口式沉头心轴盲铆钉.St/St |
(Open end blind rivets with break pull mandrel and countersunk head - St/St) |
BS EN ISO 15981-2002 |
敞口式盘头心轴盲铆钉.AIA/AIA |
(Open end blind rivets with break pull mandrel and protruding head - AIA/AIA) |
BS EN ISO 15982-2002 |
敞口式沉头心轴盲铆钉.AIA/AIA |
(Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA) |
BS EN ISO 15983-2002 |
敞口式盘头心轴盲铆钉.AZ/AZ |
(Open end blind rivets with break pull mandrel and protruding head - A2/A2) |
BS EN ISO 15984-2002 |
敞口式沉头心轴盲铆钉.AZ/AZ |
(Open end blind rivets with break pull mandrel and countersunk head - A2/A2) |
BS EN ISO 1599-1999 |
塑料.醋酸纤维素.模塑时粘度降低的测定 |
(Plastics - Cellulose acetate - Determination of viscosity loss on moulding) |
BS EN ISO 16017-1-2001 |
室内空气、环境空气和工作场所空气.用吸附管/热解吸/毛细管气相色谱法对挥发性有机物进行分析和取样.抽吸式 |
(Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling) |
BS EN ISO 16017-2-2003 |
室内、环境和工作场所空气.用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析.扩散取样 |
(Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling) |
BS EN ISO 16021-2001 |
吸尿辅助器.从使用者和护理者的角度评价失禁成人用一次性吸尿辅助器的基本原则 |
(Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers) |
BS EN ISO 16032-2004 |
声学.建筑物中辅助设备的声压级测量.工程法 |
|
BS EN ISO 16048-2003 |
耐腐蚀不锈钢紧固件的钝化 |
(Passivation of corrosion-resistant stainless-steel fasteners) |
BS EN ISO 16054-2001 |
外科植入物.外科植入物的最小数据组 |
(Implants for surgery - Minimum data sets for surgical implants) |
BS EN ISO 16070-2002 |
石油和天然气工业.下降孔设备.锁紧心轴和着地螺纹接头 |
(Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples) |
BS EN ISO 16091-2003 |
航天系统.统一的后勤支持 |
(Space systems - Integrated logistic support) |
BS EN ISO 16101-2004 |
包装.危险物品的运输包装.塑料可混用性检验 |
|
BS EN ISO 16104-2003 |
包装.危险物品的运输包装.试验方法 |
(Packaging - Transport packaging for dangerous goods - Test methods) |
BS EN ISO 16140-2003 |
食品和动物饲料的微生物学.代替法的验证协议 |
(Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods) |
BS EN ISO 16147-2002 |
小艇.艇内柴油发动机.装在发动机上的燃油和电气件 |
(Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components) |
BS EN ISO 1624-2002 |
塑料.氯乙烯均聚物和共聚物树脂.水滤筛析 |
(Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water) |
BS EN ISO 1628-1-1998 |
塑料.用毛细粘度计测定稀释溶液中聚合物的粘度值.一般原理 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles) |
BS EN ISO 1628-2-2000 |
塑料.用毛细粘度计测定稀释溶液中聚合物的粘度值.聚氯乙烯树脂 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins) |
BS EN ISO 1628-3-2004 |
塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.聚乙烯和聚丙烯 |
|
BS EN ISO 16284-2001 |
眼科光学.眼科光学设备的信息交换 |
(Ophthalmic optics - Information interchange for ophthalmic optical equipment) |
BS EN ISO 16330-2003 |
往复式正排量泵和泵装置.技术要求 |
(Reciprocating positive displacement pumps and pump units - Technical requirements) |
BS EN ISO 16348-2003 |
金属和其他无机涂层.定义和表观约定 |
(Metallic and other inorganic coatings - Definitions and conventions concerning appearance) |
BS EN ISO 16408-2004 |
牙科学.口腔卫生产品.口腔冲洗 |
|
BS EN ISO 16426-2002 |
紧固件.质量保证体系 |
(Fasteners - Quality assurance system) |
BS EN ISO 16467-2004 |
包装.危险货物的运输包装.IBCs的试验方法 |
|
BS EN ISO 16484-2-2004 |
建筑物自动化和控制系统.硬件 |
|
BS EN ISO 16484-3-2005 |
建筑物自动化和控制系统.功能 |
|
BS EN ISO 16484-5-2003 |
建筑自动化和控制系统.数据通信协议 |
(Building automation and control systems - Data communication protocol) |
BS EN ISO 16582-2002 |
敞口式盘头心轴盲铆钉.Cu/St or Cu/Br or Cu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt) |
BS EN ISO 16583-2002 |
敞口式沉头心轴盲铆钉.Cu/St or Cu/Br or Cu/SSt |
(Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt) |
BS EN ISO 16584-2002 |
敞口式盘头心轴盲铆钉.NiCu/St or NiCu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt) |
BS EN ISO 16585-2002 |
封闭式盘头心轴盲铆钉.A2/SSt |
(Closed end blind rivets with pull mandrel and protruding head - A2/SSt) |
BS EN ISO 1660-1996 |
技术制图.外形尺寸公差 |
(Technical drawings - Dimensioning and tolerancing of profiles) |
BS EN ISO 16654-2001 |
食品和动物饲料的微生物学.大肠杆菌0157检测的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157) |
BS EN ISO 1666-1998 |
淀粉.水含量的测定.烘箱干燥法 |
(Starch - Determination of moisture content - Oven-drying method) |
BS EN ISO 16663-1-2003 |
捕鱼网.网眼尺寸测定的试验方法.网眼孔 |
(Fishing nets - Method of test for the determination of mesh size - Opening of mesh) |
BS EN ISO 16663-2-2003 |
捕鱼网.网眼尺寸测定的试验方法.网眼长度 |
(Fishing nets - Method of test for the determination of mesh size - Length of mesh) |
BS EN ISO 16671-2003 |
眼科植入物.眼外科冲洗法 |
(Ophthalmic implants - Irrigating solutions for ophthalmic surgery) |
BS EN ISO 16672-2003 |
眼科植入物.眼内填塞 |
(Ophthalmic implants - Ocular endotamponades) |
BS EN ISO 1675-1998 |
塑料.液态树脂.比重计法测定比重 |
(Plastics - Liquid resins - Determination of density by the pyknometer method) |
BS EN ISO 1680-2000 |
声学.旋转电机发出的气载噪声的测量试验规范 |
(Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinery) |
BS EN ISO 16812-2003 |
石油和天然气工业.壳管式热交换器 |
(Petroleum and natural gas industries - Shell-and-tube heat exchangers) |
BS EN ISO 16851-2005 |
织物输送带.环式(拼接)输送带的净长度测定 |
|
BS EN ISO 16871-2003 |
塑料管道系统.塑料管道和配件.直接(自然)风化法 |
(Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering) |
BS EN ISO 16931-2001 |
动植物脂肪和油.高效尺寸筛析色谱法(HPSEC)测定聚合甘油三酸酯含量 |
(Animal and vegetable fats and oils - Determination of polymerized triglycerides content by high performance size-exclusion chromatography (HPSEC)) |
BS EN ISO 1716-2002 |
建筑产品耐火反应试验.燃烧热的测定 |
(Reaction to fire tests for building products - Determination of the heat of combustion) |
BS EN ISO 17186-2003 |
皮革.物理和机械试验.表层厚度的测定 |
(Leather - Physical and mechanical tests - Determination of surface coating thickness) |
BS EN ISO 17189-2003 |
黄油、食用油乳剂和可涂油脂.脂肪含量的测定(参照法) |
(Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method)) |
BS EN ISO 172-1980 |
塑料.酚-甲醛模塑.游离氨的检验 |
(Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia) |
BS EN ISO 17227-2003 |
皮革.物理和机械试验.皮革耐干热的测定 |
(Leather - Physical and mechanical tests - Determination of dry heat resistance of leather) |
BS EN ISO 17229-2003 |
皮革.物理和机械试验.水蒸气吸收率的测定 |
(Leather - Physical and mechanical tests - Determination of water vapour absorption) |
BS EN ISO 17233-2003 |
皮革.物理和机械试验.表面涂层低温龟裂温度的测定 |
(Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings) |
BS EN ISO 17235-2003 |
皮革.物理和机械试验.柔软性的测定 |
(Leather - Physical and mechanical tests - Determination of softness) |
BS EN ISO 17236-2003 |
皮革.物理和机械试验.伸长度测定 |
(Leather - Physical and mechanical tests - Determination of extension set) |
BS EN ISO 17249-2004 |
耐链锯切割的安全鞋靴 |
|
BS EN ISO 17287-2003 |
道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving) |
BS EN ISO 17292-2004 |
石油、石油化工和相关工业用金属球阀 |
|
BS EN ISO 17292-2004 |
石油、石油化工和相关工业用金属球阀 |
|
BS EN ISO 1735-2004 |
干酪及融化干酪制品.脂肪含量的测定.重力法(参照法) |
|
BS EN ISO 1736-2000 |
奶粉和奶粉制品.脂肪含量的测定.重量分析法(参照法) |
(Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)) |
BS EN ISO 1737-2000 |
淡炼乳和甜炼乳.脂肪含量的测定.重量分析法(参照法) |
(Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method)) |
BS EN ISO 1741-1995 |
葡萄糖.干燥处理重量损失的测定.真空法 |
(Dextrose - Determination of loss in mass on drying - Vacuum oven method) |
BS EN ISO 1746-2001 |
橡胶或塑料软管和管件.弯曲试验 |
(Rubber or plastics hoses and tubing - Bending tests) |
BS EN ISO 17495-2003 |
水质.选定的硝基苯酚的测定.具有质谱探测的固相萃取和气相色谱法 |
(Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection) |